Determine which drive is alert (infrastructure cartridge)

Similar Questions

• DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033). I'm not able to determine which driver is causing the problem

  I get a blue screen everytime I reboot my laptop.  I run Win Vista. The error I get is DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033).  I am not able to know which driver is causing this problem, please help.  Thank you

  In addition, it can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• HP HDX 18: Disk error 301 - how to determine which drive is phyiscal 1 as 2 drives are installed

  Hello

  The start-up of the PC, I get the message that "imminent disk failure.

  I passed all the tests and SMART's gives error 1720 SMART hard drive detects imminent failure

  It is on the main hard drive. containing drive C, D, E (recovery information

  However, there are 2 physical disks.

  Opening at the front of the PC next to me how what drive is the 1? The left or the right?

  Both drives are 60ZAT1-WD5000BEVT 500 GB each.

  Thanks for a quick response... .like I would replace the disk as soon as possible...

  Any recommended drive would be also appreciated...

  Thank you in advance...

  If you remove the disks, the berries are labeled inside. With the front of the laptop towards you, the primary drive is generally on the right and the secondary image on the left.

• Addition of drive letter to Infrastructure drives high capacity Notifications

  Is it possible to add a drive letter for notifications by e-mail for notifications of mail electronic Infrastructure module high-capacity disks? I'm on Foglight for SQL Server 5.6.5.2.  Currently, the email looks like this:

  Subject: db-sqllab1v-dev: Fatal: disk high capacity use 99.98%

  Fatal: db-sqllab1v-dev: disk high capacity use 99.98%

  Reported to Thu Aug 01 11:07:06 CDT 2013.

  Please use the following URL for details of the alarm.  http://...

  I would like to add the player to the body of the email or submit so our operations centre will have this information in the email before contacting our on call.  I see how to change the rules DBSS and alarms but does not know how to handle those in infrastructure cartridge included.

  This announcement was told http://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/f/4788/t/19558406#65762 .  I'll try Brian Wheeldon's response and see if I can make it work for me.  Thank you.

  Edit - tried this and it worked like a charm.  Moderators of the forum... can give you points to Brian for that?  Thank you!

  Post edited by: James Mertz

• Which driver Apple opens the door to disc in Windows 10?

  Which driver Apple opens the door to disc in Windows 10?  I have a Mac Pro 64 bit and updated since Windows 8.1 for Windows 10.  I've updated the Boot Camp Assistant support files and the door does not open.  I do not use the player a lot more, but it would be a pain to have to start on Mac, open the drive and Windows to use a boot disk. The F keys seem to work in Word.  Software update in Windows can find nothing more.  I could try to fix the driver if I knew that one...

  You are asking questions on the eject button and eject the optical discs? Can you put a picture of the specific training you are interested in?

• HP ENVY 17-j005tx Notebook PC: network card wireless Intel N 2230 sporadic but recurrent connection Wi Fi problems. Which driver to use?

  I have an old HP Envy computer of 12 months with a 2230 Intel® Centrino® wireless-N wireless adapter.

  In the last 6 months, the PC has suffered sporadic but recurrent problems of WiFi connection with the failure of the connection or drop-outs. The PC connects to the router, but fails to obtain or maintain an IP address. It has been with Intel driver version 15.12.0.6, pilot day February 25, 2014, installed by Windows Update, on June 16, 2014.

  When I contacted HP support on January 9, 2015, I have been instructed to download the software from the HP Web site. This driver has an HP publication date of 1 November 2013 and installed the driver version 15.10.0.12 with a release date of June 25, 2013.

  Updated Windows ran later that day there and I wanted to install the drivers updated Windows 8.1

  • Important update - update the Intel driver for Intel® Centrino® wireless-N 2230 published on 17/10/2013, 2.4 MB
  • Optional update - update the Intel driver for Intel® Centrino® wireless-N 2230 published 07/10/2014, 101.9 MB

  If Windows Update has been set to automatic the provided HP driver would likely have immediately deleted by Microsoft update.

  The Intel Web site offers the 15.14.0.1 or 15.14.0.2 driver version as the last driver for the adapter N-2230 but Intel "recommends obtain you and use the software provided by the manufacturer of your laptop. (even if it's more than a year to date)

  It's very complicated to have the latest version on the Intel site, older versions installed by Microsoft Update and even older versions on the HP website.

  If the user must install the OEM version, how the user to treat Microsoft Update overwriting the OEM version?

  Which driver should be used?

  Why didn't the driver software HP Support was updated to resolve known issues with this wireless card driver?

  HP would provide only a pilot who has been tested on the device that is installed on a particular type of material.

  Intel would release the driver first, but then it would take some time for HP to the test pilot and release it to the public for use on their units. Some customizations can apply in order to get the driver to work on the material.

• which driver to download for my hp probook 430 g1?

  which driver for wireless download for my hp probook 430 g1? in support, there are a lot of what I can download?

  I have a mediatek mt7630e

  Hello

  Yes, you are right, you said. I'm sorry for the lack.

  I see that there are two versions of the driver that can be used for your card Mediatek and it's the most recent:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5379212 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_122653_1%257CswEnvOID%253D4132%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  MediaTek and Ralink companies are now one after their merger.

  Please support me by clicking on the star of congratulations, if you like my post and "Accept as Solution" if my advice were answered or helped your situation. What are the best ways in which you can thank me.

  I am an employee of HP.

• Satellite C660d-102 Wlan does not appear in Device Manager - which driver?

  My Satellite C660d-102 wlan network adapter does not work it is not displayed in Device Manager...
  Which driver should be used to solve the problem?

  I am using Windows 7 64 bit on it...
  Tried my level best to install the wifi adapter...

  Please help: (...)

