Diagnose the AGENTS Dump Info

Similar Questions

• Agent deployment of MS 12.1.0.2 to pre - req Linux by the agent checks

  Deploying the agent software from EM to a Linux host running Oracle Enterprise Linux version 5.8 I am one of the sine qua non default check which indicates that the root / does not belong to the root. Since the Setup log
  
  INFO: --------------------------------------------------------------------------------
  INFO: Checking AgentBaseDirCheck
  It is a prerequisite to check if the agent home directory belongs to the user to install, all parent directories belong either installation user or root user and the root directory (i.e. "/") is the property of the root user.
  INFO: The value of AGENT_BASE_DIR is: / opt/EM_Agent.
  INFO: The value of ORACLE_HOME is:/opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0
  INFO: The command get executed under this prereq is:/opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0/perl/bin/perl /opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0/sysman/install/CheckDirPermission.pl/opt/EM_Agent
  NEWS: Check the appropriate property on the base directory of the agent.
  INFO: Check if the base directory of the agent is owned by the oracle user agent and that its parent directory is owned by the agent user or root.
  INFO:...
  INFO: User name is: oracle & file owner is: oracle
  INFO:...
  INFO: ERROR: the root directory is not owned by the root user.
  INFO: The full version. The result of this review is: failure of < < < <
  
  INFO: --------------------------------------------------------------------------------
  
  Don't know how the / can not be owned by the root.
  
  Size of filesystem used Avail use % mounted on
  / dev/map/VolGroup00-LogVol00
  220G 63 146 G 30%.
  / dev/sda1 99M 23 M 72 M 24% / Boot
  tmpfs 2.0 G 620 M 1.4 G 32% / dev/shm
  
  
  [Mapper root@tomintoul] # ls - al
  Total 0
  drwxr-xr-x 2 root root 100 4 Dec 11:42.
  drwxr-xr-x 13 root root 7180 Dec 10 06:59...
  CRW - 1 root root 10, 62 4 Dec 11:42 control
  BRW - rw - 1 root disk 253, Dec 4 0 11:42 VolGroup00-LogVol00
  BRW - rw - 1 root disk 253, 1 Dec 4 11:42 LogVol01 VolGroup00
  
  
  Any help would be appreciated.

  Hello

  Please follow the provided below document that explains the problem.

  EM 12: Agent Installation fails with the error "the root directory is not owned by root user" (Doc ID 1380296.1)

  Kind regards
  Vincent

• Agent of the EM - bouncing the agent due to zombies

  OEM version: 11.2.0.2.0
  OS: Linux x86_64
  
  EM Agent descended suddenly, here is the error message in gcagent.log.
  
  "WARN - bouncing the agent because of zombies [zombieCnt = 3]"
  
  #1. The same zombies and the zombies to normal Linux/Unix
  #2. If so, the scope is limited to zombie processes created by jobs/metrics scripts invoked by the agent of the MA?
  #3. The agent itself restarts after a certain threshold (3 in this case)
  
  
  2013-01-02 14:44:25, 206 [32:BE1FF582:HTTP earphone-32 - / emd/life/hand cycle / (~ free from tasks ~ emdctl = > [135716666450001])] INFO - > > > Send request: StatusAgentRequest (AGENT timeout:300) < < <
  2013-01-02 14:44:25, 212 [32:BE1FF582] INFO - > > > reply: StatusAgentResponse (running) (id of the request 1) < < <
  2013-01-02 14:44:33, 423 [685:172A0F95:HTTP earphone-685 - / emd/life/hand cycle / (~ free from tasks ~ emdctl = > [135716667270001])] INFO - > > > Send request: StatusAgentRequest (AGENT timeout:300) < < <
  2013-01-02 14:44:33, 423 [685:172A0F95] INFO - > > > reply: StatusAgentResponse (running) (id of the request 1) < < <
  2013-01-02 14:44:34, 974 [782218:C8D50241:GC. SysExecutor.356 (ZombieDetector)] WARN - bouncing the agent because of zombies [zombieCnt = 3]
  2013-01-02 14:44:37, 678 [782218:C8D50241] INFO - Agent out with exit code 1
  2013-01-02 14:44:37, 680 [29:F9C26A76:Shutdown] INFO - Pier: execution of closing bracket
  2013-01-02 14:44:37, 681 [29:F9C26A76] INFO - Pier: [email protected]:3872 soft stop
  2013-01-02 14:44:37, 682 [29:F9C26A76] INFO - Pier: ContextHandler@2c93c4f1@2c93c4f1/emd/lifecycle/main,null soft stop
  2013-01-02 14:44:37, 682 [29:F9C26A76] INFO - Pier: HTTPLifecycleHandler@1966c114 soft stop
  2013-01-02 14:44:37, 682 [29:F9C26A76] INFO - Pier: ContextHandler@290e1513@290e1513/emd/main,null soft stop
  2013-01-02 14:44:37, 682 [29:F9C26A76] INFO - Pier: HTTPRequestHandler@5b89a773 soft stop
  2013-01-02 14:44:37, 682 [29:F9C26A76] INFO - Pier: ServletContextHandler@43582a7c@43582a7c/emd/browser,null soft stop
  2013-01-02 14:44:37, 682 [29:F9C26A76] INFO - Pier: ContextHandler@2a509df8@2a509df8/,null soft stop
  2013-01-02 14:44:39, 484 [787769:1FDB55A5:oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl - Incident Dump executor (created: Wed Jan 02 14:44:37 PST 2013)] WARN - result set above the level of min flood control
  2013-01-02 14:44:40, 743 [29:F9C26A76] INFO - Jetty: complete closing bracket

