Display of design issues

Similar Questions

• In design issue - CC will not save PDF & TIFF images are missing

  My indesign file, I've worked on over the past two months suddenly will not save the pdf out. Before this problem with the economy that happened... The last page of the circular page 8.5 x 11 20, is gray/50% the whole page in gray? And the background image that has been placed in the document and left behind an empty "images box" disappeared (or so I thought). I'm going to place the background image in once again, assuming that I deleted it. I am also having the same problem with the other images on other pages where the images have disappeared leaving behind empty boxes that may not have the images replaced them as NDS. They will not be displayed.

  I went to check the display in inDesign aka he changed the overprint preview and the "greying" box covered now all layers on this page only. How design is very organized, so everything is on layers (of exodus's images, shapes, text, background, guides). Guides have disappeared, and this gray effect (almost like when you're in illustrator and isolate a form any other work turned a shade darker) is there with once again the empty boxes without the content that I placed in them.

  I therefore decided to close the file and reopen. nothing has changed. I tried to save out as a PDF, so I can make sure that the file is safe... it out will now save all and tasks from bottom says "Impossible to export the PDF file." That's all. No other explanation.

  Does all this sound familiar to anyone? Or did happen? Help.

  Post edited by: Elisha Bencich

  UPDATE:

  I deleted a page that was giving me trouble and copy and paste new content... which seems a sort of solve the problem for now. I have to register again the whole document into a new document, I hope that works... I wish that this form could let me post a screenshot of the issue, I'm sure it would give someone a understanding of what's going on.

  See remove minor corruption by exporting

• 24 IPS monitor envy: display of 24 issues looking

  I have a monitor of the Envy 24 IPS with display problems.  It seems "cloudy" and there is a line thick pronistique coming down in the middle.  I hung it on my iPad and had the same display issues.  Factory reset already have.  Any help appreciated.  I had the monitor, less than a year and it's been great until recently.

  Good to see that you will get a replacement.

• Display card driver issue (Digital Signature of the unverified driver)

  In Device Manager, I have a question, marked by an icon of yellow exclamation next to "ATI Radeon HD 3200 Graphics" under the heading "graphics cards".  When I right click and go to properties I see the message: "Windows cannot verify the digital signature for the drivers required for this device. A recent... (Code 52) ».

  My graphics card is built into my motherboard, which is the GIGABYTE GA-MA78GM-S2H Micro ATX AMD.

  I have not install my own drivers, I let Windows 7 install drivers for me.  What do you recommend to resolve this unsigned driver issue (e.g. should I look for an ATI driver perhaps?).

  Thank you

  Hi BDub2

  Welcome to the Microsoft Answers Forum!

  We would like to know if you've made any recent software or hardware changes made to your computer.

  We receive this error if the driver has been modified. I would recommend with these methods

  Method 1:

  Uninstall and reinstall the device in Device Manager. Steps to uninstall the device:

  i. click on start, type devmgmt.msc and then on enter.

  II. Locate the display adapter device

  III. right click on the device and select uninstall

  IV. restart the computer to make the changes happen

  Uninstall and reinstall the card program and features. Steps to follow

  i. Click Start and select Control Panel

  II. in the Control Panel double-click the "Programs and features" icon

  III. here you can find all the programs and items that are installed in Windows 7.

  IV. to remove the adapter click once on the program and then click Uninstall/change, and follow the prompts.

  v. install the last driver on the manufacturer's Web site. Download the Windows 7 compatible display driver.

  Link: http://support.amd.com/us/gpudownload/Pages/index.aspx

  Method 2:

  Run a scanner online to check any malware or virus activity. Links below will help you to scan on the computer.

  http://www.Microsoft.com/Security_Essentials/

  Download

  Link for reference: what is a signed driver?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-signed-driver

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• LAN/WAN design issues: redundant network core design and equipment

  Dear all,

  I have a growing network that has inherited the reliability and scalability issues:

  (Example from my existing network)

  

  We pop connected with us through lines of CF, that LSPS are connected to our CF traverse on persistent organic pollutants.

  Now, it is necessary to make the core of switching (switch with "?" mark) redundant

  because this is the point of concentration of all connections outside.

  I got an appointment in order to study new equipment (now it's just Catalyst 3560) for this network block.

  Unfortunately, the budget is pretty low.

  I have the following considerations:

  I think that the main problem is that most of the connections is L2 trunk links and it is difficult to prevent this.

  It seems that I need to duplicate all the links to LSP FC, pop and branches (this seems doable) and rely on STP! (this seems bad)

  with all of these links.

  Currently, I have two options for the basic block:

  1. two Catalyst 3750 have duplicated links. (CSW1 LSP1, CSW2-LSP1) and rely on STP

  2. a switch Catalyst 4500 series with two redundant supervisors (probably, they allow to buy if there are strong arguments) have reproduced links and rely on STP.

  These two options do not look good because I have to rely on STP with LSP.

  I would use redundancy features and L3 protocols, but do not know how to avoid trunks

  I have no experience with the material of fantasy as a Catalyst 4500/6500 series.

