Display Audio waveforms in the timeline, first Pro CC

Similar Questions

• You can "zoom in" the audio waveform in the timeline?

  Impossible to find a solution to help or the FAQS, so I'll post my first question here :-)

  I want to zoom in vertically on the audio waveform in the timeline panel. My situation is that I have an audio mix 24-bit of a concert of classical music with a fairly large dynamic range, is very strong and very quiet bits bits in a single audio file. I don't see enough detail of waveform in the quiet parts, even when I enlarge the track vertically. I did not find a formal way to zoom in, at least in the timeline panel. The display of the audio waveform only in the monitor source offers a vertical zoom.

  Official aid offers only this:

  "To see more volume when viewing an audio waveform in the timeline, increase the height of the track."

  That seems to imply that "Zoom" in additional to get really quiet parts is not a feature.

  I found a bit of a workaround, which is to adjust the gain of the video - audio waveform as a result changes. However, I prefer not to change the volume whenever I need a different vertical zoom on the waveform.

  Thank you

  3 P

  No, you cannot zoom in analogues in the source monitor.

  Will be a feature request good however.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• is there a way to NEST or MERGE videos and keep the audio waveform in the timeline?

  Hi guys,.

  I was struggling with solutions for my workflow.

  I do a lot a microphone on a single video track changes. Then when I want to apply and modify the presets, I must apply the effects on all the small changes (sometimes 100 edits in a 3 minute clip).

  So I learned about fusion - but the merger does not allow you to modify the effects in the batch. So in the above example, if I want to make a change in an effect in a merged item, I have to hold single OPTION click on all editions of 100 and then adjust the effects.

  Then I bent over the NESTING. It works pretty well because it transforms all 100 mounts in 1 clip and I can't batch "edict", which means that I can change the effects on all editions of 100 at a time (because it's now 1 clip on the timeline). "

  However, the problem I have now nesting is... get rid of the file audio waveform in the timeline panel. So now, it is difficult to edit audio.

  Is there a way to merge, merge or nest together to make 1 clip (like nesting) and also to keep the audio waveform on the chronology of the changes?

  Kind regards

  Try the sequence > rendered audio and see if you get a waveform.

• I don't see the Audio waveform in the timeline panel. No triangle click button. Just changed pcf. Help!

  I don't see the Audio waveform in the timeline panel. No triangle click button. Just changed pcf. Help!

  I solved the problem.  It was just a matter of push lines down and creating a larger space of work for each row of the audio.  Never had this problem at the time of AVID or FCP.  I appreciate your help!

• How to turn an audio waveform in the timeline in first Pro CC

  I don't know why I don't get a clear answer to this question, but can someone help me here? In the first CS6, all I had to do was press the small arrow next to my calendar, and I could see the audio waveform. The arrow is no longer in CC and I can't figure out how else to do this to put on. I use this function constantly, so it's pretty annoying don't not to have it on.

  Scroll the mouse wheel while now the pointer on the header of the track.

• How can I get the audio waveform in the timeline back?

  Hi all!

  Please excuse my - more preparation possible spelling and grammar beforehand.

  Since a few days, I have this problem: the chronology of the first Pro CC will not display the audio waveform of the audio that I use, doesn't matter if it's a music video... It shows just one simple line, as if it was the silence:

  

  I wait until the project is fully charged and he never shows up.

  I used to sync the camera with the audio own audio using the waveform as a guide and even if this isn't the only way, it the easiest for me.

  I downloaded the latest version, hoping that this problem would be solved (or that some configuration I may accidentally changed it, might be reset) and keeps the thing that happens. Maybe it's something simple, an option, I could not find, but it's there (I hope!).

  Can someone help me?

  Thank you!

  Check the icon key and in the right click menu options.

• where are the names of audio clips in the timeline (first CC)?

  How can I display the names of the audio clips in timelint inside the first CC?

  In the timeline panel, select the timeline (wrench) display settings > display the names of Audio.

• Is it possible to see an audio waveform in the timeline, but not to hear during playback?

  I try to sync the audio on an older version, so it would be nice to just hear the news, but also see the old waveform...

  Try this. Duplicate your old audio layer then add effect > Audio > stereo bet a copy and check the box that says invert phase. This will cause the audio cancel it's self out completely.

  I didn't think that the waveform would disappear when you turn off the audio. Answered by my phone initially so I didn't check, but it works:

  

• AE CC: Audio waveform on the timeline is cut in half

  I was looking at tutorials CS6 and when I look at after effects CC, the waveforms are cut in half makes it harder to find the time to a song. If anyone knows a solution, please tell me!

