did not update recovery partition

Similar Questions

• I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

  I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

  Hello JesusVigo,

  Thank you for visiting the Microsoft answers community.

  Have you tried to use the disk of Windows XP, or Windows Update running default drivers to search for best driver for your sound card?

  Also, I found only 1 driver on your system gateway Web site is located here.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not getting recovery partition not detected

  Hello

  I use dv6-3000 series laptop.the problem is when I last formatteed my system, I moved my partition caught within another partition. Now I'm trying revocer my system as my OS has been corrupted. But while recovering his does not detect is not the recovery partition. Is it possible to make it to detect. Pls help me.

  Hello

  If you have changed the recovery Partition, it is extremely unlikely that you will get to work.

  There are two options are open to you.

  1. you can order a replacement set of recovery discs using the link below.  The use of these to reinstall your operating system will also recreate the recovery on the HARD drive Partition.

  Order HP recovery disks.

  2 another option you can try is described below.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All drivers additional and the software you can need is staring here.

  Kind regards

  DP - K

• Satellite L450D-11V - update recovery partition

  On my Satellite L450D-11V with Windows 7 Premium 64-bit, Tempro today said there is an important update that replaces the recovery partition with a new, to overcome the problem of error message on portable computers with more than 4 GB of RAM. Although I have only 3GB, it says that the update is for everyone because it can go to more than 4 GB in the future.

  It is all very well, so I downloaded and tried to run the .exe unpacked, but at half way through the installation, he stops and tells me that the update is only for 64 bit versions of Windows 7... which is mine. I got it for five days, it came with Windows 7 Prem 64 bit and I certainly did not use 32-bit downgrade DVD and it says clearly "64 - bit operating system" in my computer.

  Hello

  Update do you mean exactly? Can you post information please as filename, etc.. ?

  Normally there is no recovery partition. There is only one file called HDDrecovery on the second partition where you can reinstall Windows from this folder. On Vista and Windows 7, there is a hidden partition but it s the Windows recovery environment and has nothing to do with Toshiba.

  Moreover, I don t use TEMPRO because install updates manually if it of necessary.

• Update recovery partition

  I think that hp / compaq should create a cylindre update software that would allow a user to the client update their recovery partition, so that if they were to perform a recovery of the system don't we clear tell an OS - the operating system upgrade.  ex: Microsoft Windows Vista Home Premium, I want to update for HP/Compaq Windows 7 Home Premium.  In other words, the recovery partition would not return to the factory installed OS but rather to the OS upgrade.

  More probably, that violates the license agreement with Microsoft. At least, I imagine it would be. You're talking about two separate copies of separate operating system software.

• Fusion 6/6.0.1 and Mavericks Developer Preview 4 - installer does not create recovery partition

  I can't get a new facility for the Mavericks by using the last full download available on the Mac App Store (DP-4), to create a recovery during the installation partition. I always find myself with just an EFI and the main boot partition. The recovery partition is required to test the new features of FileVault 2. Has anyone of another seen elsewhere or found a solution? I filed a bug with Apple, but I feel it's more a VMware bug as installer even on a physical machine did in fact create a recovery partition. I tried to change the type of the machine virtual of SATA SCSI hard drive, but that has not made a difference.

  Thank you

  -Mike

  We looked at and we can confirm that the problem comes from the merger, not the Mavericks. We are working on a fix.

• AlienRespawn detects is not the recovery Partition

  I'm going to be upgrading to an SSD and was to check what are my dining options on my M17X r3 laptop.

  When I open AlienRespawn but, I see an error that AlienRespawn was not able to detect the recovery Partition.  It's may be missing or damaged.

  He said so to recover your computer to the original factory condition and restore the recovery Partition.  Use your system recovery discs.

  I have a backup of the laptop, but I don't know whether or not they are recovery disks.

  I checked, and Windows does not detect the RECOVERY volume.  The State is healthy (System, active, primary Partition).  Capacity free 19.53 13,16 GB space.

