Dialog - OK - Cancel - apply - the bottom of the screen

Similar Questions

• File copy/delete dialog box is off the screen in a staggered multiple follow Setup

  I'm on Windows 8 on a ThinkPad W520 with a 1920 x 1080 screen and a secondary antibody NEC LCD2070NX 1600 x 1200 display connected via DisplayPort. The NEC is positioned to the left of the ThinkPad and raised higher than the ThinkPad display; the bottom of the NEC is near the center of the left edge of the ThinkPad.

  I put to the top of the poster in the Panel to take account of this arrangement:

  http://mg.to/bugs/Windows/display-settings.PNG

  If I have a window of the Explorer of files open in the secondary monitor on the left and use this window to copy or remove some large files or folders, the progress dialog box is not visible. It is currently displayed in the "man no of land" above the main monitor and the secondary screen.

  The problem occurs when the secondary monitor is on the right, or above or below the primary. (I have tested some of these cases, but not completely). Also, this does not happen when the Explorer window is on the primary monitor. The problem does occur at all on Windows 7.

  Here's a film that illustrates the problem. For each image, I copied a large directory on the network and took a screenshot to display side by side and move the secondary display up to about 120 pixels in the control panel every time. You can see how the copy dialog box follows the secondary monitor vertically, but her left side is pinned to the left edge of the main screen, so he ends up disappearing from the screen.

  http://mg.to/bugs/Windows/multiple-display-bug.wmv

  It is easy to see what is happening here: Explorer normally centers the dialog box of progression on the same screen as the Explorer window that opened the dialog box. This does not work as expected in the direction, but on the axis X to the left edge of the dialog box's get pinned to the left edge of the main screen.

  As the corner at the top left of the primary monitor is always (0,0), it acts as if the dialog box was positioned like this pseudo-code:

  monitor = getWindowMonitor (feed)

  dialog.centerOnMonitor (monitor)

  If dialog.left< 0:="">

  Dialog.Left = 0

  When the dialog box is off the screen, it's a bit disturbing, because it makes the impression that the Explorer window is locked. The only way I know to make visible the dialog box is with this exercise of the superpowers of keyboard shortcut:

  1. use Alt + space to open the system menu of the dialog box. The menu will open on the screen no matter where is the dialog box.

  2. Press m to move (or click on move).

  3. you will see a four-headed mouse cursor, just to fool you into thinking the mouse could do something now. It will not!

  4 instead of this, you have to hit any key of the arrow, which begins the displacement of the dialog box.

  5. now you can use the mouse (or the puree on the arrow keys) to move the dialog on the screen.

  A bit of good news...

  I just tested this on the latest version of Windows preview 10 technical, and it seems to be fixed.

• As I try to start my computor, any dialog box appears on the screen are covered in "'

  As I try to launch my putor, any dialog box appears on the screen are covered in "' so I can't put passwords or addresses of sites and if the sound is on a morse codes like noise appears with the comma... I have done all the analysis and attach it to Microsoft but do I have a virus and how do I find? thxs

  .. .all dialog box appears on screen is covered in "' so I can't put passwords or addresses of sites and if the sound is on a morse codes like noise appears with the comma...

  The character you are evidence is a single quotation mark or tick rather than a comma, but the character you see in reality is probably an asterisk in a mask the password text box. In both cases, the problem remains the same.

  You have a key stuck on your keyboard which instantly fills any box entry with the typed characters, they are ticks or asterisks. The only audible ringer is a normal computer error indicating that the keyboard buffer is full, but entry continues, once again an indication of a stuck keyboard key.

  Try another keyboard. It may be possible to launch a key by a sharp tap, but the problem will probably persist in the future. I hope that you don't talk about your laptop.

• My dialog windows appear off the screen... Please help

  A lot of my dialog windows styles for paragraph, or when I hang items appear off the screen (I see the bottom of the window, but not from the top which means that I can't move them) - suggestions?

  Laurie

  I tried the solution as Kipp Ky\'Eva posted, but I couldn't find an option to "Gather Windows" (after I plugged my second monitor, I saw that this dialog box was also off the screen).

  I found another solution that worked for me however:

  Go to System Preferences > monitors.

  Click on "scaling".

  Note the screen resolution you are using.

  Change the resolution of the screen to do anything and then change back to your original setting.

  For me, that reset the screen with all the windows in their places.