  Please check the Doc - ID '12 c Agent crashing because of Zombie process. [1468586.1 ID] "MOS...

  Rgds
  Jan

• Computer does not start after falling, goes to the memory dump to the place

  Computer was hit, begins a boot process but that heads directly to the memory dump.

  Info that I hope is relevant:

  Page_Fault_In_Nonpaged_Area

  Stop: 0 x 00000050 (0XCB900000, 0 x 00000000, 0 x 00000000, 0X8053A923)

  Hello

  · What is the number and the model of the computer?

  Follow the steps from the link and check if it helps: you may receive an error message on a Windows-based computer: "STOP 0 x 00000050" or "STOP 0x0000008e": http://support.microsoft.com/kb/903251

• Impossible to activate the Agent FTR

  Dear all,

  I tried to activate the FTR agent but, impossible to activate it. When I checked the logs, I could see the following errors.

  "14/09/30 10:28:03.564 ECHO FATAL [Thread-40] com.quest.ftr.agent.ComMonitorThread - ComMonitorThread taken NoClassDefFoundError. Check the installation and the path of JAR files. Could not initialize class com.jacob.com.ComThread

  java.lang.NoClassDefFoundError: has not been initialized class com.jacob.com.ComThread
  at com.quest.ftr.agent.ComMonitorThread.run(ComMonitorThread.java:246)

  2014-09-30 10:28:03.564 ECHO INFO [Thread-40] com.quest.glue.core.services.AgentStatusServiceImpl - failure reported Agent
  2014 09-30 10:28:03.564 ECHO VERBOSE [Thread-40] com.quest.ftr.agent.ComMonitorThread - bridge COM out restart = false
  2014-09-30 10:28:03.564 ECHO com.quest.ftr.agent.ComMonitorThread WARN [Thread-40] - Caught throwable son freeing com could not initialize class com.jacob.com.ComThread
  2014-09-30 10:28:03.564 ECHO INFO [Thread-40] com.quest.ftr.agent.ComMonitorThread - COM monitor thread exit
  2014-09-30 10:28:03.564 ECHO VERBOSE [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - data collection to stop
  2014-09-30 10:28:03.564 ECHO INFO [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - data collection stopped
  2014-09-30 10:28:03.564 ECHO INFO [FTR AgentStatusService] com.quest.ftr.agent.FTRAgent - Agent stops collection
  2014-09-30 10:28:03.579 ECHO VERBOSE [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance - agent of destruction
  2014-09-30 10:28:03.579 ECHO INFO [FTR AgentStatusService] com.quest.glue.core.agent.AgentInstance agent - destroyed"

  Could someone check and help me on this.

  Thanks in advance. :)

  Hi Renon,

  The first thing to check is that you have a 32-bit Foglight Manager Agent to run the agent FTR (even if it is on OS 64 - bit). This is a common reason for the agent to fail to start.

  From the release notes: The Foglight Transaction recorder and player are supported on 32-bit and 64-bit systems. Transaction Foglight player works on 64 bit systems only if the 32-bit version of Foglight Manager Agent is installed.

  Kind regards

  Darren

• Event 45, volmgr. Windows 7 x 64 SP1. "The system could not sucessfully load the crash dump driver."

  The crash dump driver fails to load at startup.  When the system crash it does not blue screen and reboots the system.  I want to get it going so I can read the crashdump...

  There is a fix out there for pre Windows Vista SP1 that appears very relavent but will not be installed (by his design of the correction).

  Details below...

