Difference module

Similar Questions

• My HP Pavilion a6235x BSOD is every day!

  Model: a6235x

  : AMD Anthlon 64 X 2 Dual Core 6000 + 3.00 GHz processor
  RAM: 3070 MB
  The system is 32-bit operating system.
  (This is Windows Vista, is told by the way).
  My system will BSOD in almost every way possible - honestly, I have yet to attend an another BSOD I've not seen before. Help!

  Hello

  See the above troubleshooting tool and set the minidump so that we can analyze it.

  The system has at least 3 GB of total RAM and maybe 4 GB is not just
  unless there is a problem with the memory or the memory to low memory
  handling.

  ====================================

  Here are the ways to solve the problems of the BCCode: 1a

  Be sure to carefully test the memory. Don't forget what to do with the memory tests
  does not detect all errors such as the tiny speed between memory differences
  modules that appear to be identical. It is therefore necessary to exchange the
  modules and out in various combinations and models (see memory
  Test methods in the next message).

  To see how to use BlueScreenView and MyEventViewer to troubleshoot the Bluescreens see the
  Methods indicate in this thread - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------

  BCCode: 1a 0x0000001a

  The main cause of all who's memory probems if there may be other causes.
  See the test article in the next message memory.

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
  the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
  sound or other system functions that it these get hot. Try adding a small fan blowing in
  the vents as a test.

  Have you recently added any hardware? Have you updated any drivers just before this started?
  (Check control panel - updates of Windows to see if all drivers have been updated it on the)
  This started the time) likely guilty hand are video driver, other great drivers, memory, and
  antivirus/antispyware/security products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when
  you get these sections and then back to the resolution of the problems according to the needs.

  BCCode: 1a 0x0000001a<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error Windows 8 DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

  My phone rebooted in the middle of the night and there was a blue screen. I have no idea what caused it but I downloaded the memory dump file and got:

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  

  And that's all that I could understand him. I don't know what that means for the rest of the text. Here's my minidump: http://1drv.ms/1mrDTf3

  Thank you!

  * EDITED WITH THE CORRECT FILE

  Hello

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check has CAUSE D1 amd_sata.sys AMD AHCI 1.2 device driver.

  BugCheck D1, {e8, 9, 1, fffff880011ac27f}

  Probably caused by: amd_sata.sys (amd_sata + 727f)

  1. check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. Update the BIOS, chipset of low-level driversand on-board major
  and drivers of different devices (see methods of updating the driver in the previous answer).

  BiosVersion = F.15
  BiosReleaseDate = 04/10/2012 - update BIOS, drivers from the chipset and drivers of key devices.
  SystemManufacturer = Hewlett-Packard
  SystemProductName = HP Pavilion Notebook PC g6
  Family = 103C_5335KV G = N L = CON B = HP S = PAV
  SystemVersion = 0889110002305910000620100
  SystemSKU = C9G71UA #ABA
  BaseBoardManufacturer = Hewlett-Packard
  BaseBoardProduct = 1849
  BaseBoardVersion = 57.2F

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  -----------------------------------------

  2. make sure to run checkdisk (chkdsk):

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Windows key + X (or right click in the lower left corner) - (Admin) command prompt

  C:\Windows\System32\ >

  At the prompt, type in SFC/scannow above
  (There is a space between C and /)

  How to run the command "SFC/scannow" at startup or in Windows 8
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  -----

  Then run CheckDisk (chkfdsk/f/r)

  File (formerly Windows Explorer)

  Right click on drive C: - Properties - tab tools - error checking - Check

  Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  ------------------------------------------------------------------

  3 a. Remove ALL power and then remove and reinstall the memory - and check the hard disk
  cable if you can (can usually only check one end as appropriate).

  How to reinstall a desktop memory Module
  http://pcsupport.about.com/od/fixtheproblem/SS/reseat_memory.htm

  The relocation of the supply and internal data cables
  http://pcsupport.about.com/od/fixtheproblem/SS/Reseat-power-cables-data-cables.htm

  3 b. check very carefully the memory (see memory test methods below). Keep in mind that
  tests of memory do detect all errors such as the tiny speed between memory differences
  modules that appear to be identical. Thus, it may be necessary exchange modules to

  in different combinations and patterns.

  4 use all the methods in the previous resolution of the problems and if necessary AFTER those run Driver
  Check.

  BCCode: d1 0x000000d1<-- read="" this="">
  

  * 1210.html http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Tecra A4: The difference between the memory modules

  Hello.

  Could someone explain the difference between the modules of memory called PA3311U -1PA3311U and M25 -2M25?

  And is it possible to use Tecra A4 with PA3311U - 1 M 25?

  Thank you.

