Dimension 2400 audio cd wave of dvd

Similar Questions

• My computer comes with two CDs/DVDs? Dimension 2400

  Need to know if my computer has a DVD as well as CD or can I get a driver for play it movies?

  Look on the front of the drawer where you insert the CD.  If the device is able to read or write DVDs, there's a "DVD" logo it.

  Or you can go to Dell for the Dimension 2400 and enter your Service tag by clicking on the link that says "enter a Service number.

• DVD Rom does not work in the Dimension 2400

  I have a Dell Dimension 2400, operating on Windows XP service pack 3, him comes from the computer with a CD burner and I need to install a DVD player, so I bought a HL-DT-ST-DVD-Rom GDR8163B, I installed the DVD and the computer recognizes the DVD-ROM and device manager says it works fine.

  When I try to use the DVD to play DVDs or CDs, it starts to run, but slow, then after a few seconds it stops, if I go to my computer, the drive is there and if I click the icon it says insert the floppy, puppy little drive upward and then stops.

  I had also installed on this computer Sonic Record now Version 7, I removed that thought it might be in conflict, but no help.

  I tried the fix for WIndows to delete the upper and lower limits

  I was also told that the computer is old and she might need a firmware update or something?

  Can anyone help?

  Osprey, you reason the drive was bad, I went and picked up another drive today and it works great, thanks for all your help.

• My external CD/DVD burner does not work with Dell Dimension 2400 XP

  I have a Dell Dimension 2400 desktop but the CD-ROM supplied with the PC is no longer works it is stock and does not open, this is the reason why I had to buy an external which has the Maxtor 6E040L0 pilot, he worked for a while but don't any more. It is listed in the Device Manager and indicates that the device is working correctly, it is also listed in my computer, in the tag properties indicates it works. What can I do? I am not informed PC and don't have the money to hire a technician. Please, I beg you! Help. Thank you.

  Jose

  Hi JoseCedeno,

  See the following troubleshooting article:

  http://support.Microsoft.com/kb/982116

  I hope this helps!

• Dell Dimension 2400 desktop w/XP Home Edition: video card Question

  Hello people... last week, I got a desktop pc from a friend who walked away, Dimension 2400 desktop with Windows XP Home Edition. I plan on upgrading it and either sell it or it give. Last night, I ordered a titled graphics card "ATI Radeon 9250 card 256 MB DDR PCI"... which, after purchasing, I discovered via google and other search engines it takes to 220W - 250W power... the power supply installed is 200W... fundamental question is: should I upgrade the PSU? ". Or 200 will do well. Thank you!!!

  Jimmy

  Dell Dimension 2400 desktop SPECS: Intel Celeron 2.40 GHz PCU; Hard drive 40 GB IDE WDC Caviar WD400BB-75JHC0; Optical drive DVD-ROM IDE; Installed Maxxed-Out @ 2Gb (2x1Gb) DDR1 memory;  Windows XP 32-bit Home Edition with COA & Code product key sticker

  Hello

  Welcome to the community

  Have you tested the video card? The computer works fine with the new card? In this configuration, I suggest to upgrade the power supply. You can get 250W or higher power. If the computer is on, you can wait for that stop at random. Let me know if you still need assistance.

  Kind regards

• upgrade of dimension 2400 heatsink

  No one knows what other heat sink or cooler I use in my dell dimension 2400 I can't seem to find another at all my old work well and help my computer on sleeves

  I have installed a standard spare heater Socket 478 in my 2350, similar to the 2400, but lost BIOS fan control and had to install a fan controller. I have tried both a Rosewill and a Zalman 7000 ALCU.

  If you're wondering, the 2400 is standard mATX case, apart from the audio before, wiring is compatible with the standard headers. Regarding the audio before, he has the standard wires and can be rewired for an ordinary 2 x 5 socket Molex, which I did with a Dimension 3000 (same chassis).

