display of the values of ssize_t on a whole control

Similar Questions

• corrupted image displayed when the value horizontal elasticity 'contract '.

  Hello.

  Using forms and reports 10.1.2.3.0

  I got a report where I'm trying to show the images centered horizontally in their surroundings.

  To do this, I created an image element within the framework (a rehearsal setting, because the images are extracted from the DB), manually it centered within the frame, attached with an anchor to his surroundings and define its horizontal elasticity of 'contract' (vertical elasticity is set to "fixed"). It is actually the preferred method to do this and some threads in this forum recommend it.

  What I got in the PDF file was an image corrupted in some circumstances.

  To refine what I've created three different images (width * height)

  1. 1000 * 666

  2. 1000 * 750

  3. 1000 * 800

  load in the DB and tried to run the PDF file. You can see the result in the following screenshot:

  

  When I put the horizontal elasticity "fixed", the image is not damaged (this is not a solution because the image is left aligned then).

  Setting the OUTPUTIMAGEFORMAT to something different than default (JPEG) has not changed anything.

  Interestingly enough the Foxit PDF Reader it shows correctly, while AdobeReader X and XI and Inkscape even show the image corrupted (not only on my PC).

  We tried with multiple images/photos, and the only ones to be displayed correctly seem to be images with a 4:3 aspect or higher report. I was not able to determine exactly to what extent this behaviour.

  Anyone have any idea what may have caused this?

  Thanks in advance

  Markus

  Found a solution that is rather surprising for me: the value of the vertical elasticity of the image of "contract".

• display of the values of selected option buttons

  Hello
  
  It is an application that would allow users to go through a step-by-step process to build their product, in this case, it's ice cream.
  
  
  Description:
  
  There are six option buttons, four belonging to a radiobuttongroup and two others belonging to an another radiobuttongroup. In addition, there is a mx:TextArea (including the editable value false).
  
  This Panel will most likely go into a mx:ViewStack as a "first step" in the process of personalization of the ice cream. The selection of a radiobutton to every radiobuttongroup must be required to move forward (go to the next "step", as in the Panel following in the ViewStack).
  
  Problem:
  
  Allowing the user to select an item in each of the two radiobuttongroups and write values of these two selected radiobutton [such as specified by the value of the radiobutton = property 'radioButtonValue'] to the mx:TextArea, on different lines.
  
  I have been moderately successful in trying to do it, but I didn't know how to write two values in the same text box
  without crushing them each other.
  
  Misc.
  
  At first, I tried something to the effect of: ( changed from the 2 flex components Explorer)
  
  < mx:Script >
  <! [CDATA]
  
  Import mx.events.ItemClickEvent;
  
  Event handler function to display the selected button
  in a text box.
  private void handleConeType(event:ItemClickEvent):void
  {
  If (event.currentTarget.selectedValue is "sugarCone")
  {
  iceConeTextBox.text = "Sugar cône";
  }
  on the other
  {
  If (event.currentTarget.selectedValue is "waferCone")
  {
  iceConeTextbox.text = 'Wafer cone. "
  }
  }
  }
  }
  []] >
  < / mx:Script >
  Quite exaggerated to get something to work, I know. It was not very effective, and I sincerely hope that there are better ways to do this.
  
  I would like if possible avoid using two mx:textareas.
  
  Example of
  
  Here is a link to better describe what I'm talking about (Note: View Source is enabled).
  
  ConeChooser Application
  
  
  Thank you!

  You can access the selected radio button value the id of Group of radio button groups, you don't need to check each radio button individually. Then coneType.selectedValue will give you the value of a button radio is selected in the group, and the coneType.selection.label will give you the label of the currently selected option button or null if none is selected.

