DEV_ODI_REPO - security password, sign in to access the developer repository

Similar Questions

• I used a password reset disk to access the Password Wizard, whenever I have propose a new password, it gives the error message

  I used a password reset disk to access the Password Wizard, whenever I have propose a new password, it gives the error message "" an error occurred while the wizard attempted to set the password for this user account". I can't pass this screen and am virtually blocked the computer phone iam trying to access. What can I do? It comes to Windowns 7 Home Premium

  This probably means that your password disk drive is not up-to-date. Here are the other options built into Windows to help you get out of this situation:

  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Use the password indicator (only works if an indicator was created and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• Options > Security > passwords saved and printed on the site, the user name and passwords saved on my computer, thank you.

  Options > Security > saved passwords, can I print on the site, the user name and passwords saved on my computer, or how to locate the file where this information is kept. I change computers and want to transfer the information to the new laptop. Thank you.

  See

  • Print a list of passwords, must be run from a local drive by the directions), the - edmeister.com

• Cannot install the bar after having signed it: cannot access the Member "META-INF/AUTHOR. EC

  
  

  No, it's not correct,

  There are two stages of signature required here.

  1 sign your application created a 'release' in the standard way. This product bar of a file that is signed by BlackBerry 10 requirements of the standard. It has nothing to do with the ACF or NFC requirements. To do this, use the Momentics IDE.

  2 take the helm of the record produced in step (1) and sign in again using your own certificate, but this sign of time from the command line by using the tool of blackberry - sign as indicated on the page you have linked to your post:

  https://developer.BlackBerry.com/native/documentation/core/com.QNX.doc.NFC/topic/manual/t_nfcdevguid...

  If you follow this procedure correctly, META-INF must contain files called GPACACF. RSA and GPACRSA. SF.

  Please try it and let me know how it goes.

  Concerning

  Martin

• Without a password how can I access the computer and make my own?

  I inherited a Mac Mini (2012, but do not have the password to the owner (departed).) How can I access and make my own?

  Follow the steps here:

  What to do before you sell or give away your Mac - Apple Support

  To restore to a factory State, set up like yours.

• Unable to access the java repository

  I'm not able to install the plugin eclipse from here:

  http://www.BlackBerry.com/developers/jar/win/Java

  Try:

  http://www.BlackBerry.com/developers/jar/win/Java

  There is another for Macs.  I found this somewhere, I'll just see if I can find where.

  Where did you get the original URL?

  Edit,

  Find right URL where is expected to find it!

  https://developer.BlackBerry.com/Java/download/Eclipse

  Kamal_nigam said so allows you to point the browser here, not use it as an update site.  I must admit that confused me too!

  Edit: Just realized this is the same URL you posted.  All I can say is that it seems to work for me

• lost password for Windows vista to access the desktop computer

  A FRIEND RECEIVED A CONPUTER BUT DON'T HAVE A PASSWORD TO JOIN DESK TOP HAS TRIED TO KILL PASTWORD PROTECTION BY REMOVEING 3V BATTERY AND HELD POWER BEGINNING WITH ALL DISCONNECT

  Hello

  Responses cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  What to do if you forget your Windows password (Vista and Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• ' Error #2070: security sandbox violation: calling can not access the stage belonged to.'

  I tried the application deployment and I get this error.
  
  faultCode:Client.CouldNotDecode faultString:' error #2070: security sandbox violation: appellant cannot access the stadium belonged to.' faultDetail: 'null '.
  
  Exasperated after putzing autour with FlashPlayer Trust, cross-domain policy files, changing settings of the wrapper, changing the settings of the compiler and installing the debug version of Flash Player without success, I then installed Flex Builder on my friend and transferred machine source code to see if the problem goes away if I do a clean rebuild and compile it.
  
  And guess what! I still get the same error!
  
  Any tips will be appreciated.
  
  Happy new year!
  flexjv

  Duh!
  People of my fault.
  Discovered that a program that feeds on my Flex application generated invalid XML.
  The trap of fault Manager I had in my Flex application (which was based on an example of code Flex btw) generated the misleading warning.

  Moral of the story - instead of just showing the event.fault.message in your error handler, remember to precede a specific error message.

  Flex is a wonderful tool! Debugging in an env declarative, asynchronous as Flex requires a new debugging strategies well and unlearn some programming habits, though.

• Security log of mail window on the problem

  Recently, I got a windows security box when trying to access the all new incoming mail-it ask for a username and password, which I never needed to use before and I don't remember if I created these when I got to my laptop. It's on a Vista operating system. If I go back to the factory settings would it effect my computer all around or just my e-mail account. I'm afraid to lose all the stuff I have.

  Go to the factory settings, your hard disk wipes clean of everything.

  Contact your ISP (Internet service provider) for more information e-mail account.

  See you soon.

  Mick Murphy - Microsoft partner

• To access the Tables using DB link.

  Hello friends,
  
  I have an env development and production.
  
  I created a public link to DB developing say mylink.
  
  Trying to access the development of production table using the following command say to access x table
  
  Table DEV to access the PROD x using dblink
  
  Select * from x@mylink;
  
  Got the error like:
  ORA-02019: description of the connection to the remote database not found
  02019 00000 - "description of the connection to the remote database not found"
  
  Any idea on why this error is coming...
  
  Thank you/kumar

  I have an env development and production.

  I created a public link to DB developing say mylink.

