DM 4.0.0.833 and synchronization with the data-> TABLES DROP dictionary

Similar Questions

• Work on 2 computers and synchronization with the mobile WARNING LR

  Hello

  I keep a copy of LR on a laptop and desktop, I keep my LR catalog and the library on an external drive. I also synchronize with LR Mobile. When I get out of my office, I get a message saying that x number of photos are always sync. I do not get this message on my laptop. Synchronization on my desktop does not start unless that delete all my data synchronization. It will be just me to get the same message on my laptop. So, I know why this is happening but I do not know how to solve. I would like to continue the synchronization via my laptop. Is there a way to tell LR on my desktop to ignore the mobile synchronization.

  If the solution is to load LR from my external hard drive, which causes a problem with creative cloud and update software? I also have Photoshop on both computers.

  Thank you.

  Try hovering over the plate on the desktop and click the menu drop down. In Control Panel, you can pause sync from your desktop.

• Virtual copies are not synchronized in a second Lightroom Catalog even if the metadata are written in XMP and synchronization with the metadata has been selected

  Dear community,

  I use a Mac with 5.7 of Lightroom which is configured to store all the metadata in the xmp files. The Lightroom Catalog is stored locally on the Mac and contains only references to images and their xmp files that are stored on a network device. There is another Mac with the same setup with a local separate Lightroom Catalog and access to the same images on the network device.

  At a starting point, the two Lightroom catalogs are identical - they refer to the same images on the network device and contain the same metadata.

  When I update the properties of the image on the first Mac, these changes are reflected in the xmp file. After using the option 'synchronize' with activated "metadata synchronization" on the second Mac, the modified image properties are visible on the second Mac. It is very good.

  However, when I create a virtual copy on the first Mac, I realize that the corresponding xmp file is updated. However, even after the synchronization, the virtual copy is not visible on the second Mac. I can change the properties of the image of the original image and get these changes replicated to the second Mac, but the virtual copies remain the first Mac.

  What should I do also virtual copies get synchronized?

  Thank you very mich for your support.

  Best regards

  Peter

  However, when I create a virtual copy on the first Mac, I realize that the corresponding xmp file is updated.

  As far as I know, xmp does not contain information about the virtual copies. If this method to attempt to synchronize two catalogs will not work.

  Better you should use the file-> Export catalog on a single computer and then file-> import from another catalog on another computer.

• Work with the timeline and synchronization with the music

  Greetings!

  I'm trying to synchronize the animation with a piece of music and I'm running into difficulty working with the scene.

  I can create a layer, import a song file, it appears as a wave sound and even shows where the music ends. My problem is that when I use the key entry to play the animation, when I try to stop the animation timeline stops, but the music stops of will and I either have to wait for it to terminate or change the synchronization setting stops, which removes the Visual sound wave.

  I'm used to working in Final Cut, where I can stop and start several times - is there a way to do this in Flash?

  Flash CS5 (11.0.2.489), 21.5 iMac, 3.2 GHz, 8 GB RAM 10.6.6

  Thanks for your time!

  assign property sync of its flow.

• Delete and synchronize with the new iTunes library

  I recently got a new MacBook Pro and put in place a new iTunes account using my apple ID. I was previously using a PC computer and buys a different apple for iTunes id. My phone is synchronized with the computer and transferred all my purchases to my computer, but not my apps. But now it is said to bring anything to my new iTunes, I need to erase and sync, then I can put on the new iTunes things. It is said that it can only be synchronized an iTunes at the same time, but what is it clear? If she will take just the back upward, that's fine. I'm just confused about what is clear and what will happen if I clear its contents. Any help is appreciated.

  sbe1998 wrote:

  I recently got a new MacBook Pro and set up a new iTunes account using my apple ID. I was previously using a PC and buy a different apple ID for iTunes.

  Why did you create a new AppleID?

  You can't transfer purchases to the new AppleID.

  You can update old AppleID if you have the new email address.

  Just copy the entire folder/iTunes / / Music from PC to Veronica on your Mac.
  That's all you need to do.

• Question "BOLD" of blackBerry Smartphones and synchronization with the new Media Sync for Mac

  Someone at - he had problems with the new media manager not achievements the media in the "BOLD" card, it worked for my curve but not the "BOLD" it says for me to insert the press card. I tried formatting, but still used hired there is one in there to transfer my iTunes. Any suggestions?

