Display problems when you perform sfc/scannow

Similar Questions

• When you run sfc/scannow, using i386, getting the error "files required for Windows to run correctly have been replaced by unrecognized versions.»

  When I run the sfc/scannow, I get a message telling me "files which are required for Windows to run properly have been replaced by unrecognized versions." To maintain stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition Service Pack 3 CD now"with options; try again, more information or to cancel.

  A CD came with the computer and I don' t know how, or if I can use the i386 at this stage. contains WINNT i386. EXE, and WINNT32.exe indicating me a full copy of the system.

  If it is doable but requiring a major tech-skills, I will put an end to this attempt and try to find a CD. (old dog, new tricks)

  Thanks for any advice.

  Hello

  Please go through this page.

  http://www.updatexp.com/scannow-SFC.html

  Thank you

  Dinesh

  You can vote if my answer is helpful. Thank you

• Display problems when you run applications JavaFX 2.0 with multiple monitors

  I noticed a number of issues when running JavaFX 2.X applications on a system with multiple monitors. My setup consists of 2 monitors (primary and secondary on a dual graphics card) and my third on a separate graphics card.
  
  The questions I have observed are,
  
  (1) the application is not too sensitive when running on the second or third monitor.
  
  (2) when the application runs on 2 monitors and re-tire it will only redraw correctly on one of the monitors. The application will be displayed as a black box on the another moniter
  
  (3) where the application does not run on the primary monitor and a ChoiceBox is selected choice appears as expected but it blackens the application in the background.
  
  Someone else encountered similar problems? I'm going to raise a JIRA with screenshots and details of my system if other people are able to confirm that they are also suffering from similar problems.

  Hi, I had similar problems. My application uses 2 monitors and now everything works just perfect. It turned out that the interface is causing these disorders. I changed mine, then he worked (actually more the new installed I also had to update the driver for the new interface)

• Problems when you do a lot of landfills

  Hirt,

  Thanks for your help. With the changes, you suggested that he now works with jmx authentication as well.

  However, I had another question. I can't make JFlow work. I installed the plugin and whenever I have right click on my tab use remotely of the JAVA virtual machine and click the Dump of the heap, it opens popup system for me to select where to save the dump. But as soon as I select and click OK, it throws this error

  Problems when you perform the Dump heap for JOverflow analysis

  Problems when you perform the Dump heap for JOverflow analysis

  When you've got the system file selection popup,

  have you selected a location that is writable (by the same path) to your local machine and the remote JVM?

  JOverflow send any data over the network, simply of creates a heap dump in a local file to the profiled JVM (in this case your remote JVM) and opens the way for the same file in the JMC client.

• When I run "sfc/scannow" he gave the following results; "windows resource protection found corrupt files but was unable to fix some of them

  * O.T. AND NON-RESPONSE ERROR

  Hi, my laptop (Dell vostro) has been very slow lately, when I run "sfc/scannow" he gave the following results; "protection of resources windows found corrupt files but was unable to solve some of them"

  How ca I fix it please help

  Select Start, all programs, accessories, right-click right-click command prompt and click Run as administrator in the menu dropdown. Type or copy / paste: findstr/c: "[SR]" %windir%\Logs\CBS\CBS.log > '% userprofile%\Desktop\sfcdetails.txt' and press the ENTER key. You will find a sfcdetails.txt file on your desktop.

  "Please note there are three spaces in the command: findstr - c/c/c, between [SR]" and%windir% between CBS.log and > ' % userprofile .

  Please download a copy of your file sfcdetails.txt on your OneDrive as a shared file and post a link here. Enter sfcdetails.txt in the search box above the Start button and press the ENTER key to locate the file created.

  Note The Sfcdetails.txt file contains details of every time that the System File Checker tool has been run on the computer. The file contains information about the files that are not repaired by the System File Checker tool. Check the date and time entries to determine the problem files that were found last time that you ran the System File Checker tool.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  I do a backup of the 'Normal' at the beginning of the month.  Then, at the end of the first week, I do a "Differential" backup (using the same "backup job" but change to type "Incremental".)

  Well the difference is huge and to study, I see that a lot of files that I don't know that I didn't take the week since the 'Normal' backup have the Archive attribute set.

  Is the 'Normal' compensation not the bit mode backup of archive?  Another thing would be randomly set the attributes to archive?  Is there a ghost in the machine?  Inquiring minds want to know.

