Distiller composefont PostScript error

Similar Questions

• I get an error invalidfileaccess when distilling an Adobe Distiller XI postscript file

  Here's the log after the failure of the attempt:

  %% [ProductName: Distiller] %.

  %% [Error: invalidfileaccess;] [OffendingCommand: file] %.

  Battery:

  (w)

  (XSFT01.img)

  / Who cares

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  Same postscript file distilled very well in earlier versions, so I think it has to do with the latest version of Adobe.  Tried the parameter f without success.  Few postscript files are working very well.

  I also notes that, according to the documentation, the TEMP folder is writable. Maybe if you set TEMP under the current folder in the shortcut, and execute a file from there, it will work. Clear your error it tries to write a 'XSFT01.img' file in the current folder.

  Worth a try.

• Distillation/Printing Postscript files with TrueType fonts

  We have the possibility to include marketing inserts full pages (PDF format) in our documents/letters. These inserts put in the full postscript file that we send to a printing facility to print and send.

  Whenever a new insert marketing is created, I run an audit before the flight custom to ensure that fonts are included and transparent do not exist.

  The thing is, we use a few printing facilities, they have printing problems of resources/PDF files into postscript that have TrueType fonts. I also see some errors when I try to distill files with TrueType fonts: "Impossible to extract the embedded police 'JOLMKC + Times-Roman'."  Sometimes, I can edit the PDF to convert Type 1 fonts, but not always. Is it possible to convert TrueType to Type 1? Why TrueType fonts do not work? I did some research, and everything I've read says that TrueType fonts should work in postscript.

  Any help would be appreciated!

  What I use:

  Adobe Acrobat Pro XI

  Windows 8.1

  Police of example I used with the error:

  Times-Roman (embedded subset)

  Type: TrueType

  Encoding: Ansi

  It also came with Arial:

  ArialMT (embedded subset)

  Type: TrueType

  Ansi encoding

  Fix. In my view, that the file PDF is turned via Ghostscript.

  I did eventually find out using Adobe Acrobat 9 (only tried the reader, not Pro), I got all the fonts to Type 1 fonts. I followed the exact same steps as I did in the 11. I don't know if they both incorporate different ways, but each time I have incorporate into 9, it incorporate all Type 1 fonts, not just some of them such as 11.

  I get more concrete information on the technical process, but at this point, I have solved my problem. Thanks for the offer of help!

• error trying to create PDF via Distiller indd files

  %% [Error: undefined;] OffendingCommand: Ioo fa½1icþt· DOCUMENT p] %.

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  How to fix a undefined error?

  It looks like what you were doing was trying to run distill directly on a document .indd InDesign file. Who will absolutely not work. Distiller processes only the PostScript (.ps) and Encapsulated PostScript (.eps) files.

  The appropriate method of creating a PDF file from an InDesign document (no matter whether someone else can advise you) is to open the InDesign (.indd file) document in InDesign, and then use the function export, Save as PDF (print), by specifying the name of the destination file (and directory) as well as the appropriate options (generally PDF/X-4 parameters or printing of high quality performance best results for most of the cases).

  -Dov

• Adobe Distiller on Mac in error %% [Error: undefined;] [OffendingCommand: PK] %.

  Hello

  I'm trying to convert my book in PDF format using the parameters provided by the manufacturer of book.

  The problem is, whenever I load any Word document created on my Mac using the word worm 15.19.1 (which is the last), I get the following error:

  Distillation: Document1.docx

  Start time: 2016/03/01 at 19:08

  Source: /Users/leighmorum/Downloads/Document1.docx

  Destination: /Users/leighmorum/Downloads/Document1.pdf

  Adobe PDF settings: / Users/leighmorum/Library/Application Support/Adobe/Adobe PDF/Settings/Lulu.joboptions

  %% [Error: undefined;] [OffendingCommand: PK] %.

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  Distill time: 0 seconds (00:00:00)

  End of job *.

  Thanks in advance for your suggestions!

  Yes, very simple.

  Distiller converts PostScript files to PDF. It is impossible to convert Word Documents to PDF files. You got an error because you tried to feed to distill a .docx instead of a PostScript (.ps) file file.

