Unable to connect to a wireless router (even with a strong signal)

Similar Questions

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• Unable to connect to the wireless router

  I can't connect to my wireless router.  My PC shows that the router has an excellent signal strength. The password is correct, but it will not connect.  What Miss me.

  Moved from Explorwer Internet

  Original title: wireless network device network Ethernet network router

  Hi Trisha,

  Many routers need firmware updates to work with Windows 7. Maybe it's the issue.

  Please answer these questions:

  1. What is the brand and model of the router?
  2. If it works much earlier?
  3. Any changes made to the computer before the show?
  4. What is the exact error message received when you try to connect to the router?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:

  Set up a wireless router

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Setting up a wireless router
  http://resource.Dlink.com/connect/setting-up-wireless-router/

  Post back with the State of the question.

• Satellite A105 - unable to connect to the wireless router more

  I had the success of connection to a router Wireless Linksys for the last few months. Today, that I couldn't connect to the Linksys still another. A few times I have to connect to the Linksys router, but I got a weak signal so I would be disconnected. The green bars on the router Linksys under available networks are all solid green full bars, but I can't? t connect.

  To do or check to login once more?
  Thank you

  HM, you will need to do some research! What was the last you´ve installed applications? Installed new drivers/tools/software on your computer?
  If not you already installed the latest drivers for the chip wireless for your laptop? If not already done, then try it and Don t forget to update BIOS. :)

  If anything brought success then just to give a few comments. :)

  Welcome them

• Unable to connect to a wireless router with my laptop

  I bought a laptop on 12/26/08 and now I have technical difficulties with regard to the internet wirelessly, via the LAN connection it s ok and wireless radar can see all available networks, but cannot communicate with them.

  It starts and then say that it s a unverified network and just say connect but don't make any progress, and the internet is still not functional

  I m using the router without wire of 7mg eircom and is placed outside the door of the room of my bed with full strength.

  It would be interesting to know what laptop you have.

  Have you tried to update the driver WLAN? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  Have you tested the connection without security as a hidden SSID, MAC address filtering and so far? Try this.

• Unable to connect to the wireless router. No ip address

  Recently, I plugged a Linksys E2000 router to connect two computers for internet access. Computer has access. 2nd computer cannot obtain an ip address. using windows xp sp 3. Technical support was no help.

  Hello

  As a first step put the computer near the router and start with the security off the coast.
  When it works, take it back to the final spot. If it stops then working, then you have a problem of distance.

  In general

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• see the ssid but unable to connect to the wireless router

  I just installed a WRT160N router, I can see the ssid of the network wireless networks but cannot establish a connection with my laptop windows xp or my wify active blackberry...  Could I connect my mac laptop son with no issues... of ideas?

  Thanks for the suggestions, none of them had however.  The solution was to allow the width of the channel must be set to Auto 20 or 40 mhz, selecting only 20 mhz or individually selecting the 40 mhz would not so much my son computer macbook laptop and my IBM thinkpad to connect. But the default configuration which is set would not work. From the manual - yes I have finally checked it...  «Channel width Select Auto if you want that the router to automatically determine the width of the channel proper (20 MHz or 40 MHz) to use, or select 20 MHz only (default) If you want the router to operate Wireless-B and Wireless-G mode only.» For optimal performance, Auto is recommended. »

• Desktop computer can not detect the wireless router, even with adapter

  Hello

  I broke my laptop so I got out my old office since 2003. Its a gateway computer. There was no place where to connect my internet wire so I went out and bought a usb wireless adapter and updated my computer to Windows XP Home Edition. I put the CD and went through the Hardware Wizard. I said to her work and connected to the internet on the adapter set up the screen. BUT I can't access the internet. I tried the wizard network wireless, but sound does not detect anything either and does not work when I try to do it manually either.

  Help, please. I can't afford a new laptop close to Christmas it :(

  Hello

  • You have security software installed on the computer?

  I suggest to access the link below and follow the steps in the article to resolve the problem of connectivity wireless network on your computer and check to see if it helps you solve the problem.

  http://support.Microsoft.com/kb/870702

  You can also navigate to the link below and follow the steps in the article to set up the connection Wireless on your computer.

  http://www.Microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP photosmart 5520 cannot connect to the wireless router

  The printer has worked I went on holiday, and now it will not work. I have run the wireless network test, and it says "hp printer is unable to connect to your wireless router.  The wireless router is connected and works fine.  My hp wireless computer (windows 7) works very well.

  The structural 'found ssid network name' report, said down

  But "current configuration" has shown the SSID

  can anyone offer a fix?

  Help

  colleenmercy

  Hi colleenmercy,

  In the network menu, select default network.  This reset the current network settings and will help you reconnect the printer to the network.  You can use the Wireless Setup Wizard or reinstall the HP software to reconnect.

