dev c++ compile problems
Hallow's end:
IAM beginner in c programming and iam using dev c ++ compiler work good for me when I write my own code, but when I download some source codes from the internet and try to compile it there give me a lot of errors is so I want to know is this a compiler problem or what?
Tags: Windows
Similar Questions
-
removal of the compiler problem markers
An internal error occurred during: "Remove markers compiler problem..." ».
java.lang.NullPointerException
FB 4.5. I know that the old FB has a .markers file you could delete, but where 4.5 keep these?
Sometimes, the markers disappear with 'clean', but not always.
Richard
I have created a new workspace, imported all my projects, and the problem by removing the errors disappeared, for now.
-
cRIO-9024 + chassis 9113 NOR + NOR 9881 (CANopen) FPGA compile problem
Hello
I started to learn the Labview and I want to communicate with CANopen (9881) interface FPGA module, but there is a problem.
Normally (without NI 9881), I can compile and run a VI file with FPGA interface, BUT after adding 9881 (in the slot1) to the chassis (9113) I can not compile any VI (same same file VI) with worker compilation. Even if I delete the Mod1 (Slot1, NI 9881) of the project, I can compile the file VI.
I need compile bit files in order to use the library can open, but I could not find the problem.
Can someone help me? Thank you.
The error is below to:
...
Analysis of
entities.
Architectureanalysis of the entity.
ERROR: HDLCompiler:849 - "D:\NIFPGA\jobs\g8Q6537_ibm705i\CcMuxSLN.vhd" line 794: Unexpected EOF.
File VHDL D:\NIFPGA\jobs\g8Q6537_ibm705i\CcMuxSLN.vhd ignored errorsHi Matt,
I uninstalled everything about LabVIEW and reinstalled, I did update, now the problem is solved. It compiles the file bit.
Thank you.
-
Momentics Login password for the Dev Alpha BB10 problem
Hello.
I deploy my applications dev alpha BB10 using debugging tokens. Device is in development Mode. Computer detects the device. Debug a valid token. Password is defined.
Question: Quick refuses my password, says that it is "invalid". Does not record.
However, when I deploy, I started having a "quick Login". When I enter the same password, it says it is invalid.
I feel
(1) Momentics crash or config file is corrupted and not to recognize what I type in
(2) something else?
Everyone knows about this problem? Do you know a fix?
Thank you.
Restarted my computer and it worked!
-
BBM on BB10 Dev alpha B problem
Hey guys.
I'm pretty new to this Blackberry thing (got my Dev Alpha on a Jam Session, it was great), this is my first Blackberry device (frankly, I don't like Blackberry pre-10) and I tried to integrate my BBM app, but I have not been able to access all the BBM. I tried re-flashing the unit and using a different BBID unsuccessfully, BBM opens with a "Temporary server error" screen, and the only option I get is to exit the application.
Friends (who also have been on the Jam session and got their devices) tell me they didn't need anything else that WiFi for that BBM works, so I was really puzzled. If I have in some way did do something wrong?, Blackberry icon is displayed next to the WiFi, is it not enough for BBM work on the Dev Alpha?
Thanks in advance.
This problem has been resolved. You may need to reset your BlackBerry 10 Dev Alpha if you continue to receive this error.
-
Form builder compile problems (BEGINNER)
Hello
I am very new to ORACLE. never deal with oracle, or heard of him.
I'll be very grateful if you guys could help me solve this problem.
IT'S MORE FORM BUILDER ORACLE 6i.
When I open the form compiler I get the following warnings. I don't know what to do with it. I tried searching online but no luck.
As you are new to Oracle Forms, first your need to know what it is.
A tutorial on Oracle9i forms and reports
iSelfSchooling - Introduction to forms
Form of Oracle 10 g: demos, tips, and Techniques
---
-video
To open an existing one, you need to run the form builder NOT compiler
Hope this helps
Hamid
-
Campus solution 9.0: COBOL Compilation problem
People,
Hello. I implement PeopleSoft 9.0 Solution on a University Campus. My operating system is Oracle Linux 5 with 8.53 PeopleTools.
Because the academic records & registration module requires a COBOL program, I downloaded Micro Focus Server Express 5.1 Wrap Pack 6 for RedHat Linux x 86-64 delivery Oracle and installed successfully. Then I compiled the sources COBOL and get the error like below:My home directory is opt/PT8.53/setup.
