Dimensions of the screen in pica?

Similar Questions

• Dimensions of the screen updating is not in time for the links?

  I have an application that displays images. It resizes them based on the rotation of the screen, usually affecting "picwidth = screen.width', where"picwidth"is an attribute associated with the width of each image.

  I have so similar to several functions:

  protected function changeOrientation(e:StageOrientationEvent):void

  {

  PicWidth = screen.width;

  PicHeight = screen.width * 1.467;

  }

  I also tried to do this with the variable of the object itself:

  protected function changeOrientation(e:StageOrientationEvent):void

  {

  IMG. Width = screen.width;

  IMG. Height = screen.width * 1.467;

  }

  and in the emulator, these functions operate correctly. But on the device, "screen.width" always seems to enter the value before the change of orientation, giving the dimensions that are exactly the opposite of what I needed.

  NOTE: this does not only happen with images, it happens with the Group of containers, TextAreas, something whose dimensions depend on the dimensions of the screen.

  I tried to simply change the values so it gets the values and assigns them to variables against the account of the delay and then, they operate on my device but they are back in the emulator and I'm scared of what other devices work as does the emulator, and it will be broken once more.

  Is it a good solution to this?

  This problem was corrected by:

  change the event listener of:

  stage.addEventListener (StageOrientationEvent.ORIENTATION_CHANGE, changeView);

  TO:

  stage.addEventListener (Event.RESIZE, changeView);

  and by the way of an «event"rather than a"stageOrientationEvent»

  has worked in all cases that I needed. Kindof it's a shame that the only thing that StageOrientationEvent.ORIENTATION_CHANGE is designed to make can be upgraded by a more general function...

• How to set the default zoom according to the screen in Linux level?

  Starting from the same account, I can use different types of screens: low and high DPI. I would like to have the font size (and more generally, the zoom level) right of each screen.

  To set the default zoom level, you can set the layout.css.devPixelsPerPx, but we can't define it it fixed-value, which is not OK, because I would like that the value depends on the environment (as for the font size in the menu which is always OK, because it depends on the resource Xft.dpi X 11).

  Note: I have several profiles, while it is not even possible to write a wrapper that could modify the prefs.js file, because I don't know in advance which file would I need to change.

  What can I do?

  One possibility would be to use the mozilla.cfg file in the Firefox program folder.
  This file can contain JavaScript that runs with full chrome privileges and it it not difficult game of the pref layout.css.devPixelsPerPx to a correct value for the screen currently attached.
  You will need to know how to calculate the dimensions of the screen.

  • http://Mike.kaply.com/2012/03/16/customizing-Firefox-AutoConfig-files/
  • http://Mike.kaply.com/2012/03/22/customizing-Firefox-advanced-AutoConfig-files/

• Satellite M30X-115: I need to replace the screen

  Hello

  I need to replace the screen on my laptop but I can't find references one is on. Is it possible to have this references or references to a compatible standard model and of course, an easy to find the object: o)
  Thanks for the help of the Tower

  Hello

  As far as I know the Satellite M30X was delivered with a screen 15.4 "(1280 x 800) view wide TFT color display."

  Only the dimensions of the screen are important. So if you want you can search a 15.4 "display.
  By the way; the display is one of the most expensive parts of laptop. Perhaps a second hand M30X, or a display of second hand would be a better solution as to buy a new screen for around $ 300.

  Greetings

• How to get the size of the screen in QML?

  Is there a way to get the width and height of the current screen in QML?

  Because I have to use absolute layout and I want to also leave the post of controller could correspond with the other dimension of the screens, I intend to calculate the position based on the size of the screen to locate the controller to a relative position. BB7 development, he is available to do this way. But I have not found how to do it in BB10 QML.

  Thanks that someone can understand.

  This might help

  https://developer.BlackBerry.com/Cascades/reference/bb__device__displayinfo.html

• The screen size of the virtual machine on Mac

  Hello... I'm under Fusion 3 on Mac OS 10.5.8. After installation of Fusion 3 (upgrade to v.2), I can't make the size of the Windows XP machine to adjust to the dimensions of the screen of my Macbook Pro or my HP screen more. I used (in Fusion 2) to be able to just drag the screen by the corner to fill the size of the screen but the screen Windows stop now about 1/2 inch to reach the edges. It can be lived with, but I would like to recover my old screen size, if anyone has a suggestion.  Thanks much for any help. (P.S... I prefer to use single window on the unit or full-screen view.)

