Which driver Apple opens the door to disc in Windows 10?

Similar Questions

• How to open the system maintenance Troubleshooter in windows vista

  How to open the system maintenance Troubleshooter in windows vista?

  Hello

  Please be informed that Troubleshooting maintenance system was introduced from Windows 7.

  However, you can run the fixit mentioned below for Vista.

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  You can take a look at solving the problems of system maintenance in windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter

  For more information, please visit the links below.

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Optimize Windows Vista for better performance.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Warning of Chkdsk.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For the anti-virus scanning:

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• Cannot open the synaptics pointing device in windows vista, upgrades are far but message error, unable to connect to the synaptics pointing device

  Hi I have a problem with my mouse/pointer when I click on the mouse to open it I have error message unable to connect to the synaptics pointing device. Have you checked the updates that are up-to-date, and the driver is ok, not sure what to try next need to make any changes to the mouse pointer

  with Brice thanks.

  Hi paiyay,

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to open the synaptics pointing device in windows vista

  · You did changes to the computer before the show?

  · What happens when you click the Yes button in the error message?

  · You are able to use the mouse on the system?

  I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.

  http://www.Synaptics.com/support/drivers

  http://www.Synaptics.com/resources/drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Connect the hard disk, and then try running the fix tool of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  I suggest you to contact the mouse manufacturer for assistance. Click on the link below.

  http://www.Synaptics.com/

  See also:

  FAQ and troubleshooting

  http://www.Synaptics.com/resources/consumer-tips

• My question is how to open the system advanced settings in window 7 64-bit home preuim

  My question is how to open the system advanced settings in window 7 64-bit home preuim

  Hello

  Assuming you mean the Windows Advanced System Settings screen, then right click on my computer and choose Properties.  On the left side of the screen, you will see a link for the advanced system settings.

  You can also call directly my pressing the windows and R key (which will bring up the Run dialog box) and typing in control sysdm.cpl

  I would like to know how you, or if you want to say something else.

  Good luck & enjoy Windows 7
  Jon

  If this message was useful and allowed, please consider the vote and it offers as a response...

  My Blog - www.insidetheregistry.com

• The Firefox HELP tab keeps appearing whenever I open the application or a new window. Firefox 3.6.28, Mac OS 10.4.11

  The Firefox HELP tab keeps appearing whenever I open the application or a new window. Firefox 3.6.28, Mac OS 10.4.11

  Ah, apparently it's reading I wanted as long as home pages; When I reset my homepage it started working right.

  Thank you

• I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I'm probably not explaining my problem fairly - well, I scanned something in - I used Nuance Paperport.  I have it attached to an email and sent to six people - including myself.  I always open the attached file to make sure that the computer has sent the right thing.  When I tried to open the attachment I got the message "cannot open the file - I have already sent you."  I think that Norton Security got rid of the file I need.  I think I will contact them.  I tried to contact Nuance - but alas, my warranty has expired, so no help there unless I want to pay for it.  If I can't have the problem solved through Norton, I will contact you again.  Thank you very much for taking the time to try to help me.  Have a great Thanksgiving action!

  ================================================
  Your explanation was nice... that was my answer that failed.

  I was hoping that you would simply copy the scan of your temporary
  Internet files folder and paste it on your desktop. Then you might
  evaluate what is the problem. I thought that trying to open
  with such a long way email could be a problem. And also... it's possible
  be a file association problem. And it could be a matter of file size.

  I understand that you care why the attachment to the email
  failure and I think you need to find what is the problem with the scan
  before fastening will be successful.

• Can I open the 16-bit applications in Windows 8?

  Hi MS support team,

  I have a request for information with respect to a 16-bit application (made for the previous version of windows) running in Windows 8. The request is normally done using the old MS-DOS program in previous versions of windows. But when I opened the application using BACK of Windows 8 (64 bit) program, I got an error because of the incompatibility of the 16-bit application with the windows 64-bit versions. I also tried to run directly from Windows, but he did not. Attached below are pictures of the error and the properties.

  Is there a method to open this application in the platform BACK of Windows 8? Or other methods to run this application?

  Thank you for your help.

  Kind regards

  Jimmy

  

  

  

  Monday, January 6, 2014 13:27:01 + 0000, Jimmyh123 wrote:

  I have a request for information with respect to a 16-bit application (made for the previous version of windows) running in Windows 8. The request is normally done using the old MS-DOS program in previous versions of windows. But when I opened the application using BACK of Windows 8 (64 bit) program, I got an error because of the incompatibility of the 16-bit application with the windows 64-bit versions. I also tried to run directly from Windows, but he did not. Attached below are pictures of the error and the properties.

  64-bit Windows 8 cannot run 16-bit programs. the only way to do
  you want is to install a virtual machine and run it.

  If possible, the best solution would be to get a newer 32 - bit or
  64-bit version of the program.