[root@userlinux setup]#./pscbl.mak
Beginning of the compilation in PS_HOME (/opt/PT8.53)
opt/PT8.53/Setup/pscbl_mf. MAK: convert all files to Unicode...
Summary of conversion for the Source Codes to:
Source: /opt/PT8.53/src/cbl/
Target: /opt/PT8.53/src/cblunicode/
The same cob64: compile error: *.cblCP: cannot stat ' * .gnt ': no such file or directory
CP: cannot stat ' * .int ': no such file or directory
CP: cannot stat ' * .lst ': no such file or directoryopt/PT8.53/Setup/pscbl_mf. MAK: compilation *.cbl...
Micro Focus LMF - 006: you are not allowed to use this product or version. No license for this product or this version have been found in the database of licenses. Execution for this product has been stopped. Contact your license administrator or a supplier of Micro Focus products to obtain a license.
...
...
SRPCSMLS fail to compile
SRPCTART fail to compile
SRPCTCBP fail to compile
SRPCTCRC fail to compile
SRPCTCVA fail to compile
SRPCTDRB fail to compile
SRPCTDRV fail to compile
SRPCTEXT fail to compile
SRPCTOUT fail to compile
SRPCUSR1 fail to compile
SRPCUSR2 fail to compile
SRPCUSR3 fail to compile
SRPCWAIT fail to compile
SRPCWD fail to compile
SRPCWDPR fail to compile
SRPCWDRC fail to compile
SRPCWLPR fail to compile
SRPCWMSG fail to compile
SRPCWTRM fail to compile
SRPLOGMS fail to compile
SRPQUERC fail to compile
SRPQUEUE fail to compile
End of the compilation in PS_HOME (/opt/PT8.53)
[root@userlinux setup] #.
My question is:I have to buy a license for Micro Focus Server Express 5.1 Wrap Pack 6 for RedHat Linux x 86-64 in order to compile the COBOL sources?
If so, how do I purchase the license?
Thanks in advance.People,
Hello. I used the temporary 30 day license to compile the COBOL source successfully. The problem is resolved. Thank you.
-
Parameter is incorrect compilation problem
Hello
I am really pulling my hair on it. I have a flex using Flash Builder 4.5.1 project that uses the BlazeDS remoting services.
I run my Flash Builder inside an Oracle VirtualBox VM (Windows XP) because I am a user of Ubuntu. I was fortunately compilation and deployment for a couple of months without hassle.
Recently I got a new laptop. I have my VM has exported and imported on the new laptop. All of a sudden my project when compiling gives me an error: 'the parameter is incorrect' location 'unknown '.
If I create a simple project from scratch, it compiles very well without any problems. I can then navigate to my service of BlazeDS, add it - but as soon as I am referring to this service in my component - the component compiles well but on the project level, it gives the above error.
I've looked everywhere for a more detailed version of the error: but nothing.
Help please!
Rgds,Willem.
So for those interested, I solved this problem by creating another vacuum of virtual Windows machine, reinstall Flash Builder and re-import my project.
It seems that Adobe Flash Builder has built something obscure that dislikes you migrate a virtual computer to another host. I did unregister and re - register my product between the virtual machine, incidentally - that does not work.
-
Before Update trigger compilation problem
Hello experts! I have a problem compiling of a trigger, that I am creating.
In fact it should be updated INT_INITIAL with the old value of INT_LOCK.
Compilation fails and the debugger triggers an error ORA 01747 (invalid statement for table use, column user etc.)
Do you have an idea of what's wrong with my code?
Kind regardscreate or replace TRIGGER TRIGGER_INT_INITIAL BEFORE UPDATE ON TBL_MATRIX_INTERMEDIATE_RESULT FOR EACH ROW Begin IF NVL(:new.INT_INITIAL, 0) != :old.INT_LOCK THEN UPDATE TBL_MATRIX_INTERMEDIATE_RESULT set :NEW.INT_INITIAL = :old.INT_LOCK; END IF; END;
SEBHi Seb,
You should not be doing an UPDATE, just do an assignment:
create or replace TRIGGER TRIGGER_INT_INITIAL BEFORE UPDATE ON TBL_MATRIX_INTERMEDIATE_RESULT FOR EACH ROW Begin IF NVL(:new.INT_INITIAL, 0) != :old.INT_LOCK THEN :NEW.INT_INITIAL := :old.INT_LOCK; END IF; END; /
Concerning
Peter -
BB Dev Alpha - another problem after security wipe
Initially, the unit has lost ability to connect on the computers (it's not recognized on any computer to which it was connected).