  Log name: System
  Source: volmgr
  Date: 18/05/2011 08:54:37
  Event ID: 45
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Cryogen
  Description:
  The system could not sucessfully load the crash dump driver.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      45
      2
      0
      0 x 80000000000000
     
      39071
      System
      Cryogen
     
   
   
      \Device\HarddiskVolume3
      0000000001000000000000002D0004C003200000BB0000C000000000000000000000000000000000
   
  

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7601 Service Pack 1 Build 7601
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the CRYOGEN system
  System manufacturer system manufacturer
  System product name model system
  System Type x 64-based PC
  Processor Intel (r) Core i7 970 at 3.20 GHz, 3201 Mhz, 6 Lossnay, 12 or logical processors
  BIOS Version/Date American Megatrends Inc. 1301, 16/11/2010
  SMBIOS 2.5 version
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "6.1.7601.17514".
  Cryogen\Charles user name
  Eastern Daylight Time zone
  Physical memory (RAM) installed 24.0 GB
  24.0 GB total physical memory
  18.1 GB available physical memory
  48.0 GB total virtual memory
  41.8 GB available virtual memory
  Page file space 24.0 GB
  File E:\pagefile.sys

  Drop the question above actually lead to what may be a solution... The fix for Windows Vista pre SP1 fixes an issue with the (cloned) dynamic disks used to store the paging file.  I have two drives on the clone (E:\) which the system information noticed the location of the swap file.  I put the pagefile drive to C:\ in the event where it was the same problem, such as reported in the hotfix, but it has not fixed the problem...  So I assumed that this fix has been exceeded and a coincidence. But the information system showed the swapfile E:\, my dynamic disks...

  What has removed the error is "double adjustment" the return to C:\ drive.  Apparently once is not enough.  I put the pagefile on C:\ managed and rebooted system.  Then I noticed the mistake of volmgr came from miroir3 (second player in E:\) still info system showed the swapfile on C:\.   Weird indeed.  I went and be given the C:\ drive as the system swap drive to managed by activation/deactivation/Executive every car out of the current value, and then back to the desired direction.  After having done that and restart once more the error no longer appears in the event viewer at startup.

  The only thing worse than a BSOD, no BSOD.

• view the memory dump files

  How to display the memory dump files?

  Tracy

  They need special tools and experience.  Would be better if we did it for you

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

• Urgent: Error Communication with the agent of the EAC

  Hi all
  
  I am facing the slot problem when I ran the update from the base. Can someone help me what is causing this problem? and what to do to fix this?
  
  [10.16.12 12:18:08] NEWS: Audit AppConfig.xml definition against the provisioning of existing CEC.
  [10.16.12 12:18:10] INFO: Definition has not changed.
  [10.16.12 12:18:10] INFO: Starting database update Script.
  [10.16.12 12:18:11] INFO: Lock acquired "update_lock."
  [10.16.12 12:18:11] INFO: Download from Web Studio config files.
  [10.16.12 12:18:11] INFO: The utility [ITLHost] start shell "cleanDir_config".
  [10.16.12 12:18:11] SEVERE: Error communicating with the agent of the EAC while starting the utility 'cleanDir_config '.
  Occurred during execution of the valid BeanShell script 10 line:
  [[
  
  7. If (Forge.isDataReady ()) {}
  8. If (ConfigManager.isWebStudioEnabled ()) {}
  9. Get Web Studio config, merge with Studio of Dev config
  10. ConfigManager.downloadWsConfig ();
  11. ConfigManager.fetchMergedConfig ();
  12. } else {}
  13. ConfigManager.fetchDsConfig ();
  
  ]]
  
  [10.16.12 12:18:11] BASS: Caught an exception during method call "run" on the object 'BaselineUpdate '. Release locks.
  
  Caused by java.lang.reflect.InvocationTargetException
  sun.reflect.NativeMethodAccessorImpl invoke0 - null
  Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
  com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - valid BeanShell script runtime error.
  Caused by com.endeca.soleng.eac.toolkit.exception.EacCommunicationException
  com.endeca.soleng.eac.toolkit.utility.Utility start - communication error with the agent of the EAC starting the utility 'cleanDir_config '.
  Caused by com.endeca.eac.client.EACFault
  sun.reflect.NativeConstructorAccessorImpl newInstance0 - null
  
  [10.16.12 12:18:11] INFO: Lock released "update_lock".

  No idea how to fix this properly. If the server does not get used for something else that your own development, then you can simply delete the configuration of short: stop the EAC (short HTTP Service), rename the directory %ENDECA_CONF%\state to the backup State, create an empty directory, then restart the service. You need to run initialize_services to re - initialize your request. If it's a server 'appropriate', i.e. has other applications running on that you may not want to not re - initialize, support ring - they will have hopefully a better suggestion.

