Disconnect the Touch: mouseEnabled

Similar Questions

• How can S2340T, I turn off the touch function?

  I am running the S2340T monitor on a Windows Pro 8.1 System.  Touch calibration occasionally goes haywire, but I've always been able to open the tool pen and Touch and recalibrate.  Except that now, it doesn't seem to be "holding".

  As I rarely use the tactile aspect of the screen and am completely comfortable with my trackball mouse, I would just turn the tactile aspect * off *.

  How can I do this?  I know that you go to the Device Manager, but how to know what 'Human Interface' element it is?  I'm a gamer, so I have a * lot * of human interface elements.

  Thank you!

  Disconnect the monitor cable computer USB upstream will turn off the monitor to "touch" feature This means that you will not be able to use one of the USB ports monitor downstream.

• I use the touch screen of Windows 8, and after that I use it, my mouse pointer disappears

  My problem is similar to other positions, but not exact.

  When I use the touch screen of my computer in windows 8, the mouse disappears and does not come up until I restart the computer.  After the restart, if I use the touch screen, even once, the needle does not again.

  Hi Tony,.

  This problem is caused due to conflicts of device, you will not be able to use the touch cursor when a mouse is connected. You will be able to tap on the touch keyboard, but when you scroll or drag the mouse cursor disappears. I suggest you to disable one of the device and check if it helps.

  To disable the touch screen, refer to the following steps:

  a. click the Start button and click Control Panel.

  b. access the material and audio.

  c. click Pen and Touch.

  d. click on the contact tab.

  (e) uncheck the box use the finder as input, this disables touch and stylus.

  Otherwise, you will need to disconnect the mouse.

  Please reply with the status of the issue so that we can better help you.

• My iMac that is hot to the touch - 66 C Core - too hot?

  Hi all

  My iMac 24 "2009 mid (El Capitan, 16 GB of RAM) works quite warm to the touch.  According to an application of diagnostic on the local market, the core of Northbridge is at 66 C.  Is it OK?

  Thank you very much

  S

  Hello, you probably have dust in your fans. If your iMac cool can´t, himself and the temperature is rising. Or I guess that your dough processor colling has not changed. First chcek with activity monitor, if isn´t there is an app that have heavy load on your processor and if so, remove it. If not, there will probably be problem of dust and fans or with colling stick on your processor.

• Can I turn off the TOUCH screen feature?

  Here's my problem: my granddaughter for baby love watching YouTube nursery rhymes on my iPhone before the NAP. But sometimes it naturally touches the screen, which stops the video.

  Is there a way to disable the TOUCH screen of the iPhone function while keeping the video running?

  Thank you!!!

  Hi, Edward

  Yes - you can see that guided access (for example: "Ignore all keys") meets your needs:

  http://help.Apple.com/iPhone/9/#/iph7fad0d10

• Jack was very warm when you disconnect the plug iPhone

  When my iPhone 6 supported this morning, I noticed the plug that goes into the wall was pretty hot when I disconnected the unit from the wall.  I never noticed this before.  Is it a bad sign and is it safe to use?

  On the phone under 80% charge when you unplugged? If Yes, the cube would be hot, because the phone draws more power for the first 80% of the load, it then tapers. If you have any doubts bring it to an Apple store for the assessment.

• Disable the touch screen scrolling

  I found a ton of results describing how to force Firefox to scroll as a touchscreen. Let me start by being clear: I want to do the opposite of this. I have a page that key scrolls correctly, but this causes problems.

  I use a web page that submits electronic contracts, and they require signatures; I access this page from a Dell XPS 18 tablet. The problem is that the signature field is extremely temperamental. If you try to connect, the page scrolls, and the signature field remains empty. If you type just as it should be and then start to sign later, you can select the field, and it works. The problem is that it is so capricious, it took me several minutes to get the idea of the right button/timing of the thing. This does not work for clients. If I plug a conventional mouse, it works as it should; Click and drag the points highlights text, rather than scrolling and click and drag in the signature box signs.

  I use Firefox for this task because of its high degree of customization; I could (pretty simple) to make everything display exactly as I wanted. On that note, I hope that there is a way to disable the touch scrolling. I tried to use the clamp and slide the module to subvert its own destination, but it does not seem an option to do this. If someone can point me in the direction of a parameter or add-on that can do this, I'll be very grateful. Ideally, I would like to disable on this page in particular only, but disable overall would be as well.

