[DEV] Kernel module for Open on Thinkpad Tablet TUN VPN support

Similar Questions

• ThinkPad Tablet 2

  Lenovo ThinkPad tablet 2 does support Linux? Fedora running on it would be cool.

  It should because it's x 86 platform. There are mixed reports as the graphics chip, I believe that atoms in TPT2 have VR graphics, not the intels so support driver so that it is not very good.

  Screen touch supprt improved lately too so it shouldn't present a big problem.

  I'd go with something lighter than fedora.

• "Could not open/dev/vmmon: no such file or directory." Please make sure that the "vmmon" kernel module is loaded. »

  I installed vmware Player on a linux Open Suse (32-bit), the supplied file .bundle machine. It worked very well, and I could load my file of virtual machine very well. Then, my machine had a random failure. When it restarts, I could no longer use my virtual machine, always get the error:

  "Could not open/dev/vmmon: no such file or directory."

  Please make sure that the "vmmon" kernel module is loaded. »

  I look in / dev, and of course, there is no vmmon. I see a lot of archived messages stating that you must run the script ' vmware - config.pl '... (more specifically the following link: ) http://blog.solutionperspectivemedia.co.UK/?p=6 )

  but I do not have it. It seems that maybe it was a part of the installation (no-bundle) more old?

  What should I do? Is this a known problem, as indicated in this Web site? Or random failure caused something? I'm quite confused.

  Have you tried to uninstall as root? Otherwise I think it won't work.

  With respect to your original problem, I got it, too, and that's what I did:

  sudo mv/usr/lib/vmware/modules/binary /usr/lib/vmware/modules/binary.old

  vmware-modconfig--console--install-all--appname sudo = 'VMware Player' - icon = 'vmware-player '.

• Windows 10 scheduled for Thinkpad Tablet 8 products?

  Can someone close to Lenovo tell us, if Lenovo intends to extend drivers and support for Windows 10 our products of Thinkpad Tablet 8?

  Obviously. Microsoft is responsible to provide the Win 10 update, and they said they would free within the first year of existence of all devices on Windows 7, 8 and 8.1. That is why it would be appropriate that Lenovo would finally win 10 support for its existing products as well, in addition to their new product preloaded with Win 10 lines. We have several more months to go, so be patient...

• Availability of recovery for ThinkPad Tablet A310 or update.zip?

  Is there a way to completely recover a ThinkPad tablet as I can with my LePad A1?

  I'm unable to do a full factory reset... since, even after this the tablet takes 10 minutes to start and start throwing errors Launcher when it is started.

  ThinkPadTablet_A310

  Yet Android 3.1, because no update is already not come across

  The problem has been resolved, but not with the help of Lenovo. Update to 4.0.3 ICS should be a simple update, but it seems not all the TPT is equalized and Lenovo does not provide complete recovery images (only incremental patches). I could reflash my device using nvflash and ClockworkMod. Restore a nandroid image provided by the people of nice at xda-developers. It seems that the script of update in Lenovo update ruined my EBT boot to partition of the device 4. It was restored by myself finally. I am very disappointed that Lenovo does not provide a complete recovery image. Hopefully Lenovo will consider the lessons learned from the TPT for future products, but after dealing with several Lenovo tablets already with similar maintenance problems, I'm sure I've learned my lesson.

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• Recommended solution for Thinkpad Tablet and VGA projectors?

  I ordered a Thinkpad Tablet hoping to use it for a teaching tool, but I face a common problem: most classrooms (and indeed, most conference rooms for business) are projectors VGA.

  I know there are a variety of converters HDMI / VGA (using Active electronic components, of course), but I was wondering if Lenovo recommends a solution or if anyone has first-hand experience (perhaps with the Ideapad tablet, or perhaps with a review of the Thinkpad Tablet model) connect to a VGA projector.

  An extra (a little more specific question), it's the mini-HDMI output provides power to work something like the HP-HDMI-VGA connector. If not, are there drivers to support a USB output device / VGA (which are available for Windows, but uncommon on Android).

  Thanks in advance for comments or suggestions!

  The HP adapter works without external power supply with a warning: the output resolution is the native resolution of the Tablet, which seems to cause distortions on 4:3 monitors and slight overscan issues at least a part is watching 16:9. For my purposes (conferences mathy things), it seems it will work fine, although I will take a piece of chalk tomorrow just in case.

• Web site created by Muse. The greats until tweek of today. Web site insists now for open index.html in the tablet. Don't know how product, nor how to change the default value for pc of office/index.html. Would advise. Bob

  Web site created by Muse. The greats until tweek of today. Web site insists now for open index.html in the tablet. Don't know how product, nor how to change the default value for pc of office/index.html. Would advise. Bob

  Hi Bob

  I think that you have found the solution but if still you are facing the question, please give me the url of the site that opens another provision in the tablet.

  Please make sure desktop redirection is checked in the site properties page layout.