  I just tried sync'ing a playlist from iTunes to my "BOLD" w / Media Sync and it worked fine. I don't have a memory card either. It took two trials - the first doesn't seem to work, but the second went without a hitch. You have your "BOLD" value will automatically switch on the mass storage device when connected to your Mac - I do not know if it would make a difference.

• TimesTen synchronize with the compressed table OLTP

  Hello

  We examine the use potentially TimesTen as a frontend for our Oracle database database. Database is at version 11.2.0.3, and large number of tables in the databases is compressed OLTP (Advanced Compression). Synchronizes with compressed table supported?  Are there any known issues, what to do?

  Thank you

  George

  Yes it's fine, no known problems.

  Chris

• Related to images of a table showing visted and play with the whole table

  Help please.

  I've never had this happen in another version of dreamweaver.  Using dreamweaver CC now.

  I have an image created in photoshop. cut into slices. load the HTML and images in dreamweaver.  Dreamweaver then creates a table.  If I download just as, the site looks good.  Once I choose a slice of the image, create a link to it and then to download the site, there is a purple border around the image so ruin my entire table.  The site shows the breaks between each slice of the image.

  Thank you

  The only real advice I can give, which will help you in the long run, would be to take some time to learn at least the basics of html and css. How to Photoshop to do will almost always blow your site to pieces as soon as you start editing content around. To create professional sites with DW, you need to understand HTML and CSS (and to a lesser extent, javascript). However, without a solid understanding of HTML and CSS little issues like the problem of border IE can become huge problems.

  There are tons of places online to get tutorials on that, personally, I like the following links for the basics...

  HTML: http://w3schools.com/html

  CSS: http://w3schools.com/css

  Once you understand what is happening behind the scenes of DW, it is much easier to work with the program. Once you understand how to work with code, the program gives you, you can let Photoshop do the work, that it was designed for, image manipulation.

• Buffer and relate with the single table

  I have a table with a geometry column representative plot information with the shape of the plot. I need to write a query that will select 1 or more packages in this table based on the ID of the plot, but also select all parcels less than 300 feet of those selected.
  
  So just now, I have something like this example to select plots according to their ID:
  
  SELECT PARCEL_DATA. ADDRESS,
  PARCEL_DATA. CITY,
  PARCEL_DATA. STATE,
  PARCEL_DATA. ZIP,
  PARCEL_DATA. AFN
  OF PARCEL_DATA
  WHERE PARCEL_DATA. AFN IN ('6465 ', ' 4654');
  
  I don't know where to go here to select also the plots of less than 300 feet from each of these 2 that are already selected. I tried various queries by using SDO_BUFFER and SDO_RELATE, but nothing has worked. Any help would be appreciated.
  
  The below query works, but only for a digital CAMERA. If I add several APNs to AFN (...), I get the error "ORA-01427: einreihig subquery returns more than one line. I need to work for many, not one. Any ideas?
  
  SELECT PARCEL_DATA. ADDRESS,
  PARCEL_DATA. CITY,
  PARCEL_DATA. STATE,
  PARCEL_DATA. ZIP,
  PARCEL_DATA. AFN
  OF PARCEL_DATA
  WHERE SDO_RELATE (PARCEL_DATA. FORM,
  (SELECT SDO_GEOM. SDO_BUFFER (300, 1 FORM)
  OF PARCEL_DATA
  WHERE APN IN ('6465')),
  "mask = anyinteract") = "TRUE";
  
  Edited by: Guddie on April 15, 2010 09:00

  1) hold with SDO_RELATE/SDO_BUFFER:

  SELECT A.ADDRESS,
  A.CITY,
  A.STATE,
  A.ZIP,
  A.APN
  OF PARCEL_DATA A, PARCEL_DATA B
  WHERE SDO_RELATE (A.SHAPE, SDO_GEOM. SDO_BUFFER (B.SHAPE, 300, 1)
  "(masque = anyinteract') = 'TRUE' AND B.APN IN ('6465 ', ' 4654');"

  (2) reserved for the SDO_WITHIN_DISTANCE:

  SELECT A.ADDRESS,
  A.CITY,
  A.STATE,
  A.ZIP,
  A.APN
  OF PARCEL_DATA A, PARCEL_DATA B
  WHERE SDO_WITHIN_DISTANCE (A.SHAPE, B.SHAPE, 'distance = 300') = 'TRUE' AND
  B.APN IN ('6465 ', ' 4654');

  Published by: you on April 15, 2010 12:21

• Export and synchronization with the AF sound

  Hello, program is really interesting, and I see big potential, but maybe not for my, I don't understand it begins

  I want to ask you, what I am doing wrong.