  Try this code:

  
  http://www.Adobe.com/2006/mxml '.
  Width = "100%" height = "100%" layout = "absolute" >
  

  private function updateText (): void {}
  var totalSelected:uint = 0;
  var cone: String = "";
  var size: String = "";
  If (coneType.selectedValue! = null) {}
  Cone = coneType.selection.label;
  totalSelected ++;
  }
  If (coneSize.selectedValue! = null) {}
  size = coneSize.selection.label;
  totalSelected ++;
  }
  iceConeTextBox.text = '\r', cone + size;
  If (totalSelected == 2) {}
  next_btn.enabled = true; to go to the next view in the viewstack
  }
  }
  ]]>
  
  horizontalCenter = red "0.5" = "0.5" layout = "absolute" >
  
  text = "Select your cone." y = "10" height = "44" fontSize = "25" horizontalCenter = "0" / >

  
  

  
  label = "Sugar Cone" width = "150" x = "2" y = "62" / >
  
  label = "Waffle Cone' width = '150' x '2' = y ="88"/ >
  
  label = 'Wafer cône' width = '150' x '2' = y = "114" / >
  
  label = "Chocolate dipped Wafer cone" width = "201" x = "2" y = "140" / >

  
  
  
  
  
  

  Vygo

• Better display of the values of shuttle LOV in a report

  Hello
  I created a LOV shuttle service in a form, then a report indicating (among others) the values chosen this LOV shuttle.
  If the user choose multiple values I don't like how they appear in the report (they must go in a single cell) because
  the user sees a list of items separated by ': '.
  Is there a simple way to show them for example as a list of points of ball or another form readable nicer human?
  
  Thank you
  Antonella

  Hello Antonella,.

  use

  select case when your_column_name is not null then '
  '||replace(your_column_name,':','
  ')|| '
  ' end as shuttle_column
  from your_table
  

  to avoid the ball when you have a NULL value.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Setting the value of a table of ActiveX control

  When controling a VI through ActiveX, how is possible to set the value of a table control?

  With digital controls, I have a problem: I just use SetControlValue and it works well:

  til SetControlValue ('y', 4) for example.

  However, in trying to do the same thing with a table, the control's value becomes an empty array:

  til SetControlValue ("arr', [3-4-5]") for example.

  What is the right way to do it?

  Hi Calvin,

  Have you tried passing a string and convert it to an array entry?  You can also try to use a 'matrix' control, rather than a table, as they are handled a little differently.

• custom display of the values in a column

  Hello
  
  I display "Qty" with ease. Currently, I see the installation my results next order.
  
  F1 f2 f3 f4 f5
  10 10 10 10 10
  
  I customize the installation command. It should look like this:
  
  F2 f4 f1 f3 f5
  10 10 10 10 10
  
  I try to drag and drop and it does not work.
  
  Is this possible?
  
  any response would be greatly appreciated.
  
  Thank you!!
  Ann

  Hello Ann,.

  To get a custom sort on column with values f1, f2, etc., you can create another column in the report, change the fx to a case statement, which would be used for sorting, sort on this column and hide it in the report.

  to see the case can be stated as below and sorting can be applied on this column.

  "case when TableName.ColumnName = 'f2' then 1 when TableName.ColumnName ="f4"then when 2 TableName.ColumnName = 'f1' then 3 when TableName.ColumnName ="f5"then when 4 TableName.ColumnName =" f3 "and then 5 end

  Thank you

• Attempts to display all the values in a list

  I built a lookup table for the sale of 10 products by each of the 50 States.
  
  Not every State will record a sale for each product, so some States have 5 products and other 10 and the other 4, etc. in the results.
  
  I want the output to display each of the 50 States and also view all 10 products in the second column, so I can export the results to excel and compare them to other data that I have. When a product is missing, it makes me extra work later down the line.
  
  I can't seem to find a way to force all 10 products appear in every State, even if there is no sale.
  
  Advice would be appreciated.
  
  Patrick

  The problem is that you need a LEFT JOIN products to States since as Derrick said, from the FACT table, you will normally only get the lines where there was a product sold. If you have two options.

