Discs lost with ElCapitan

Similar Questions

• No recovery disc supplied with my Satellite P300

  I recently bought a new laptop from Toshiba, Satellite P300. It has Vista installed out of the box, but there is no recovery media supplied with the package. I'm afraid that if something can go wrong in the future, I will not be able to repair my operating system.

  Two questions:
  (1) is this normal that there is no restore disk provided with the Satellite P300? In other words, other customers who bought the same laptop doesn't have that either. Or is it an exception and an error in my local provider. In the manual on the "included in this package" list is any mention of a recovery disc supplied with the package.

  (2) can I get a Toshiba Recovery disk if something is wrong?

  Hello

  > Is it normal that there is no restore disk provided with the Satellite P300?
  Yes, because the laptop was equipped with HARD drive recovery option that allows to recover the laptop from the HARD drive.

  > Can I get a Toshiba Recovery disk if something is wrong?
  There are some pre-installed Toshiba Recovery disc creator software.
  This software creates a Toshiba Recovery DVD. I think that this info was published in the user manual which must be preinstalled on your laptop.

  So, I strongly recommend reading the user manual and to create this DVD of recovery before you change anything on the laptop.

  Cheers mate

• discs made with WIndows XP, but none does not work with Windows Vista

  I have many discs made with windows XP and now none will work with windows VISTA, does anyone have an idea, I tried for weeks now, alll over the internet, but nothing, can someone help, because I need these files on CD RE-WRITER and RE-ENGRAVER of DVD discs.

  Hello

  ·         You get the error message?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you run the Microsoft Fixit tool from this link and if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2:

  Follow the steps in troubleshooting this article and check if that helps:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

• We have 4 CS3 design facilities std and 3 sets of CS3 and a connector series CS4. The downgrade (d) CS3 serial was lost with the crash of the PC on which it was installed. How to receive a new donwgraded CS4 CS3 serial?

  We have 4 CS3 design facilities std and 3 sets of CS3 and a connector series CS4. The downgrade (d) CS3 serial was lost with the crash of the PC on which it was installed. How to receive a new donwgraded CS4 CS3 serial?

  The PC is an installation of Windows 7 Professional 64 b NL.

  Hi,

  The downgrade isn't possible for customers Volume of the former traditional products... license for individual buyers.

  Kind regards

  Sheena

• How to create the default recovery disc factory with OneKey Recovery 4.0

  I have a K430 and before I use it (as with any machine, I bought) I wanted to make my recovery disks.

  Throughout this site there are guides to do this with version 7, but this desktop computer has version 4.0 of OKR

  I can record an image of my partition system but need the ability to install on a clean hard disk in case of hard drive failure.

  I have checked the forums and Kb and been through programs of Windows 8, but nothing shows me the right way.

  This is compounded by the fact that none of my imaging tools drive as the drive Seagate, which was delivered in this machine (Ghost4Linux, CloneZilla, Acronis Migrate Easy)

  Where is my option create said support?

  Just to close this one.

  I talked to the customer on the phone this post having remained unanswered,

  There is no recovery disc to buy or to create for this machine, should so hard drive failure you need to source your own discs.

  This machine will be returned now, a lost for the sake of a DVD sale.

  I must say the guy who talked on the phone was really helpful and courteous, unfortunately hampered by the policy of the company.

• Disc lost for Age of Empires 3

  I bought legally your game, Age of Empires Gold Edition 3, about a year ago. I sincerely enjoyed until The Warchiefs expansion disc was lost in a recent move. Is there a way I can download the files needed to install it?

  Thank you

  Your best option would be to communicate directly with the site of the game.

  http://www.Microsoft.com/games/riseofnations/

  The only available option, I am aware, is to buy another copy. I'm not a representative or employee of Microsoft. The game is reasonably priced at around $30.

• HP Officejet 6500 wireless all: CD software disc supplied with my printer

  There was a CD that came with my printer. It contained software that I could use to copy and make pdf files and some other items. I moved and lost the CD and recently had to reformat my PC. I would like to be able to download the same info CD or buy the disc. Any solution please?