  My film animation for export and import as a wermutstrop to the FA. Animation is long 735 dng, but the sound is longer then wermutstrop dng. How can I import in the AF and sound video at the end of synchronization. I can see in Ch, the animation is just 12 fps. What I am doing wrong in AF.

  Thank you

  Hi Jan... Either use the dialog box interpret the consistent at the same rate (12 fps) film about the PNG any of the sequences, or even easier is to use the import script (file > Scripts > new host character model Recording.jsx) which makes the import and in line for you.

• How to make a video in Labview that synchronize with the case data?

  Hi guys,.

  I do a program which displays the case data from a satellite to different positions. (For example, to position more near the Sun, the temperature data are higher...)

  To make the most interesting façade, I add in a video of a satellite in orbit around the Earth. The video must synchronize with the data that I show.

  My satellite orbital time is 90 minutes = 5400 seconds. If I use the method of control of ring photo, I have to import 5820 photo frames in the control of ring image. My understanding is that every time that the user can import an image (correct me if I'm wrong). That would mean that I have to import the photos in 5400 times.

  Is there another way to do this? I don't want to waste my time on the import of so many images.

  Vanessa

  If it's a video you have, I would have a look at the incorporation of some sort of video player in the façade through ActiveX. It is not something I've ever tried, but it should be possible and will save you having to generate 5000 + images!

  There is a resource here on the use of VLC with LabVIEW: https://decibel.ni.com/content/docs/DOC-24114

  If you can embed a video player and can be driven through ActiveX, then you should be able to do what you want!

• Loading Deskeop Palm on PC running Vista and synchronization with m130.

  No device

  I tried to install Palm Desktop 4.1.4 and 6.2 on my laptop under VISTA without success.  I can't open Destop or sync with my handheld M-130.  I installed palmhotsyncsetup.com Desktop 6.2 both Pimlico.  The Office seems to load OK but it will not synchronize with the m-130, nor it will open.  When I try to open the Palm Desktop on my laptop I get an error: module not found note pad.exe.

  Any idea.

  Tried to reinstall worm 4.1.4 as you suggested and using the procedure you referenced and found a tip for clk rt the PD icon during startup and select "Open as Administrator" and who did the trick.   PD is in place, running and sync with the m-130.  Thank you very much.

• BlackBerry Z10 configure my Outlook sync but you must disable synchronization with the sent, drafts and deleted records

  When I go into settings it greys these they are already registered.  So I chose to sync all e-mail files, assuming that I could disable the files already sampled, but it only allows me to select folders additional vs uncheck the existing folders.

  Help!

  Jason

  Hello and welcome to the community!

  To work properly and transparently, be sync these files all the time. As you write a message, it must be auto registration in the drafts folder and synchronization on the server to prevent the catastrophic device failure. Similarly, sent items must be constantly placed on your server because it is a necessary function. Similarly with the elements removed (although there may be separate issues).

  Suffice it to say that, if the box is already checked, AND it is grayed out, then you cannot affect the adjustment.

  Good luck!

• laptop do not synchronize with the desktop computer

  set my desktop to 12 + hours of synchronization. an hour ago, tried to sync my laptop to the stored data. some of the Add-ons seem to be transferred but any bookmark or scrapbook. the album, including a few hundred MB of data stored on my hard drive, I download from my office so when syncing to my laptop, download on this hard drive? same question for several thousand bookmarks I have on the desktop.
  the office is Win 7 laptop Win 8.1 (modified to mimic Win 7)
  both machines have the latest version of Firefox & updates.
  any help would be greatly appreciated.

  Cannot add the troubleshooting data, 4 734 too many characters for the position
  If necessary, can post these data in a follow-up

  Your troubleshooting information can be found by clicking on System Details more in the right column.

  I do not Scrapbook. I just installed, saved a "scrap" and do not see a reference in: config for "synchronization" of the data of Scrapbook. I don't think that extension works with synchronization.
  http://www.xuldev.org/Scrapbook/
  Please check the features 3 pages and boards online to see if there is mention of being able to synchronize data of Scrapbook. It is the developer of the extension to add synchronization functionality to their extension.

• Problem phone Motorola q synchronization with the computer

  My computer synchronizes with the Motorola Q phone, the computer is old and the phone is old window XP is outdated more some of my programs are missing also, as help and support center is it too late or there at - it some 4 HELP me? /// ...........

  your phone manual says that it syncs with windows XP?
  Have you installed the phones for this software?
  What happens when you try?
  Are you activsync installed Microsoft?