So I decided to do a security wipe. After the wipe whenever the phone tried to load the operating system, the progress has reached 100% and stopped. I downloaded the autoloader driver DevAlpha A / B 10.1.0.1485 and tried to reinstall the operating system with its help, but he refused to install with error messages "OS is not material", "this file does not match the device. Then, I downloaded an older version of dev alpha drivers (DevAlpha 10.0.10.263 autoloader), but he got the same errors.
After updating these attempts of the device reached the start progress 100%, then restarts, once and once more. Software link cannot start the firmware recovery process. It is also interesting that the device hardware ID is not listed here.
I have read a number of topics dealing with similar issues of DevAlpha on the support forums, but some of the solutions are outdated and others do not work for my device. Can someone give advice? Thank you
P.S. here is the log of 10.1.0.1485 driver:
C:\Downloads\Programs>Autoload-DevAlphaA_B-10.1.0.1485 RIM Wireless Device Command-Line Auto-Programmer Version 3.10.0.29 (Win32) [Apr 1 2013 19:59:10] Copyright 2012 Research In Motion Limited Connecting to Bootrom: Resetting Device: Connected [ Uploading RAM Image 0x80238984 ] [############## 100 ##############] QCFMv1/v2 Hybrid File containing: Radio Signature Trailer: EC521_512 Signer: 0x48584E51 (QNXH-OS-1) EC521_256 Signer: 0x4C584E51 (QNXL-OS-1) [ Writing 0x006E0000 ] [############## 100 ##############] QCFMv1/v2 Hybrid File containing: IFS, OS, User File System IFS/OS Version: 10.1.0.1485 DEV Hardware ID: 0x06001A06 RIM BlackBerry Device Metrics Version: 3.18 Build Date: Apr 13 2013 Build Time: 10:23:20 Build User: ec_agent STP Protocol Ver: 0.0.4 (release OS) Signature Trailer: EC521_512 Signer: 0x48584E51 (QNXH-OS-1) EC521_256 Signer: 0x4C584E51 (QNXL-OS-1) --> OS does not match hardware. (C: 0X06001A06 H: 0X8500240A O: 0X051D0001 ) Error: Failed to load images. Error: This file does not match this device!
And here is the log from 10.0.10.263:
C:\Downloads\Programs>Autoload-DevAlpha-10.0.10.263.exe RIM Wireless Device Command-Line Auto-Programmer Version 3.10.0.15 (Win32) [Dec 20 2012 22:31:59] Copyright 2012 Research In Motion Limited Connecting to Bootrom: Resetting Device: Connected [ Uploading RAM Image 0x8022E584 ] [############## 100 ##############] QCFMv1/v2 Hybrid File containing: IFS, OS, User File System IFS/OS Version: 10.0.10.263 DEV Hardware ID: 0x06001A06 RIM BlackBerry Device Metrics Version: 3.18 Build Date: Jan 27 2013 Build Time: 11:33:05 Build User: ec_agent STP Protocol Ver: 0.0.4 (release OS) Header Version: 2.0 Num Chunk Headers: 6 Headers Length: 65120 Chunk Header: Type: 0x06 Chunk Header: Type: 0x08 Chunk Header: Type: 0x06 Chunk Header: Type: 0x05 Chunk Header: Type: 0x09 Chunk Header: Type: 0x89 Signature Trailer: EC521_512 Signer: 0x48584E51 (QNXH-OS-1) EC521_256 Signer: 0x4C584E51 (QNXL-OS-1) --> OS does not match hardware. (C: 0X06001A06 H: 0X8500240A O: 0X051D0001 ) Error: Failed to load images. Error: This file does not match this device!
This means that you run z10 full os on your alpha dev b. To correctly flash has another version to it, make sure you download Z10 STL100-1 automatic loader, no Dev Alpha B one.
-
Update of dev Alpa - known problem 209454
Hi all
I just updated my Alpha of Dev machine with the latest version of the OS. But because of the known 209454. I'm unable to complete the installation. https://developer.blackberry.com/blackberry10devalphas/releasenotes.
