disorder affecting the values in the table according to cfscript

Similar Questions

• set the height of the rows in the table according to the integer value

  Hello.
  
  jdev version - 11.1.2.3
  
  My requiremnt is that I have an integer input value, when I provide a value for it assumes that 10, then only 10 lines should be visible on the rest of the table should come when scroll us. Basically, I want to adjust the height of the lines on the change in value of my entry value providied.
  
  Thank you

  If the counter returns a number, you can convert entire

  public void button(ActionEvent actionEvent) {
  Number n = spinbox.getvalue();
  table.setFetchSize(n.intValue());
  }
  

  Timo

• Programmatically control the value in the table according to two attributes

  I have a query with Table Panel, built from a display object. I want to include a column in the table whose value is based on the value of the two attributes, say Attribute1 and attribut2. Basically something like:
  
  If attribute1 == 'Y' and attribut2 == 'Y': display "One"
  If attribute1 == 'Y' and attribut2! = 'Y': show "Two"
  If attribute1! = 'Y' and attribut2 == 'Y': "Three" display
  If attribute1! = 'Y' and attribut2! = 'Y': show "four."
  
  Is this possible? I use JDeveloper 11.1.1.5.0

  You can use a transitional attribute using groovy to do the math:
  http://docs.Oracle.com/CD/E26098_01/Web.1112/e16182/bcentities.htm#BABHGCAH

• How to pass data to the tables according to the value of the first 4 digits of 7 strings of numbers

  I want to sort incoming data, in several bays based only on the first 4 digits of each string.

  For example, a hexadecimal string may be 41322033333533 which is A1 3353.

  A1 is a sensor. particularly, and I want to send all data from the A1 to a table. I have 8 sensors data and want to send the data to separate the bays of sensor. My sensor names are A1, A2, A3, T1, T2, T3, W1

  I will use a structure of the matter, for loop and a comparison of '=' for the data. However, I want to only compare the first 4 digits of the string and I can't find an operator for this. Any advice on how to proceed would be appreciated.

  With a thread like this

  

• Disorder affecting the State of session of a select element.

  Hello
  
  I have a requirement in which I need to change the State of an item in the list of selection session in my form without having to submit. I use the Application Express 4.1.0.00.32. I thought it would be right by using a dynamic action front or the javascript and the call to an application process on for example.
  
  P1_MY_SELECT onchange = "set_option (); »
  
  set_option() {} function
  var l_option = $('P1_MY_SELECT') f_SelectValue;
  Alert ("is my new value" + l_option);
  
  UPON REQUEST, set the new session state
  var lRequest = new apex.ajax.ondemand
  ('SET_P1_MY_SELECT', function)
  {/ * Start the return function * /}
  L_S var = p.readyState;
  If (l_s == 1 |) L_S == 2 | L_S IS 3)
  {}
  Another yew (l_s is 4)
  {gReturn = p.responseText;}
  (gReturn)? json_SetItems (gReturn): null;
  }
  else {return false ;}
  / * put an end to the return function * /.
  }
  );
  lRequest.ajax.addParam ('x 01', l_option);
  lRequest._get)
  
  };
  
  My application process on request
  
  DECLARE
  l_options varchar2 (2000): = wwv_flow.g_x01;
  BEGIN
  APEX_UTIL. SET_SESSION_STATE ('P1_MY_SELECT', l_options);
  apex_util.json_from_items ('P1_MY_SELECT');
  END;
  
  Is there a better method to set the session to the State of my other P1_MY_SELECT than I do as above, or you can tell me why P1_MY_SELECT session state is not changed?
  
  Thank you.
  
  Published by: 968358 on November 1, 2012 08:40

  If you are in 4.1 Why don't you use a dynamic action instead of writing the code again?

  create a dynamic action like this

  Event: Change
  Type of source: Agenda
  Point: P1_MY_SELECT

  Real Action:
  =========
  Action: Run of the Plsql Code
  Plsql Code: null;
  Items to submit page: P1_MY_SELECT
  Page referred to return: P1_MY_SELECT (this is optional)

  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21674/advnc_dynamic_actions.htm#HTMDB27020

• Disable an entry to build the table according to the user input

  Hello

  I'm using labview to perform a mass spectrometer.  I made a program to monitor up to five masses, where it sends mass to mass spec (DAC) and then receives data (analog signal) and the locations / records, it is then repeated for the next four masses before returning to the first.

  I have five controls on the front panel, where the user can enter and then the five masses that they wish to follow.