  Source: http://forums.macrumors.com/showthread.php?t=359732

• Dialog box style off the screen

  While using InDesign full screen (3440 x 1440), the object style dialog box is on the top of the screen and cannot be dragged on because the title bar is also off the screen.  The dialog box cannot be resized (who usually move it), so I'm not sure how to make visible.  Restoration of the app is not help either - the dialog box is still mostly off the screen.  In addition, the Windows key + ShiftKey + left arrow (or one of the arrows by the way) does not affect the location of the upper part of the dialog box, passes just a screen that displays the dialog by mistake on.

  

  The operating system is Windows 10 on a Surface Pro 3 with a monitor LG Ultrawide.

  Thank you

  Richard

  Steve,

  I contacted Adobe support, and the winning solution was to detach the Surface Pro 3 and raise InDesign with only the single monitor of 2440 x 1440.  The object Style Options of windows then jump-up in a usable place.  When I brought the Tablet, reopened InDesign and brought to the top of the window, it was still where I left it on the tablet screen and I could drag it to a site that is usable on the external monitor.  Solved the problem, but I think that it a workaround solution.  No app should place a dialog box or the same window partially off the screen in the current context of monitor/Bangkok.  Looks like a tweek for InDesign, go ahead... ;-)

  Thank you

  Richard

• Dialog boxes appear off the screen

  Hello, I have problems with dialog boxes in Illustrator CS6.

  Dialog boxes are appearing in various different locations rather than a central location on the screen...

  For example: the Save dialog box appears half off the screen towards the lower right section of the screen. Various other boxes appear at the top left, top right. All dialogs are mobile, so I can reposition in the Middle, but the next time I used appear where they were not at the Center.

  I work on both a 13 "macook pro separately and with and 27" apple screen attached. Dialog boxes are visiable on 27 "screen, but often in odd places.

  Is there a way I can reset their position?

  I tried reseting all the dialogues, trashed the preferences in the preferences in the folder of the library on the computer but no luck. I'm puzzled.

  Any help would be appreciated...

  Thank you

  nosbornf,

  It is important that Illy is closed when you reset the preferences.

  Try the following (you may have tried / some of them already) and see if it helps:

  (1) close Illy and open again.

  (2) restart the computer;

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift at startup.

  4) move the folder with Illy closed;

  (5) browse and try the relevant among other options;

  Even worse, you can (if all else fails and no best answer appears):

  (6) uninstall, run the cleanup tool and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Shadows dialog box remains on the screen

  Since the update to 2014 CC, I have shadows of dialog, the settings and the radio buttons on my screen.  It is only from products Adobe CC 2014. Older Illustrator and other windows programs do not. Anyone know how to get rid of these? I closed the program, I restarted the programs, I moved other Windows I closed everything about adobe in the Task Manager. So far they only go away on a restart.

  Here are two images.

  

  I have upgraded my Windows 8.1 computer and now I have not received this bug.

  First I was in contact with adobe support and they help me set for 2 hours then he returned (they deletet som files that was hidden).

  So the only thing that helped me was to upgrade the computer operating system.

• How do you apply the screens in Photoshop?

  Am new to CS5 and I discovered something of quite accidentally.  In Essentials under styles, I've learned from these small boxes with polka dots around them and you could drag on over your picture and a nice screen appears on your photo - just like the effect of cartoon if sketch you and stamp and sketches and half tone, but it was a screen already.  I went down the styles you are looking for how these points formed a screen where it would land on your entire photo.  I don't know how I could get this effect, but none of these boxes, I clicked on that would have this screen with dots of different sizes.  How are you doing with some skill?

  If you talk about dashed strokes styles then a model was used to achieve this effect.

  Watch the race in the layer styles dialog and you will see that the Type of fill is model.

  You can save the profile by clicking on the small button to the right of the thumbnail of the pattern

  to get a better look at the model.

  

• When the computer starts a dialog box appears on the screen, the title of box - Windows Product Activation - it's authentic? (details below)

  The message says:-since first, windows has been activated on this computer, the computer hardware has changed a lot. Because of these changes, Windows must be reactivated within 3 days. You want to reactivate Windows now?

  That sounds like a real message, or would it be a virus?

  There are months that additional memory has been added on the hard drive.

  It looks like a real message and that activation glitch sometimes. Go ahead and turn on the computer. MS - MVP - Elephant Boy computers - don't panic!

• which method is called when the screen has lost focus but stays on blackberry?

  Hello

  I want to know in which method is called when the screen has lost focus, but always visible BlackBerry?