  Meanwhile, the 2400 has been designed to work with the heatsink you have, then why is it overheating? Perhaps the bracket is broken and the radiator is not firmly attached to the CPU? If you need a new slice, standard Socket 478 units could operate; I replaced the broken leg in my 2350 with a new generic one from eBay.

• Satellite Pro A100: CD/DVD player will not play the audio CD or video DVD

  People,
  I have a Satellite Pro A100, with a RUG * a DVD-RAM UJ - 841 S Drive.
  It will read fine data disks, but refuses to play with the audio CD or video DVD.

  I tried to uninstall & Re-Installing DVD - RAM Driver;
  That got rid of the "IO error" that I received, unfortunately I don't notice the full error: S.
  He now just doesn't see the drive. Someone at - it ideas?

  I did a full windows update, and the Toshiba Diagnostic util tell me anything useful except "Fail" :(

  I found a thread in this forum that describes a similar theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19747&MessageID=72404

  Sometimes this error is displayed because the player does not support the environment.
  Always it is every way is supported by readers and I think that in the user manual, you will find an index CDs or DVDs compatible

  Maybe the drive is defective and can not calibrate lens in the right position.
  But this laptop is not very old, and I can't imagine that the drive is defective
  However, nothing is impossible.

  What you can do is to carefully clean the lens and see that it will help.

• New HP 2011 x 20 '' LED monitor for old Dell Dimension 2400. necessary graphics card?

  My in-laws have an old Dell Dimension 2400 and the monitor exploded. I bought a new HP 2011 x 20 '' LED monitor. My WIRE went to set up, and he tells her that a HMDI graphics card is required.

  This is a pretty old computer. I think he might have as... 512 MB of RAM. Is there an inexpensive graphics card that will meet their needs?

  And besides, when they buy the graphics card, are there all the cables that they must reach a new monitor to an old computer?

  Thank you very much!

  Nice description of Dell:
  Video connector to 15 holes :-)
  
  Seems to be a VGA connector.
  
  From the description of the monitor:
  http://support.HP.com/us-en/document/c02643130
  There is an also vga connector, so you will have no problem to connect the two.
  
  No additional card is necessary, no other cable - just use the old vga cable.
  
  Your only problem might be the resolution:
  resolution 1600 x 900 set at the factory for the monitor.
  
  I don't know if you can set the resolution to Dell, you should test.
  
  Otherwise a 4:3 normal/old monitor would be better than this 'big screen' new.
  
  HTH
  C.
  
  P.S. the Dell printer documentation:
  http://support.Dell.com/support/eDOCS/systems/dim2400/

• At the start, receiving the message "Primary Drive 1" not found on Dell Dimension 2400 desktop

  Original title: primary drive 1 not found

  I'm helping a senior Windows user with a problem on his desktop Dell Dimension 2400.  At the start, he gets the message "Primary Drive 1" not found.  Can someone point me in the right direction as to what measures to take next?

  THX,

  Mike T goes.

  Hi Mike t. in Virginia

  You can check out the following link and try the steps suggested by Samhrutha G, Support Engineer, December 3, 2010 and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/primary-hard-disk-drive-1-not-found/fa3e591f-daeb-47bf-8f6f-3238f9507b6a

  Hope this information helps.

• Dell Dimension 2400 will not meet the key USB WIFI Netgear

  Dell Dimension 2400 Windows XP.

  Trying to get my old Dell back in action, but I ran into a problem. NO INTERNET.

  I have the WIFI in my house but I can't connect wirelessly with the desktop computer.

  I have a NetGear Wireless - N Dual Band, but dell WNDA3100 USB won't pick it up. The flash player is on, but it will not install the new software. It is said there was a problem and it probably won't work correctly.

  Any ideas? Thank you!

  first go to the device driver and uninstall everything dealing with netgear.

  also if it is listed in Add/Remove to uninstall and restart.

  https://www.Google.com/#q=NETGEAR+Wireless+n+dual+band+WNDA3100+USB+XP+installation+guide+and+software

  above is a search page with instructions for installing xp

  you have version 1 or 2?

  just a thought you have wireless zero config service started/automatic services?

