Display the number of row in DataGrid

Similar Questions

• Displays the number of rows in the table displaying a named criteria query data

  I created a test named for my View, called 'Criteria1' and Criteria1 to create a group of ADF with Table query. I want to display the number of rows in result when a search is performed. How can I do?
  
  Thanks in advance,
  Tom

  As mentioned, you can add outputText and you must give OutputText partialTriggers as query component your Id. Thus, when you give a search on the query component, it will refresh the outputText with the number of lines.

  
  ID = "ot1" partialTriggers = "id of the component of motion here" / > ""

• How do to display the number of rows Inserted/deleted etc. in PL/SQL

  In Oracle 10 g PL/SQL, I have a delete statement in a stored procedure. This isn't in a cursor. I want to see the number of lines that I deleted. I can use dbms_output.put_line package. I should know this, but I don't have time to perfect syntax. How do I get the number of rows that are deleted and the display via dbms_output.put_lline?

  For example:

  set serveroutput on
  
  begin
  
     delete  dept;
  
     dbms_output.put_line(sql%rowcount);
  
  end;
  /  
  

  Miguel

• JDeveloper 10.1.3.4 af:table displays the number of rows of erratically

  For the experienced:
  
  There are several pages in the web application I developed using JDeveloper 10.1.3.4, and it allows the user to navigate between the pages back. A page displays the selected rows of a database table, using the af:table component.
  
  To display all the rows returned by the query in the underlying object in the view, I put the Rows of the af attribute: table to 0. However, rather than show lines as expected, the currently displayed lines are.
  
  1. when the user connects and starts a new session and accessing this page for the first time, the table on this page shows all lines (with the database I check the problem now, ago total 31 lines selected in the database table and all 31 lines are displayed).
  2 but if you leave this page, then come back, it shows only 10 lines and the top and bottom of the table actually appear dimmed (i.e., not in use) links "previous" and "next," which did not appear when you went to this page for the first time in the session. And there is simply no way to see other 21 pages.
  
  I thought that the attribute can be defined as lines =-1 and tried. But - 1 is not accepted. So I tried to place the lines = 25 and ran the application. His behavior is as follows:
  
  1. the first time in a session you navigate to the page, it works as you would expect with the lines = adjustment 25.
  2. When you leave the page and return, it shows the lines 22-31 and lets you click to display 'previous 21. However, if you click on this link, instead of display lines 1-21, it displays lines 1 to 25 and from there, works as you would expect with the lines = adjustment 25.
  3 leave the page and come back, it shows the lines 21-31 and displays the 'previous 20' link. A click on it and you do not see lines 1 to 20, but lines 1-25. Again, from there, it works as you would expect with the lines = 25 setting, until you leave the page.
  
  What could be wrong? And is there a solution to this problem?
  
  Thanks a lot for your help!
  
  
  Newman

  Hello

  just played with him a bit... looks like you did not for the iterator in def-1 page as the size of the beach:

  with that, I tested table with lines = 0, as well as 25 and it worked ok...

  Kind regards

  Branislav

• How to display the number of lines of time giving the values of the columns?

  Hi all
  
  I want to display the number of rows times the value exists in the column num in the query below
  
  
  

  with t AS
     ( SELECT 'venkatesh' NAME, 'hyd' LOC, 2 NUM FROM DUAL
       UNION ALL
       SELECT 'prasad' NAME, 'hyd' LOC, 3 NUM FROM DUAL
       UNION ALL
       SELECT 'krishna' NAME,     'hyd' LOC, 1 NUM FROM DUAL )
    SELECT T.* FROM T
    CONNECT BY ROWNUM <= NUM
  
  
  Expected output:
  
           venkatesh            hyd      2
           venkatesh            hyd        2
           prasad                 hyd        3
           prasad                   hyd      3
           prasad                   hyd      3
           krishna           hyd       1

  Published by: Nag Aswadhati on November 1, 2012 12:34

  Aswadhati NAG wrote:
  Hi all

  I want to display the number of rows times the value exists in the column num in the query below