  For example, a screen is in the foreground and we disply dialog box so that the screen is visible but not to focus, therefore, at this time that methos called when we close this dialog box?

  Please, help me please please

  Override the following methods in your class to screen according to your needs

  1. when the screen button to the stack

  Call

  onDisplay() or

  onUiEngineAttached(boolean attached) - so attached is true then your screen is at the top of the screen

  2. When you are in a backlight and the lcd screen turns off to your state of rest and turns on again when you actively use this form

  call

  onVisibilityChange(boolean visible) - if visible is set to true, then you get the focus when the lcd display turns

  3. when your application moves to the background by clicking the red end button (i.e. without quiting the app, yet yours is active in the background)

  call

  onExposed() - when your application comes to the foreground of the background or during any type of screen that is in the top get popped

  & call

  onObscured() - when your application moves to the background, or when a screen pushed above your current screen more

• The cancellation of the 'file' dialog box and handle errors caused by the empty path that makes the DB connection

  Hi guys.

  I developed a VI that connects to the database reads the names of tables, columns of the selected table, etc. It works well as I want to.

  However, I have problem with identifying the UDL file with function of dialog 'file' use in a structure of the event that is triggered when the button 'Open' value is changed. It also works well, when I choose the UDL file, but the problem is when I cancel it and I get the error 43.

  I tried to deal with this problem with a "error handler" function to clear the error 43 but the next errors that are associated with the database conncetion appeared. The reason is, when file dialog is cancelled, an empty path passes by reference of connection and I can't start the while loop where are the key codes. I also used a box Structure connected to "Cancelled" with 'DB connection tool' in case of real and connection the reference connection for the while loop, but I get the same result.

  I want to apply for work as: start to push the button "Open" and select the file UDL, the loop run to establish the connections database, if not with the cancellation of the file dialog box, the application waits by pushing the button open and select the UDL file again.

  Thanks a lot for your help in advance.

  Hi lman,.

  start to push the button "Open" and select the file UDL, the loop run to establish the connections database, if not with the cancellation of the file dialog box, the application waits by pushing the button open and select the UDL file again.

  Some pseudocode, easy to implement:

  WHILE
  
    onevent(OPEN button)
      FileDialog
  
    IF file selected THEN
      open database
      do calculations
    ELSE
      do nothing
    ENDIF
  
  WEND
  

  What is your problem with the help of loops and structures of the case?

• I tried to change my font size in the customization. I've done the dpi too big and now I can't change it because I can't have at the bottom of the screen to 'apply '. Can you help me change it back?

  In Customizing under my computer, I clicked on change police (CIO).  Then, I went in custom and changed to 200.  After the reboot, I found that he was too big and re-entered the customization to restore.  Unfortunately, I do not see the bottom of the box click on 'apply' because he is behind the black bar at the bottom of my screen... windows logo, internet, time, etc. all the way down my screen.  Can you help me to restore?

  In the box just press "enter".

• Cancel disable them button on the screen at the time of order credit check Hold applied

  Hello

  I want to cancel button on the screen at the time of order credit check Hold applied

  Thank you

  Please see the note below

  Book order cancel (https://mosemp.us.oracle.com/epmos/faces/ui/km/DocumentDisplay.jspx?id=412683.1Doc ID 412683.1) button-click button grayed out in process Message window after

  This applies to your case

• How to support the cancellation of the user list items dialog box

  I have created a dialog box and fill it with a list of entries.

  The user removed an entry in this list, chooses to cancel, but the deleted entry is not in the list.

  How do you support this type of cancellation?

  Thank you

  You can get a direct view. Use "HAVE order Notifier: cancel before ' or ' HAVE order Notifier: after cancellation. Substitute for "Undo" and "Redo" as needed.

• Script will not apply the paragraph style

  Hello

  I'm new to scripting in InDesign (CS3), and I'm trying to understand why the scipt below does not apply a style in the following text file? :

  < ASCII-WIN >

  < ParaStyle: Heading 1 > who are we? < ParaStyle >:

  For ease of reading, I have shortend the text file to just two lines.