Due to this device is unusable. Please, help me to make it as useful.
Its resolved. Device restart and its done
-
EBS 12.2 compile problem APPS schema
Hello
In my database as user apps, I use this command:
EXEC DBMS_UTILITY.compile_schema (pattern = > 'APPS');
But it never ends and the invalid number of objects is greater:
SQL > select count (*) from dba_objects where status = 'INVALID ';
COUNT (*)
----------
72678
SQL > select count (*) from dba_objects where status = 'INVALID ';
COUNT (*)
----------
73024
SQL > select count (*) from dba_objects where status = 'INVALID ';
COUNT (*)
----------
74876
What can I do? kill oracle process?
Thank you
Luis
Hello
It is best to use the apps schema to compile script adadmin or adutlrcmp.sql.
Using utlrp.sql does the job, too.
Kind regards
Bashar
-
Donkey causing compile problems - Air 3.9
My DONKEY I am train worked very well with several re - compiles, but then suddenly FB keeps complaining about this with the following message.
Any ideas?
Error occurred during the application of packaging:
For architecture armv7 httpd Undefined symbols:
"_vfrPdfReaderExtFinalizer", referenced from:
_g_com_adobe_air_fre_fmap in extensionglue.o
(maybe you meant: _vfrPdfReaderExtFinalizer_name)
"_vfrPdfReaderExtInitializer", referenced from:
_g_com_adobe_air_fre_fmap in extensionglue.o
(maybe you meant: _vfrPdfReaderExtInitializer_name)
LD: symbol not found armv7 architecture
Compilation failed during execution: ld64
Hello
Yes, I think that so... well, it worked for me several times today in any case!
I inserted an image in order to explain it.
Basically where you can select the output target, in my case where it says "VfrPdfReader" - you must select an output of the unit instead of an output of Simulator.
If I select a device Simulator type then the DONKEY generation fails with the message above. But, with him, selected according to my image below, the build works very well.
Very odd behavior... Let me know if it works for you too!
-
Trainer named blocks compilation problem
Hello
I noticed that setting the following preference in formatter...
Tools-> Preferences-> trainer sql-> oracle formatting-> whitespace-> spaces around operators (= <>+ - * /)-> a space: where a = b + c
cause named blocks will be defined as...
< < name-for-block > >
declare
variable declarations
Start
SQL statements
name block end;
to become...
< < name-for-block > >
declare
variable declarations
Start
SQL statements
name block end;
and therefore to compile failure due to space inserted between the < < and > > are characters like < < and > >
Can we change the trainer do to prevent this?
Thank you
AlanHi Alan,
Existing bug:
Bug 10217694 -< should="" not="" have="" space="" and="" should="" not="" align="" with="">-Turloch
Team SQLDeveloper -
Flash Builder 4.5.1 - compilation problem version release Flex Mobile
I am building a mobile application from flex using Flash Builder 4.5.1. The application works very well on the device (Nexus S) and office in debug mode however, whenever I export the Release version of what the app is not automatically installed on the device. When I manually install .apk it fails also (get the message from the Application that is not installed with the green check mark). Any thoughts?
The problem was with signing of certificate (.p12). As soon as I created a new certificate, everything worked took place.
Maybe you are looking for
-
Lenovo Vibe Z2 Pro Does not start
Hello My lenovo vibe z2 does not start. It was working well before go to bed last night, but when I woke up it was off and I am unable to turn it on. I tried to load it first in case the battery is down, but after 30 minutes of charge it still won't
-
Lenovo S660 take time to sync the apps.
a Lenovo S660 since more than a week now. After the last upgrade, it takes just hours to synchronize the e-mail or whatsapp or facebook. It informs the new mails/messeges hours later. ask yourself what the problem...
-
Upgrade windows vista to windows 10 without paying?
I am currently using windows vista. Is there a way to upgrade to windows 10 without paying?
-
The language module apply to the keyboard too?
I want to download the language pack for windows 7 for Russian, but I want to know if she just applies to the display language or keyboard too?
-
Video of Windows 8 gives the error message when I click on a video (for example, a video in Youtube). Audio, video devices and game control (AMD high definition Audio Device and ADT High Definition Audio CODEC) and GPU (AMD Radeon HD 7500 G) are all