Determine the present QWERTY keyboard?

Similar Questions

• My Apple Smart Keyboard (Azerty) switches to Qwerty when I select the UK English keyboard

  I bought an iPad Pro 9'7 and until yesterday, I have not used the Smart Apple, that the native Apple keyboard keyboard in IOS. I'm leaving in a country speaking French, so I'm used to the QWERTY keyboard, and the Smart QWERTY keyboard did not yet, until recently. I just bought my Smart Keyboard QWERTY, which is now available. I run immediately in the keyboard configuration problems.

  With the native IOS software keyboard, I installed 3 keyboards: French, Dutch and English British and I've set up Dutch and British English for QWERTY. It has worked well. I was able to take advantage of the spell checking in all languages, while keeping the AZERTY keyboard layout. I am constantly moving between these languages, while it was important for me to be able to switch between languages, while keeping the Azerty layout

  On my new Smart Azerty keyboard, I can easily switch between languages using the button 'globe' on the left side of the keyboard, but as soon as I switch to British English or Dutch, the keyboard will automatically switch to the Qwerty. I checked my settings of the iPad has not changed: Dutch and English British are always set to Azerty. If I'm getting confused now.

  Of course, I could stick the french language as a framework for my keyboard, the smart keyboard would retain its built in QWERTY layout, but I would miss the spell check option.

  Any suspicion, the solution or work around it?

  Simply set French as the physical keyboard for English and Dutch in settings > general > keyboard > hardware keyboards.

• QWERTY keyboard full blackBerry Smartphones

  My phone has changed since a full keyboard to more like a normal phone and I can't find the setting to restore.

  I pressed the button menu and then options, but it doesn't give me any keyboard options.  How do change!  Thank you.

  Hello and welcome!

  Are you referring to the keyboard in portrait or landscape mode? In reality, the keyboard becomes what it should be based on the context, with the full qwerty keyboard only appears in the landscape. So if she is acting funny, it's probably just needed a reboot. With the machine running, remove the rear cover and remove the battery. Wait about a minute, then replace the battery and the cover. Power on and wait patiently through the long long long restart the process (perhaps as long as 10 minutes). See if things have cleared up. Like all computers, a normal restart can be a healthy thing.

  See you soon!

• QWERTY keyboard does not not on the Meadow

  I just got a new Palm Pre yesterday.  I got about 2 hours and the QWERTY keyboard has stopped working.  Does anyone have an idea what could be wrong.  I turned it off an on and made a 'phone Erase', but it did not work.  I'm very happy to play with my new phone, but now I'm dead in the water. Any help would be greatly appreciated!

  I'm if Bell and they will not exchange the phone!  I'm stuck with it.  They don't help me at all.

  I have a second phone, I intend to upgrade.  I seriously think to go with another brand of phone.

  What kind of deletion do you have? The total or partial clear operation?

  You can try the switch/ring switch reset to see if it can fix the problem.

  Press and hold the power switch, move the switch-ring 3 times and it will reset the PRE. See if this reset can solve the problem.

  You should try the interactive button on the PRE test to check the functionality of the keyboard.

  The application of interactive Tests takes you through a simple Diagnostics to test the hardware components of your phone.

  1. Open the Launcher and press Device Info.
  2. Press the more infobutton.
  3. Open the application menu and tap interactive Tests.
  4. Select the test you want to run.

  You can test the following components:

  • Physical buttons: testing the keyboard and the keys on the phone

  Take this test to see if the keyboard does not work.

• How to change the map to QWERTY qwerty keyboard layout

  Hello

  I need command line to change the keyboard of US in french

  I have also open a question in photon github repo to add the functionality of keyboard selected during installation

  How to change card to azerty · qwerty keyboard layout Number #44 · VMware/photon · GitHub

  Thank you

  Hello

  After searching on Google I found this,

  the tool that allow you to manipulate the keyboard is localectl, she is certain useful cmdline;

  to list the keymap avaible: > localectl list-keymaps

  to configure keymap: > localectl QWERTY keyboard together

  For more information https://wiki.archlinux.org/index.php/Keyboard_configuration_in_console

  Thank you.

• Bluetooth QWERTY keyboard on 200 with ICS

  Hello

  I have upgrated sucessufully to Tablet ICS to 200 (in France). It works very well.

  Rumors says that ICS supports Bluetooth QWERTY keyboards. Unfortunately, this is not true.