  After all your updates should be installed which will disable the autorun, so that when you insert a usb key, nothing will happen until you go to my computer and click on the device to open it, this was done so that you would have a chance to scan a usb usb being one of the fastest ways to spread a virus If she had previously plugged into an infected pc.

• Error: "Windows cannot start because of a configuration of the disk of the computer problem" in computer Dell Dimension 2400 Windows XP startup problem.

  Original title: problem starting on a Dell Dimension 2400 - how to set up the drive with a keyboard.

  I have a Dell Dimension 2400 with Windows XP, start, he can't go to the home screen, so I can't use the suggestions to start right click.

  The error message indicates "Windows did not start because of a configuration of the disk of the computer problem".
  "Cannot read disc startup selected." check material stand of disk and the path.
  How to set up or fix this problem with a keyboard

  Hi MarieButler64,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.

• I bought Windows 7 install on my Dell Dimension 2400 currently Windows XP. I can move program Windows XP my laptop that is running windows 98?

  I bought Windows 7 install on my Dell Dimension 2400 currently Windows XP.  I can move program Windows XP my laptop that is running windows 98?  I need to access or code # s to do this and if so, how I get supplied with the printer Dell reinstallation disks have not all codes on them?

  original title: reuse of windows xp

  I bought Windows 7 install on my Dell Dimension 2400 currently Windows XP.  I can move program Windows XP my laptop that is running windows 98?  I need to access or code # s to do this and if so, how I get supplied with the printer Dell reinstallation disks have not all codes on them?

  No you can't. Given that it's a Dell and it came with Windows XP pre-installed, it's an OEM of Windows version.  The biggest drawback of an OEM version (at least in the USA) is that its license it permanently binds to the computer first it is installed on. He can never legally be moved to another computer, sold, or given to outside (except with the original computer). If the computer dies or is stolen, your license dies with him.

  And let me ask you as if you checked to make sure everything on the Dell is compatible with Windows 7, and there are Windows 7 drivers for all your hardware that requires it.

• Dimension 2400

  I have a HP Dimension 2400 since 2003.  I want to add RAM chips and need to know what kind I need.  Any help would be appreciated.

  Hello:

  Dell doesn't have the Dimension 2400 HP.

  Here is the link to the page for your PC tehcnical specifications:

  FTP://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-2400_service%20manual_en-us.PDF

• What's Dell Dimension 2400 desktop computer capable of capturing a wireless signal? Should this function be switched?

  Dell dimension 2400 desktop computer was plugged into the wireless router we have. We got a new computer and moved the old desktop (Dell 2400) in another room. It is not picking up, or even searching for a wireless signal. She still has this ability? How can we it give this ability?

  The Dimension 2400 is not normally a built-in wireless networking capability.  To view, go to the Control Panel > Classic view > System > hardware > Device Manager and double-click network adapters .

  If that doesn't show wireless network card, you can add it by buying a USB wireless network adapter or a Wireless PCI adapter card .

• Dell Dimension 2400 CPU

  I would like to know what processor for Dell Dimension 2400 can use as many of the ram size and what is the size of the compatible ram. From now on, my Dell Dimension 2400 has the Intel Pentium 4 and I want to make my computer faster.

  JohnLabib

  I would like to know what processor for Dell Dimension 2400 can use as many of the ram size and what is the size of the compatible ram. From now on, my Dell Dimension 2400 has the Intel Pentium 4 and I want to make my computer faster.

  JohnLabib

  The Dimension 2400 supports a maximum of 2 GB (2 x 1 GB modules) RAM DDR.

  The Dimension 2400 can use 400 MHz or 533 MHz, Socket 478, P - 4 Northwood or Celeron processor with a 512 k or more small cache.

  The maximum size of the processor is a Socket 478 Northwood P4 3.06 GHz, 533 MHz FSB processor.

  The 2400 will not take Prescott processors [1 MB cache].

  Before upgrading the processor, verify that the latest BIOS is installed, with BIOS version A03 CPU microcode update has been added in support of the latest processors.

  Bev.