  Thank you

  Sanjit

• How to download the module for the opening of the raw files of D80o. I have CS6

  How to download a module for the opening of the raw files of Nikon D800? I just bought a CS6 not containing not of this possibility

  Hello! you simply go to the Help menu, and then click "update", as in the following screenshot:

  

  It will update Photoshop 13.0.1 (or 13.0.1.1 on a PC) and Camera Raw to 7.2, which can open the D800 files and much more.

  In fact, you could have an Adobe logo on the Mac Os menu bar, or in system window tray alerting you that updates is available...

• Compilation of modules for an installed, but not running in the kernel?

  With

  LANG = C vmware-modconfig - console - install-all

  I can compile the kernel running modules. But how can I compile the kernel modules does not?

  Think about it.  You can't unlees you start with the kernel that is not running.

• ThinkPad Tablet 2 set button pen

  Hey all, I have ThinkPad Tablet 2 with the Wacom digitizer and an active stylus. The stylus a button on the side which the manual says is for screenshot. I would like to configure this button to be identical to a right mouse click on the button (I'm not a fan of the tap water then hold list drop-down functionality of the right mouse button trigger). To make this I:

  -Search 'calibrate' in Win10

  -went to "calibrate the screen for pen or press ENTER.

  -On the dialog box opened, I clicked on the tab 'other '.

  -J' clicked on the link "Go to Pen and Touch" under "configure your pen and tap Settings in pen and touch.

  -An open windows error dialog box that says:

  "Tablet and pen settings is not available. For assistance, contact the manufacturer of your tablet PC. (error = 0). »

  So here I am and here are my questions: why these settings are not available? Is there another way to configure the associated stylus button action? Thank you!

  Problem solved. I uninstalled Windows 10 and reinstalled and the pen settings are now available and more screen auto-rotation, now working as well. I find this strange because I makes no other changes to the Tablet and I was running any other software before, during and after my first upgrade of Windows 10. I guess an update has been published or there was a quirk in my initial upgrade of Win10. In any case, all's well that ends well

• Flash on Firefox 10.0 Thinkpad Tablet

  Yesterday afternoon, my Thinkpad Tablet has arrived.

  After installing a few applications, I decided to try Firefox. It works very well for navigation, and I much prefer the user interface to the default browser.

  The only problem is that I can't get the plugin flash to it, google, research, it seems like it should work fine, but when I go to install Flash for Firefox, a tab will open called 'Manager Mobile Settings'. The tab is completely empty, and I can't seem to get one more away than that.

  Does anyone know what I am doing wrong? I just have to stick to the default browser?

  I don't think any Firefox for android has flash support. They have not yet released in favor of their beta version. Opera supports flash and it's a great browser.

• Failure to update the kernel Module

  I've upgraded to Ubuntu 12.04 and now I can't use VMWare Workstation anymore.  I have the version 8.0.3, but when I run I am prompted with "Before you can run VMWare, several modules must be compiled and loaded in the kernel currently running." and the possibility of 'Cancel' or 'install '.

  

  Then, I click on install and invites me my password to sudo.  When performing updates, the compilation of the "Virtual Network Device' seems to fail.

  

  Then I get an error "Unable to start services" which tells me to check a log file for more details.

  

  I enclose the log file.  Also, if that makes a difference, I had this problem on the version 8.0.2, but when I saw 8.0.3 was out I have downloaded and updated but still had the same problem.

  the patch worked for me:

  http://Weltall.HelioHost.org/wordpress/wp-content/uploads/2012/01/vmware802fixlinux320.tar.gz

  I have vm workstation 8.0.3 and Ubuntu 12.04 precise, kernel 3.2.0.24 and hit the same problem as op.

  my not

  1. unzip the tar.gz, open and modila the version check file patch: patch - modules_3.2.0.sh

  vmreqver = 8.0.3

  plreqver = 4.0.3

  2. go in/usr/lib/vmware/modules/source

  3 extract the vmnet.tar

  tar xvf vmnet.tar

  4. apply the patch

  patch - p1<>

  5 nescot source

  tar cvf vmnet.tar vmnet-only.

  6 restart the vmware kernel module update...

  Good luck..

• Smart TPM D30 Linux kernel module?

  Seems that Linux does not recognize the TPM chip. There no module for it in the Linux kernel? I thought D30 supports RHEL6?

  Manufacturer: LENOVO
  Product name: 422916G
  Version: ThinkStation D30
  BIOS version: 0.37

  Sorry for the noise. The problem is resolved. You need to install the kernel-modules-extras package for the tpm_tis kernel module

• ThinkPad tablet 2 "means onenote gal?

  Hey guys! I was thinking of buying a thinkpad Tablet 2 for use in classes, but I'm not too sure about the performance of the TPT2. I want to use only OneNote and let my office of all the heavy lifting. How he handles the onenote on it? I want to print about 60 lectures of pdf of slide in onenote and annotate using ink. The tablet will be able to do this and does not lag when scrolling up and down and with much ink?

  Should I wait to best processors out? I don't want to blow like a grand you cos I am a student and like I said, I want only only for onenote.

  Thank you very much

  Daniel

  Yes, he hangs out a lot.

  Basically, the processor is too slow.

  From my experience.