  I have connected a keyboard AZERTY of Motorola (since Toshiba does not have a keyboard).
  This keyboard is compatible with ANDROID and QWERTY. Usually, it connects to the tablet of Zoom from Motorola. However, it is considered as a QWERTY keyboard.

  I believe it works immediately with the Tablet from Motorola.

  It would be nice if Toshiba could think about the French language clients ANDS will provide 200 to with the ability to use an external QWERTY keyboard.

  Is there a procedure that I could follow or * freeware * that I could download to be able to use the AZERTY keyboard?

  Thank you.

  Hello

  I found an interesting post on the xdadevelopers page:
  http://Forum.xda-developers.com/showthread.php?t=1082408

  Perhaps, it can be useful.

• Is it possible to order a MacBook in Belgium with a QWERTY keyboard?

  I'm used to working with a QWERTY keyboard.

  In the past, it was possible to select an international United States keyboard while controlling your machine online. I can't find such an option for the MacBook.

  Is it possible to order online, of Belgium, a MacBook with a US International keyboard?

  The option is there:

  

• Switching applications during the presentation on a separate screen

  Hello

  No help available here would be much appreciated.

  I have the Mac connected to a video projector. Under system preferences / poster I have the 'mirror' screen of the Mac projector.

  I have two applications using the screen of the Mac: a spreadsheet (in mode full screen) and a Keynote presentation. I wish I could choose what is shown on the projector - the spreadsheet or Keynote presentation - and * easily * switch between the two.

  I'm having difficulties in reaching this goal. When I "play" the Keynote presentation, Keynote seems to get their hands on everything: the projector becomes 'Display format' and the Mac screen display "presenter". If, during the presentation, I need to momentarily display the worksheet on the projector, I leave the presentation of Keynote ("ESC") and to the spreadsheet on the Mac (the spreadsheet now displays on the projector). On the way back, I have to switch applications on the Mac, then press 'Play' on the Keynote presentation (the projector display now the presentation again).

  All this is fine except that it is long. It significantly breaks the tempo of the presentation session, the public gets distracted by what I do on the computer, and the emphasis is more.

  Ideally I would be able to spend what is shown on the projector (presentation of the worksheet for the presentation) with one or two at most, mouse clicks. I thought that I could do it by changing just the applications on the Mac, but, unfortunately, when the speech is 'Play' there is no way to access the docking station to change application.

  Does anyone know of a combination of Options of setting display, number of jobs defined on the Mac, the Keynote presentation options,..., which would allow this switch quick and easy?

  Thanks in advance.

  Use the application Switcher: the keyboard command is: command tab

• QWERTY keyboard?

  Can someone suggest a method/product/app to connect and use a reall, QWERTY keyboard full size with the Droid X?

  Thank you!

  This link was OK Dan.  But here is one, on the same site, especially for the Droid X.

  http://www.thepocketsolution.com/PSI-64019/Motorola+droid+X+wireless+keyboard.html

• Change the type of keyboard?

  Hey guys, I have recently reinstalled the keyboard on my N500 once touches short-circuited because of me, spilling some holy water on it (long story). I replaced it with a keyboard, I bought on Ebay, and it works fine. However, the arrangement of the function keys is different, and I can't understand why this is.

  For example, on my old keyboard up/down volume was F1/F2, whereas this keyboard is it mapped to the arrow keys left and right. The function F1 on this new keyboard is a Crescent Moon, which is worrying as it could trigger my dormant Lycanthropy.

  I checked and verified the purchase order, and it confirms that it is of the "we Layout", who must say that my previous keyboard and, therefore, the parameters of this laptop is configured for, was not the layout we. My questions are the following:

  (1) how the divine to the TRUE nature of this new presentation?

  (2) how can I change the settings to account for this revolution of edge nine, bleeding in keyboarding?

  Please check number of RUF of the old & new keyboard.

  You can't remap shortcuts, try using safe mode to check if the problem still persists.

• problem with the mouse and keyboard and windows update does not work

  Since last week to start the computer, I get an error message that the mouse and keyboard functions do not work. He then seeks the errors and then indicates that the service restarts. I want to fix this problem and according to Microsoft hardware, I should download "mkc.msi", which is missing from my computer, but when I do a search for a download, it always automatically directs me to the section "community". How can I correct this problem and get the appropriate download? I use Windows Pro 64 bit with IE 11 on an Acer laptop. I have the Acer site but it was a great help. Also, for the last 6 months, I could not update my computer windows update feature does not work and no error code is presented. I tried everything to restore or re-download the windows update feature, but nothing works, or I can't find a source. I got a blue screen 3 times indicating that windows must be updated and has been the reason for the blue screen. Unfortunately, I don't have a Windows 7 reinstall drive when restarting it spilled about 85 MG of data but not identify what has been dumped. Of course I could use help on this major problem as well even if it cannot be in the category correct community.