  You create a PDF from Word of in Word itself of the print dialog box by using the Adobe PDF option (at the bottom of the print dialog box).

  -Dov

• Distiller error

  I get this error when you perform a batch conversion of Word documents to PDF (dragging to distill)

  %% [Error: undefined;] [OffendingCommand: PK] %.
  %% [Flushing: rest of job (end of file) will be ignored] %%.
  %% [Warning: PostScript error.] No PDF file produced. ] %%

  I'm on Windows XP Home Edition with distilled 8.1.2, documents created in word 2003 or word 2007 (doc and docx). I have Word 2003 is installed with the Converter Word 2007 add on.

  Distiller cannot convert Word documents. Distiller converts PostScript to PDF.

• When I print a html to PDF, it displays an error called "SegoeUISymbol not found, using mail.", may I ask how to solve?

  The error message:

  %% [ProductName: Distiller] %.

  %% [Page: 1] %.

  SegoeUISymbol not found, by using the messaging service.

  %% [Error: invalidfont;] [OffendingCommand: show] %.

  Battery:

  ()

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  The problem is probably due to the printer driver options set by default for the printer PostScript of PDF from Adobe driver instance.

  To resolve this issue, quit programs and go to the Adobe PDF printer Properties . On the Advanced tab, press the button default printing . Select the Adobe PDF settings Look for option rely on system fonts only . Uncheck this option. Then press OK. Select the general tab, and then press the button Preferences . Still once, select the Adobe PDF settings Look for option rely on system fonts only . Uncheck this option if it is not already unchecked. Then press OK and click OK again.

  This should fix the problem. Please report back with your results.

  -Dov

• Map explanations ArcGIS - LimitCheck error - PDF please?

  Hello world

  I try to print to PDF from ESRI ArcMap.  There are 5 cards very complicated A0.  I could use the export function, but it doesn't produce good results.

  When I try to print to PDF, I get the following error:

  %% [ProductName: Distiller] %.

  %% [Error: limitcheck;] [OffendingCommand: eoclip] %.

  % [Flushing: rest of job (end of file) will be ignored] %%.

  % [Warning: PostScript error.] No PDF file produced. ] %%

  I'm now trying to figure out a few things.  When I bring the dialog box Format PDF printing, (I'm posting below), I get a number of options and I wonder if people could shed light on the printer engine selection and mean it?  If someone can advise on the above error and how can I solve this would be great.

  
  Thank you

  If

  

  A limitcheck error indicates the buffer data are too complex for the PostScript interpreter to deal. "eoclip" means that you have curves with too many points, and it is, unfortunately, a common problem with maps. You need to talk to ESRI - it is their dialog, nothing to do with Acrobat.

• Convert the old Postscript files to PDF

  I have some old files that I need to convert to PDF.  I think they are postscript files, but they have no extension.  They were created on a Mac in 1991.

  %! PS-Adobe - 2.0

  %% Title: ChtoCh 1-38 (WP)

  %% Creator: works

  %% CreationDate: Saturday, November 9, 1991

  %% Pages: (atend)

  %% BoundingBox:?

  %% PageBoundingBox: 18 8 594 784

  Percent for: JMP

  %% IncludeProcSet: "(AppleDict md) ' 68 0"

  %% EndComments

  %% EndProlog

  % BeginDocumentSetup

  Start MD

  I am currently under OSX 10.8.5 I tried to open it with Acrobat Pro and Distiller.  I also tried adding the .ps extension.  Had this error:

  Acrobat Distiller 10.1.9

  Start: Friday, February 21, 2014 at 2:39

  Adobe PostScript software version: 3018.101

  CID supports initialization of library is complete.

