DMP4310 and Windows shares

Similar Questions

• How to share files between Windows XP and Windows 7 without password?

  Hey guys, I want to share files between windows 7 and windows XP. I don't want to put the password on my Windows 7 or Windows XP account. I am going on my Windows XP perfectly shared files from Windows 7, but I am not able to go on my files of windows 7, the cause of my XP he asks user name and password. I enter the user name and it does not accept it if I make a password for my windows 7 and enter as the user name... I don't know what to do guys any help?

  Windows 7 only WILL NOT allow you to share files without a password, it's all just a common sense safety requirement.  It of a very bad practice to run your Windows installations with a null value, a password, give your facility a valid password.

  The simplest around your problem is to create an account with the same names and passwords on each machine and so typed the password when the connection is too a problem allow AutoLogon on the machines.

  John

• I need to share files between windows xp and Windows 7

  I am unable to share files between Windows XP Home Edition and Windows 7 Ultimate edition

  I have a wireless router and my two computers are connected on it.

  Please give me detailed guidelines on how to share files between them.

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response. MS - MVP - Elephant Boy computers - don't panic!

• I have win 98se, win xp sp3 and Windows vista 64 bit, I want to share printer files

  I have win 98se, win xp sp3 and Windows vista 64-bit PCs, and I want to share files & printer... printer is connect in xp or 98se, well, what is possible... currently, I've got these between vista and xp, which is available when win 98se involved?

  Two ways are participatory computers in a windows environment, a working group and a _.   You can fill in the blank?

  Virtual private networks have little to do with the domains or working groups.

  I don't think that WIndows 98 can join to a domain.  All versions of WIndows, you mention should be able to participate in a working group, however.

  In my opinion, the best way to share a printer is to use a printer connected to the network

• How to share files betwem Windows 7 and Windows 98?

  Original title: connection to bridge Windows 7 with Windows 98 Via Ethernet

  In advance, I apologize for my bad English. This is my 3rd language.

  I have two machines beside others, each running windows 7 and the other with Windows 98.

  The computers are connected via Ethernet. (the drivers for the PCI ethernet on the windows 98 computer are present and running)

  And no matter what I try. I can't get the internet to work! whenever I start the machine. (log in screen). I get a message box that appears and says:

  "The following error occurred while loading protocol 0.

  "Error 59: a network error has occurred."

  And when I click OK it brings me to the login screen.

  (the machine has never been yet on internet, but has tons of drivers and programs on it)

  Any help is very appreciated! Thank you!

  Hi Jack,

  The fastest way to share something is using the new share with menu. See the following links to learn more about sharing.

  Share files with someone.

  http://Windows.Microsoft.com/en-us/Windows/share-files-with-someone#1TC=Windows-7

  The networking a Windows 7 and a Windows 98 computer.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/networking-a-Windows-7-and-a-Windows-98-computer/6d26ac72-d367-4731-abb4-e8681e1327c7

  Please let us know if you need assistance.

• How to separate my Windows 7 libraries/Homegroup and Windows Media Center the share permissions?

  I used to share media from my laptop Windows 7 for my Xbox 360 and my Windows XP computer using Group residential and everything was great, but I decided to use WMC so I could see more files on my Xbox 360.

  But after you have configured the WMC as Xbox 360 Extender, it reset my permissions and locked the folders that I was sharing with homegroup. After you have unlocked records, he deleted all the files in my library, and anytime I want to share a folder with the homegroup, its in my list of WMC,.

  Whenever I remove a sharing folder in WMC, it resets my home group and locked files. I don't want that.

  At any time, I share a folder to my homegroup, sharing in Windows Media Player (it's a NO!) I don't want that at all)

  WMC can sometimes have trouble sorting files when its comes to 100 and 1000 s, I want to keep my Homegroup library and my library of WMC separate share. Which means I want my homegroup, my library and Windows Media Centers, sharing folders, all sharing the same folders.

  How can I do this?

  Hello

  I suggest you to check the suggestions of the binding.

  http://experts.Windows.com/w/experts_wiki/use-HomeGroup-with-Windows-Media-Center.aspx

  Hope the information is useful.

• Secondary disk between Linux and Windows guests share

  Hi guys,.

  I have a requirement to have a guest Windows and Linux comments share the same disk (formatted in NTFS) and the two systems need full access to the shared file system.

  What I've read, it is possible in some cases, such as the Windows Server cluster.

  Has anyone tried this with Linux and Windows?

  
  Thank you

  What I've read, it is possible in some cases, such as the Windows Server cluster.

  Windows uses a cluster without sharing, wherever a single node has access on the drive shared at the same time. Microsoft does not support concurrent access to an NTFS file system, with the exception of Hyper-V.

  André

• How to share a partition between El Capitan and Windows 7

  Hi all

  You are looking for assistance.