  Hello

  Tecra A4 supports these modules:

  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  In addition, you can google a bit for cela other numbers of add-on memory and compare these parts. I m you will find a host of information

  Good bye

• Tecra A2 - what is the difference between the cooling modules Tecra A8?

  Hello

  I have Tecra A2 and my fan is almost 'dead '. So I think to buy a new one.

  And here my question:
  "What are the differences between Fans (P000401740) A2 and A8 (P000463770) for example?"

  Because despite the construction of the "rotor" as well as details of construction of the case they seem to be exactly the same.
  If I buy this A8, it would work with my laptop?

  Kind regards
  Christopher

  Hello

  I m not very well what s the difference between these two modules of cooling but the fact is that the motherboards are just different and I doubt that a cooling module that was not designed specifically for the Tecra A2 series would correspond with A2 motherboard and case.

  That's why I recommend buying a cooling module which has been designed especially for this series!
  I think you can order the Toshiba ASP.

  Good bye

• difference between the real time module and module fpga

  Hi experts,

  I was wondering if someone could tell me the difference between the FPGA and the module in real time (in short).

  My understanding is that the FPGA module facilitates code LV that can then be designed for the specific advice of RIO, I have used this a bit in the past.

  The real time module, I'm a little more unsure about, all I know is that it allows the creation of a 'real time' i.e. deterministic environment.

  My request is this: I wish I had several control loops running on two tables of RIO, with the host PC mainly used for recording data and user interface. I see that I have no need of RT on the host (Win XP should be good).

  Do I need the RT module?

  You are right.  In the scenario you describe, you won't need to LabVIEW RT. LabVIEW RT is used to create a deterministic execution on specific targets for intel such as the PXI-8106 and PXI-8108.  You can still use strings and floating point on RT.

• What is the original Lightroom hang up, mainly in the develop module?   I've recently updated for Windows 10.  I tried to reinstall LR, but it made no difference.

  What is the original Lightroom hang up, mainly in the develop module?   I've recently updated for Windows 10.  I tried to reinstall LR, but it made no difference.  I get no error message, just the blue spinning wheel.

  Hi Michigoose,

  Please go the Edit option in the library Module, then go in the preferences.

  Go to the performance tab and uncheck the option "use graphics processor.

  Restart lightroom and working in the develop Module.

  Please let us know if it helps.

  Kind regards

  Tanuj

• Update modules with the capital letters and tiny rulename make the difference

  Hello
  
  I had a problem when I'm experiementing the code example in the semantic oracle developer guide. the sample is to update a modules-family_rb:
  
  UPDATE mdsys.semr_family_rb SET
  background = ' (? x: parentOf? y) (? y: parentOf? z) (? z: height? h)'.
  filter = ' (h > = 6)',
  alias = SEM_ALIASES (SEM_ALIAS (", 'http://www.example.org/family/'))
  WHERE nom_regle = 'GRANDPARENT_RULE ';
  
  in the last line, the where clause, the name of the rule (GRANDPARENT_RULE) is a capital letter; but it's tiny, when I inserted in modules. However, when I updated the modules by using the name of tiny rule, I got ' 0 inserted row"which means nothing updated. and, the following query returns the wrong result. However, if I've updated modules by using the name of rule of capital letters, I ' 1 inserted row"and the result of the query is correct. I thought that the uppercase and lowercase should made no difference. can someone tell me why the results are different? Thanks in advance.
  
  Kind regards
  Hong

  Salvation Hong,

  When a rule is inserted in a rules database, his name will be stored as all capitals.
  So what you have observed is expected.

  If you don't want to change the name of the rule manually, you can probably do something
  Like this:

  UPDATE mdsys.semr_family_rb SET
  background = ' (? x: parentOf? y) (? y: parentOf? z) (? z: height? h)'.
  filter = ' (h > = 6)',
  alias = SEM_ALIASES (SEM_ALIAS (", 'http://www.example.org/family/'))
  WHERE nom_regle = upper ('grandparent_rule');

  Thank you

  Zhe Wu

  Edited by: alwu November 30, 2012 12:15

• The difference by calling an application to a backing bean module

  Hello everyone!
  
  
  I do not understand exactly, where is the difference by calling an application of a bean of the following support module.
  
  Example 1

  FacesContext context = FacesContext.getCurrentInstance();
  ValueBinding vb = context.getApplication().createValueBinding("#{data}");
  BindingContext bc = (BindingContext)vb.getValue(context);
  DCDataControl dc = bc.findDataControl("AppModuleDataControl");
  AppModuleImpl appModule = (AppModuleImpl)dc.getDataProvider();

  Example 2

  String amDef = "model.services.AppModule";
  String config = "AppModuleLocal";
  AppModuleImpl appModule = (AppModuleImpl)Configuration.createRootApplicationModule(amDef, config);

  Example 3 (same as example 1?)