  It's a different way, and in my opinion, once you get used to watching, a rectified waveform is a better way to use a waveform as a guide for editing.

  In the Assembly, then to the right window the model name, you will see three small lines. Click here and uncheck rectified waveforms.

• Don't see a video or audio waveform in the timeline. As you can see I've selected these options. TY!

  

  Expand the audio track until it appears.

• How to display the name of audio clip in the timeline?

  How to display the name of audio clip in the timeline?  I can see the label for video clips in the timeline, and when I hover over audio clip [I see the label, but otherwise, not l; abels show in audio editing.

  Hi denniscallan,

  Audio Clip names are disabled by default in first Pro CC. Turn it on go to the timeline (wrench) display settings in the timeline panel and choose Show names of Audio.

  Hope that helps,

  Kevin

  

• Why you won't see names of audio clip in the timeline in CC?

  It's very frustrating, so I hope there is a solution. I have to be able to read the names of the audio files in the timeline... especially music videos. Why they would remove this feature? Is it possible to get it back? And while I'm at it, why now you expand the timeline tracks to be able to read the names of the tracks? (I have all my track of the label names, but obviously don't want that any enlargement just to be able to read what I wrote every track... it would be a cot in a timeline stir since I was a minimum of 10 audio tracks at all times!)

  Thanks for any help on this! I just spent to v.8 CC yesterday and am working on all the kinks.

  Hit the key in the timeline panel and check the names of Audio.

• How to switch to the display of the audio waveform in the source Panel

  I use 8.1.0 (81) first Pro CC 20141 on a PC.

  I am a tutorial on Lynda.com and the version used in the video is not quite as up-to-date as mine.

  They recommend clicking on the list of options in the tab of the Panel from the Source to switch to more specifically audio waveform display Insert and to the point-based dialogue in the audio.

  Problem is, the list of options on the Panel of my Source does not include something audio waveform.

  Am I missing something? They did it move? Or maybe I have the wrong tool selected (is that a context menu which changes according to what the tool is selected?)?

  Two other options:

  -Right-click in the Source monitor, select view > Audio Waveform

  -In the Source monitor, click the settings... key icon (on the bottom right) and choose the Audio waveform.

• What's UP with the audio tracks on the timeline?

  I'm faithful user of Final Cut Pro, but I had to order a Windows compatible software for video editing for work, so I'm Adobe Premiere CS4 (I couldn't download CS5 on my computer because it's apparently a system of 32 bytes, not a 64... go figure). And I add the titles to the audio section of my first project and I noticed that he was going to let me NOT move my pieces anywhere I want on the timeline. He mixes them all the way up to the similar Audio track 5 automatically instead of track 1 (unlike the video that it is connected to is on track 1). I find it's confusing. I've read about it and this is apparently because the tracks automatically arrange them according to the type of audio, they are (mono, stereo, 5.1). So I thought OK, it is illogical, but I'll change them. Alas, I have not yet found a way to change the type of audio tracks to ask here. It's the first buffet. How can I change this?

  The second thing I have is that I have a mono track that only play on a player, of course. In Final Cut Pro, you have a few options to change it and it is easy. This program, I can't find a way to solve this problem either in the program itself or on the web. How can I change a mono, track to a stereo speaker, two channels of the speaker?

  Any help would be better appreciated.

  Q1: http://www.video2brain.com/en/videos-4009.htm

  Q2: I can usually hear mono files on two speakers. Maybe it's a file of two channels with only one filled channel. If so, use the effect of audio complete left or right.

  Welcome to the forum.

• Cannot delete the audio track in the timeline

  Hi all

  Here's my problem: it is not the first time it happens, but to excerpts from different cameras, I'm completely unable to abandon the audio track.
  In the source Panel the playbacks of normally with audio clips, but when it comes to insert the clip it does not work as if I'm falling all audio and video clip he simply inserts the video and if I try to drop just the audio it don't let me down anywhere.
  Has happened on multiple devices and just on the first CC (I decided to switch to CS5 and I'm already regretting)
  I tried to import the file in different ways (by drag/import/media browser), restarts first and pc and transcoding of other codecs, nothing works.

  Anyone has any suggestions or has encountered the same problem?

  
  See you soon

  A

  Hi Andrea,

  I'm completely unable to abandon the audio track.

  Try making sure that the source of A1 is connected to the A1 channel in the timeline panel, and then drag. More information: https://forums.adobe.com/thread/878527

  Thank you

  Kevin