  Hello

  Laptop seems to support the Realtek RTL8188CE WLan card.
  You have the Realtek Wlan driver that you can download here.
  http://APS2.toshiba-tro.de/WLAN/

• Pavilion 15 J1R83EA #BCM: which driver from Realtek on this NTB was first

  Hi all can you someone tell me which driver from Realtek on this NTB was first? Because I Heve new driver and it's not good for my PC.

  Please tell me where I can find Audio driver to download it please.

  Thank you.

  P.S. Please write here something.

  Pavilion 15 J1R83EA #BCM need to Realtek HD Audio driver

  I found installers drivers in my PC C:\SWSetup\drivers

• Qosmio G40 - which driver can be used for remote control?

  Hello

  Which driver should I use for remote control?

  How to configure with the PC?

  Thank you very much.

  I assume that you need remote control manager.
  This tool is preinstalled on your Qosmio laptop?

• Satellite A100: Controller Ethernet missing - which driver should I use?

  He miss the Ethernet controller and can not use my network card / W - Lan... ideas which driver download to fix the problem? Am running XP
  Thanks Anke

  Hello

  Go to this webpage and download this driver. This is the driver of network, also known as controller ethernet etc.. Hope that solves your problem.

  http://it.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=it&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 624 & langua ge = 24 & selOS = all & selType = all & yearupload = & monthuploa d = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 19 & selectedLanguage = 24 & type = all & page = 1 & ID = 47467 & DISO = 10 & driverLanguag e = 42

• Which driver should be used to connect HP 34401 using RS 232

  Hello

  I'm using labview for the first time. I want to use the RS 232 cable to connect between Labview and HP 34401 multimeter. Which driver should be used for this purpose? Help, please.

  Thanks in advance!

  A search for the HP 34401A on the Instrument Driver Network reveals this page, which should have what you need. If you're using LabVIEW, you will want one of the first two projects.
  
  
  Also, for future reference, this board is for NI DMMs. For future instrument driver assistance, you will receive more timely and expert information on NI's Instrument Control forum.
  
  
  Please let us know if you require any further assistance.
  
  
  Thank you,
  
  
  Tobias
  Software Engineer
  Precision DC/Modular Instruments
  National Instruments
  

• should which driver I download? Help me

  Hello

  probook HP 4540 s base model

  my product number: A5S82AV

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
  PCI\VEN_1814 & DEV_3290 & CC_028000
  PCI\VEN_1814 & DEV_3290 & CC_0280

  should which driver I download?

  me the direct download link.

  Thank you

  Hi 14saba14

  MediaTek (Ralink) 802.11 b/g/n wireless network (WLAN) card

  Windows 7/8 (32/64-bit)

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66089.exe

  8.1 for Windows (32/64-bit)

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63302.exe

• HP Pavilion changeable: need help determine which laptop to buy

  I was hoping that somoene could help me determine which laptop is the best for me

  I have a powerful desktop computer, so I have no need for anything either super madly fancey-shmancy
  I really just want something that I can take with me on a business trip and inspired as I ask myself in bed

  I was watching the 13s (?) HP Pavilion x 360 convertible laptop
  Basically, I need a touchscreen laptop that can include:

  • Support a PRESSURE of the STYLUS pen
  • A kind of mode you can activate for that screen ONLY takes the stylus input.

    (Think if you draw on a sheet of paper, your hand is placed on the paper, but you're only drawing in pencil)

  And until someone offers Wacom - Yes, I have a Wacom tablet, I love it - but it is so awkward while your eyes focus on the monitor of drawing with your hand. The only other option would be to spend about $1300 for the Wacom tablet, I'd be interested - and WHY do that if I can buy a laptop touchscreen that serves more than one purpose?

  Hello

  Your MAIN one being styluscondition, I check an other way around and there is a list of (computer) HP produucts who can use HP pen/stylus

  http://h20386.www2.HP.com/AustraliaStore/merch/product.aspx?ID=J4R51AA&opt=&SEL=ACC

  Kind regards.

• How can I determine which applications and processes are turned on at first upward and how can I keep their autostart?

  My office of gateway using Windows XP takes a long time to start.  I hear a lot of activity because it starts and after a very long time, I can really use it.  I would like to know what process or applications start automatically and then determine which ones to move away and how.

  If you were to Google something like:

  XP boot manager

  You will get hits with links to managers of free starter like this simple:

  http://www.MLIN.NET/StartupCPL.shtml

  Another popular and free tool with a built-in startup manager (and other interesting things) are CCleaner which you can download here:
  http://www.Piriform.com/CCleaner

  CCleaner allows you to manage most of the startup items and also do some other operations oriented cleaning.  Some people will you recommend is not to use the registry functions in CCleaner to avoid these features for now.  I have no problem with it for me, but sometimes it's a contentious issue, I prefer to avoid as much as possible!

  You can uninstall CCleaner later if you don't like it.

  You can disable the startup items, see how things look and if you want - you just delete them (or leave it off).

  After launch of CCleaner and see what startup items you can disable/remove, if you are still not sure of your startup items, follow these steps:

  Run CCleaner and choose Tools, boot and bottom right, click on the button "Save to text file" to save the startup information in a text - something like startup.txt file

  Save the boot information text file on your desktop (or somewhere you can find it) open the text file with an editor (Notepad or WordPad), select all (Ctrl-A), copy text, all the text selected in the Windows Clipboard (Ctrl-C) and then paste (Ctrl + V) the contents of the startup list to come back here in your next reply and maybe someone can tell you another thing to consider.

  A more revealing startup Analyzer is Autoruns which will allow the manipulation of all sectors of boot and does not actually install anything:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I have zero startup items on my computer, so none of this is important to me!