  Quite often a facility 'Edit' and or 'Repair' of VMware Tools will not fix the problem even if one might think of these names should be, it is always best to completely uninstall/reinstall VMware Tools when related problems of VMware Tools.  Then, go to add/remove programs in Control Panel in Windows guest operating system and uninstall VMware Tools and then after that it restarts to install VMware Tools in the Virtual Machine menu.  If this is not set then uninstall/reinstall VMware Fusion and note that this does not remove the virtual machines if.

• Dimensions of the Samsung GalaxyTab 10.1 Folio

  I want to create a folio for Samsung GalaxyTab (horizontal only)

  I searched around the forum and can not figure out if must have correct dimensions for my documents .indd

  > 1280 x 800

  > 1280 x 752

  > 1280 x 750

  can someone tell me please precisely the right size?

  Thank you very much

  The Samsung Galaxy Tab 10.1 has dimensions of the screen 1280 x 800 with a bar system 48 pixels. If you create a horizontal folio only 1280 x 752, the content will fill your screen with no black bars. (A folio of 1280 x 800 would be put on the scale and Letterbox.) A folio 1280 x 750 would be nice.)

• I just installed windows 7 on an old dell dimension 4500 s. The installation went well, but I have a problem with the resolution of the screen. The resolution is set to 640 x 480 and my monitor is much better than that.

  • Just installed Windows 7 Home Premium Upgrade - 32-bit
  • Installed on the old Dell Dimension Dsktp 4500 s
  • Monitor is a Dell S199WFP Flat widescreen.
  • Everything seems fine, but the screen display resolution is messed up
  • Display resolution is set to 640 x 480, then it should be something like 1024 x 768
  • I can't change the resolution in the control panel
  • the screen is recognized as "Non - PnP Monitor on Standard VGA Graphics Adapter generic
  • It also seems that the driver is up-to-date

  What's wrong?!? Someone please help.

  Thank you!

  I remember that when I tried to install the driver, there's a message that says that it is said that it is not supported.  I don't know if I reinstalled the older operating system and then the new driver and vista or if there was a button to install the driver, even though it was not taken in charge.  Most likely, I installed the driver on the old XP operating system and then applied the upgrade to Vista. I always run a clean install to clean any spyware etc. The driver supports the X 9 live is what it takes. Use Vista driver is already installed.  I plan to upgrade to windows 7 in January and display the results.

• Dimensions of the exact screen of the X220T for protective Film?

  Anyone know or have a X220T that they can measure the exact dimensions of the tablet screen? I intend to order a screen protection sheet to avoid scratches (to preserve the resale value).

  If you can help, that would be greatly appreciated.

  I got my X220T today and I measured the screen including the black border that is 286-287 mm horizontal and vertical 168-169 mm.

• Dimensions/fields displayed on drill holes in the screen

  Is there a way to display other dimensions/fields on the screen in which you load in the system target to break through?
  
  To develop, suppose I have an import file that I have the following fields: entity, account, Department, affiliation and amount. My metadata on the target system has a home for all fields except dept because we do not load Dept. So I go ahead and I created my import format to capture all fields except dept that I don't shoot in because I'm used to load it. I load my data and now I break my target system (click on $1000) and FDM launches and I click on the initial screen that shows $1000 and it opens two lines that make up the $1000. On this screen, however, I see only the dimensions/fields I have loaded: entity, account, account Description, quantity. I won't see Dept because I do not have it as I'm not loading it. I know that I can include Dept in the Format of import as an attribute and click the amount to show attributes but is it possible to have it on the screen? In other words, I want to make in the field but I don't want to load on the target system so it shows up on the drill through the screen?
  
  Sincerest apologies if I do a bad job to articulate the question.

  Hello

  Unfortunately there is no way to change the design that you see during the Drillback.