  Error in/Library/Application Support/Adobe/Adobe PDF/Settings/PDFX4 2008.joboptions:

  / CheckCompliance out of range

  Distillation: PostScript POP II 23-41

  Start time: Friday, February 21, 2014 at 2:41

  Source: Diskettes downloads/Old Mac DD - transfers completed/2014071 Johnson/originals/II POP POSTSCRIPT/PostScript II POP 23-41

  Destination: Floppy downloads/Old Mac DD - transfers completed/2014071 Johnson/originals/II POP POSTSCRIPT/PostScript II POP 23 - 41.PDF

  Adobe PDF settings: / Library/Application Support/Adobe/Adobe PDF/Settings/Standard.joboptions

  %% [Error: undefined;] [OffendingCommand: md] %.

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  Distill time: 0 seconds (00:00:00)

  End of job *.

  Online converters also missed.  I've read about software called Ghostscript, but I don't have the slightest idea how to run.  It is obscene complex.  Something that has to do with the Homebrew, X 11 and MuPDF...  I struggled with him for a few hours, but I'm out of my depth.  It seems that you have to be a programmer able to read the FAQ...

  %% [Error: undefined;] [OffendingCommand: md] %.

  The above error is caused by the line:

  Start MD

  Since the md is not defined

  Unless you cut the ProcSet from your post, it should be listed under:

  %% IncludeProcSet: "(AppleDict md) ' 68 0"

  See http://www.lbl.gov/IT/CIS/dp/samples/jobtag.fac between the 2 following lines:

  %% BeginProcSet: "(AppleDict md) ' 68 0"

  % EndProcSet

  Another option is to cut the lines of code associated with md or define your own md as a no - op

• Print PDF from InDesign error

  Tried to print a 15 page InDesign document to PDF. The following error message was rerturned:

  -----------------------------------------------

  %% [ProductName: Distiller] %.

  %% [Page: 1] %.

  %% [Page: 2] %.

  %% [Page: 3] %.

  %% [Page: 4] %.

  %% [Page: 5] %.

  %% [Page: 6] %.

  %% [Page: 7] %.

  %% [Page: 8] %.

  %% [Error: ioerror;] [OffendingCommand: readstring] %.

  Battery:

  (Poeskon Μdy5ae2 › ¢ ÷fmo-Eioyj)

  øR½ = Ö¤ %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  ----------------------------------------------------------

  I can go directly from word or scanning of documents in PDF format with no problems. However, I noticed that I have two instances of Acrobat Pro 11 under installed programs.

  1 adobe Systems, installed 14/05/2013, 1.93 GB, version 11.0.00

  2 adobe Systems Incorporated, version 14/05/2013, 1.85 GB, 11.0

  Maybe it's originally a sort of conflict but that you remove?

  Help, please.

  We need more information. What version of ID (including the updates installed)? What OS?  What are the settings?

  Why do you want to print to PDF instead of export? You lose a lot of distillation.

• Error: invalidfont; OffendingCommand: xshow

  It's a pain using Acrobat to print a word in pdf format. Otherwise, I use PDFCreator to solve the problem, who can not Acrobat PDF Printer.

  Error message:

  %% [ProductName: Distiller] %.

  Cambria found, using Courier.

  %% [Error: invalidfont;] [OffendingCommand: xshow] %.

  Battery:

  [45 46 93 46 74 82 45 37 92 34 92 0]

  ( ??

  ?????)

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  Environment:

  OS: 8 64-bit windows

  Office: Office 2010 64 bit

  Word docx: 222 pages with photos, fonts include Cambria, Times New Roman, and Courier.

  Acrobat: Acrobat 9 PRO Extended (version 9.0.0)

  I tried the following:

  1. open Acrobat Distiller-> font settings, remove all the fonts except the one with "Resource\font". Closed the dialog box and reopen the Distiller. I don't see any sign that Acrobat Distiller tried searching the entire hard drive for fonts.

  Please advice, thank you! FYI, PDFCreator works well in this case.

  So the bottom line here is that Distiller cannot find Cambria. Distlller is not to search the entire disk for fonts - do not know why you think he would, because you must add the directories of fonts to remove them can only improve this problem - only worse. Try to add the specific font directory that contains Cambria.

• Error to distill PDF

  I tried helping my colleague to solve the error Distiller in vain for the day of class below.  When you print a PDF with tags and bookmarks, the pdf file gives an error in Notepad and the pdf fails to print.  I searched forums and have found other people with similar problems, but no answer on how to solve this problem.