  String EL = "#{data.AppModuleDataControl.dataProvider}";
  FacesContext fc = FacesContext.getCurrentInstance();
  ValueBinding vb = fc.getApplication().createValueBinding(EL);
  AppModuleImpl appModule = (AppModuleImpl)vb.getValue(fc);

  Please can someone explain, the three examples do? What kind of example is best to call an application-module to a backing bean method?
  
  
  Thanks and greetings
  Majo
  
  Edit: I use ADF BC 10g in JDev10 :)

  Hello

  BindingContext bctx = DCUtil.getBindingContext (request);

  There is nothing else that #{data}. Best is to always access #{bindings} El to get a handle to the binding object. This way you can be sure that the object exists and is instantiated.

  DCBindingContainer links =... solve #{bindings}
  BindingContext bctx = bindings.getBindingContext ();
  Control of DCDataControl = bctx.findDataControl ("Name");
  ApplicationModule m = control.getDataProvider () (ApplicationModule);

  Frank

• NB200 - only little difference in speed between the modules of RAM?

  Hello everyone,

  Recently installed Windows 7 on my NB200 and thought I would setup an extra RAM.

  The RAM only I could get, was 2 GB of 667 MHz, as opposed to the 800 MHz supplied with the NB200. I thought that double the RAM would more than offset the slight difference in mhz between the new and old Rams.

  As I understand it, it's only little practice speed difference of real world, between the 667 MHz and 800 MHz RAM, is - this correct?

  Also: The 2 GB of RAM, I had had twice the amount of chips on the RAM slot than the old. Should I be concerned? I'm worried that doubles the amount of chips in a little place could lead to problems of heat/cooling... Any opinions?

  Thank you!

  There is no much difference between 667 and 800, in fact, I think the CPU at 667 anyway, but 800 races comes because of the limited availability of 667 RAM.

  Cooling should not be a problem if the RAM uses the same calendar and turn at the same voltage as the original of the RAM.

• Satellite A30-203: Question about the differences of memory modules

  Satellite A30-203
  512 Ram part no PA3312U - 1 M 51
  512 of Ram Part No. PA3312U - 2M 51, can someone tell me what is the difference between these two parts of RAM apart from the retail price.

  Hello

  The PA3312U - 1 M 51: 512 MB - SO DIMM 200 - pin - DDR 333 MHz / PC2700
  The PA3312U - 2M 51: 512 MB SO-DIMM 200 pin - DDR 333 MHz / PC2700
  http://UK.insight.com/apps/Productpresentation/index.php?product_id=TOEA048EF

  Sorry, but I don't see any differences.

• What is the difference between abandonment and reset in Laview FPGA module

  Hello

  I used Abort in Labview FPGA e-mail trying to stop the running program in FlexRIO while I got an unexpected behavior.

  After replacing the demolition of the reset all goes well.

  What is the difference between these two functions?

  Thank you

  Fang

  Hello Fang,

  If this answers your questions, then please indicate that answers your question by clicking on "accept as a Solution.

  If that doesn't answer your questions, so please let me know.

• difference between control flow and check knowledge module

  Hello

  I know ckm and flow control. What is the main difference between the Frother and CKM?

  CKM is the model of knowledge that ODI will use to check all the constraints you create.

  Flow control is the way to a check constraint during the flow of an interface (it's way happens to you in your integration tables [temporary]). This method deletes the data of 'bad' and it will record in a table of $ E. Also, you have some option to recycle errors (next ODI run will try to reuse these data)

  Static control is another way to check your constraints. This is static as its name suggests and is average, it will only count the errors, but it won't do anything with the data. It might happens in the source tables.

  The most used method is the regulator of throughput with certainty, but static electricity has some advantages too.

  For example, flow control has only a little when you check duplicate data. When he found it eliminated the two registry (or more if there are more). It's average, you get nothing in the end.

  You can use the static control to check your sorce tables and create a process to eliminate or filter duplicate data, allowing only data duplicated to cross.

  Hope this can help you.

• Differences of develop module previews

  I'm looking to a TIFF file (file adjusted, intact in Lr and all adjustments including output sharpening applied in PS) develop the module, it seems normal to the level of zoom 1:1... but when I change the display in full screen (with keyboard F), Lr poster preview blurred. Any thoughts... Thank you.

  Normal to the point overview of the module:

  

  Develop an overview of the module in full screen:

  

  Yes, Alper, if the base file changes, it affects all virtual copies - you will need to have separate actual copies in such cases...

• What is the difference between the cFP-CB-1 and cFP-CB-3 module