• Failed to open the first Pro CC 2015.Windows are unable to connect to the Adobe server... This application failed to start properly 0xc000001d... Click ok to close the application

  Failed to open the first Pro CC 2015.Windows are unable to connect to the Adobe server... This application failed to start properly 0xc000001d... Click ok to close the application

  Hi qksdjhfb,

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• I CS6 master collection when I try to open the first, I get a window subscription renew telling me my CC trial expired - I have purchased and registered CS6, how is that I can't open it?

  I CS6 master collection when I try to open the first, I get a window subscription renew telling me my CC trial expired - I have purchased and registered CS6, how is that I can't open it?

  Looks like you may have installed creative cloud and run CS6 from there. Please see this link:

  'Renew your membership' window appears when you launch a creative cloud application
  Using creative cloud | 'Renew your membership' window appears when you launch a creative cloud application

  If you completed a trial and want more creative cloud, you must uninstall it, run the cleanup tool, and then reinstall your CS6.

  These links may help:

  Using creative cloud | Download, install, update or uninstall applications

  Use the CC cleaning tool

  Guinot

• StageWebView opens the link in a new window

  I have a StageWebView with a Web page that contains the ads that are coming from AdMob (due to their current lack of support for AS3 and AIR for Android).

  However, when a user clicks on the ad, the linked page opens in this window, so the content is barely readable. Is there a way to make the browser to open the link in a new window, separated from my application?

  Of course the AdMob ads were not intended to work in this way, the user and the adveriser are here get cheated (due to lack of current AdMob to support AS3 and AIR for Android).

  Thank you!

  Yes:

  1. Listen to the event of change of location
  2. Use navigateToURL (event. URL)
  3. Reset the stageWebView to your announcement page location.

• Portege M700 - DVD drive fails during the recording of discs

  Hello

  I tried the Disc Creator that came pre-installed and also Nero 9.2.6.0. All this on Vista 32 bit.

  The latter seems to have no idea about the problem, as it says smething like unknown failure.

  The creator of disc mentions error code 380381-26-BF040304.

  The problem occurs only at the beginning, I tried with three discs, so I don't think that the disks are the problem. In any case, they are DVD + R DL Verbatim and support up to 8 x, while the recorder goes only up to 4 x for the double layer, so I think I'm ok.

  My suspicion is that maybe the firmware in the DVD version needs update... He mentions Hw 1.00, 1.10 Fw. Other manufacturers of laptop as offer updated firmware DVD for her, but I couldn't find one of TOSHIBA.

  Any ideas?

  See you soon

  Hello

  There are several disks for Portege M700, they are compatible. Usually in the user manual, you can find a list of supported CD/DVD players they are pre-tested by Toshiba and work correctly.

  If you have any other questions about a new drive, ask the service provider authorized in your country. They can offer you a compatible player.

• My c7280 all-in-one tells me to "open the door, clear cartridge Jam".

  -J' tried the doors and came out all ink cartiridges... which door? and what I am doing wrong?

  Since the error message you received, I see you have a transport problem Jam.  Have you looked inside the printer, to the right of the cart that contains the ink cartridges, to check that it is not a small amount of paper in the printer?

  Thus, there are additional steps to troubleshoot a carriage jam, found here, in the document provided by HP.  I hope this helps.

• DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033). I'm not able to determine which driver is causing the problem

  I get a blue screen everytime I reboot my laptop.  I run Win Vista. The error I get is DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033).  I am not able to know which driver is causing this problem, please help.  Thank you

  In addition, it can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• How to set which page to open the

  Hello

  Can someone tell me how to set the property (which one?) so the pdf document opens on a specific page?

  I just can't understand how to use the reference. There is a GoTo, which is maybe what I'm looking for for (?), but how do I call/set it?

  (no, it is not pageNum in the doc object)

  Thank you!

  This can be set using JavaScript. What you can do, however, is to incorporate a script at the level of the doc in the file that will go to the page you want when the file is opened. The script would simply:

  this.pageNum = 0;

  (or whatever number you want...)

  If you want to add this code with a script, use the addScript method, as follows:

  var goToPageScript = "this.pageNum = 0;";

  this.addScript ("GoToPage", goToPageScript);

• L50t-A-145 - angle which satellite is opening the lid?

  Hi guys,.

  I'm considering the purchase of a Satellite L50t-A-145, but I really need the cover/display to open at 135 °. The reason for this, I'm a DJ and have a Tablet laptop at 45 °, so with the laptop that I need the screen to go to 90 °, plus another 45 ° to take the screen vertically.

  Can anyone of you let me know what kind of angle opened the l50 to? Today, it is difficult to get any laptop to exceed 120 ° due to the modern design of hinge, the real pain for all those who want to open more.

  Thank you.

  Operating instructions, you can find the info that the screen can be opened to a wide range of angles for optimal playback, but it does not provide the values accurate Angel.

  My Satellite U500 cover can be opened at about 120 °, but Max.
  I guess that the same values would be available for L50T too.