  That seem correct?

  I can do to help the AlienRespawn find the partition, or I have to use a different process when it's time for a reinstall?

  Thank you!

  I did everything above, and he always had the same error. I then notice in the free version, it will not creat a new backup so I bought the premium and it works now.

• SG300-10 - DHCP server did not update DNS (bind9) records

  Hello community,

  My SG300 is configured in Mode L3 in my Homelab, and the DHCP server is enabled.

  The switch runs on the Version of the Firmware 1.4.1.3.

  I have configured by a Pool of network VLAN.

  The default router IP address (Option 3), the IP of the DNS (Option 6) and the domain name (Option15) are also configured.

  DHCP works fine without problems.

  Customers get their inclusive information of router, DNS, and domain IP Configuration name.

  As a DNS server, I configured a server bind9 under winded raspbian.

  The bind9 is configured to allow dynamic updates and DNS works as expected.

  Manually using NSUPDATE I can make dynamic updates to bind9 DHCP clients areas.

  But this isn't what I want.

  I want to make the SG300 DHCP server dynamic updates to the DNS zones.

  Would be the Option DHCP 81 (Client FQDN) useful?

  Any idea is welcome. :-)

  Looking forward to hear from you because it drives me crazy.

  Best regards

  Rainer.

  Sorry for the delay in reply Rainer.  I tried to set this up in my lab and became GUI of entry of unexpected results that did not affect the packages at all.  Checked with my contacts and they advised me that it is not supported on this switch option 81.  Given that the client sends to the server on how to update DNS records, the switch does not support this dynamic configuration.

  Referring to the data sheet for the SG300, these are supported options listed:

  DHCP (12, 66, 67, 82, 129 and 150 Options)

  Here is the link to the datasheet.

  http://www.Cisco.com/c/en/us/products/collateral/switches/small-business-smart-switches/data_sheet_c78-610061.html

  Sorry about the information, but is not a supported option.

  James

• My recent update of bridge CC did not update ACR, how can I do this

  I've recently updated Ps CC to the 2014 version. My computer did not at that time there to day bridge. I asked Help Support update that. But in both cases, I found that a computer running the same operating system had a newer version of ACR (8.5.0.236), and one I'm having trouble w / still has a previous version (8.3.0.141).

  Is there an easy way to better update?

  Can I just find the page for the update on the Adobe site and download and install them - or is it not that easy and simple to do that?

  And if so, where is the download page - I can't say that the Adobe site is very easy to navigate to find things.

  Thanks for any suggestions...

  -Todd

  See if it might help:

  http://helpx.Adobe.com/x-productkb/multi/camera-raw-applictions-cannot-updated.html

  -Christmas

• iPhoto did not update with 10.11

  the OS X 10.7 in 10.11, iPhoto is grayed out. When I was invited to be updated manually, I thought it was 'bought' under another ID. He was "bought" at the same time and installed at the factory.

  Mac OS X 10.10.3 and newer include Photos, which is designed as a replacement for iPhoto and can import library. If you want to go on the use of iPhoto in addition to or instead of switch to Photos, click here and try following the instructions; you will only be able to do if you have previously associated with iPhoto with the Mac App Store.

  iPhoto is not intended to and does not update with Mac OS X, even if it was originally shipped with the computer.

  (143201)

• My Photoshop CC 2015.0.1 did not update to version 2015.1 cc

  My Photoshop CC 2015.0.1 do not update to version 2015.1 CC even after that my creative Cloud Desktop Panel updated it. My Photoshop is always CC 2015.0.1. What should you do?

  2015 all updates of Adobe CC: Direct for Windows download links | ProDesignTools

  2015 all updates of Adobe CC: directly download for Mac OS links | ProDesignTools

  There are 4 updates

• Did not update the field lengths

  All,
  
  I changed the lengths of field forms all day to IOM 9.1, and it does not update the actual column length when the form is activated. I came back to directly update to the sizes of the column in the database to get things to work. I missing something here, or are completely useless in IOM field length variations?
  