  (1) you can create a "left join" in the answers using "Combine with a similar request" as I have said in this thread:

  Re: Section values list NULL in Pivot

  (2) the second, also in the responses, is to create the join in the Advanced tab of the application.

  Check this lnk:

  http://gerardnico.com/wiki/dat/OBIEE/multiple_subject_area

  The only difference is that instead of using FULL OUTER JOIN, you use LEFT JOIN

• The display of the values of Expression Language

  Hello:
  
  Sorry, but it's a matter of rookie...
  
  I'm trying to understand a problem unrelated to this issue. I need determine the language of the right expression for the source of an af:image value. When I go to the expression builder
  There are so many entries, I'm unable to find the right value to select. How can I learn what values are in there?
  
  So the question is, how do I watch these many values in Builder Express when running? Almost as if I want to watch the links through the debugger... How can I do this?
  
  Thank you

  Exactly as you say, you use the debugger. Set a breakpoint somewhere in a bean method, to display the debug window and select the data tab EL. There, you see an entry in the field, where you can enter any expression EL you like and you press on assess. You must enter the expression full like #{bindings.name.inputValue}.

  Timo

• Problem in the display of the values in the table

  Hi all
  
  I have data stored in the database in the form of comma and I want tot display these data in the table to the OFA.
  
  Help, please. There is little urgency.
  
  Best regards and thank you

  Hello

  To display values, you need create a transitional point of view and then create attributes according to your need,

  In one of my projects, I did the same thing when I was storage sort order in a line while the OPS, I need to display it in the rows in the canton:

  Pseudo code should look like this:

  Public Sub getSortOrder()
  {
  OAViewObject VO = getSortOrdrerVO1();
  Line line;
  String s1 = "";
  String s2 = "";
  String s3 = "";
  String s4 = "";
  If (VO! = null)
  {
  line = VO.first ();
  If (Row.GetAttribute ("SortOrder")! = null)
  S1 = row.getAttribute("SortOrder").toString ();
  If (Row.GetAttribute ("ColumnName")! = null)
  S2 = row.getAttribute("ColumnName").toString ();
  line = VO.next ();
  If (Row.GetAttribute ("SortOrder")! = null)
  S3 = row.getAttribute("SortOrder").toString ();
  If (Row.GetAttribute ("ColumnName")! = null)
  S4 = row.getAttribute("ColumnName").toString ();
  System.out.println ("sort order:" + s);
  }
  OAViewObject VO1 = getAdvResultVO1();
  Row1 row;
  If (VO1! = null)
  {
  Row1 = VO1.first ();
  Row1.SetAttribute ("SortColumn1", S2);
  Row1.SetAttribute ("Order1", S1);
  Row1.SetAttribute ("SortColumn2", S4);
  Row1.SetAttribute ("Order2", S3);
  Row1.SetAttribute ("SearchId", new Number (111));
  Row1.SetAttribute ("UserId", new Number(-1));
  Row1.SetAttribute ("SearchName", "Out Nouvelle1");
  }

  }

  Public Sub setSortOrder()
  {
  OAViewObject VO = getAdvResultVO1();
  Line line;
  String s1 = "";
  String s2 = "";
  String s3 = "";
  String s4 = "";
  If (VO! = null)
  {
  line = VO.first ();
  If (line! = null)
  {
  If (Row.GetAttribute ("SortColumn1")! = null)
  S1 = row.getAttribute("SortColumn1").toString ();
  If (Row.GetAttribute ("SortColumn2")! = null)
  S2 = row.getAttribute("SortColumn2").toString ();
  If (Row.GetAttribute ("Order1")! = null)
  S3 = row.getAttribute("Order1").toString ();
  If (Row.GetAttribute ("Order2")! = null)
  S4 = row.getAttribute("Order2").toString ();
  }
  System.out.println ("sort order:" + s);
  }
  OAViewObject VO1 = getSortOrdrerVO1();
  Row1 row;
  If (VO1! = null)
  {
  Row1 = VO1.first ();
  If (row1! = null)
  {
  If (s3! = null)
  Row1.SetAttribute ("SortOrder", S3);
  If (s1! = null)
  Row1.SetAttribute ("ColumnName", S1);
  Row1 = VO1.next ();
  If (s4! = null)
  Row1.SetAttribute ("SortOrder", S4);
  If (s2! = null)
  Row1.SetAttribute ("ColumnName", S2);
  }
  Row1.SetAttribute ("SearchId", new Number (111));
  Row1.SetAttribute ("UserId", new Number(-1));
  Row1.SetAttribute ("SearchName", "Out Nouvelle1");
  }