  I'm relatively new to Mac OS and you want to configure a MacBook with El Capitan and Windows 7, with or without boot camp. I have a 1 TB SSD hard drive, where I want to divide it into 3 partitions with the following:

  200 GB Mac OS partition

  Score of 200 GB Windows 7 OS

  600 GB shared partition accessible between the 2 operating systems.

  Whenever I have set the shared FAT32 partition it would either mess boot camp install Win7 or boot camp Win7 will not install unless the FAT32 partition is removed. I even installed Win7 without boot camp and the shared partition is safe on Mac OS, but not accessible in Windows.

  Hope that all makes sense. Help will be very appreciated.

  Thank you in advance.

  1. in what year is your MBP?

  2. you can

  a. either manually partition and create the partitions you need, if you need to use Bootcamp, or

  b. install W7 as virtual machine and VM engines will allow you sharing (reading / writing) between the two file systems.

  3. There are many variations to two models of same. W7 and year of Mac are the main limiting factors for your disk formatting.

• We can establish a common partition for Mac OS and Windows Boot Camp

  I'm new to Mac, so please excuse my ignorance.

  I have a MacBookPro 11 mid-2015 with 512 GB SSD and 16 GB of RAM.

  I have Mac OS X El Capitan and that you have installed 10 Windows using the Boot Camp utility on a 150 GB partition. I wanted a common partition on exFAT which could serve as a repository for my data either of the OS. My intention - 150 GB for Mac OS - 200 GB of data - 150 GB for Windows 10. How can this be achieved?

  Earlier, after the Boot Camp, I reduced the Mac OS to 350 GB partition to 150 GB and released 200 GB. Formatting this turned me expensive because it stopped my Windows to start. Repair it was a waste of time and effort. I draw the hard Windows on a Mac is sensitive to changes in the partition.

  In addition, is using Virtual Box better than Boot Camp? I don't have as much virtualized environments.

  Please advice.

  You can connect an external drive of ExFat formatted. The OSX and Windows can read/write on a disk formatted ExFat.

  A virtual machine has its advantages, as does a Boot Camp facility. A virtual machine allows the simultaneous OS, any necessary initialization to change operating systems. Data can be shared between operating systems more easily. Computer such as memory resources are shared in a VM for applications environment to run slower.

  Installation of Boot Camp allows Windows to run in native mode by using all of the system resources, so apps will go faster. But to change operating systems, a reboot is required. It is more difficult to share data.

• Desktop SMS and Windows Mail are not working together

  Hello

  thought I'd post here here as having a few issues with my Windows Mail but my desktop computer suffers the same problems and on a Vista forum where I posted my problem a few very useful told me who to try to solve the problems.

  One of them suddenly realized I had said my laptop is a Toshiba, and apparently the Desktop SMS and Windows Mail are not working together so that the person suggested unless I use it to uninstall apparently amongst the technically trained its known that these two programs do not like each other and explain why my office is not the problem but the laptop don't.

  After you have reset the Touch of Windows Mail (tutorial on a site http://www.vistax64.com/tutorials/ vista) wood don't be put off by vistax64 as site 32 and 64 and followed great reset Windows Mail from Brink (do not restore all mail) then uninstalled Desktop SMS and touch of the drink no more mail questions that gave me problems almost every day with marking than reading/sending project messages.

  So had to click forward then remove those bits and complete the email to send and touch wood since doing these two things as soon as send an email to the box shipment or project to obtain the number of emails in parentheses, whereas before it wouldn't happen unless I closed the program and then reopened.

  Hoping that these solutions have solved my problem and wanted to share it with someone else who wants to read this thread and you recommend Vista 64 because they are all very useful there and speak in non-technical terms for those of us not technically trained.

  Debbie

  Thanks for this piece of information. Should be useful for some of us.

• MPB early 2011 and Windows 10 perfect work!

  Dear all,

  I would like to inform you all that I own a MBP E2011 and Windows 10 running with no problems. I have my MBP for 2011 and start with a Boot Camp Partition with Windows 7... After a few years, it has been improved to 8.1 and even 10 windows worked. Recently, my HARD drive has been damaged and it seemed that it was impossible to reinstall Windwos 10.

  Over the years, I have replaced a malfunctioning optical drive with a hard drive, and very recently I bought a second SSD and installed Windows 10 as a second operating system (SSD1: El Capitan;) SSD2: Windows 10).

  It took me almost 1 week solving together unnecessary complex method, because I met a number of errors by setting up a Bootcamp partition that is appropriate;

  -due to the missing optical drive, bootcamp should be changed to allow you to boot from USB. (I needed to do this because I used a bootable USB key, but if you have the work of optical drive, you can

  The original Bootcamp in El Capitan is unable to create a partition on the disk (Windows cannot be installed due to the wrong table formatting of disk and partition. Windows 10 requires of TPG, and it is not performed correctly. After fixing the price at the end of the windows 10 installation, an error has occurred: Windows cannot change the boot configuration "I tried referred questions on the forums and nothing worked.»

  -

  So I would like to share my solution to avoid that your productivity is affected in the same way as mine...

  -Download the original Win10.iso

  -Download the drivers from bootcamp support (I used the boot camp for this wizard, you need this because the wifi does not work after bootin in windows, the first time).

