Similar Questions

• Discover images not displayed in design

  I inserted a series of images in my page, but only some of them appear in design view. After downloading on the site, they appear in Chrome and Firefox and also on the iPad, but not in Internet Explorer (IE8).

  When I first inserted them, they were all very well, but who need to make a few changes, the problems started.

  All files are stored in the same folder and I checked the code and they all look correct. I tried to re - inserted by using the Insert command, dragging from the list of files (I get a text link to the file) and always using the "point to the file" method but the same files appears. I just get a grey picture placeholder.

  The page is: selection of card Christmas 2015 and I apologize for the content because it's still July.

  You need convert CMYK to RGB images. That could help. In addition, listen to others on the size of the file. You need not large files for your Web site. If you want people to be able to be used in a higher resolution, you can link them from the smaller files.

  Jim

• .gif picture not appearing is not in the design Panel

  I have an image .gif not appearing is not in the design Panel, but it appears in the browser preview.
  
  < div id = "footerPanvalid" >
  < image src = "images/valid-xhtml10 - blue.gif" alt = "Valid XHTML 1.0" Strict height = "31" width = "88" / >
  < / div >
  
  {#footerPanvalid}
  position: relative;
  right: 200px;
  padding-left: 300px;
  z index: 23;
  }
  
  valid-xhtml10 - blue.gif appears also in the active panel
  
  Any ideas what going on?

  Put a border around #footerPanvalid to make sure that you can see in
  The design view.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "nikos_golf" wrote in message
  News:fclmk4$39d$1@forums. Macromedia.com...
  > I have an image .gif not appearing is not in the design Panel, but it appears in the
  > Overview of the browser.
  >
  >

  
  >
  >
  
  >
  > #footerPanvalid {}
  > position: relative;
  > right: 200px;
  > padding-left: 300px;
  > z index: 23;
  > }
  >
  > valid-xhtml10 - blue.gif appears also in the active panel
  >
  > Any ideas whats going on?
  >

• "WARNING: Images not within the site"

  "WARNING: Images not within the site"

  (Dreamweaver 8 - Mac)

  I am trying to download my first site, but I get the warning above when I try.  My images ARE in the 'root' folder in a file named "images".  AND in my finder, they are all fine.  And when I load in a browser to test the site everything works fine.

  During my construction, I imported images in my site from another file outside my "root folder" and Dreamweaver automatically copied them more in my "pictures" folder in my "root folder".

  Because Dreamweaver copied the images automatically, I deleted the original with the image file.

  Can anyone offer an explanation and a solution?

  Check your site definition. You can set a folder of images by default wrong with an absolute path.

  Mylenium

• Problem with .gif images not in the process of disappearance

  Hi-

  I'm fairly new to photoshop. Lately I've been messing around with editing and gifs and have been sporadic success achieve what I decided to do. I'm looking for help with a peculiar problem which seems to appear again and again. The problem is that when I try to make GIFs. with a transparent background, gif images don't disappear properly once the file is moved out of photoshop.

  For example: I came across the following .gif yesterday and decided I want to try to edit for a surreal effect.

  http://imgur.com/NJlpA.gif (I hope this link works)

  I wanted to trim the beginning of animation where the man is on the bike and make sure the man just rolls backward on the ground (weird I know).

  I deleted the images I successfully is most wanted and reproduces images of animation that I wanted to play again so that the image would loop seamlessly. I then went through image by image and corresponding layer by layer, to remove the white background. I used the quickwand tool. It took a lot of time, but the gif was playing in photoshop that I wanted, a man back writhing on the ground for no apparent reason. Siiiiiiick.

  So I have everything save for web thing and devices, saved as a .gif file, and then I put it on the interwebs and it turns out that I have created this monstrosity:

  http://imgur.com/60CHc.gif

  Please, please, please, someone tell what I'm doing wrong. I feel like I got the exact procedure even other gifs and had them turn out perfectly. What Miss me?  Please note that the problem is not that I did accidentally layers active for executives, so that I did not want their assets. I checked.

  OK, thanks in advance to anyone who might be able to offer advice.

  Sean

  Each image is defined as "don't throw"... which means that it will keep this visible frame throughout the animation.

  Select all the images in the Animation Panel and then right click on any change of setting this option.

• How to fix Images not in the root of the Site?

  I have a new site in Dreamweaver and the index.htm page is in the site, but the associated files (images, css files) are not in the "root of the site. It works fine on my local machine, but when I synchronize the files with the remote site these files only be synchronized.
  
  How can I put the image files in the root of the site while having Dreamweaver 'fix' the paths to these files? I'd do this manually, but there are a lot of files.
  
  Thank you!

  > How can I get the image files in the root of the site while having
  > Dreamweaver 'fix' the paths to these files? I did this manually
  > but there is a lot of files.

  Are all or most of these files in a single folder?
  Then go into your hard drive and copy/move the files locally
  The site folder. Then perform a check of link or a search/replace to correct paths.

  When done - to double check a find in source to file:///
  There should be no absolute path local file:///

  --
  Alan
  Adobe Community Expert, dreamweaver

  http://www.Adobe.com/communities/experts/

• Image not in the elements at the launch of the LR5

  I run under subscription of the photographer with cc LR5 and Photoshop 2014 on a Windows 8.1 platform. All software are up to date. When I Photo > edit in > PS 12 items, items lance, a TIFF copy is made and is filed in the LR5, but the photo is not in the elements for editing. Size is not a problem. I tried a small picture of a few mpx.

  It must be PhotoshopElementsEditor.exe

• How can I put bleeds for individual images (not for the entire document)?