  My problem is how to disable some of the masses, if I only want to follow masses 1,2,3 or 4 instead of five.  Because obviously, it takes more time to complete each cycle with the masses more.  How can I disable the entries if the user upgrades to zero for example?  Or have a way to control the masses to follow.  Who will stop the five tensions sent through DAC and send only 1,2,3 or 4 depending on what is selected?

  I enclose my vi.

  I don't see a Structure of the event in your vi. It is the best and easiest way to capture the change event and manipulate. Search Help on the Structures of the event and you will find many examples. You need the full version of LabView to have access to the Structure of the event.

• disorder affecting the disc scratch in illustrator cc

  can someone help me understand this? using mac os

  I need to change my scratch disk from the system 'default' on an external drive.

  In Preferences > scratch disks

  He sees the hard drive, which I joined... so I choose that, I click ok and get the usual warning to have to restart illustator to implement the change.

  problem is that when I quit, and then restart illustrator, no dice. It is set by default to "system".

  I change again. Click ok.

  then, just to see, I re - open the preferences panel. He went back to the "system".

  What gives?

  I tried several times and it won't take.

  Help?

  You can try updating your operating system. We just tried here with 10.8 and it works very well.

• How to set the default value of the component selectOneChoice in the table to the ADF

  Hi all

  I use jdev 11.1.1.6.0 version.

  I used an adf table in which an attribute is selectOnceChoice.

  To create the table and selectOneChoice I used the data control java bean.

  and drag and drop a table and after that I have drag and drop one of the attributes as selectonechoice and linked with the return of the method list as < key, value > pair.

  I want the default value to select only one option in each attribute rows.

  I checked with simillar issue on post next, but not yet resolved.

  My jspx code is

  
  <af:column id="c11"
                                           headerText="Invoice To" >
                                      <af:outputText value="#{row.invoiceTo}" id="ot19"/>
  <af:selectOneChoice value="#{bindings.invoiceTo.inputValue}"
                                                      label="#{bindings.invoiceTo.label}"
                                                      required="#{bindings.invoiceTo.hints.mandatory}"
                                                      shortDesc="#{bindings.invoiceTo.hints.tooltip}"
                                                      id="soc3"
                                                      autoSubmit="true"
                                                      valuePassThru="true">
                                    <f:selectItems value="#{bindings.invoiceTo.items}"
                                                   id="si4"/>
                                  </af:selectOneChoice>
  </af:column>
  
  
  

  where invoiceTo is the table attribute and the invoiceTo attribute is dragged and dropped as a SOC function list Source data mapped data value with the List attribute

  and the display attribute

  Data value = invoiceTo List = lovMasterKey attribute

  Display attribute = lovMasterValue

  that list is maintained at < lovMasterKey, lovMasterValue >

  According to the value of invoiceTo line, it should show as default value is selectOneChoice, but its showing no not as a default value.

  Please, help me how set the default value of selectOneChoice in the table according to each value line invoiceTo.

  Thank you all for the help on this issue.

  Problem has been resolved.

  Reason for this was used

  It is solved using code used for the list built for selectoneChoice more

    List lovMasterList = new ArrayList();
  
  SelectItem siItem = new SelectItem();                      
  
  siItem.setLabel(objAfCmnLovMasterListVO1.getLovMasterValue());
  
  siItem.setValue(objAfCmnLovMasterListVO1.getLovMasterKey());
  
    lovMasterList.add(siItem);
  

  Now, I used the code where the line below. InvoiceTo is the key and row.invoiceToItems are the list of articles for selectOneChoice.

  Thank you very much...

• The table display looks faded

  I use a table on the façade as an indicator to display rows of data periodically on average.

  The color table is washed out and I can't change them.  I don't speak of cells; I mean the line bar and scroll border.

  There must be a way to get a table to display them with decent contrast.

  Any ideas.

  Post your real VI and not just a partial screenshot that does not look as if it were even a part of LabVIEW.

  How did you create this?  Is it possible that you have changed some colors of fonts within the façade?  Anything you might have done in the Windows system settings?

  In fact, I think you just need to check the properties of the table, according to me, it looks like you have set it to disabled and Greyed.

• Add the new column to the desired location in the table through customization?

  Hello world

  I made a few standard on oaf page customizations.
  I added 2 new columns to the existing table, but they were added at the end of the table.
  But I want a column to be the first and a column in the middle of the table.

  How can I achieve this?

  Please give me your valuable suggestions...

  Thank you.

  Hello

  Customize page, there is another icon for just before reorganization create icon.

  You can use and organize all the elements in the region of the table according to your requirement.