  Expected output:
  
  venkatesh            hyd      2
  venkatesh            hyd        2
  prasad                 hyd        3
  prasad                   hyd      3
  prasad                   hyd      3
  krishna           hyd       1
  

  With the help of connection by: -.

  with t AS
     ( SELECT 'venkatesh' NAME, 'hyd' LOC, 2 NUM FROM DUAL
       UNION ALL
       SELECT 'prasad' NAME, 'hyd' LOC, 3 NUM FROM DUAL
       UNION ALL
       select 'krishna' name,     'hyd' loc, 1 num from dual )
    select t.name, t.loc
    from t
    connect by level <= num
           and name = prior name
           and (prior sys_guid() is not null);
  
  NAME      LOC
  --------- ---
  krishna   hyd
  prasad    hyd
  prasad    hyd
  prasad    hyd
  venkatesh hyd
  venkatesh hyd 
  
   6 rows selected
  

• Add the number of rows in the table on the Page Framework OA

  Hi all
  
  I need to add a line at the bottom of a table in the OA framework to display the number of lines for the underlying table VO. Can someone point me in the right direction to get there?
  
  Thanks in advance!
  
  Kristopher

  Hi Kristopher,

  As directed by your post, my understanding is that you want to have a line at the bottom of the table that contains a field that displays the number of rows found in the t... RT?

  You can implement the same in the following way,
  You can add a footer to your table and add a messageStyledText point in it. At this point, you can assign the value of VO.getFetchedRowCount ().

  Hope this is what you are looking for.

  Kind regards
  REDA Papdeja

• Text box layout problem - and the number of rows displayed

  Hello
  
  Wonder if you can help with my 2 problems
  
  1. when I create text boxes, the label is displayed to the left of the text box. How can I display label above the text box
  CGH
  
  Label
  TextBox
  
  Instead of
  
  Text box label
  
  2. when I ask report showing my data, that it shows that 15 records per page, for the next set of records, I need to click on the following icon at the bottom of the table to go to the next page.
  How can I view all on the same page?
  
  Thanks for help

  1. simply check this using the Horizontal / Vertical alignment of attribute in the section of the label of the element of the Page definition.

  2. in the report of the attributes, the value of the plan of paging None; and the number of rows and number of maximum lines to more than the number of rows that will be returned by the report query.

  (You should only ignore this last you really know that the number of lines make this a reasonable option.) Nobody is going to want to scroll through thousands of lines or wait 5 minutes for total information overload. You wouldn't be popular with your admins/ISP network due to the excessive bandwidth consumed either.)

• get the number of rows affected by their table top

  Hello, I need to count the number of rows updated in table form. In the process of ApplyMRU, I can use the string substitution #MRU_COUNT # to show the lines updated in a success message, but I need to get this value and store it on a table. Any help would be much appreciated. Thank you.

  oscarjavier99 wrote:

  Hello, I need to count the number of rows updated in table form. In the process of ApplyMRU, I can use the string substitution #MRU_COUNT # to show the lines updated in a success message, but I need to get this value and store it on a table. Any help would be much appreciated. Thank you.

  For that you would benefit from the APEX$ ROW_STATUS integrated substitution string.

  1. create a page element display only (in my case P15_UPDATED_ROWS) Save Session State set to Yes and the Type of Condition is set to never.

  2. Add a calculation after the shows with a Type of static assignment and calculation value 0 to reset the counter whenever the page is sent.

  3. Add an On submit - after calculations and Validations process of PL/SQL page linked to your tabular presentation with a Status of Type PL/SQL Expression and Expression 1 :apex$row_status = 'U' and the code of the following process :

  :p15_updated_rows := :p15_updated_rows + 1;
  

  If you don't actually means "day" in the strict sense, and then change the status of process to include possible APEX$ ROW_STATUS 'C', 'U', and "D" values as needed. If you want to count all created, updated and deleted lines, do not add the condition to the process, but make sure the extended run is set to createand changed lines.