  Las Vegas, Bigjohn701

  Hello

  What is the product/model of your HP Officejet 6500 (E709 something). You can go on its support site to download the software and driver. The CD can be already updated. The following link is for a model/product E709a:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=au&LC=en&product=3795314

  Kind regards.

• Disc lost for photoshop and elements

  I lost my disc for photoshop version 9 and the elements version 9, I have my serial number. I just need to know can I download it and not have to buy it again?

  If you follow the 7 steps, you can download the files of the trial here: http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

  then activate it with your serial number.

• Early 2011 MBP 15 "dual SSD - lost with boot camp edition

  Hello community!

  I lost my mind with boot camp troubleshooting during the last week. This is going to be confused reading, but I'm afraid I got worse... So please try to face me.

  Starting point - of course I can install Windows 10 on my MBP 2011 early!

  Material

  Early 2011 MBP 15 "with Intel HD 3000 and AMD Radeon HD 6750M

  and the optical drive, replaced by an other SSD with a caddy

  Of course, I didn't have an optical drive on the spot so I realized that I need to install to get the option to boot from USB - I did find. I managed to make a bootable USB from. ISO with UNETBOOTIN. First of all, I got score of huge problems with that I finally managed to Dodge with diskpart - software on Windows Installer USB after NVRAM reset before each attempt to install with CMD + Option + P + R, I had to also remove the OSX SSD during the installation of VICTORY for everything the world some boring as Windows could not update the configuration to start the computer. Unable to continue installation -problem.

  After all:

  -> I managed to install WIN10 on my MBP education

  -> A lot of festivities fun! < 3

  -> After installing the bootcamp drivers all active windows went to "invisible desktop on the left" (I closed the other workstations...) where I managed to lift one of the windows on the central office with lucky and "move" action (I have no idea...)

  -> after reboot apparently drivers Intel HD 3000 went haywire and I got black screen on black with details in black (black screen Uni)

  Conclusion: I try Windows 8.1 (pro) because at least he is supported by my Mac AND it has same installation and should work.

  At one point I tried to use my old drive via USB to install Windows 7 and 8.1 pro

  -> PROBLEM CDBOOT: couldn't find the BOOTMGR

  -> I moved along back USB and WIN8.1

  8.1 Windows Pro was installed easily, with the same procedure. When running boot camp display drivers turns black during the "Intel - graphic" installation period. I can confirmed that starting mode safe mode when the screen works, but I can't install Catalyst drivers-> so I can not play games that was the only reason for dual boot. In addition, there is no sound. So lack of drivers: no picture, no sound.

  There... I think I forgot to say something. I was hoping just that if someone could help me with this problem. I lose my head here. I have not really direction where to go next, but I have a few options I can try after that I understand my morale of my troops.

  1. Remove my boot OS X SSD, switch my SSD Windows instead of him and put my Superdrive. So I would basically just install windows. Earlier, I had 8 windows work via the DVD and bootcamp.
  2. Try to play with the drivers on Win8.1 more
  3. Reinstall windows. There may be something wrong with my. ISO or USB?
  4. Delete the EFI to correct CDBOOT?

  Thank you in advance!

  You must use Bootcamp Assistant for everything, including the form/partitioning implementation and the removal of partitions...

  I would like to reformat the second SSD (on which should be installed W10) with diskUtility. Then start bootcampassistant on SSD1 and do all this.

• How to find boxes to the letters I've lost with El Capitan update?

  I recently updated my iMac to El Capitan. After the update, I've lost all my mailboxes that were related to my ISP account. Is it possible to recover these lost go to balls (they are still in my ISP account)? If so, how should I do this?

  In addition, I can't create a new mailboxes that are related to my ISP. When I try to create a new mailbox, I can only choose "on my Mac" in the menu dropdown.

  Help, please.

  Very easy if you have been a backup with Time Machine. Just restore the mailbox in Time Machine.

• Lost with upgrade to El Capitan photos

  I upgraded to El Capitan and moved photos to iphoto to Photos and lots of photos were lost.  I have photos on an external hard drive.