  Sushant-

• The structure of the table of contents get won't suffer if the structure of output file is changed?

  I used FlashHelp to generate output for a project so the output folder has a structure, now while deploying the server if I make changes in the structure of output file/folder it will affect the "table of contents" or any other characteristic.

  Also, while deploying the o/p in files on the server what needs to be done so that the new custom skin (which i using flash) appears to the help pages for my request, as I call the o/p my request htm files directly by using a script.

  I hope that the explanation I posted is understandable.

  Hi kiki_04 and welcome to the HR community.

  The output of your project files cannot be moved or renamed without breaking the links throughout your project. Any changes made to folders or files MUST be made inside your RoboHelp project. It is best to think of your output in a single file, even if it is not. In other words, your output may be moved between places in its entirety

  In regards to your new skin, it must be imported into your RoboHelp project and specified within your layout of the FlashHelp single source.

• How to set the value of a column in a table according to another column?

  Hello world!
  
  I use Apex 4.1.
  My question is how can I set the value of a column in a table according to another column?
  I have a table and when I insert the value in the column content, I want to change this value in the note column with the note, which is generated with pl/sql function (function of string returned if the typed value is in the range).
  
  I tried to use javascript as

   $('input[name=f02]').live('change', function(){
  if($(this).val()!='1'){
  $('input[name=f03]').val("test")}
  }); 

  for the development of the column note to test if the value typed in the content of the column is not 1, but this code assigns the value to all the lines and I need to set only the specified line.
  
  Can someone give me a hint in any way to do this if possible?
  
  Kind regards
  drama9346

  You will need create a process on your page type PLSQL and develop this process "we demand" of the page. In this process, you can run the PLSQL you need. That is to say to retrieve the note value as described in your PC:

  and when I insert the value in the column content, I want to change this value in the note column with the note, which is generated with pl/sql function (function of string returned if the typed value is in the range).

  In this process, you must provide a return value of the call, and you can do this by using htp.p. Example:

  DECLARE
     --putting x01 in a var to simplify
     l_test_var VARCHAR2(200) := apex_application.g_x01;
     l_return VARCHAR2(200);
  BEGIN
     -- a simplistic test
     IF LENGTH(l_test_var) BETWEEN 10 AND 20 THEN
        l_return := 'String is between 10 and 20';
     END IF;
  
     --this will write l_return to the buffer, and the ajax callback will receive this
     htp.p(l_return);
  END;
  

  And the code that I wrote above, which is javascript, would need to go where your current code is that binds to the onchange event. The result should be that, when a change is made to this element, an ajax request is made on the server. When the call is finished, it will be the value returned in the item you want.

• read the values of an array element and by sending a digital output to a designated channel according to the value read from the table

  Hello world

  could someone help me before I get out of my hair. Here's my problem.

  I read 3 values of an array of 3 elements i.e. 1,2,3. These values are then compared to a constant value, example if the first element of the array is 1 and it meets the comparison condition can send a digital camera of output for that channel on data acquisition

  I want to be able to send a value from a table to its corresponding comparison and then on its designated channel on the acquisition of data, the whole point of this is due to the fact the table element will not always read the value 1,2,3 for example could be 2,3,1

  Here's one the vi I have so far

  If someone could help it would be much appreciated

  all the best

  brand

  Take time to explore the many examples included with LabVIEW that cover the basics.

  -Indexing table

  -reading a spreadsheet file

• How to export data from the table with the colouring of cells according to value.

  Hi all

  I use jdeveloper 11.1.1.6

  I want to export data from the table with a lot of formatting. as for color cells based on value and so much. How to do this?

  You can find us apache POI-http://poi.apache.org/

  See this http://www.techartifact.com/blogs/2013/08/generate-excel-file-in-oracle-adf-using-apache-poi.html

• 'For' loop with a different number of iterations. Second, the auto-indexation of the tables with different sizes is done. It can affect the performance of the Vi?

  Hello

  I have a loop 'for' which can take different number of iterations according to the number of measures that the user wants to do.

  Inside this loop, I'm auto-indexation four different 1 d arrays. This means that the size of the tables will be different in the different phases of the execution of the program (the size will equal the number of measures).

  My question is: the auto-indexation of the tables with different sizes will affect the performance of the program? I think it slows down my Vi...

  Thank you very much.

  My first thought is that the compiler to the LabVIEW actually removes the Matlab node because the outputs are not used.  Once you son upward, LabVIEW must then call Matlab and wait for it to run.  I know from experience, the call of Matlab to run the script is SLOW.  I also recommend to do the math in native LabVIEW.