  Hello

  Differential backup marks files as having been backed up (in other words, archive attribute is not cleared). This is normal.

  For more information please visit:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/types_of_backup.mspx?mfr=true
  http://msdn.Microsoft.com/en-us/library/aa174458 (SQL.80) .aspx
  http://msdn.Microsoft.com/en-us/library/ms345448.aspx

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I am still getting error code 8004ff83 when you perform the update

  I am still getting error code 8004ff83 when you perform the update

  I read that in safe mode, it would be possible to do the update. What is safe mode?

  Hello

  Perform the steps from the link below and check if the problem persists.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.

• Microsoft Office regularly crashes when you perform a save as on a network location mapped

  Microsoft Office regularly crashes when you perform a save as to any place of the network off the internal hard drives on my laptop. The version is 14.0.6112.5000 (64-bit).

  The question seems to relate to a problem with the Windows Explorer, I find that if I first open the folder by browing through Windows Explorer crash is much less likely to occur. It is not always, but usually after the 4th or 5th attempt I can save the document. Once I made the first save as a new document, I didn't backup after problems.

  This happens only with the Office suite of products - I have no similar problems with third-party programs.

  What is happening is the Save dialog box under opens, but when I try to navigate through the program crashes. I can usually (but not 100% of the time) scroll to reach readers intgernal, but almost always crashes when you try to reach the network mapped drives unless I have already sailed on these places by car outside the word.

  It is a relatively new problem. I did a clean install of Windows 7 (x 64) on my laptop in November 2011, everything was fine until April. My thought is that a .dll file is corrupt, or there could be a problem of accidentally unplugging a smartphone or Tablet without ejecting it first.

  Suggestions are greatly appreciated, I really don't want to go through the hassle to do a clean install and then restore all my programs again.

  Thank you!

  Julie

  I think that the first thing would be to try a repair.
  Start > Control Panel > programs and features > click on your Office installation > click Change > repair

  I hope this helps.

• IPL fail... no trace to reposition to when you perform the direct load task.

  Trying to do an initial load, I get this error whenever I go out a table with data in it:

  Treatment FOO table. BAR

  2013-11-21 23:22:15 WARNING EXTRACT OGG-01194 task LOADREPL added: there is no trace of reposition to when you perform the direct load task.

  Context of the source:

  SourceModule: [er.idlx]

  SourceID: [/ scratch.local/mmar/view_storage/mmar_14516066/oggcore/OpenSys/src/app/er/idlx.c]

  SourceFunction: [IDLX_complete_tcp_msg]

  SourceLine: [383]

  ERROR OGG - 01203 EXTRACT abending

  ERROR OGG-01668 PROCESS ABENDING.

  The strange thing is, I can use the same extract initLoad and loadRepl replicat... except using a different source schema.table and schema.table of the target, and it will work!

  User El error.  I increased the storage space available for the target schema that wasn't and the problem disappeared.

• ORA-01403: no given available problem when you use FETCH of AUTOMATIC LINE to fill

  ORA-01403: no given available problem when you use FETCH of AUTOMATIC LINE to fill out a form.
  
  1) has created a FORM on the use of assistants of EMP. This creates an AUTOMATIC FETCH of LINE
  NAME OF THE TABLE - EMP
  The PRIMARY KEY containing - P2099_EMPNO point
  Primary key column - EMPNO
  
  By default, automatic extraction has a "process Error Message' of"Unable to fetch line."
  
  (2) created an HTML region. In this region add
  text P2099_FIND_EMPNO element
  GET_EMP submit button
  The update branch the conditional branch created when the Create button to set P2099_EMPNO with & P2099_FIND_EMPNO.
  
  If I then turn the page, enter an employee in P2099_EMPNO number and press the GET_EMP button, the form is filled correctly. But if I get an employee who does not exist, then I get error oracle ORA-01403: no data found and no form but a message at the top of the page 'Action transformed '. I was expecting a blank form is displayed with the message 'Could not extract line.'
  
  In conditioning automated extraction so that it checks that the line exists first, I can work around that. Change the fetch EMP automated line so that it is conditional
  EXIST (SQL query returns at least one row)
  
  Select 'x '.
  from EMP
  where EMPNO =: P2099_EMPNO
  
  
  But this means that when the employee exists I must be get DB twice, once to the State, and then again for the extraction of the actual line.
  
