display and earphone key

Hi, I'm doing an example application where when I click on the "N" key the next image appears and when I click on the button 'P' the previous image is redisplayed. I want to display 10 photos. I tried using the KeypadListener interface, but it does not work for me. Is this the right method? Can you advice what the best way is to click on a key and display an image? Thanks DK

I guess you have debugged it and proved that the code that you expect to be executed is?

In any case, you must indicate the screen needed to repaint the Bitmap image.  Not tested but I think after

bitmapFieldabc.setBitmap (abcBitmap);

You should be able to simply

bitmapFieldabc.invlidate ();

or maybe invalidate() screen.

In addition, a late welcome, sorry didn't know it was your first post!

Tags: BlackBerry Developers

Similar Questions

  • Display and earphone jack

    Hi guys!

    I ve just got my Zip and it s still lighter than I thought!

    I have two questiones considered:

    1. I noticed as two vertical bars in the main menu. I don't know if it's a visual effect or a fault...

    2. I have to much effort for the plug-in headphones until I hear the 'click '. Is this ok?

    Thank you!

    Nguyen says:

    OK, doesn´t of the mine have the line down the Middle, I see only two "bars" in the two sides as I ve marked with the red rectangle.

    Those who are ok or is it a DEFECT?

    Thanks again.

    You mean that areas of contrast more dark behind the arrows?  It's normal.  Mine did the same thing in English.  I thought you meant lines on the screen.

    The screen is not exactly good at CZ, it fits best.  It's good for the text, all the rest, it is so-so at best.  Nothing wrong with your device but if you are talking about the darker bars.

  • I don't know how i ' v, but I lost the toolbars at the top and bottom. [Alt] will not bring up the toolbar and scroll keys do not work. How can I fix it?

    I managed to hide the toolbars, ALL of them. [Alt] brings to the top of the toolbar so that I can change them. In addition, the [previous page] [next page], [home] and [end] keys do not work.

    You can have:

    1. Choose the Mode "full screen" or
    2. unchecked toolbars

    The F11 key activates / turns off Mode full screen or not. Full screen, you have no toolbars, no tab and no bar Add on (bottom).

    If unchecked you your toolbars (checked = displayed; UN - check = not displayed), and then do one of the following, then click on those you want to check/uncheck:

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • I'm having a problem with my F9 AND F10 KEYS TO CONTROL sound

    I think my f9 and f10 keys do not work properly...

    Ok. I found where the problem was. In fact, the letter O must be the number 0.

    Please do the following procedure.

    Uninstall the current driver for IDT audio.

    Resources:
    Uninstall software in Windows 7

    Uninstall or change a program in Windows 7

    Download and install the latest IDT audio driver for your model here.

    Restart the system.

    Uninstall the driver for the HP Quick Launch software (if it is installed in the system).

    Resources:
    Uninstall software in Windows 7

    Uninstall or change a program in Windows 7

    Download and install the latest driver software HP Quick Launch for your model here.

    Restart the system.

    Download and install the latest version of HP utility to display here.

    Restart the system and check the results.

  • Every time using the ', it displays "and «»

    original title: why is my ' button always keep changing?

    A simple problem I guess, but as a writer, it is very annoying.  Whenever I'm trying to use the ', it displays "and" "when I hold down the SHIFT key.  I have to delete the extra apostrophe to an apostrophe.  How can I change, so it's a single apostrophe instead of quotes at all times.  I played with the language toolbar and every time I spend in the US instead of US International, it fixes the problem... only temporarily.  How can I make it permanent?  Thanks for the help in advance.

    Hi Spundae,

    Welcome to the Microsoft Community and thanks for posting the question.

    According to the description, it looks like a character is typed when you use a single apostrophe.

    I have a link that should guide you in the right direction.

    Visit the link and indicate "the keys do not collide correctly" and "the wrong characters are typed.

    http://support.Microsoft.com/kb/258826

    Keep us updated on the status of the issue. For any help about Windows, you can still post on the Microsoft Community.