• Unable to connect to other wireless networks

  RE: Unable to connect to other wireless networks

  • My computer is a HP Pavilion dv7 1232nr Entertainment Center
  • My OS is Windows Vista 64 bit
  • I have installed many things over the past year, but know that at some point, I was able to get on free Wi - Fi in hotels

  I am able to connect to my network, but when I try to connect to others, I'm unable to do. I have their password and my computer SHOWS I have a connection, but actually I'm not. When I try to connect to the Internet, the server is not found. I called the support/supplier for the last network owner and he told me that even if I "thought" I was online, I really wasn't. He said that it is probably a router configuration for that person that does not correspond to my computer. As I was just visiting, of course I didn't mess with their router. This happened to me twice, with once the provider is the same as mine, but the only way I could get connected with a hard link.

  So far, the only thing I did is to see if I could connect to free wireless (municipal library) and was unsuccessful. I think the problem is with my settings, but am not sure. I have to be careful to change anything because I can't afford to lose my connection at home because my job depends on it.

  Any suggestions?

  Thanks for any advice you might be able to share.

  Hi, Pat:

  I am very confident that if you download and install the driver from the link below, your problem will be solved.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-99392-1 & mode = 3

  Paul

• Unable to connect to my wireless network

  I recently discovered that my wifi for vista would not connect to the internet even if the signal is 100% solid.

  My wireless House has a WEP encryption and it has already been saved on the laptop but since yesterday it ask me the WEP key when I try to connect it and wouldn't connect even if only the WEP pass has been entered correctly. The message that usually appears at the end is "windows is unable to connect, try the other network", even when I tried my companion's unsecured network.

  Here's what I did so far, but without success...

  I checked the Wireless driver from Device Manager and it works properly. I even try to update the driver and received a message that the driver is 2-update.

  Here's what I got when I tried to use "ipconfig/all".
  ..................................................
  Windows IP configuration

  Name of the host...: AZOU
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8187B Wireless 802. 11b / g 54Mbp
  s USB 2.0 network adapter
  Physical address.... : 00-22-5F-36-AE-19
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : Belkin
  Description...: Realtek RTL8102E Family PCI - E Fast Ethern
  and NIC (NDIS 6.0)
  Physical address.... : 00-1E-33-7A-3C-AE
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::1ad:202c:5412:8070% 10 (Preferred)
  IPv4 address...: 192.168.2.35 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: May 2, 2009 19:58:15
  End of the lease...: June 9, 2145 03:09:10
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DNS servers...: 192.168.2.1.
  194.168.4.100
  194.168.8.100
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  ... Description: isatap. Belkin
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  I can use the Ethernet cable to connect and this is killing me lol seriously... can anyone pls help me, I want to get this working wireless!

  Thank you

  Hello!

  What computer Toshiba laptop and OS do you have?

  In your case, I would check the Web from Toshiba site for an update of the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you tried to reset the router? Unplug the AC adapter from the router, wait 5 or 10 minutes and then try again.
  Another laptop works on the router?

  Good bye

• When you use private browsing, your web history is connected to your wireless router?

  I know that during private browsing, even if your browser does not save history, passwords, etc., that your browsing history may be followed by Web sites and your ISP. When in private browsing mode, your browsing history is getting connected to your wireless router?

  Yes, PB has no effect on the information stored in a journal of router.

• Satellite Pro L300-1 b 9 cannot connect to my wireless router

  Hello!

  I activated the nw wireless on SAT L300 PRO 1 b 9 - but with a lot of struggle...
  First I had to find the switch to turn on (I never got :-)).
  Then I had to uninstall Atheros Windows and set flags on (activate) in the Windows driver.

  But in Linux and Windows, I couldn't connect to my wireless router.
  My luck was that some of my neighbors have a wireless network security-disabled, open, I could map to test.
  The test was succecfully with this network, but my wireless router was inaccessible.
  The other machine I could reach it.

  The result was:
  If I set the router to broadcast the SSID, the two OSs (Ubuntu + Windows) can use the wireless network.

  But if I turn off the broadcast (to protect my router), the network driver is unable to use my router, it does not matter I set the SSID...

  A router is WRT54G, and he works with other computers if I hide the SSID, but as Satellite Pro L300 unable to connect (with this option).

  Someone knows why? What should I do to I could hide the SSID to the bad guys?

  Thanks for any help!

  With regard to:
  DD

  I put t know what Windows operating system you use, but if you use original Vista, I think that, good WLAN driver is part of the package. For the wireless network adapter must be properly installed.

  It is not easy to say what the problem is here, but if the laptop can see and detect your WLAN network side laptop computer s everything should be OK. Try to reboot your router and check all the settings.

  In my opinion, there is a problem with the WLAN settings.

• I have a laptop Windows XP and win7, connected via a wireless router.

  I have a portable desktop and win7 winXP connected via a wireless router.  Can see the XP machine with the file full access Win 7 but not vice versa.  On XP, clicking on C: of the laptop gives error "C: is not accessible. You have no permissions... "How can I fix it?  As far as I can tell all together relevant upward is correct on Win7.  No password have been set.

  Hello

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">