• display the data in row columns

  I looked through the previous posts, but it is impossible to find a solution to my problem.
  
  I want to display the data in row columns.
  I have shown in the table below and test data and the sql code that gives me the result desired.
  However, you can see that the sql depends of me knowing all the values in the column "rank".
  I want a way to produce the output without knowing the values of rank.
  

  CREATE TABLE test1 (
    accno       NUMBER,
    holder_type VARCHAR2(10),
    rank        NUMBER)
  
  INSERT INTO test1 VALUES (1, 'acr', 0);
  INSERT INTO test1 VALUES (1, 'bws', 1);
  INSERT INTO test1 VALUES (1, 'aaa', 2);
  INSERT INTO test1 VALUES (2, 'cds', 0);
  INSERT INTO test1 VALUES (2, 'xxx', 1);
  INSERT INTO test1 VALUES (3, 'fgc', 0);
  INSERT INTO test1 VALUES (4, 'hgv', 0);
  INSERT INTO test1 VALUES (4, 'bws', 1);
  INSERT INTO test1 VALUES (4, 'qas', 2);
  INSERT INTO test1 VALUES (4, 'aws', 3);
  
  Here's the required output:=
  ACCNO     ALLCODES
  1     acr bws aaa
  2     cds xxx
  3     fgc
  4     hgv bws qas aws
  
  I.E. for each accno display the holder_types in rank sequence.
  
  SELECT * FROM
  (SELECT 
         a0.accno,
         a0.holder_type || DECODE(a1.holder_type, NULL, NULL, ' ') ||
         a1.holder_type || DECODE(a2.holder_type, NULL, NULL, ' ') ||
         a2.holder_type || DECODE(a3.holder_type, NULL, NULL, ' ') ||
         a3.holder_type || DECODE(a4.holder_type, NULL, NULL, ' ') ||
         a4.holder_type allcodes
    FROM (SELECT accno,
                 holder_type,
                 rank
            FROM test1
           WHERE rank = 0) a0,
         (SELECT accno,
                 holder_type,
                 rank
            FROM test1
           WHERE rank = 1) a1,
         (SELECT accno,
                 holder_type,
                 rank
            FROM test1
           WHERE rank = 2) a2,
         (SELECT accno,
                 holder_type,
                 rank
            FROM test1
           WHERE rank = 3) a3,
         (SELECT accno,
                 holder_type,
                 rank
            FROM test1
           WHERE rank = 4) a4
   WHERE a0.accno = a1.accno(+)
     AND a0.accno = a2.accno(+)
     AND a0.accno = a3.accno(+)
     AND a0.accno = a4.accno(+)) a
     ORDER BY accno

  So you're after what we call 'Aggregation in the chain.'

  Check this link as it highlights several techniques:

  Aggregation of string techniques

  A Re: Concat ranks of the values in a single column Michael

  At Re: multiple lines in a single line in the 'single column Table' followed by reason of Billy on the conduct of a stragg first.

  In addition, 11 GR 2 has the LISTAGG function.

• How to determine the number of rows in the database and save the result to a local variable?

  Hello

  I'm a newbie in the use of TestStand, databases and SQL, and now I've met difficulties. I use TestStand 2014 (32 bit).

  I have a need to know the number of rows in a database and save that number in a local variable. I tried to practice using the database of the Types of step provided with TS. I tried to use the following in a SQL statement:

  Locals.NumberOfRows = ("SELECT COUNT (*) FROM TEST_TABLE")

  It returns an error: specified value is not the expected type. My goal is possible in this way, or I'm doing this completely wrong?

  -RautSa

  Thank you for your response, Norbert. I have a database of who wins new values at random, and sometimes I need the exact number of rows in this table.

  I managed to achieve my goal by using the SQL statement: "SELECT COUNT (*) as Rowcount OF TEST_TABLE", followed by a data GET operation, which records that number of lines in a local variable.

  -RautSa

• How to display the number of socket in the ListBox UI control?