  The displayed dimensions are controlled by the dimensions which are loaded into the target system. Given that the target system does not these dimensions, it is not displayed when drillback.

  Thank you

• I don't see the status bar at the bottom of the screen. How can I get that back?

  Something has changed. The status bar disappeared. The only way I seem to be able to leave Firefox is to close.

  First of all, you can check that Firefox is not in his view full screen where the Windows task bar is hidden. The F11 key toggles between the normal modes and full screen.

  If Firefox hides the taskbar of Windows in normal mode, a file that stores the dimensions of Windows Firefox may be damaged. If you are not able to resize the window manually, you can delete this file for Firefox back to its original size.

  To try to manually resize:

  Press Alt + space to display the system menu of the Firefox window, and then click the size (or press S) and press the arrow down once, then the arrow upwards once. This will usually move the bottom of the Firefox window to the visible area of the screen. If it is not visible, try pressing the arrow upwards several times, or for a while. To complete the editing of size, press ENTER.

  If the window is maximized, then size is grayed out. This is normal, and this method won't help.

  To delete the settings file:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  You can activate missing bars (menus, toolbar bookmarks bar) using the list on the toolbar, which you can view by using one of the following:

  • Right-click on a zone empty of the tab bar, or click the "+" button on the tab bar
  • Press the Alt key to activate the classic menu bar, and then view > toolbars
  • on the Customize tab, use the button "show/hide Toolbar" (controls, buttons, and Toolbars Customize Firefox)

  Any improvement?

• Firefox 29 'Customize Page' does not fit on the screen.

  Nothing is displayed on the right side of the Page customize. At least 20% of the page is missing. Tried to change the size of zoom and the police.

  It seems that the entire contents of the Firefox window does not fit on your screen.

  What are the dimensions of your screen?

  You can set the layout.css.devPixelsPerPx pref on the topic: config page on 1.0 or Windows 8 to 1.25 and if necessary adjust layout.css.devPixelsPerPx from 1.0 to 0.1 or 0.05 steps (1.1 or 0.9) do the icons to display properly.

  • http://KB.mozillazine.org/about:config

  See also:

  • https://support.Mozilla.org/KB/Forum-response-zoom-feature-on-Firefox-22

  An extension allows you to adjust the size of the text in the user interface and zoom the page in the browser window.

  You can watch this extension to adjust the font size for the user interface.

  • Theme font & size changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  You can watch the Default FullZoom Level or NoScript extension if the web pages need to be adjusted after the change of layout.css.devPixelsPerPx.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• How are checks on the screen?

  Hello

  I want to add on the screen controls to custom FCP generators and effects. How are controls in movement on the screen?

  Thank you

  Ivan

  Basically, you need to use those already provided in motion (unless you can program the FxPlug plugins).

  You'll find commands to the screen in several filters. The most common is Poke (in the set of filters of distortion.) However, * any * filter CSOS have to publish in its parameter list can be used and there are several different types. ('Exotic' favourites are blur > blur Gradient, tile > Kaleidotile and aesthetic > extrusion.)

  Create a new top-level group - rename CSO (or CSO if you have more than one). In the Group Inspector (you * must *) set a fixed resolution 2D. (Otherwise will be very unexpected effects.)

  The group selected, add filters > distortion > Poke.

  In the Inspector of Poke, find and check CSOS to publish.

  Note: the group still has a length of 0 images. You can in properties > calendar > and set the time to the length of your project (or more) or more simply, just add a shape: rectangle, circle, what is practical and then put it in the wide (or turn off the group so it does not appear). The group will have its length defined for the duration of the project (if your preferences > project > create a new layer at the beginning of the project is on or your playhead is 0.) Onscreen controls appear only in FCPX to the number of frames including the object/group parent in the timeline panel. Simply adding a filter does not add an object and filters have no length if there is nothing to act accordingly.

  Add behaviors to link to the X and the parameters Y of your object under control. (You need add separate links to individual settings, because there is a mismatch of types of settings.)