  S

  My experience is the same. You cannot change just reliable lengths using the client interface design.

  Slightly irritating and very dangerous if you don't know the question.

  Best regards
  / M

• Reinstall Win Xp SP2 clean did not update - error 0 x 80240036 and 0 x 80244019 - any help codes please?

  I was not able to download the service pack SP3.  The update system worked OK until I did the reinstall (simply by using the hidden OEM partition system) but the XP SP2 is perfectly legitimate and as that provided with the Acer laptop.

  Because Windows XP sp2 is no longer supported by Microsoft, Windows Update will not work as long as you have already installed the sp3.

  You need to download sp3 manually and install it.

  Download sp3 here (you are a 'professional' at the moment): http://www.microsoft.com/en-us/download/details.aspx?id=24

  Read on: http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/windows-xp-sp3-read-all-prerequisites-for-a-successful-installation.aspx

  Before you start, any trial software which has been reinstalled by using the hidden partition will be not functional (because the trial period has expired a long time ago).  You MUST uninstall any software of 'security', in particular anything Norton or McAfee and then install an antivirus of your choice (you may need to connect to the Internet to install some a / v programs; if this is the case with the one you choose, make party after all the updates below are completed, but should I uninstall McAfee/Norton stuff now.).  Use the appropriate tool to uninstall:
  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331 and
  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Log in as a user with "computer administrator" privileges and double-click on the downloaded file (WindowsXP-KB936929-SP3 - x 86 - ENU.exe).

  Be patient, and once installation is complete, go here and make the method of resolution 2--> support.microsoft.com/kb/943144 (if I were you, I use the instructions "Let me fix it myself" rather than "repair for me' - although this particular routine from Microsoft FixIt will probably work OK).

  Go to http://www.update.microsoft.com/ install the software required, and then click CONTINUE > select CUSTOM and scan.  Install the critical updates of security offered.

  The automatic updates to enable: http://support.microsoft.com/kb/306525

• Does not drive recovery partition creator & data - Satellite L300

  My niece asked me to re - install his Toshiba Satellite L300 laptop computer, because windows setup is a little buggy. She never had a recovery disc. Using Recovery Disk Creator Toshiba I tried to create a recovery disk.

  However, the program would not start. Check the directory of the program, it seems that the program is not just there. Later, I checked the laptop data partition.

  There was a card with HARD drive recovery. However, when using Windows Advanced Boot (F8 before Windows starts) there was no choice to fix the laptop. They have only choices were the standard options of windows (except the normal startup mode, etc.).

  In short, it seems impossible to re - install the laptop with the current information at your fingertips.
  What would be the next course of action? Is it possible to order a Toshiba restore CD?

  Another niece has the same specifications, it would be possible to use this notebook to create a recovery disk?

  I'm going to enjoy and look forward to your reactions.

  Hello

  It seems that something has changed on the HARD drive
  However, the fact is you ve no disk recovery and you can not use HARD drive recovery option.

  This means that you must order a new Toshiba recovery disc.

  You can do so here:
  https://backupmedia.Toshiba.EU/landing.aspx

  PS: a Tip If you want to use an option of searching this forum, you will find the right answer too ;)

• Update of the Sierra did not update

  I'm under 10.11.6 on a 2013 11 "Air w / 8 gb and 92 GB of free space on my ssd.  This morning, before I went to have breakfast, I plugged the computer to the power brick and ran the update for Sierra.  When I came back home and connected to the computer I ran "about this mac" in the Apple menu and indicated that I was always running El Capitan.  I searched my ssd to see if there is perhaps a .dmg file or file install somewhere, but there was not.  I also looked in the section updates from the apple app store to see if she was still showing Sierra, but it wasn't.  Also, I rebooted the computer and no change.

  Can someone enlighten me on what happened here?

  Looks like there was a problem with the download, installation failed.

  Try to do it again and this time stay with her so that you can see what is happening.

  You do backup before the upgrade?