  I want to display the number of socket in the Listbox control on execution. I use DisplayExpression method, set the entry as '% TestSocketIndex', but it does not work. This methond works fine if I connect the Combobox of UI control to ExecutionViewMgr.ConnectExecutionList.

  Is there a solution

  

  

  Hey wellsc,

  I have looked at this issue and ran into the same issue you described. I dropped the CAR 482840 for a developer study the matter further. Unfortunately, workarounds only I can think immediately would be to use a ComboBox control or to implement the functionality desired by using a native LabVIEW ListBox.

  Let us know if there is something we can do to help, or if you have other questions about how to implement one of the workarounds. You can still use this CAR number to check the status of the issue, as well.

• I want to display the number of success / testing failed in the Testtand of xml report, please help me

  Hi, I want to display the number of success / testing failed in the Testtand of xml report, please help me.

  Later, my requirement is that I should be able to view the number of test / has not passed in the header of the report too.

  I have attached a sequence to give you an idea of how to get the number of results (I don't check it works ), I used 'SequenceFilePostResultListEntry' callback to calculate the number of results.

  and the number of results is passed to the 'ModifyReportHeader' through Globals files, where you can edit the XML file to display in the Repot (follow the link in my previous post).

  Hope this helps

  AshwiN,

• Z5 no longer displays the number of notifications that I have on each app

  Given that I've updated the marshmallow last night, my Z5 no longer displays the number of notifications that I have on each app :-( Does anyone else have this problem? Notifications will still appear in the notifications bar, but not on the applications themselves (the few).

  I just got some information about this. This is due to the fact that the snippet of code (API) which has been used by applications such as WhatsApp Messenger, to display unread messages, was not official, and is obsolete. The new API is shared among the partners and will require implementation on the side of the partner.

• Count the number of rows in a table (s)

  Hi all

  I have a TKT_PRIORITY_LK table that I want to count the number of rows returned by a priority level... say Low, Medium, High, critical. I want to be able to count how many of each created are they, instead returning ID instead, if making any sense... Can you please help with this.

  Example; Select count (*) in TKT_PRIORITY_LK

  PRIORITY group

  Kind regards

  Sandrine

  Try this

  Select a.PRIORITY, count (*) from TKT_PRIORITY_LK a, TKT_TICKET_MAIN b

  where a.id = b.PRIORITY_ID

  A.PRIORITY group

• See the number of rows affected the performance of sqlplus to a sql file

  Hello

  It's just we have a sql file that contains a bunch of select/update/insert statements.

  I have a unix script that calls sqlplus on this sql file. However, at the exit I don't get the number of rows affected.

  Without adding any code in the input sql file, how can I change the code of sqlplus shell script to print the number of rows affected for each statement in the sql file?

  ${ORACLE_HOME}/bin/sqlplus -L >> ${LOG_FILE} 2>&1  << EOF
    ${ORAID}/${ORAPASS}@${ORAINS}
    whenever sqlerror exit sql.sqlcode;
    set echo on;
    set feedback off;
    set serveroutput on;
    @${SQL_FILE};
    exit;
  EOF
  RC=$?
  

  The SQL_FILE of entry content is:

  select 12 "col1" from dual;
  select 'abcd' "col2" from dual;
  select;
  select 13 'col3' from dual;
  

  The result of the race of sqlplus is (LOG_FILE):

  SQL*Plus: Release 11.2.0.2.0 Production on Fri Jun 6 14:28:00 2014
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  Enter user-name: 
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
  Data Mining and Real Application Testing options
  
  SQL> SQL> SQL> SQL> SQL> SQL> select 12 "col1" from dual;
  
        col1
  ----------
          12
  SQL> select 'abcd' "col2" from dual;
  
  col2
  ----
  abcd
  SQL> select;
  select
       *
  ERROR at line 1:
  ORA-00936: missing expression
  
  
  Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
  Data Mining and Real Application Testing options
  

  Thank you

  Srinivas - y.

  1. echo setting
  2. Set feedback off;

  use

  Set of feedback on