  The really weird part is that I can print out the pdf very well from my computer, but my colleague may not print the same book file in PDF without the error.  I would just print the file for it, but there are several other similar to print, and they all produce the same error at the same place.

  I guess there must be some setting that is different on my computer, even if I can't find that whatever it is the different value in FrameMaker.

  If anyone has any suggestions, or knows how to solve, would be great!

  Here is the error message that appears in Notepad:

  %% [ProductName: Distiller] %.

  %% [Page: 1] %.

  %% [Page: 2] %.

  %% [Page: 3] %.

  %% [Page: 4] %.

  %% [Page: 5] %.

  %% [Page: 6] %.

  %% [Page: 7] %.

  %% [Page: 8] %.

  %% [Page: 9] %.

  %% [Page: 10] %.

  %% [Page: 11] %.

  %% [Page: 12] %.

  %% [Page: 13] %.

  %% [Page: 14] %.

  %% [Page: 15] %.

  %% [Page: 16] %.

  %% [Page: 17] %.

  %% [Page: 18] %.

  %% [Error: undefined;]  OffendingCommand: pdfmark; [ErrorInfo: Rect] per cent.

  Battery:

  / ANN

  / Link

  / Subtype

  /M12.9.17790.Heading1.10.Appendix

  Q:

  / GoToR

  / S

  / Action

  / Type

  dict-

  / Action

  [0 0 0]

  / Border

  [7841 11098 8119 10875]

  / Rect

  -brand-

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  According to Sheila, this specific problem has been experienced with the initial version of FrameMaker 8.0 (FM8.0p236) and the FM8.0p266 fixed.

  To apply the hotfix, select help > updates in FrameMaker. Latest version of FrameMaker 8.0 is FM8.0p277.

  Shlomo Perets, http://www.microtype.com

  FrameMaker & consulting training

• LaserJet 4100N: Laserjet 4100N syntax error

  Until yesterday my Laserjet 4100N was printing fine on my 64-bit Windows 8.1 office. Today, it prints a number of pages that are empty or with an error message like "Syntaxerror."... The offending command:.  fl  (  ... Operand Stack: 85 "or an empty string of similar meaning. Sometimes a part of requested printing come there, too, but often not.

  I have tried rebooting the desktop computer and printer many times - no change.

  I tried to uninstall the printer and reinstall via Windows - no change.

  I tried to download and install the HP Universal print driver each available in three versions:

  PostScript December 11, 2014 - no change

  PCL 6 - Donna PCL XL Error

  PCL 5 - does not print the document requested

  Help, please!

  Could be a fault of the driver, or intermittent corruption by the hardware, or (as explained in http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/M175Nw-PCL-XL-errors/m-p/4940252 ) the result of a recent update for AVG anti-virus (which seems to have corrupted the output of different drivers, generating many XL PCL or PostScript errors or otherwise just to print (depends on the Language of Description of Page / driver is currently in use)).

• Error in creation of the pdf of the printed word in all browsers with Acrobat DC

  Following message when I try to print pdf in IE, Firefox or Chrome more MYOB software

  %% [Error: invalidfont;] [OffendingCommand: findfont] %.

  Battery:

  / Police

  (Mail)

  /convoyeur

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  Windows 7 64 bit 16 GB of ram

  Any way around this? Never had problem with IX

  Thank you

  Richard

  Hi Richard,

  The "findfont" offending command indicates that there is a problem with the specific font or text element.

  You should perhaps consult the doc KB link mentioned below and try the troubleshooting steps:

  Troubleshooting PostScript errors

  Let me know if it helps.

  Kind regards

  Ana Maria

• Strange encapsulated postScript

  I just got a few images for a website of a manufacturer. It's an Encapsulated PostScript. When I try to open it with AI it tells me that the file is unknown.

  If I try to open it with preview I receive the downloads window with ' % '. WARNING: Postscript error. Produces no pdf | %% »

  I've not seen this before if someone could explain to me how to open it?

  Nobody reads the number 2 of the answer.