  In Wells of the behaviour Source object, add the group to the OSC. For the Source parameter in the compatible settings drop-down list, select Filters.Poke.Center.X and Y respectively.  Your object will move to the upper right corner of the canvas. At the bottom of each link behavior Inspector, there is an Offset value. Define each of these to-0.5 (which resets the object in the middle of the canvas.)

  Your object will now be controllable in FCPX with the control on the screen.

  You know how application relates to several destinations resolution and how it applies to what you were doing just a little.

  Motion (very skillfully I must add) treated all resolutions screens as having the coordinates of 0 and 1 (inclusive). No matter what draft resolution you have, SD, HD, 4 K, etc... Controls of the OSC are considered as having the same dimensions. Real pixel values are calculated from the screen resolutions for horizontal and vertical to the destination video (project) dimensions. [Fixed resolution dimensions help you determine the proportions in FCPX, but according to me, are automatically set to adapt to the target FCPX project when it is applied.] Maybe it's not always true, and if you make adjustments, then you essentially override this behavior in your specific model project. See below.]

  In the middle of the canvas to an object, as a form, etc., is (0,0), but for a CSO is 0.5, 0.5. When you create a relationship between an object and the parameters on-screen control center, you're "setting" the Center in a different coordinate system. Compensation for these values to the negative terminal of the Center value resets the position to the original 'normal '.

  Whatever he says, you can actually fool onscreen controls by setting a custom 'resolution' of the group you places in the dimensions of fixed resolution (say: 300x500pixels). So if you want to create something like a "HUD" to appear in FCPX and have the only control flow within its limits and control another object on the screen, which can be done (using the behaviors of clamp to restrict the Center.X and the Center.Y to between 0 and 1 and the OSC will remain within the limits of the resolution group fixed dimensions you set).  If you don't 'get' this still, forget about it then for now, it is not so important and has nothing to do with what you were asking. [In the case of a "HUD" type configuration, you can create another group with other CSO to control the placement of objects on the screen HUD Group, and everything in this group would be sent as CSOS, including the CSOS of the object of HUD designed... get some practice with CSO, then venture into complicated. You are only limited by what you can put together with what you have available in motion if you do not program such things at the level of the application/plugin. [Here is an example of this type of control project - it's very simple and used to define the background color: https://www.youtube.com/watch?v=jpIxuuZuko8 - it has been designed to be taken apart and studied.]

  If you build a model with CSO and the OSC does not appear in FCPX: return in movement and check that his group has length (Timing) and make sure that you have checked the box publish CSOS (and that the effect is selected in the Inspector of FCPX - click the title bar of effect).

  On the resolution fixed. Motion, by default, the account of dynamic groups - they grow and to shrink to just be the bounding box of all that they contain. By setting the fixed resolution, you force Motion to limit the group size to what you have defined. When control of the center of CSOS goes beyond the limits of a dynamic group, it acts as a multiplier of positional - and your purpose (most of the time immediately) disappears very quickly off the screen. If your initial group of the OSC has no physical object in it, it's dynamic ratings are 0 x 0 and * any * movement of the control on the screen increases by whole numbers for each pixel, it moves. If you move the OSC 1/2 pixel in any direction, the object's Center is already aligned with the edge of the canvas.

  If you have any questions, do not hesitate to ask. This topic may be a little hard to grasp until you actually out by yourself and see it in action.

• HDMI output on Qosmio G40 - horizontal line on the screen

  I connect my Qosmio G40 to an 46F86BDX of Samsung LCD via HDMI. On all my films, when there is a shift, I see a horizontal line on the screen. Sometimes is in the middle of the screen, sometimes lower.

  I tried my pc with another TV and a different cable, but the same problem. Someone knows the same thing?

  Thanx

  Hello

  > On all my films, when there is a shift, I see a horizontal line on the screen.

  If I understand issue you this horizontal line appears ONLY on and external TV and ONLY if there is some faster movements of the pic.

  If so, then I think it has nothing to do with G40 Notepad.
  I have read that those issues could be related to the new TVs LCD then to watch movies in high definition.

  I think you should read a few tests and reports on similar issues on LCD TVs

  See you soon

• Air bubble in the screen X 61 LCD Tablet

  My X 61 Tablet is currently guaranteed but I have repeatedly rejected by links of 'technical' Lenovo declaring that it is hours billable damage caused by the user. Apparently, I've been asked too much pressure on the LCD screen bringing packed - several times.

