Difference between [Zend Framework, Codeigniter] and [CMS such as Joomla]

Similar Questions

• Try to explain the difference between a DPS application and a coded / from scratch app.

  Guys, I need help.  I'm writing a guide for my clients regarding the DPS. I want to include some information on the differences between a DPS App and a code app. Any of you have ever had to explain that, and if you have, what did you say?

  The most obvious difference is that a DPS app is what you get InDesign and a coded app, you must have a coder.  But what are the feature differences? As I am not a coder and do not have access to the resources of coding, I'm at a loss.

  Thank you

  Karen

  They are large enough.

  In short, the DPS is a solution or a framework that allows non-technical people to create content for use on multiple platforms, with various limitations by platform. Especially there sense for Magazines and newspapers as a platform target, with a few exceptions.

  For example, DPS does not access the hardware device API, such as the cameras of the device, the GPS or accelerometer. Limits of the DPS depending on also what license you buy, for example, if they are a client of the company, they would be able to build a showcase custom, which is not available in the Pro licenses or simple editing.

• the difference between the intermediate process and materials first in BCP formulation?

  I do not understand the difference between the intermediate process and materials first in BCP formulation. could you give me an example to show the difference?

  The intermediate process - questions all the specifications that are used in the

  current specification.

  Raw - questioned the level of material first in the hierarchy.

  Hello Terry,

  It is used in the screen output Formulation based PCA. You can configure different PCA rule which is available in formulating exit point BOM, then when you start a screen of PCA in the base of the exit, you will see this rule.

  And the difference between the intermediate process and raw in PCA, let me explain with an example, I have a configuration hierarchy as below:

  OutputA

  A formulation

  Material X

  Output B

  Formula B

  Material M

  Material N

  If I select the output B in formulating A framework, and when I run a screen of PCA in the base of the output, I have three options:

  High level - it allows to extract A output attributes as PCA review the settings;

  Intermediate processes - it to retrieve attributes material X and B output like BCP review the settings;

  Raw - it will extract attributes of material X, output B, M and N of material material as PCA review the settings.

  I hope this helps.

  Thank you

  Jessie

• difference between the graphic image and blank image

  HI Forum,

  How can I get the difference between the framework that has graphics or links placed in it.

  and

  a framework without graphics or links placed in it.

  If I say this, it is applied to two things.

  so I need to get separate alert for the framework that has put in links and frame rectangle without links...

  REC = app.documents [0].pageItems.everyItem ();

  . constructor.name if (Rec.getElements () [0] == 'Rectangle') {}

  Alert ('the image contains image');

  };

  and the other, I like to do Forum...

  Thank you very much...

  Hello

  Iterate over doc.splineItems

  and check whether doc.splineItem [i].allGraphics.length == 0

  (no graphics placed)

  Jarek

• Any difference between the separate function and aggregation in sql query cost?

  Hello
  I've run many models sql stmts - such as:
  one) using a single table
  (b) using the two tables, using simple joins or outer joins
  
  but I didn't notice a difference in sql stmts in cost and implementation plan...
  In any case, my colleague insists on only using the aggregate function is less expensive compared to
  separate... (something I've not confirmed, that is why I believe that they are exactly the same...)
  
  For the situation described above under 1 sql... We could for example use
  

  select distinct deptno
  
   from emp

  select count(*), deptno
  
   from emp
  
   group by deptno

  select distinct owner, object_type from all_objects

  select count(*), owner, object_type from all_objects
  
  group by owner, object_type

  Have you ever found no difference between the two...?
  
  Note: I use Ora DB 10g v2.
  
  Thank you
  SIM

  Alexandre Gelin says:
  function separate and aggregation are for different uses and can give the same result, but if you use the aggregate function to get the separate records, it will be expensive...

  really? I find them almost identical to 11g. Actually GROUP BY is almost always more fast for me in the old days.

  article about this askTom Re: any difference between the separate function and aggregation in sql query cost?
  This applies mainly to the older oracle versions http://www.oracle.com/technology/products/rdb/pdf/distinct_derivedtables_groupby_sort_tech_article.pdf

• difference between client-side validation and validation on the server side

  Hello
  
  could someone make me pls know the differences between side validations server and client-side. will give only a few examples if you can

  Hello

  Validation server-side

  When the user performs an action that makes the form must be completed, OA
  Framework proceeds by all HTTP POST treatments - including the execution of all your
  level of attribute validation logic.

  Validation on the client side

  Whenever a form with the data entered by the user sends, UIX performs some basic validation Javascript onSubmit (he
  check required fields, formats, and data types) and sends the form only if the validation is successful.

  read Devguide for more details...

  Thank you
  Gerard

• What is the difference between the Service Station and Tempro?

  Searched for information on this, but have not been able to find:

  What is the difference between the Service Station and Tempro?

  I just run the wizard upgrade Toshiba and it installed the gas station but Tempro is already installed and seems to do the same.

  Concerning

  Bushy

  Hello

  These two tools are Toshiba one informs you of the new driver updates available on the Toshiba driver page.

  AFAIK Tempro is slightly older than the gas station.
  In addition the gas station seems to provide a bit more options and features like tool Tempro.
  However, I recommend using one my favorite utility's Service Station

• What is the difference between Ubuntu desktop edition and server edition?

  What is the difference between ubuntu desktop edition and server edition?

  Desktop Gets the window manager and terminal server :)

• Difference between Satellite Pro L300 and Pro A300

  Can someone please tell me the difference between Pro A300-21F and Pro L300-1RS as specifications on Tosh pages seem to be identical.