  Could someone please advice me alternatives for options of design and of the hardware and confirmation or withdrawal of my options.

  Also, I would be grateful if someone could help me find strong arguments for the acquisition of Catalyst 4500 series light up the core.

  Thank you much in advance.

  Best regards

  Max

  Hi Max,.

  in the diagram and description that you provided the switch, you need to replace is a dashboard device that works only for the moment, in L2

  If you plan to go L3 communications in this device, you should review your design to the whole of the network and also review/discuss with MS how that can be converted into L3 communications

  If you want to keep the same as L2 and introduce it into the device or devices for redundancy, I'd rather have two redundant devices of a redundant chassis that I mean pair of 3750 is more reliable chassis 4500 with equipment redundant as soup, UPE however its a reliable option as well and again for sure

  If you rely on STP for redundancy, what is the problem here? It is time of convergence or what is your concern?

  hope this helps

• General design issue task flows/MVC

  Hello

  I have a general question about the design of workflow without violating the MVC pattern.

  The question is simply: can business logic goes into workflow code tasks (which means the beans in the viewController project) rather than the model project?

  I know that, to meet the logic MVC design model business should be kept in the model project (generally in the application module class) and not in the controller layer (where the TF Pond in the ADF applications). This generally provides the security and reuse for the enterprise features.

  But what happens if this logic was complicated and involves the intervention of the user? If this logic be keept in the model project but split in 'functions' more small and separately called the TF according to decisions by the user through the process? But will these "very unitary", insignificant and useless functions without the calling workflow and so hardly reusable.

  On the other hand, workflows are reusable and securable components completely independent and are designed to deal with such cases. So why can't put us the logic in any case in there?  Is always considered as a violation of the MVC design pattern in a merger of ADF application?

  To summarize, if the business logic is coded in the model layer, so the question is how to handle the case of the long process involving interactions with the user and decisions through the whole process. On the other hand, the code put this logic in the TF will solve this problem but will be a violation of MVC design model.

  Any ideas or links to this topic?

  Thank you

  Elias.

  Hello

  Yes. Still you would write them in the model layer. By writing your business logic in the model layer, you expose only the necessary things in the view layer. By that I mean is, the view / controller layer does not necessarily bother on how the business logic is in the model layer. All of this has to do is just to call the exposed API (Client Interfaces) and display the result of it.

  Now, your question to place your business logic in the view layer. Suppose that your application must support the other platform (say mobile - MAF or office - ADFdi) in the future. What would you do with business logic written in your view layer of ADF Faces? You re - write them again according to the customer? Consider this scenario and reread my previous response, which would give you a better idea.

  Arun-

• Display of design problem

  Hi all

  Hey I know that design mode is not perfect, but I use it for certain things. It works very well for what I need for up to today. I have a strange problem with a DWT FGL. I have a template and start a new page as always, and as soon as I insert html elements in a div tag, design breaks completely. The divs are all screwed up. When I delete the html code it goes back to normal.

  I thought I had fixed to re-record the TPL. It worked for a bit, but he's doing the opposite. When I delete the html code, it crashes now. I have never seen anything like this before with DW. Very strange. Thanks in advance. OH... I have not reset the preferences again, I just wanted to ask first.

  

  

  SOLVED!  Two issues here. First of all understand that something must be in the tag div, otherwise it won't appear at all and will appear broken. And second, an editable region in the DWT had no defined height still and they were so close together, it was causing problems with the FGL. Once I've set the height, she came together.

• My page is displayed in Design view, in a single column?

  In Design view, my page is displayed in a single column, all the boxes of the AP are displayed on the other. In Live View mode, the page appears correctly. Also, if I find this page with a browser, yet once, it appears correctly, what's wrong with my mode of creation? Help :-)

  (1) the design mode is often a poor representation of what your page will look like

  (2) PA divs are not how to design modern web pages

  (3) If you want more help, you must show us your site, or at least to include the code - we can only guess.

• Webfont is not correctly displayed in Design view or in the list of fonts

  Muse to update and now my topic times (Nunito) does not display correctly in design mode or on the list of fonts. It is, however, not display correctly in preview mode. When I try and delete the police, and then add it again, I get an error message that says that the police cannot be added. Any idea what's going on?

  Hello

  Please, try the following steps. I hope this will fix the problem.

  1. close the Muse

  2 rename the folders named tk1 and tk2 in the following locations

  On Windows: %appdata%\com.adobe.AdobeMuseCC.2014.2\Local store. You can type this in the path bar at the top of the Windows Explorer window

  On Mac: ~/Library/Preferences/com.adobe.AdobeMuseCC.2014.2/Local store. You can type in the dialog box go to the folder (shift-command-G)

  3. launch Muse and add the police

  Please let me know if that helps.

  Concerning

  Vivek

• Database design issues

  Y at - it a forum that deals with issues of General database design, such as the definition of primary keys, unique constraints, Check constraints, indexes, etc.?
  I searched but could not find it. Maybe I missed it. Thank you.