  • LOV query is not valid, a display and a return value is necessary, column n

    Hello

    I AM FACING
    LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, 
the first FROM clause in the SQL statement must not belong to the in-line query.
    with two table, I create lov

    the tables are
    CREATE TABLE  "CRM_SALES_DEPARTMENT" 
   (     "DEPT_ID" NUMBER NOT NULL ENABLE, 
     "CUSTOMER_ID" NUMBER NOT NULL ENABLE, 
     "DEPT_CODE" VARCHAR2(50) NOT NULL ENABLE, 
      CONSTRAINT "CRM_SALES_DEPARTMENT_PK" PRIMARY KEY ("DEPT_ID") ENABLE
   )
    CREATE TABLE  "CRM_SALES_CUSTOMERS" 
   (     "ID" NUMBER, 
     "CUSTOMER_NAME" VARCHAR2(255), 
     "CUSTOMER_ADDRESS1" VARCHAR2(255), 
      PRIMARY KEY ("ID") ENABLE
   )
    I USE QUARY
    select (SELECT CS.CUSTOMER_NAME FROM CRM_SALES_CUSTOMERS CS WHERE CS.ID=SD.CUSTOMER_ID) AD D, SD.CUSTOMER_ID R  
from CRM_SALES_DEPARTMENT SD where SD.DEPT_CODE=:P16_MARKET
    But who show me LOV query is not valid, a display and a return value is needed, the column names must be
    different. If your query contains a query online, the first CLAUSE in the SQL statement must not belong to the query online.

    How to solve this problem.

    Thank you

    Published by: 805629 on January 10, 2011 03:46

    Published by: 805629 on January 10, 2011 03:58

    Published by: 805629 on January 10, 2011 03:59

    ¿AD?
    Select (SELECTION of CS. CLIENT_NAME CS CRM_SALES_CUSTOMERS WHERE CS.ID = SD. CUSTOMER_ID) AD D, SD. CUSTOMER_ID R
    CRM_SALES_DEPARTMENT SD where SD DEPT_CODE =: P16_MARKET

    But the correct way is a join outher

    select CS.CUSTOMER_NAME D, SD.CUSTOMER_ID R
from CRM_SALES_CUSTOMERS CS,
        CRM_SALES_DEPARTMENT SD
where SD.DEPT_CODE=:P16_MARKET
And CS.ID(+)=SD.CUSTOMER_ID

  • resolution retina MacBook display and external

    I have a MacBook to the retina 12 inches early 2015 with a multiport Apple USB - C card that has a HDMI connector. I am using a monitor Dell 27 ' u2713hm with a HDMI cable. However, the display preferences do not allow me to set the resolution. I have the choice between the default value for display (and this is 1080 px, even if the screen has a native resolution of 2560 x 1440) and update the scale that offers a resolution of 1080 or lower. How to use my monitor at its full resolution with HDMI connector I have on the multiport card?

    Thanks for your help

    Samuel

    As far as I know, the U2713HM Dell only supports 1920x1080@60Hz via its HDMI port.

    http://superuser.com/questions/606946/does-the-Dell-u2713h-support-2560-x-1440-o worm-hdmi - 60 fps

  • When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

    When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

    Command-r does not work on a 10.6.8 system, you would need 10.7 Lion or better to do. If you try to install a new system and that you have already downloaded, then go to your Applications folder and double-click "install OS X...". »

  • I spilled juice on my keyboard and some keys don't work, how can I make it work? :/

    I need help, I spelt juice on my keyboard and some keys do not work. How can I solve this problem? I tried to remove one of the main, but it has messed up it more, I NEED HELP. Please, I beg you! Tell me a solution how to fix this please!

    Replace the keyboard.

  • Firefox bookmarks bar does not allow me to drag-and - drop Web site icons. I went into the display and click on "bookmarks bar".

    Firefox bookmarks bar does not allow me to drag-and - drop Web site icons. I went into the display and click on "bookmarks bar". bookmarks bar but her but its not allowing me to drag and drop the icon on the toolbar. I tried everything it is supposed to do, but his does not work. his frustration.

    Stef. /. \

    Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible.