  }

  Hope this will help, for any clarification on the code, you can call me.

  Kind regards
  Out Sharma

• Display of the values null when there is no data

  There are two columns 'A' and 'B' in the report which has values. IF there is no data in the report, it displays the following system message
  
  
  + 'No results '.
  + The specified criteria result no data. This is often caused by the application of filters that are too restrictive or contain incorrect values. Please check your filters to ask and try again. The currently applied filters are given below. » +
  
  My requirement is, indicates a value of zero instead of this message in the table format and should show the table axis 0.
  
  Please give me your entries and help me find the solution
  
  Thanks in advance.
  
  Published by: user10414249 on December 1st, 2009 14:22

  Yes, it is a different problem. Mark this "answered" and open a new thread.

• In vCO how separate you the display of the value of the variable value

  I use Orchestrator 5.5 and I would like to create a way to present a value to the user when they start the workflow, and then set the variable to something different. For example when you select the operating system for your comments, you are supposed to choose VirtualMachineGuestOsIdentifier. It is a little more of the average skills users and quite frankly something I want to keep track of is.

  
  

  Is it possible to do something like in HTML? < option value ="winNetEnterpriseGuest">Windows Server 2003, Enterprise Edition<option/option/option>

  
  

  Hello

  don't know if you can do more kindly, but how about giving users a drop-down selection fall and correspond to the GuestOSIdentifier with a switch statement in a following script task?

  Tim

• Display of the values of query horizontally

  I have a subreport with a query that returns a single field. I want to do is view as a list on a single line, as opposed to the display of each item on its own line. I couldn't find a simple way to do this, so I tried to come up with a hack, but it does not work too well. I did just out a field with ValueList (query. FieldName, ",") and then set the print when the band to the query. CurrentRow EQ 1. Unfortunately the ValueList() function doesn't seem to work properly for this. I tried to resolve the application to advanced by specifying a name query, and then using this query in the function name and that does not work either. Someone has any idea how to run ValueList() or how to solve my particular problem?

  I came up with a solution for this, it is here for the benefit of third parties. Basically, I created a report function that was to build the list for me. The function is as follows:

  
  
  

  
  
  
  
  />
  

  
  

  Then I put print when broadband subreport to the query. CurrentRow EQ 1 so that the list would only get out once. Then in the area, I put the following expression: report.outputAsList (query, "MyColName")

  Works very well. Yet another hack, of course, but it's as well as I managed to get what I needed, since ValueList just won't play nice.

• display of the values of column in a single row

  Hello
  
  Can you give me please workarounds for this problem:

  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
  -- sample data
  CREATE TABLE TEST_DATA
  (
    CUSTOMERID   CHAR(2 BYTE),
    CITY         VARCHAR2(70 BYTE),
    ZIP          VARCHAR2(10 BYTE),
    CONTACTTYPE  VARCHAR2(30 BYTE)
  );
  Insert into TEST_DATA (CUSTOMERID, CITY, ZIP, CONTACTTYPE)
   Values ('23', '41', '3100', 'MAILING');
  Insert into TEST_DATA (CUSTOMERID, CITY, ZIP, CONTACTTYPE)
   Values ('23', '63', '4720', 'LEGAL');
  Insert into TEST_DATA (CUSTOMERID, CITY, ZIP, CONTACTTYPE)
   Values ('24', '44', '3200', 'MAILING');
  Insert into TEST_DATA (CUSTOMERID, CITY, ZIP, CONTACTTYPE)
   Values ('25', '36', '3500', 'MAILING');
  Insert into TEST_DATA (CUSTOMERID, CITY, ZIP, CONTACTTYPE)
   Values ('25', '39', '2800', 'LEGAL');
  COMMIT;
  
  select * from test_data;
  CUSTOMERID          CITY        ZIP     CONTACTTYPE
  23                    41       3100     MAILING
  23                    63       4720     LEGAL
  24                    44       3200     MAILING
  25                    36       3500     MAILING
  25                    39       2800     LEGAL

  Need a result like this:

  CUSTOMERID | MAILING_CITY | MAILING_ZIP | LEGAL_CITY | LEGAL_ZIP
  23                 41               3100          63        4720
  24                 44               3200          NULL     NULL
  25                 36               3500          39        2800

  Thank you very much
  Alex

  Try this...

  This works for me in Oracle 10 g.

  select customerid,
         MAX(DECODE(CONTACTTYPE,'MAILING',city,null)) MAILING_CITY,
         MAX(DECODE(CONTACTTYPE,'MAILING',zip,null)) MAILING_ZIP,
         MAX(DECODE(CONTACTTYPE,'LEGAL',city,null)) LEGAL_CITY,
         MAX(DECODE(CONTACTTYPE,'LEGAL',zip,null)) LEGAL_ZIP
  from test_data
  group by customerid
  

  Kind regards
  Rakesh

• APEX 4.0 IE8 - definition of value with dynamic Action - no display of the result

  Hello

  I use APEX 4.0 and IE8. I made a dynamic action that fires on the editing an item.

  Event: change

  Rype of selection items

  Article: P77_item_1

  Condition: No strings attached

  Real Actions: The value

  Action: Set

  Set type: PL/SQL function body

  : P77_item_2: = Y;

  Page items to submit P77_item_1

  Items affected

  Items of Type selection

  Elements P77_item_2

  I see that it works in session. Now, I see that P77_item_2 is inserted. But there is no display of the value.

  I tried item_2 as textfield, view only, or read-only, but the behavior is always the same. What can I do to show the change in the order of the day?

  Thank you!

  Le_di wrote:

  I use APEX 4.0 and IE8. I made a dynamic action that fires on the editing an item.

  Event: change

  Rype of selection items

  Article: P77_item_1

  Condition: No strings attached

  Real Actions: The value

  Action: Set

  Set type: PL/SQL function body

  : P77_item_2: = Y;

  Page items to submit P77_item_1

  Items affected

  Items of Type selection

  Elements P77_item_2

  I see that it works in session. Now, I see that P77_item_2 is inserted. But there is no display of the value.

  I tried item_2 as textfield, view only, or read-only, but the behavior is always the same. What can I do to show the change in the order of the day?

  Do not have access to an instance of APEX 4.0 to study, but any code of "PL/SQL function body" must include a RETURN clause:

  :p77_item_2 := 'Y';
  return :p77_item_2;
  

• Have the value displayed on the bar graph output

  I use the OBIEE 11.1.1.3. I have a question about the display of the values in the chart. Currently, if I create a bar horizontonal chart the values for each of the bars are only visible if I hover above the bar. Is there a way to display the actual value on the bar or another method to display this value without having to go.
  
  What I want is something like this:
  
  [http://blog.fusioncharts.com/wp-content/uploads/2011/03/column-chart-with-data-values.jpg]

  GoTo General properties of table-> nameplate-> show data labels and select 'Always' from the menu drop down.
  What shud solve your problem