  The script that I use to open and to format the text file is:

  Create a new document.

  myDocument var = app.documents.add ();

  Set the units of measure and the origin of the rule.

  myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points;

  myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points;

  myDocument.viewPreferences.rulerOrigin = RulerOrigin.pageOrigin;

  Get a reference to the first master spread.

  var myMasterSpread = myDocument.masterSpreads.item (0);

  Get a reference to preferences on the margins of the first page in the Master spread.

  var myMarginPreferences = myMasterSpread.pages.item (0) .marginPreferences;

  Now set up the page margins and columns.

  myMarginPreferences.left = 4;

  myMarginPreferences.top = 70;

  myMarginPreferences.right = 70;

  myMarginPreferences.bottom = 78;

  myMarginPreferences.columnCount = 2;

  myMarginPreferences.columnGutter = 14;

  The margins of page and columns for the right-hand page.

  var myMarginPreferences = myMasterSpread.pages.item (1) .marginPreferences;

  myMarginPreferences.left = 48;

  myMarginPreferences.top = 70;

  myMarginPreferences.right = 70;

  myMarginPreferences.bottom = 78;

  myMarginPreferences.columnCount = 3;

  myMarginPreferences.columnGutter = 14;

  Adding Master Page items

  var myMasterSpread = myDocument.masterSpreads.item (0);

  var myLeftPage = myMasterSpread.pages.item (0);

  var myRightPage = myMasterSpread.pages.item (1);

  var myLeftFooter = myLeftPage.textFrames.add ();

  myLeftFooter.geometricBounds = [70, 742, 728, 528];

  myLeftFooter.textFramePreferences.firstBaselineOffset = FirstBaseline.leadingOffset;

  myLeftFooter.contents = SpecialCharacters.autoPageNumber;

  myLeftFooter.parentStory.characters.item (0) .pointSize = 11;

  myLeftFooter.parentStory.characters.item (0) .leading = 14;

  var myRightFooter = myRightPage.textFrames.add ();

  myRightFooter.geometricBounds = [48, 742, 728, 542];

  myRightFooter.textFramePreferences.firstBaselineOffset = FirstBaseline.leadingOffset;

  myRightFooter.contents = SpecialCharacters.autoPageNumber;

  myRightFooter.parentStory.characters.item (0) .pointSize = 11;

  myRightFooter.parentStory.characters.item (0) .leading = 14;

  myRightFooter.parentStory.characters.item (0) .justification = Justification.rightAlign;

  Adding master text frames

  var myLeftPage = myMasterSpread.pages.item (0);

  var myRightPage = myMasterSpread.pages.item (1);

  var myLeftTextFrame = myLeftPage.textFrames.add ();

  myLeftTextFrame.geometricBounds = [70, 70, 714, 528];

  myLeftTextFrame.textFramePreferences.firstBaselineOffset = FirstBaseline.leadingOffset;

  myLeftTextFrame.textFramePreferences.textColumnCount = 3;

  myLeftTextFrame.textFramePreferences.textColumnGutter = 14;

  Add a label to make the image easier to find later.

  myLeftTextFrame.label = "BodyTextFrame";

  var myRightTextFrame = myRightPage.textFrames.add ();

  myRightTextFrame.geometricBounds = [70, 48, 714, 542];

  myRightTextFrame.textFramePreferences.firstBaselineOffset = FirstBaseline.leadingOffset;

  myRightTextFrame.textFramePreferences.textColumnCount = 3;

  myRightTextFrame.textFramePreferences.textColumnGutter = 14;

  Add a label to make the image easier to find later.

  myRightTextFrame.label = "BodyTextFrame";

  Link the two frames using the nextTextFrame property.

  myLeftTextFrame.nextTextFrame = myRightTextFrame;

  The substitution of Master Page points and adds text

  var myTextFrame = myDocument.masterSpreads.item (0).pages.item (1).textFrames.item (0) .override (myDocument.pag es.item (0));

  Add text by setting the contents of the insertion of a string.

  In JavaScript, "\r" is a return character.

  .silence myTextFrame.insertionPoints.item (0) = "dok\r";

  Adding and applying a paragraph Style

  var myParagraphStyle = myDocument.paragraphStyles.item ("title 1");

  try {}

  var myName = myParagraphStyle.name;

  }

  {} catch (MonErreur)

  //The style of paragraph don't have not exist, so create it.

  myParagraphStyle = myDocument.paragraphStyles.add ({name: 'Title 1'});

  }

  We need to create a color. Check if the color already exists.

  myColor var = myDocument.colors.item ("Green");

  try {}

  myName = myColor.name;

  }

  {} catch (MonErreur)

  //The color have not exist, so create it.