  Hello

  I understand that you are having trouble downloading MKC. MSI. I would certainly help you to fix this problem.

  Method 1:

  If you are referring to Microsoft Mouse and keyboard Center, then check out these links to download.

  Download mouse and keyboard Center to get the best out of Windows 8

  Mouse and keyboard Center 2.0 (formerly IntelliPoint and IntelliType Pro)

  Method 2:

  You can consult the following Microsoft article if you are unable to install the updates of Windows on the computer.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Is there a way to dynamically determine the number of parameters to a procedure side Server?

  Hello

  This is a helper method used to call a server-side function that traverses the bindVars parameter to fill the PARAMETERS of the function. Is there a way to dynamically determine the parameters input/output based on the procedure name in the stmt parameter? No member of the CallableStatement class looked promising, but the getParameterMetaData() in the PreparedStatement class method seemed it might be useful lead. However, I have not found any (yet) a detailed description of how to use it.

  protected Object callStoredFunction (int sqlReturnType, String stmt,

  Object [] bindVars) {}

  CallableStatement st = null;

  try {}

  // 1. Create a JDBC CallabledStatement

  St = getDBTransaction () .createCallableStatement)

  ("" start?: = '+stmt+ ";" end; ", 0);

  // 2. Register for the first variable binding for the return value

  st.registerOutParameter (1, sqlReturnType);

  If (bindVars! = null) {}

  // 3. Loop on values for the bind variables passed, if any

  for (int z = 0; z < bindVars.length; z ++) {}

  // 4. Set the value of vars binding provided by the user in the stmt

  st.setObject (z + 2, bindVars [z]);

  }

  }

  // 5. Set the value of vars binding provided by the user in the stmt

  st.executeUpdate ();

  // 6. Returns the value of the first variable binding

  Return st.getObject (1);

  }

  catch (SQLException e) {}

  throw new Aexception.getLocalizedMessage (e);

  }

  {Finally

  If (st! = null) {}

  try {}

  // 7. Close statement

  St.Close ();

  }

  catch (SQLException e) {}

  }

  }

  }

  James

  PreparedStatement.getParameterMetaData () subject is exactly what you need for this task.

  Once you have the ParameterMetaData you can ask how many parameters are present, and how they are. Parameters are numbered from 1 to n, and you can use ParameterMetaData.getParameterMode (1); to get the function of parameter 1. The modes are defined as static values of the ParameterMetaData object. Check out the doc at http://docs.oracle.com/javase/7/docs/api/java/sql/ParameterMetaData.html

  Timo

• How to determine the version of HP CIM?

  I wonder if anyone knows the command to determine what version of HP CIM runs on our ESXi servers?

  I don't have access to a multitude of HP at the present time, but you should be able to determine if and what version of suppliers CIM HP is installed by running

  esxcli list of vib software | less

  instead of "|" less"you can also try"| grep-i HP'or'| grep-i Hewlett'to the output of the filter.

  André

• How to determine the ROWNUM in a Master detail form

  Hello
  
  I work in a master detail form with controls and information in order of points; I have created a process that allows users to select a product on a tabular presentation ID and the next column is filled automatically with the Product Description.
  
  To achieve this, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
  
  < ul > I use a form tabular-created by Wizard, instead of manual tabular form; and < /ul >
  < ul > instead of using another page as a Popup to pass the parameter of the ROWNUM, I use a plugin called "tabular form Super LOV" which is a modified version of Super LOV the SkillBuilders who works on tabular forms. < /ul >
  
  The product ID is returned in the line by the plug-in; but in the case of the Description of the product, it is always returned in the first row; and my problem is that I don't know how to determine the line where the user clicked to call the plugin.
  
  I created an example in apex.oracle.com in case someone wants to look at:
  Workspace: ediazjorge
  User name: test
  Password: test
  App name: Sample App
  The app number: 1550
  
  BTW, I use Apex 4.1.1.00.23 and Oracle DB 10.3.2.
  