    • View > toolbars
    • Right click on empty toolbar space

    Use the toolbar (Customize) to open the Customize and set the toolbar to display items.

    • Make sure the "bookmarks toolbar items" are on the personal bar
    • If "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the palette of the toolbar in the window the bookmarks toolbar Customize
    • If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar
    • If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration

    You can check the problems caused by a corrupt localstore.rdf file if the above didn't help.

  • I need to create public and private keys for the security certificate and I can not find the certificate. Where is he?

    I bought a security certificate, and the site tells me that it has been installed successfully. I need to export the certificate so that I can create public and private keys, but I can't find the certificate to do so.

    Firefox (Firefox Orange) > Options > Options > advanced > Certificates > authorities > export

  • Tab and control keys do not work in Firefox (they work in other browsers) AND I went to a new keyboard.

    Tab and control keys do not work the browser Firefox (my browser is up-to-date). The buttons work in IE and Chrome, however, until I realized that, I even changed my keyboard for a brand new, hoping that would solve the problem.

    Hello arlusk, the problem is probably an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

    (If you use it, switch to the default theme).

    • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

    Once you get the pop-up, simply select "" boot mode safe. "

    If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. It might help others who have the same problem.

    Thank you.

  • Random HTTPS of image not displaying and be abandoned

    This is a file that includes pictures posted on my site:

    https://polishwords.com.pl/dev/testAbort2.php

    They are provided by HTTP and they work well.

    But in this file:

    https://polishwords.com.pl/dev/testAbort.php

    But I show the same images over HTTPS not HTTP and every time I refresh the page (CTRL + F5) one, at random, pictures is not displayed and in console network red poster with information: abandoned.

    I've tried it in Chrome, Internet Explorer, and Opera, and everything is ok. Only in the latest Firefox.
    I tried with deleted complete privacy, restarted several times updated FF, disabled addons, extensions disabled and it's the same thing. Another person who also has FF me reported the same situation.

    In my server log, it looks like this:

    Bad load:

    [22/Mar / 2013:23:29:11 + 0100] "GET /images/mukonczeniestudiow.jpg HTTP/1.1" 200 6705 "-" "Mozilla/5.0 (Windows NT 6.1;". (RV:19.0) gecko/20100101 Firefox/19.0 "

    Good load:

    [22/Mar / 2013:23:30:41 + 0100] "GET /images/mukonczeniestudiow.jpg HTTP/1.1" 200 6907 "https://polishwords.com.pl/dev/testAbort.php""Mozilla/5.0 (Windows NT 6.1; (RV:19.0) gecko/20100101 Firefox/19.0 "

    What is the cause of this behavior?

    Hi tomaszs, based on your journal, your Web server is receiving and responding to the request, but the small size of the response suggests that there is some sort of glitch. Can you spot any model it?

    Unfortunately, I'm no expert on web servers and I find encrypted traffic very stimulating to see - using a debugging proxy can work around the problem that you are trying to diagnose by managing connections differently.

    It is without doubt a documentation on when Firefox give up the demand for a particular item.

  • Whenever I start Firefox, my home page is displayed, and then another tab of a page I looked at in the past. I don't know how to do stop loading up this extra page on start up. Suggestions? Thank you!

    Whenever I start Firefox, my home page is displayed, and then another tab of a page I looked at in the past. I don't know how to do stop to load to the top of this additional page at startup and can't seem to find information on how to disable this junk page. Any suggestions? Thank you!!

    Maybe you inadvertently set both pages to be your Homepage"(s)"?

    See How to set the home page

  • Satellite M70 - 181 - slider and escape key does not

    FN with F10 keys shows no reaction.
    Check all the drivers.
    But cursor and escape keys does not.
    Need help please

    Joe

    As far as I know, FN + F10 or FN + F11 active integrated keyboard and cursor control keys.

    Satellite M70 is a fairly old machine and I do not remember which driver may be responsible for this control. Try to reinstall the Toshiba Accessibility or FN-esse utility. Maybe this will help.

    I had M70 long ago, but I've never used this option.

Maybe you are looking for