  Michael

• What would cause the "from address" info (FA). some emails, downloading the pop3 server, will be replaced by an 'f' 'common '?

  I get multiple research work emails (E/JS) and ecommerce. Some of them have a "Correct".
  'St. Michael Job Assistance Ministry - JAM' FA (SMJAM-JAM).

  For some reason, however, some of the emails from other sources, downloading the verizon pop3, E/JS server are indicated (wrongly) as having the FA SMJAM-JAM above. This situation prevents my email filters to plug these emails to their appropriate mail folder.

  Also, when the steps in order to transmit emails showing incorrect information of FA SMJAM-JAM, the e-mail is no longer present incorrect information of FA SMJAM-JAM but shows rather the correct information of FA that had been specified on the verizon pop3 server.

  address ROM"(FA) in some emails, when downloading from the pop3 server, is replaced by a 'common' 'FA '. [email protected]

  What would cause the "from address" info (FA). some emails, downloading the pop3 server, will be replaced by an 'f' 'common '?

  Hello

  If I understand your problem, I think it may have to do with the addresses stored in your address book. Thunderbird can display the name of your address book instead of the name of the post office, where corresponds to the e-mail address.

  Check your address books to see if you have a bad entry for mail addresses get listed wrong.

  Also check under Tools-> Options-> advanced-> reading & display if you have checked the option to see show it only the names of the people in my address book. If you uncheck this option, the name and the address must be...

• How can I disable the Agent updates from HP running?

  HP pavilion D4100Y

  Windows XP SP2 or 3 (not sure)

  No error message

  No recent changes

  Problem: The program "HP updates Agent" run frequently and on no particular schedule, certainly not the one I chose.  He takes over my computer for hours and using most of the CPU, fluctuating between 13% and 87% to 1 etc.3% at 6%, etc.. The computer crashes and I can not use it for something else. On the HP updates screen, I put updates on 'NEVER', but that did not work.  The programs always run. In the Windows Task Manager window, the program is called "Agent updates from HP".

  I find nothing on this problem in the base of support.

  How can I disable the Agent updates from HP running?

  Select your Start button, in the search box type 'msconfig' then msconfig.exe under programs.

  Look under the tabs "Services" and "Boot". Uncheck update HP agent, select 'Apply' and close.

• We get the blue dump with error 0x000000fa error (0xfffffadf3ff7de0, 0xfffff0df26698ea0, 0 x 0000000000000001, 0x0000000000000c10)

  Hello

  We get the blue dump with error 0x000000fa error (0xfffffadf3ff7de0, 0xfffff0df26698ea0, 0 x 0000000000000001, 0x0000000000000c10) on windows server 2003 please suggest solutions for this problem

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• For updating my netflix in my mac pro book, that I can't get rid of the old silverlight info by any means netflix suggests

  For updating my netflix in my mac pro book, that I can't get rid of the old silverlight info by any means netflix suggests

  I use Internet Explore or windows, but was forced to put something dow
  Hello
   
   
  Try the following:
   
  Removal of the plugins Silverlight on Macintosh
  http://www.Microsoft.com/getSilverlight/get-started/install/removing-Silverlight-Mac.aspx
  Uninstalling previous versions of Silverlight on Macintosh
  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-Mac.aspx
   
  If the links above does not help him, then validate the query in the Silverlight forum.
  Here is the link: http://forums.silverlight.net/

• Yahoo Mail sign of trouble, the message appears "diagnose the connection problem.

  When I click on Yahoo Mail sign in the message comes to "diagnose the connection problem. It opens on more of the page. It is only with Yahoo Mail.  All other centers opened their doors without refreshing the page.  This problem is with all browsers. Any solution please.

  Hello

  Because the problem is with yahoo mail I suggest you to ask your question in the forums of yahoo.
  http://answers.Yahoo.com/dir/index?link=list&SID=396546091

• Diagnose the connection problem

  When a game on pogo.com my computer pop up says (diagnose the connection problem) I checked all comcast connectins. This only happens on one of the computers in my house. How can I fix it?

  Hi BAclaus,
  Try this quick troubleshooting guide:
  http://www.Microsoft.com/Windows/using/tools/IGD/default.mspx
  Eddie B.

• After upgrading from windows and reboot "diagnose the connection problem" rises and won't let me use windows until the removal of updates

  diagnose the connection problem

  You can try to uninstall the update 974455 that came out last Tuesday, removing it seems to have resolved other