  Like us all, I'm looking for the more powerful machine at the lowest cost. TKS

  _Satellite pro A300-21F: _
  -Intel (r) Pentium (r) Dual Core processor T3400
  -SATA 160 GB (5400 RPM)
  -Chip graphics Mobile INTEL GL40
  -2 GB DDR2 (800 MHZ)
  -No Bluetooth
  -No fingerprint sensor

  _Satellite pro L300-1RS_
  -Intel (r) Pentium (r) Dual Core T3200 or Intel (r) Pentium (r) Dual Core processor T3400
  -SATA 160 GB (5400 RPM)
  -Chip graphics Mobile INTEL GL40
  -No Bluetooth
  -No fingerprint sensor
  -TV out (composite) or RGB external monitor available routes

  You are right, the two models of notebooks seems to be very similar and supports virtually the same devices.

  Good bye

• Re: Difference between Satellite L750-10F and Satellite L750-12 q

  What is the difference between the L750-10F and L750-12 q.

  Thank you.

  L750-12 q a 500 GB HDD and L750-10F has 750 GB of HARD drive.
  L750-12 q has USB 3.0 and USB 2.0 L750-10F.
  L750-12 q has REALTEK 802.11 (B/G/N) 13CH-RTL8188CE MOW - HMC and L750-10F has ATHEROS 802.11(B/G/N) V3.0 WB195-HMC w / BT + HS inside.
  L750-12 q is available in Poland and L750-10F in Germany.

  I found these differences. I hope I could help a little.

  Good bye

• What is the difference between the HX - 90v and HX - 80 coming cameras?

  What is the difference between the HX - 90v and HX - 80 coming cameras?

  Thank you!

  I'd say it's supposed to be a fill, a little brother to the HX90v

  It removes the control ring and the GPS, and I think the rest is the same.

  It is for those who want the HX90v but the price is a bit steep for the compact range, and they need not necessarily GPS or the ring of command, just a camera that works.
  This kind of thing, at least to my knowledge.

• Difference between the cDAQ-9174 and cDAQ-9178

  I have several cRIO-9081.  Each cRIO-9081 running NOR-DAQmx 15.5.  On four of the cRIO-9018 we show you cDAQ - 9178 with 8 modules.  Everything just worked.  On the fifth cRIO-9018, we tried to connect a cDAQ-9174.  The aircraft appeared in the Windows Device Manager and MAX, but MAX has indicated that the aircraft was missing (error-88705) and that Windows can't find a driver for the instrument.

  We then plugged a cDAQ-9178 in the fifth cRIO and everything just worked.

  What is the difference between a cDAQ-9174 and cDAQ-9178 other than the number of the module support?

  Paul

  Hi Paul,.

  It seems it could be a driver problem! What DAQmx version you have installed on two computers? Reinstall the latest version may be worth it because it looks like there may be corruption. You can find the latest version here: http://www.ni.com/download/ni-daqmx-15.5/5901/en/

  You can manually associate the device driver, here: http://digital.ni.com/public.nsf/allkb/5B80CAAA64413B4C86256C5E0000C1A7

  There are modules connected to the cDAQ chassis?

  Also, sometimes, this can happen if you do not restart your computer after the installation of the NOR-DAQmx driver. Restart your computer after the driver installation will allow you to reserve the device successfully. Here are a few others not to try:

  • Check the charger to device OR to see if it is running
  
  
  • Reset the service OR charger
  
  
  • Reset the MAX Configuration database
  
  
  • The system power cycle

• Difference between DAQmx DAQmx Base and acquisition of Legacy data

  Hello

  What is the difference between NI-DAQmx, DAQmxBase and acquisition of data Legacy and what are the characteristics of these materials

  See this FAQ.

  And it's the software, not hardware.

• What is the difference between the NEX-5 and NEX 5R

  I would like to know what is the difference between 5R NEX5 and NEX to help me choose the best.

  Thank you

  Here are some key differences between the NEX-5 and NEX - 5R.

  NEX-5

  • Sensor CMOS APS - C with a resolution of 14.2 million pixels
  
  
  • video recording Full HD 1080/60i
  
  
  • the speed of 7 frames per second in burst mode
  
  
  • ISO sensitivity up to 12800
  
  
  • Sweep Panorama and 3D Sweep Panorama modes
  
  
  • Autofocus contrast with 25 points

  NEX5-R

  • Sensor CMOS APS - C with a 16.1 megapixel resolution
  
  
  • video recording Full HD 1080/60 p
  
  
  • the speed of 10 frames per second in burst mode
  
  
  • ISO sensitivity of up to 25600
  
  
  • Panoramic scan mode
  
  
  • Quick autofocus hybrid with contrast of 25 points of 99 points phase detection autofocus and auto focus

  In addition, the NEX5R has built-in Wi - Fi that allows you to install applications and extend the functionality of the camera. Built-in Wi - Fi will also allow you to transfer images wireless to a smartphone, Tablet, the computer and the TV.

  If this post answered your question, please mark "accept as a Solution.

• What is the most important difference between 3D Picture control and controlling the display of Simulator

  I want to create a simulation of 3D on the front panel, and I see that we can use a 3D image control or a display of Simulator control. It seems that each of them can be used at the same position. What is the most important difference between 3D Picture control and display of Simulator?

  Hi sfh1,

  You are right, I found examples of Robotics that use 3D photo control and display Simulator control to display a scene 3D on the front panel. After further research, it seems that control the display of Simulator adds additional features compared to the 3D picture control. The control displays Simulator allows the user to right-click control during execution and change the background color, draw fashion, draw contact, view the ID of robot, display sensor data, suspension of service Simulator and reset service Simulator.

  More in depth on these options and the display of control Simulator can be found here:

  http://zone.NI.com/reference/en-XX/help/372983D-01/lvrobogsm/robo_controls_concepts/

  If you would like more information on the picture here 3D control is another resource:

  http://www.NI.com/white-paper/3170/en/#toc2

  Kind regards