  I can't change so I don't get the Oracle error, rather than work around for a above is there something? I wonder now if the automatic extraction of line is only supposed to be used when you bind a report to a form and that I should manually write the extraction process. The reason for which I don't have at the moment, it is that I'm trying to stick with the auto generation Assistant as I can.
  
  Any ideas?
  
  Thanks, Pete

  Pete:

  The process Assistant APEX (ARF, ARP etc) errors are generally not recoverable. The error encountered is simply displayed on a page by using the model of "Error Message. So as you said yourself, you create your own process line Fetch and have the opportunity to customize the management mistakes, or you paste a validation on the page to verify that a folder can be accessed for the views expressed.

  CITY

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• I have error vowsem216dll come often when you turn it on and when you perform updates

  I have error vowsem216dll come often when starting up and when you perform updates today has 32/ntdll.dll error. How do I sort them?

  Many had / have Windows 98 so far.  He may not be able to access most of the internet, but it works.

  You upgrade the computer to another operating system platform?

  Windows XP is more supported by Microsoft but as long you are able to locate the drivers/software to operate, do. Windows 8 is developing so I wouldn't waste my money on Windows 7 right now.

  Restart the computer and the logo of the manufacturer, start typing F8

  Select Mode safe mode with networking

  Download the following tool and run a full system scan to exclude the malware.  If your system is infected your anti-virus software will have been compromised.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  You receive messages such as:

  Rundll32 - this program has performed an illegal operation and will be shut down.

  RUNDLL caused a General Protection Fault in module MMSYSTEM. DLL to 000's: 00000032

  Search for a file located in c: \ windows------vowsem 216.le dll

  After that the file is associated (application/program)

  The only reference I can find about vowsem216dll is on yahoo or pharmaceutical products of brand vowsem responses

  http://UK.answers.Yahoo.com/question/index?QID=20081001095149AAvpVDo

  Start > type MSCONFIG

  Search for list of vowsem and uncheck the box

  Click on apply, Ok

  Restart the computer

  Check do not show me this again in the Configuration window.  It will show at startup, and except if you check the box to not show it will nag.

  Click Start > run

  Type System.ini

  Click OK

  Search for mmsystem

  If this line does not exist, add it.  Save and close the System.ini

  Restart the computer

• When you perform a reset wilI it allow you to do another set of recovery disc

  When you perform a reset to factory setting on windows 8. It will allow you to make another set of recovery disc?

  Hello

  It depends on how do the reset

  (a) using a new set of HP or the recovery partition (no game has been created): Yes

  (b) using a set that was created from your machine before: No.

  Kind regards.

• I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." 0x8002801D error

  Error of the IDM

  I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." Error 0x8002801D in windows XP. Pleasw help to y for remedy.
  Thank you

  Hello

  (1) what you're trying to download?

  (2) how you try to download?

  (3) what browser you are using to download?

  (4) don't you make changes to the computer until the problem occurred?

  Step 1: This error occurs when your browser and IDM are set to run under different privileges.

  Maybe you have set to run IDM with administrator rights. This is not correct. IDM Ouvrezledossier if please, right-click on 'IDMan.exe', select the 'Properties' menu item, switch to the "Compatibility" tab and uncheck the checkbox "Run this program as Administrator" (arrow 2 on the image). In addition, you must remove the compatibility with previous versions of Windows if there is none activated (arrow 1 in the picture).

  

  If this does not help, try to do the same for the executable file of your browser. In addition, turn off the feature with older versions of Windows and "Run this program as Administrator" checkbox.

  Step 2: You may need to run IDM with administrator once rights to register its DLL files. Exit IDM using "Tasks-> output" of the main menu. Then right click on IDM launch icon in the Windows (arrow 1 in picture) programs launch menu and select "Run as Administrator" (arrow 2 on the image).

  

  Then exit IDM again and run normally.

  Hope this information is useful.

• This installation package could not be opened. Contact the application vendor to verify that this is a valid windows installer package when you perform an installation of 2013 Pro Evolution Soccer

  This installation package could not be opened. Contact the application vendor to verify that this is a valid windows installer package when you perform an installation of 2013 Pro Evolution Soccer

  Hello

  Are you using an installation disc or try to install from a download online?
  Visit the game manufacturer if your computer meets the minimum requirements to install the game. You can also contact for a solution to the question you posted.
  https://www.Konami-pes2013.com/en/