  I forgot all of the Bootcamp Assistant program. I put my new SSD in a computer windows laptop, downloaded WIndows 10 ISO original key and activation. I made a bootable USB key which is containing an EFI bootloader. I installed Windows on the SSD and after 10 (before making any personal changes in the installation of Windows 10 I turned off the laptop and put the SSD in my MBP.)

  -J' I started directly in Windows and finalized the installation and settings of Windows

  -J' installed the bootcamp drivers (the only driver who did not was the audio drivers realtek; via the Task Manager, you can close it and the rest of the drivers will be installed correctly.) (audio working properly).

  -After, I activated my Windows 10

  -Everything works perfectly... keyboard, brightness... and put into operation in about 8 seconds...

  So... to avoid a lot of problems with the new Windows on your Mac. .. Instead, above. I took me more then 35 hours to install everything the official way and to be honest, I can't really fond way that this process has become so terrible complicated...

  Good luck with the creation of your 'Boot Camp'

  The purpose of these forums is to helps solve technical problems from other users. It is not a billboard for General announcements. We are glad of your success, but this isn't an appropriate place for it.

• Y480 mSATA and windows 8

  I just got a y480 with. Disc 1 to and Windows 8. I installed a crucial 128 GB Msata ssd and it is seen by windows 8, however I want to spend my c: drive SSD and start the ssd to gain speed. I tried to use the Easeus partition master to copy the c: drive to the ssd and it succeeded, but I can't boot from it. Someone at - he succeeded in this and can share the best method? I just boot from SSD. What is the best method to clone for my case. Free preference

  I was finally able to clone my hard drive to an mSATA SSD Crucial. I tried several different approaches to farstone drive clone 8, partition master 9.1.1 and macrium reflect, but none seemed to work as I found myself either with a partition that would not start, or that I couldn't make it bootable. I even tried easyBCD to modify start menu options, but got nowhere.

  What I ended up doing that worked was using EASEUS Todo Backup home version to clone the entire hard drive to the mSATA SSD, taking care to ensure that I had the option optimize for SSDS box checked for destination Windows partition. Then I started the clone and when it was done I went into the BIOS by pressing F2 set the entry for the SSD to the top. Once I booted into Windows I deleted the recovery partitions of Lenovo (on the SSD, NOT the hard drive!) and the extent of the Windows partition in disk management to recover the space occupied by these... It seems to work fine...

• HP 15-AF006AX: need drivers for 15-AF006AX for Windows 7 and Windows 8 HP model

  Hello

  I recently bought two units of 15-AF006AX HP HP model and I installed Windows 7 on a laptop computer, & Windows 8 in another laptop, but do not want to upgrade to Windows 10.

  I tried to find the drivers, but it is not clearly mentioned that the drivers are for what operating system:

  http://support.HP.com/in-en/drivers/selfservice/HP-15-notebook-PC-series/7771410/model/8524986#Z7_30...

  In the details section of all drivers, it is mentioned that "the pilot is for supported operating system", but the OS is nowhere specified. I've seen lots of reviews for this model of laptop that drivers available for this model to the HP Web site are for Windows 10 & with these drivers, the laptop does not its 100% if the OS is not Windows 10.

  Please someone share me the links where I can get the drivers for this model for two OS - Windows 7 and Windows 8.

  (I guess that there are separate drivers for Win 7 and Win 8)

  Thanks in advance!

  @ashu5577: you need to look more closely at the drivers and software page.

  Just below the image of the laptop, there is a line, with a light blue background, that says "your operating system: Microsoft Windows, Microsoft Windows 8.1 and offshore at the right end of this line, the word CHANGE.»

  It shows Win8.1 for me because I am running 8.1; I'm running Win10, it would show Win10.

  You change the operating system by clicking on CHANGE and change the OS selection menu drop-down.

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• Android and Windows 8 DualBoot - Acer W700P

  Hi folks, I'm David from South America and I have this great Tablet since last year, that's great, but I would like to install android and Android, so that I can dualboot windows 8.

  I tried to install the latest 'android - 4.2.2_r1 - ia2"use"Generic UEFI Installer", I followed the steps as shown in the quick start page, but I found problems between the path, the first was a message while trying to start mode EUFI saying that the:

  DiskName % has been blocked by the current security policy

  then I read somewhere that the implementation of a supervisor password would allow me to change the settings of the UEFI, within those parameters has been an option for select trust uefi files, browsing the UEFI USB created in the quickstar page and select all the files in a folder called efi EFI, I could then start the first screen of the installer , and then you try the manual installation option gives me an error and get stuck there...

  I know that some people were succesfull install Android from the page open source intel so please could you share the steps to follow to install Android and have dualboot with the large W700

  Please share your comments, because for sure, there are a lot of people willing to try the DualBoot - Android and windows 8

  Disable your security strategy uefi on yout start menu, assign an administrator password and disable the security check. DualBOOT android AI on w700 has been done successfully.