  Hello everyone,

  I have a ready brochure for printing and now I had information on some images ago 3 mm lack of bleed. How can I fix this? The entire document should be set to this purge, but they always tell me that, in some places (images), he is still missing.

  Thank you much in advance.

  You must bring your images for objects that purge leave the allocation of purge and make sure that the image is big enough to fill this area.

  

• Aligning images not in the table

  This is a very basic problem, and still I can't understand why I can't get the images to the corner line in http://www.Hancher.uiowa.edu/test/2014_newyears_thankyou.html . As you can see, there is a gap under each photo. I cut the HTML skeleton to try to understand what causes the problem, but even the bone bare, he persists.

  Could some kind soul out there take a look at my code and let me know if they see a mistake?

  Thank you!

  Add this in your css...

  IMG {}

  Display: block;

  }

  EDIT: for the addition of css it is because under the html5 doctype, inline images get a small amount of padding added to 'text descenders' (a space for tiny legs, letters like 'g' or 'y').

  Add display: block turns your image from inline to block, remove the default browser inline padding.

• Add ons page is displayed in html, broken images, not including the menu bar on the left. How can I fix it?

  Previously, I was getting "download error" while trying to install add ons, after having reinstalled the add ons page now appears in HTML with broken images but the navagation bar (Add-ons, Extensions, Plugins etc) is still usable. What should I do?

  Thank you

  Ray

  Reload the Web page while bypassing the cache using one of the following steps:

  • Hold down the SHIFT key and click the reload with a left click button.

  OR

  • Press Ctrl + F5 or Ctrl + SHIFT + R (Windows and Linux)
  • Press command + SHIFT + R (Mac)

  Let us know if this solves the problems you are having.

• Why did corrector duplicate the whole image (not only the place chosen by opton + click) and then by dragging the IMAGE WHOLE whole when the cursor is moved as if the two are connected by magnet?

  -Reset the tool does nothing.

  -Use of MacBook Pro with OS X 10.8.5

  Open window > Clone Source and clipping to check and see if it's better.

  

• Duplicate images that appear in folders bearing the name of file to a format like: Picon.rlf 2, 44-33. They are JPEG files and no more than 10 KB

  Original title: duplicate images on file

  In the photo and Documents folders, duplicate pictures are appearing with the filename of a format like: Picon. RFL 2, 44-33. They are JPEG files and no more than 10 KB

  What are these files?

  My first thought would be a kind of thumbnails, but I checked the settings file and folder and it is on do not show hidden files / folders or operating system files.

  Ideas of what they are and what they could be removed would beappreciated.

  Thank you very much

  Ruudi

  Mystery solved:

  http://h30434.www3.HP.com/T5/Home-Web-printing/thumbnails-appearing-in-folders-Picon-RLF-x-XXX-XX-jpg/m-p/916859#M4714

  Thank you

  Ruudi

• The drive letter for the files on my external drive does not match the designated letter MyWindowsApp, after briefly changing pots

  On my Windows 7 laptop, I briefly moved an external hard drive to a USB port to another and then back.

  The reader is referred to as F, as it was originally, but since the temporary move the path for some files now show that E.

  I went to disk management and confirmed that the drive is detected as F.

  This disrupts programs such as Adobe Premiere Elements. It always hurts new information loaded in the disc I load that is in F, but the said path E. The file is clearly on record.

  Hello

  I see that, after changing the port, the drive letter for the external drive has changed. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  You can follow these steps to assign a letter to the external drive and check if that helps.

  1 - click on 'Start' button.

  2-right-click on "Computer" in the list that appears.

  Option 3 - Select the 'manage '. If a warning appears asking for your permission to continue, click on the OK"" button.

  4 - Choose "Disk management" in the left column of the computer management window. Find the USB in the list that appears in the gray bottom of the center column.

  5-click right on the part of the screen that represents the USB key, and then click the option "letter of change of road and railways.

  6 button - click on the 'change' in the window that opens.

  7. ensure that the radio button to "assign the following drive letter:" is selected. To the right of the present is a drop-down list with the drive letters currently not assigned to all of the drives on your local system. If you are not on a network, choose the drive letter you want for your USB key and then click on the OK"" button.

  8 - click on the 'yes' button in the confirmation box that appears.

  Refer.

  Change, add, or remove a drive letter: http://windows.microsoft.com/en-US/windows7/Change-add-or-remove-a-drive-letter

  I hope this helps.

• Do not include the design of DND.

  If DND settings are disabled by disabling "Manual" then why are all other options (Silence, etc.) always switchable page? Surely, this implies that they are still doing something?

  The reason why I ask is that my 5 c iPhone does not ring sometimes and I can't work out why. Would it be when it is locked / call one repeated etc.?

  My switch is on the side, and the manual is on 'off '.

  Thank you

  James Harries wrote:

  If DND settings are disabled by disabling "Manual" then why are all other options (Silence, etc.) always switchable page? Surely, this implies that they are still doing something?

  Yes, they are doing something. If you select manual, all alerts are silenced until that you turn it off. Other parameters allow you to program the DND and select repeated so calls but DND must still be activated so that the calls repeated work.

• Could not load the design mode

  Hello

  I just installed Flash Builder 4.6 trial (Windows). When I create a new Flex Mobile project (target any platforms), this is what I get when I try to open the main view MXML:

  

  I tried to increase the memory in FlashBuilder.ini but nothing changes. It is not a problem with my computer, it is very good and it works correctly with previous versions.

  All advice?

  Thank you.

  Resolved to reinstall Flash Builder.