  General, database or SQL/PLSQL:

  http://forums.Oracle.com/forums/category.jspa?categoryID=18

• Includes do not display in Design view

  I have a html page whose content remains for the most part include pages. Mode Design DW8, these includes are not displayed. For example, a page that should have a height of 600px shows only the header and footer; It's as if understands that do not even exist. However, when I test it in the browser, everything is fine.
  
  Is there a preference or plugin setting I'm missing? Any suggestions are welcome.
  
  Thanks in advance for your time and your consideration.

  Duh! It seems to be a matter of poor markup... I had one not closedtag which was scrub place works.

  In any case, thank you.

• Images and CSS does not display in Design view

  I went from MX in DW 8 and now have this problem in Preview/design mode:
  
  Styles do not display at all. I'm a link to the CSS page, like this:
  "< LINK REL ="stylesheet"type =" text/css"href="/includes/main.css ">
  
  Images are not displayed when linking via the root directory. I am a link as follows:
  "< img src="/images/a1_banner.gif ">
  
  If I remove the first "/" (or use '... / "as appropriate), it is displayed correctly.
  
  Any thoughts... ?

  Here's what I had implemented badly.

  I had entered the URL of the website where it says "this address is used for links to the site and for the Link Checker to detect the HTTP links that send back to your own site.»

  I removed this URL and everything is now display as it should.

• Satellite Pro A10 display and DVD issues

  I have a Satellite Pro A10 about 2 1/2 years and have never had a problem with him, but the other day when I tried to watch a DVD, look at a program (InterActual Player) opened as usual and then a few more seconds later the display will change in very low resolution (something like 14 colors, almost a negative and all image was massive Although I don't remember the actual numbers) and he said that I had to reboot in order to return things to normal. I tried the same DVD in Windows Media Player, as well as to try other DVDs and initially that the DVD would play in Media Player but not Interactual but now the same thing happens any DVD or player that I use.

  Also, I went on the computer this morning and got a message saying that the battery is low (although it was because I had not plugged the computer again, nothing to do with the last errors) and the computer is in standby. I plugged in the computer and you press the power button to wake the screen is very dark but visibly pixelated (I think that's the word, he had visible points, as if someone were holding a magnifying glass up to her) and got very slowly brighter until there has been a series of narrow bright stripes, like a giant pixel or a tv test screen.
  This could be a problem with the display drivers (even though I tried to update and we found since I always see a message 'Cannot find the requested string' by the icon for display in the control panel), the screen itself, or something else entirely?

  Sorry it's so long, but I thought it is best to include all the details in case it has been important. I hope someone can help!

  Hello Nicola

  As you know on this path is not easy to say what may be the problem. In my opinion, it is important to see what is happening exactly. I assume that your problem is not caused by the display driver. Try to properly test and notice where the screen is very dark.

  If this problem is repeated again and again that I recommend you backup your data and reinstall the unit with recovery media. On this path of unity will be factory configured and you can see if the problem still occurs. If so, it may be just caused by a malfunction of the equipment.

  Good luck!

• Display Mini Mac issues

  I have a mac mini mid 2010 and everything was fine until I changed the display setting when you are connected to an HDTV. After that he changed, I could not display to come back. I went to a different view to see the desktop again to restore. Once I reconnected it the mini to HDTV, no display. I tried this with 5 monitors now and I can now is the view on a monitor with a 65 ". Is there a way for this save the display configuration and not return back when passing around monitor. The mac mini can work on all the monitor but after that pass, nothing.

  Thanks for the help!

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• Cannot be displayed in Design view - glGetProcAddress_win32 could not QML: glGenFramebuffersEXT

  Just upgraded to Windows 8.

  QNX Momentics was working fine before this, but now I can't show my QML files in Design view.

  This is the error I get.

  ! ENTRY com.rim.tad.tools.qml.simulator 1 0 13:31:50.547 2013-03-28
  ! MESSAGE C:\bbndk\ide\win32\x86\eclipse\jre\bin\java.exe - cp C:\bbndk\ide\win32\x86\eclipse\plugins\com.rim.tad.tools.qml.simulator_10.1.0.201303181949\ com.rim.tad.tools.qml.sim.check.RenderingCheck - target C:\bbndk\target_10_0_10_261\qnx6

  ! ENTRY com.rim.tad.tools.qml.simulator 4 0 13:31:51.159 2013-03-28
  ! Log MESSAGE QML Preview compatibility check.
  java.lang.IllegalStateException: glGetProcAddress_win32 failed: glGenFramebuffersEXT
  at com.rim.tad.tools.qml.sim.CsApplicationEngine.nExec (Native Method)
  at com.rim.tad.tools.qml.sim.CsApplicationEngine.execAndDestroy(CsApplicationEngine.java:45)
  at com.rim.tad.tools.qml.sim.CsApplicationEngineThread.run(CsApplicationEngineThread.java:55)

  Process is completed with the code:-1

  OK, I had to fix myself.

  I have a HP Pavilion D7, (3128ca).

  EU download drivers Legacy AMD here:

  http://support.AMD.com/us/KbArticles/pages/catalystlegacywin8.aspx

  Works again.