  Thanks in advance,
  
  Erick

  See what {message identifier: = 10436048}

  OR

  {message: id = 10458307}

  You must use something like below

  //in your case currIndex means the ROWNUM value you have
  $('input[name="f03"]')[currIndex].val('some thing')
  

  And for the jquery selector try this

  $('img[alt="Popup Lov"]')
  

• Determine the next deadline Date

  I have a table that contains the definition of the schedule, a schedule defines when a document should be submitted to a specific part. The definition of annex contains a start date and end date, a type of recurrence (is pointed it out a time or on a recurring schedule) and the frequency to which the document should be filed. The second table provides a history of comments, this option stores while it was due and when it was received. Earlier this month, pre-fill us the layout table with a list of records that will be due for the month. For example, on 1 September look us through all schedules and determine which ones would have a record due to a certain point in the 9/12 and then to create a record in the presentation table.
  
  I have questions, the calculated the tender documents list to work properly.
  
  The DDL and DML will be in a follow up post
  
  Here's the query I use currently and is unable to work properly.
  

       with schedules as (
         -- generate a list of valid permit schedules
         select s.schedule_id,s.submittal_frequency_months,s.recurrence_type,
         s.first_due_date,s.requires_approval,
         round(round(months_between(to_date('09/01/2012','mm/dd/yyyy'),s.first_due_date))/decode(s.submittal_frequency_months,0,1,s.submittal_frequency_months)) recurrence_number
         from permit p join schedule s on (p.permit_id=s.permit_id)
         where p.permit_id=nvl(:p_permit_id,p.permit_id)
         and p.permit_status_type_id=1 -- only active permit
         and s.recurrence_type in ('One Time', 'Recurring') -- submittals with a defined schedule
         and coalesce(s.last_due_date,sysdate) >= sysdate -- only submittals whose last due date has not passed, null last date included
         and trunc(s.first_due_date,'mm') <= to_date('09/01/2012','mm/dd/yyyy') -- only valid start dates
         --and round(round(months_between(to_date('09/01/2012','mm/dd/yyyy'),s.first_due_date))/decode(s.submittal_frequency_months,0,1,s.submittal_frequency_months)) >0
         )
       -- create a list of all potential due dates for these schedules
       select submittal_id_seq.nextval,schedule_Id,8,requires_approval,
       case 
        when recurrence_type='One Time' 
          then first_due_date
        when recurrence_type='Recurring' and trunc(first_due_date)=to_date('09/01/2012','mm/dd/yyyy')
          then first_due_date
        else add_months(first_due_date,(submittal_frequency_months*d.iteration)) 
       end next_due_Date,user,sysdate,user,sysdate
       from schedules cross join (select level iteration from dual connect by level <= (select max(schedules.recurrence_number) from schedules)) d
       where schedules.recurrence_number <=d.iteration
       and 
       trunc(case 
        when recurrence_type='One Time' 
          then first_due_date
        when recurrence_type='Recurring' and trunc(first_due_date)=to_date('09/01/2012','mm/dd/yyyy')
          then first_due_date
        else add_months(first_due_date,(submittal_frequency_months*d.iteration)) end,'mm') = to_date('09/01/2012','mm/dd/yyyy') -- limit the records to the date in question
       and not exists
       (select null from submittal sub
        where sub.schedule_id=schedules.schedule_id
        and trunc(sub.due_date,'mm')=to_date('09/01/2012','mm/dd/yyyy'))
        -- exclude those that already have a submittal record
  ;

  Basically I found all possible records in the table in the annex that could have a record expected in September, and then generate a result for all possible instances and then look at only those whose calculated due date is 01/09/2012. I have determined that the root problem, I have right now is this line:
  
  
  (select level iteration of double connect by level < = (select max (schedules.recurrence_number) of planning)) d
  
  ID of the 469907 planning has a start date of 15/05/1992 and a frequency of all 2 months. I calculate what I call the number of recurrence, i.e. the number of times that the calendar has occurred since its beginning now. I use to make a calculation of add_months from the start date and then finally compare the start dates of these calculated with my month of target (09/12). In this one case records the calculated number of recurrence is 122. Then when I generate the connect by level is 122 records for each schedule, so I end up with duplicate records in the presentation for many schedule table. This current request could probably work if I could find a way to make the specific annex level ID, but I did not that far.
  
  Besides the fact that it returns erroneous results, I think that there must be a better, more efficient method to determine which records are due for a given month. I thought there are probably some great way to use the clause type here, but I don't have a knowledge on that one yet.
  