  Here is the chronology of events that shows the incompetence of their so-called engineering team.

  -Online all about end of August 2009, I see a bubble of surfacing of behind the bezel 2 "the edge at the bottom left of the screen

  -Online I follow the routine to open a ticket, got a box, copy and backup data, box / send the machine and prepare weeks of lost productivity without a laptop

  => After nearly two weeks, I have received communication about the bubble and am told immediately that the fix would be chargeable (about $700) to replace the LCD screen if I chose to move forward

  => I have request an escalation and a more accurate report of what they thought the problem was. That whiles away several days and I get a picture of their repair center
  IMAGE: http://ivywood.org/Pics/Misc/lenovo/19241050.gif

  =>, They put a sticker next to the bubble and asserted that he was a crack due to pressure on the LCD screen. "Even the slightest pressure can sometimes cause a crack to appear. Never mind the fact that a Tablet is intended to be used with a pen that [U] must somehow make contact with the LCD screen! [/U]. I also explained that the laptop has not been used with a pen for a long time, so even question of the application of pressure.

  -Online three weeks after the debacle, I get another say there is has nothing that Lenovo will do since it is a damage caused by the user. I really wanted to know how this was determined so I started to probe further. Now the explanations get really outrageous.

  "Lenovo: a crack on an LCD screen, it's like a windshield of a car." It can grow over time. »

  Note that a crack in a window without deriving a few inches over time. It can grow but it does not move

  "Lenovo: Mr President, our technical department is the last word on this issue and they have determined that it is a chargeable repair.

  At this point, I'm getting argumentative and challenge the jurisdiction of the people doing this diagnostic.

  "Lenovo: If you think that we made a mistake, you are free to go to a small claims court." Is there anything else we can help you? »

  Way to go from Lenovo. Home customer service is the best

  Fast forward to two months and November 5, 2009, yet another bubble starts appearing behind the bezel from exactly the right lower corner. Once more, in this case off no provocation whatsoever. First of all, I see a tiny line on the edge as I work that develops slowly in a semicircle.

  IMAGE: http://ivywood.org/Pics/Misc/lenovo/DSC_7168.jpg

  This time I wanted to make sure that the movement of the bubble is saved so I took another photo a day later

  http://ivywood.org/pics/Misc/Lenovo/DSC_7170.jpg

  =>, I opened a ticket and get the first support call normal. Ask them to refer to the post previous DNHDGY8 before that I take on the hassle of being without a machine an indefinite period of time.

  => It goes without saying that I got the same answer that once more, I put too much pressure somewhere.

  [QOUTE] We are unable to determine what caused the damage, but once it's here, and our team determines it is damageed we can do a chargeable repair. We cannot determine which determined what caused the damage, because we weren't there when it happened [/QOUTE]

  No matter how many bubbles appear from nowhere or no reason, is somehow my fault. I suggest that it clearly resembles a problem in the manufacturing sector. However, incompetent repair team has the last word, so I don't know how it can never be described as a matter of generation. It almost seems that these game acclaimed experts are required to report issues that they do not understand as a customer mishandling.

  Now, I'm not saying this is a matter of MFG. without reason. If you notice, the lower right corner of the screen on a X 61 becomes very hot. The LCD itself is composed of several layers and bound with the edges open to the air. Continuous heating and cooling mastic can deteriorate over time. If even a specification of air is trapped in this phase, for example between the glass and the polarizing film, what happens during the next heating cycle? The bubble grow first and because of the pressure variation, try to move away from the heat source, raising.

  That's what I could deduce so far. One thing any technician silent willl confirm is that it is surely not a crack!

  LAST UPDATED NOVEMBER 6, 2009
  I was struck once more, but I kept the open ticket so we will see how this past time. It is not a question for $700, but more info on write off a problem with misdiagnosis and inadequate technical reasoning. It is almost about to be fraudulent.

  I guess that many have faced this problem had not said anything. Hope this helps someone. I'll update here as this case unfolds.