  Is it possible to take pictures in iphoto and copy them on dropbox and stop using iphoto?  I'm tired of the problems with El Capitan / iphoto / Photos and iCloud

  Is it possible to take pictures in iphoto and copy them on dropbox and stop using iphoto?

  Of course, just select all and use the Export command on the file menu to export to the Dropbox folder.

  Then, remove the photo library and stop using the Photos.

• HP Photosmart C4580: disc lost installation for HP Photosmart C4580

  Hello

  My apologies if I am asking about a problem solved a million times before, but I'm a newbie here and have tried and tried to google the answer...

  I got my C4580 for several years and has struggled to implement the wireless have been use it via the USB port.  But now, I need to move my printer and would like to use wireless.  But I lost the installation disc.  Because I use a Mac I can not find via download installation disk because Apple is apparently SO smart it does everything what in the background.

  I can't have parameters to configure my wireless network, and it makes me a little crazy.  When I go the HP on the Mac utility, it says "this printer is already implemented".

  Someone knows how to change the wireless set up on a Mac?

  Thanks in advance for any help.

  H

  Welcome to the community of HP @hkmarlborough,

  I appreciate that you try to set up your HP Photosmart C4580 as a wireless printer. I'll be happy to help you.

  Below, I've posted a link to a document that provides information on how to configure the printer for a wireless network. When you open the link, scroll down to the section called 'OS X v10.8 Mountain Lion and OS X v10.9 Mavericks' (should work for OS x 10.11).

  Set up your printer for a wireless network for the printer HP Photosmart C4380-C4500 all-in-one series

  Let me know if you are able to get the printer put in place for the wireless, or if you have other questions.

• Lost HP LaserJet 1100 disc lost for the printer and the need to re - install urgent! the printer

  I have a HP LaserJet printer and have lost the disc. I need to reinstall the printer so I can print the document again and I also tried the installation procedure. Help

  Hello

  You can download the software here...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=UK&prodNameId=14925&prodTypeId=18972&prodSeriesId=25470&swLang=8&TaskID=135&swEnvOID=228

  Tricky

• How to make a windows own 10, upgrade disc lost

  I have a aspire 8920g which has been pre-installed with windows Vista. I received a free upgrade disk windows 7 now I lost several years ago. I've recently upgraded to w10 and my product has a "right of digital. Since I now feel that all these improvements influenced my computers portable performace Im interested in doing a clean w10 to install. everything takes on how to approach it? I need the product key or it will still give me the right "digital." If I need the key, how do I to get it back?

  If you already have 10 windows updated and your copy is authenticated, a digital key is stored on Microsoft servers, so you just need to re - install windows 10, ignore demand for key stages of product during installation and then connected to the Internet to have authenticated it.

  nothing else.

  http://community.Acer.com/T5/knowledge-base/Windows-10-installation-recovery-media-creation-and-use/...

• I have a legitimate Windows XP disk, but it has not all the Service Packs. Is there a way to make another disc bootable with all three of service packs?

  I need a Windows XP bootdisk with all service packs. I have a drive (bought) under license or legitimate only it doesn't have any service pack on this disc. I downloaded all three service packs, but how do I make a Windows XP bootable disk with all three service pack on the drive also? BTW; I have Windows XP, Vista and Windows 7 partitioned on my main computer with boots double.

  The process is called "slipstreaming".  There are a number of Web sites with detailed directions.  Here are a few: http://tinyurl.com/3t3epzn

  Personally, I have had success using nLite.  Others swear by Autostreamer.  Or you can do it manually.

  There is some confusion about the "Gold" XP update (with no service pack) to SP3.  If you have installed XP Gold and you want to update your existing installation, you must update to sp1, 1A, or 2 before upgrading to sp3 again.

  For this reason, some people suggest a slipstreamed sp1a or sp2 using your CD-ROM CD but XP and then to a sp3 CD based on one that you just created.

  However, a lot of sites claim to have created a CD of sp3 XP slipstreamed successfully from a CD of XP Gold (which is what you seem to have).  See http://www.theeldergeek.com/slipstreamed_xpsp3_cd.htm