  Trying to access the development of production table using the following command say to access x table

  Table DEV to access the PROD x using dblink

  Select * from x@mylink;

  You try to run the query in the database of PROD. This query uses a DB link that points to the DEV database.
  Very simple to understand: as you use the LINK DB in the PROD database, obviously it should be in the area of PROD... right?
  Imagine you use a PROD ("DBLINK") object and it does not exist here. I have it?

  SELECT * FROM x@mylink;

  Here,
  x database DEV table
  myLink - DB LINK in the database of PROD (pointing to DEV)

  Please try this.
  HTH

  Published by: Vanessa B on December 25, 2012 12:24 AM

• How to get to the developer issue tracker

  Hello

  This is a very stupid question: How can I access the developer of follow-up question?

  I read that the login is identical to the area of the developer, so I opened an account and activated. But when I go to connect, always gives me an error.

  Initially, I didn't know what was the username, but I read somewhere that is the e-mail address associated with the account. I tried all the combinations of username and psw without success.

  Do I have to install something like Jira that on my computer?

  Thank you.

  Hello

  I use the same login ID to access the BB developer Manager of incidents, but also the BB developer forums. User name is your e-mail address. Works for me, just tried now.

  concerning

• Cannot access the Thunderbird emails, sign in said browser no cookies when you enter the password

  I installed Thunderbird and installed an e-mail account with success, but when I add another account, it takes me to the Google sign in page enter my password, but when I enter the correct password, I get a window saying that my browser has disabled cookies
  I tried with the in and out parameters, and it doesn't seem to work!
  I have no problem to access e-mail from a web page by logging, only through Thunderbird

  My first email account added works fine, so I managed to do it once so I'm confused

  Any ideas?

  Thunderbird is the browser in question here. It is one of those things Gmail force on everyone being the 10000 pound gorilla in the room.

  Menu (alt + T) tools > options > privacy > and turn on the acceptance of cookies.

• I need to access the e-mail account of my dead son, the account is locked and I don't know the password, nor answers to security questions... Help!

  My son's e-mail address is * address email is removed from the privacy * I tried to reset the password, but the account is locked... apparently, someone else tried to access his account.  My address is * address email is removed from the privacy *.  I have a death certificate, his date of birth and place of birth, but cannot go further.  I need to access his account to clear and close.  In addition, need access to his FaceBook page that requires the use of its email account...  He died last December, and people still hold on him through these 2 avenues... just want to get them closed.  I spoke with Windows Live and also Microsoft support and they just pass me to other phone numbers that don't work or back to Windows Live internet support... go into vicious circles now and don't get no where...

  Please help me!

  Rodney Voris

  While your application may very well be authentic, it could also be interpreted as a surreptitious attempt to bypass security.

  It is in the terms of use and the Code of conduct of the responses of these forums to request or provide assistance to the cracking a password. Do not forget that you agreed to these and review if necessary.

  You can view the policy of Microsoft about lost or forgotten passwords (KB189126) for more information on what resources are available to you.

  The only advice I can offer you is to use the computer of your son end access to e-mail and social networking areas. The passwords can be recalled on the computer account.

  With all that said, you have my deepest condolences for your loss.

• Username and password required to access the security settings

  I have a HP5520e printer all in one. I'm putting it to scan to my computer. The instructions say I should activate Webscan from the administrator under settings and Security Options. When I try to access the settings of the administrator I wonder a user name and password. Should what username and password I enter here?

  gnomad899,

  Welcome to the HP Forum.

  Start with the standard:

  admin = admin

  password = password (or leave the field blank)

  This assumes, of course, you have not used EWS (built-in web server) and a password for her before - what you CAN do using the integrated Web server.  Once you do not set a password using the EWS page, whenever you want to watch some settings, set some parameters, you must enter the password that you set up.

  EWS is simply the webpage to the printer interface - as if you use a web page to talk to your router software.  Same thing: sort of, except that you type in the IP of the printer on your browser instead of router, of course.

  ============================================================================

  If it won't let you

  You can try to reset the printer.   Be aware that if you do this, you need to re enter all previously entered information (wireless settings, etc.).

  You may be able to reset the printer on the front panel - settings > settings default (or similar).

  OR

  Troubleshooting > troubleshooting > printer keeps no connection Wi-Fi

  Fourth step: reset the printer and wireless router and then restart the computer

  Follow these steps to reset your printer and your wireless router, and then restart your computer.

  

• I receive the "could not sign in you [access denied: 530]." Check your user name and password ' problem on Adobe Muse CC 2014 and I can not access the xml file that is supposed to solve this problem?

  I am a PC user and I have Adobe Creative Cloud Muse 2014. I received the "could not sign in you [access denied: 530]." Check your username and password "error. trying to download my muse to my ftp, GoDaddy host site I did it successfully in the past and that recently it has stopped working. I looked online at the Adobe Muse Help FAQ | Download a Site from Muse Adobe on a third-party hosting service and he said to download the ftpprefs.xml file but this file simply leads to a blank page that says / * not found * / / * not found * /.

  Can you direct me to a page to work with this file, or provide an alternative? Thank you!

  Hello

  As you have found the error [access denied: 530] This means that the problem is with access. The user name and password that you enter is incorrect or you don't have the appropriate permissions.

  I suggest you to contact Godaddy to reset the password or reset the permissions.

  
  

  Concerning

  Vivek