  myColor = myDocument.colors.add ({name: 'Green', model: ColorModel.process, colorValue:[100,0,100,0]});})

  }

  Now set the formatting of the paragraph style.

  myParagraphStyle.appliedFont = "Arial";

  myParagraphStyle.fontStyle = "Bold";

  myParagraphStyle.pointSize = 24;

  myParagraphStyle.spaceAfter = 24;

  myParagraphStyle.spaceBefore = 24;

  myParagraphStyle.fillColor = myDocument.colors.item ("Green");

  Apply the style to the paragraph.

  myDocument.pages.item (0).textFrames.item (0).paragraphs.item (0) .applyParagraphStyle (myParag raphStyle, true);

  You can also use:

  myDocument.pages.item (0).textFrames.item (0).paragraphs.item (0) .appliedParagraphStyle = //myParagraphStyle;

  Import a text file

  Display a standard dialog box open the file to select a text file.

  var monFichierTexte is File.openDialog ("choose a text file");.

  If you selected a text file, and if you didn't press Cancel,

  Place the file of text on the first insertion point after the title.

  If ((monFichierTexte! = "") & & (monFichierTexte!) (= null)) {}

  myTextFrame.insertionPoints.item(-1).place (myTextFile);

  }

  Place a graphic

  Display a standard dialog box open the file to select a graphic file.

  var myGraphicFile is File.openDialog ("choose a graphic file");.

  If you have selected a graphics file, and if you didn't press Cancel,

  Place the graphic file on the page.

  If ((myGraphicFile! = "") & & (myGraphicFile!) (= null)) {}

  var myGraphic = myDocument.pages.item (0) .place (myGraphicFile);

  //Since you can place multiple graphics at once, the place method

  //returns a table. For the graph you have placed, get the first

  //item in the table (beginning of JavaScript arrays with element 0).

  myGraphic = myGraphic [0];

  //Create a style object to apply to the graphic image.

  var myObjectStyle = myDocument.objectStyles.item("GraphicFrame");

  try {

  var myName = myObjectStyle.name;

  }

  catch (MonErreur) {}

  //The an object style have not exist, so create it.

  myObjectStyle = myDocument.objectStyles.add({name:"GraphicFrame"});)

  }

  myObjectStyle.enableStroke = true;

  myObjectStyle.strokeWeight = 3;

  myObjectStyle.strokeType = myDocument.strokeStyles.item("Solid");

  myObjectStyle.strokeColor = myDocument.colors.item("Green");

  //The frame containing the graphic is the parent of the graphic.

  myFrame var = myGraphic.parent;

  myFrame.applyObjectStyle (myObjectStyle, true);

  //Resize the frame to a specific size.

  myFrame.geometricBounds = [0,0,600,600];

  //Fit the graph in the image proportionally.

  myFrame.fit (FitOptions.proportionally);

  / / Next, mount the frame to the resized image.

  myFrame.fit (FitOptions.frameToContent);

  var myBounds = myFrame.geometricBounds;

  var myGraphicWidth = myBounds [3] - myBounds [1];

  //Move the graphic frame.

  var myPageWidth = myDocument.documentPreferences.pageWidth;

  var myTopMargin = myDocument.pages.item (0).marginPreferences.top;

  myFrame.move ([myPageWidth-myGraphicWidth, myTopMargin]);

  //Apply a wrap to the graphic frame.

  myFrame.textWrapPreferences.textWrapType = TextWrapTypes.boundingBoxTextWrap;

  myFrame.textWrapPreferences.textWrapOffset = [12, 24, 12, 24].

  }

  I hope someone can point me in the right direction.
  Thanks in advance.
  Ron

  Hey, Ron.

  The problem has nothing to do with your script. You can see if you attempt to place the file from indesign tagged text by hand.

  Your instinct for divide and conquer for debugging is a good - have a short text file to work with is very useful - of course this is also true for the script.

  During the validation of the scripts on the forum, please do not use the syntax insert > feature Java which lies behind the > arrow in the toolbar. Otherwise, cut and paste your script are difficult requiring manual corrections.

  Anyway, your problem is that each paragraph can have only a single paragraph style, and it's the last one that you define.

  So in your IDTT file, you set the heading 1 paragraph style, enter the content of the paragraph and then set the style of paragraph votes to zero.

  If you have included a line break before setting the style of paragraph votes to zero, you must set the None style for the following paragraph. But since you have not, it resets just the style to the current paragraph.

  In short: success back before .