  Since the submission of my original post, I spent a lot of time delving into everything: config with nothing else than an incomplete article knowledge base to guide me, and after losing a ton of time to play with the mousewheel settings, I discovered gestures.enable_single_finger_input, set it to false and voila! Problem solved. If there is never anyone trying to accomplish this for a reason, I hope that you find it useful.

• Firefox works with the touch screen technology windows 8?

  Plan to buy all-in-one touch screen pc and want to know if Firefox browser works well with this technology.

  Yes it is on the right. as the article linked in my response earlier said that the touch interface is currently available in early development builds, which are mainly for the developers and users very advanced and not recommended for daily use. Firefox 26 will come on the aurora in mid channel one to beat late October - these build would give you the opportunity to test and to discover the new format in a more stable form (provided that the calendar holds).

  https://www.Mozilla.org/Firefox/channel/

• Laptop: the touch screen on my laptop does not work

  The touch screen on my computer portable organizers can't work, what can I do?

  Bill

  Hey,.

  The most common issue with touch screens, it's often people think they have a touch screen when their computer actually did not come with one.  (Seriously!)  If you have a touch screen, go here for simple touchscreen, troubleshooting steps: http://support.hp.com/us-en/document/c03488148

  -wes

• How to temporarily disable the touch screen in Windows 8? TouchSmart 320-1122la

  TouchSmart 320-1122la

  64 bit of Windows 8

  This solution does not work for me because I don't have the option "Use your finger as input device."

  Go to the sounds and then hardware and Control Panel.

  Select the Pen and Touch and go to the contact tab.

  At the top is "Use your finger as input device."  Uncheck the box.

  Click apply and then click OK.

  Is there another solution?

  Thanks in advance.

  Hi, I have a HP TouchSmart 320-1030, so it can work on your TouchSmart:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

  ~ Lil Liebe

  I'm not an employee of HP; I just want to help.

  Click the White Star of Kudos to say thank you *.

  By clicking 'Accept as Solution' on an answer that solves your problem makes it easier for others to find solutions.

• monitor 23tm: where can I buy a usb cable for the touch screen of hp 23tm?

  This USB cable allows to use the touch screen functions. Anyone know where I can buy a replacement?

  @oneextremehiker, welcome to the forum.

  You should do HP Partsurfer one test to see that HP is available.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• How to make it turn off the touch screen?

  I don't want to use the touch screen. How to turn off the it? It is activated by all sorts of things, like my touch cat's tail, or an insect landing on it, or a curtain blowing against it. I don't type using the screen, I prefer the keyboard that I can not type quickly on the screen. I would like to turn off the touch screen when I use it not (most of the time), or even permanently - it is not useful for what I want to do that the screen is not as sensitive or as fast as the input devices that I usually use.

  Hi, I have a HP TouchSmart 320-1030, so it can work on your touch screen:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

• Portege M930 - entry of the finger on the touch screen no longer works

  Got one of these

  https://www.MyToshiba.com.au/products/computers/Tablet/M930/pdw04a-00c001/specifications

  Is no longer able to use the entrance of finger on the touch screen.
  Pen works on touch screen OK.

  It's like if I had accidentally disbled it somehow.

  Cannot find any reference to a key or switch to toggle finger on the touch screen to enter the manual in pdf or google.

  Does anyone know how to re activate the finger of entry for the touch screen on a toshiba portege Tablet M930?

  Hello

  The fingertouch can be disabled.
  Go to the control panel? Pen & touch

  in the Pen and Touch Settings window, click on the contact tab
  Check or uncheck the checkbox next to your finger as input device
  Click on apply and then OK

• Portege M400 - where to find the touch screen XP driver

  Hello, I was wondering where I could find the touch screen for my Portege M400-S5032 pilots.
  I looked on the site Toshiba driver but could not find them.

  Thanks in advance for your help,
  Carbira1

  Hi mate

  Take a look at the Toshiba driver page we
  [Drivers Portege M400-S5032 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1598633& rpn = PPM40U & modelFilter = M400-S5032 & SelCategorie = 2756709 & selFamily = 1073768662]

  There you should find the Wacom Dual Touch driver for Windows Vista/XP
  I think it's a good thing.

• How to disable the touch screen on the Qosmio DX730?

  I want to use the calibrators of color such as colourmunki for my graphic work. These must place me something on the screen.

  How can I temporarily disable the touch screen while I do this?

  I tried Control Panel and manual with no luck.
  Thanks for any help

  Hello

  Have you found a way to do it?
  I think that it of not possible to disable the touch screen.
  Found no information in the user manual. Maybe you can check the BIOS settings available. Switch on and press F2 to enter the BIOS.
  But to be honest, I doubt that a power option would be available there.