  If you run the insert statement what follows, you will see that it inserts more than 2,400 records:

  insert into submittal (submittal_id,schedule_id,submittal_status_type_id,requires_approval,due_date,created_by,created_date,modified_by,modified_Date)
       with schedules as (
         -- generate a list of valid permit schedules
         select s.schedule_id,s.submittal_frequency_months,s.recurrence_type,
         s.first_due_date,s.requires_approval,
         round(round(months_between(to_date('09/01/2012','mm/dd/yyyy'),s.first_due_date))/decode(s.submittal_frequency_months,0,1,s.submittal_frequency_months)) recurrence_number
         from permit p join schedule s on (p.permit_id=s.permit_id)
         where p.permit_id=nvl(:p_permit_id,p.permit_id)
         and p.permit_status_type_id=1 -- only active permit
         and s.recurrence_type in ('One Time', 'Recurring') -- submittals with a defined schedule
         and coalesce(s.last_due_date,sysdate) >= sysdate -- only submittals whose last due date has not passed, null last date included
         and trunc(s.first_due_date,'mm') <= to_date('09/01/2012','mm/dd/yyyy') -- only valid start dates
         --and round(round(months_between(to_date('09/01/2012','mm/dd/yyyy'),s.first_due_date))/decode(s.submittal_frequency_months,0,1,s.submittal_frequency_months)) >0
         )
       -- create a list of all potential due dates for these schedules
       select submittal_id_seq.nextval,schedule_Id,8,requires_approval,
       case 
        when recurrence_type='One Time' 
          then first_due_date
        when recurrence_type='Recurring' and trunc(first_due_date)=to_date('09/01/2012','mm/dd/yyyy')
          then first_due_date
        else add_months(first_due_date,(submittal_frequency_months*d.iteration)) 
       end next_due_Date,user,sysdate,user,sysdate
       from schedules cross join (select level iteration from dual connect by level <= (select max(schedules.recurrence_number) from schedules)) d
       where schedules.recurrence_number <=d.iteration
       and 
       trunc(case 
        when recurrence_type='One Time' 
          then first_due_date
        when recurrence_type='Recurring' and trunc(first_due_date)=to_date('09/01/2012','mm/dd/yyyy')
          then first_due_date
        else add_months(first_due_date,(submittal_frequency_months*d.iteration)) end,'mm') = to_date('09/01/2012','mm/dd/yyyy') -- limit the records to the date in question
       and not exists
       (select null from submittal sub
        where sub.schedule_id=schedules.schedule_id
        and trunc(sub.due_date,'mm')=to_date('09/01/2012','mm/dd/yyyy'))
  ;

  You can see the problem after the words:

  select schedule_id,count(0)
  from submittal
  where trunc(due_date,'mm')=to_date('09/01/2012','mm/dd/yyyy')
  and submittal_status_type_id=8
  having count(0) >1
  group by schedule_id;

  Tony

  Hello

  I think you want something like Bob solution. To avoid any computation MONTHS_BETWEEN again and again, you can do it once, in a subquery, like this:

  WITH     got_month_num     AS
  (
       SELECT     schedule_id, rec_type, rec_months, first_due_date
       ,     MONTHS_BETWEEN ( TRUNC (SYSDATE,        'MONTH')
                        , TRUNC (first_due_date, 'MONTH')
                        )       AS month_num
       FROM    schedule
  --     WHERE     ...     -- If you need any filtering, put it here
  )
  SELECT     schedule_id, rec_type, rec_months, first_due_date
  ,     ADD_MONTHS (first_due_date, month_num)     AS this_due_date
  ,     FLOOR ((month_num + 1) / rec_months)     AS iteration
  FROM     got_month_num
  WHERE     MOD ( month_num
           , CASE
                 WHEN  rec_type = 'Rec'  THEN  rec_months
                                  ELSE  month_num + 1
             END
           ) = 0
  ;
  

  The WHERE clause in the main query ensures that you will only get results that have a current month end_date.

  Using the sample data that Bob posted, the result is:

  SCHEDULE_ID REC REC_MONTHS FIRST_DUE THIS_DUE_  ITERATION
  ----------- --- ---------- --------- --------- ----------
            4 One          1 16-SEP-12 16-SEP-12          1
  

  Schedule_id = 1 is not due until January and schedule_id = 2 is not due until November.

  Published by: Frank Kulash, Sep 12, 2012 13:08
  Column corrected iteration. (You can't that column, anyway.)