Do not see the box "shell to grant access.

Similar Questions

• Help.Trouble with Photoshop 3d for AE. Not seeing the box keep 3d when importing. Does not load simple 3d in AE

  Not seeing the box keep 3d when importing. Does not load simple 3d in AE. (Cube simple 3d in PS. try opening in AE, but it gives me a box keep 3d to import even when the choice of composition.) Any thoughts? Thank you-kevin

  After Effects keep the Photoshop 3D layers.

• No sound icon by volume in the taskbar. Can not see the box in the Panel... areas are greyed out. has tried windows Fixit... does not solve the problem

  My knowledge is very limited when it comes to computers, and I don't have a clue when it comes to walk through the bios, etc. Can you help me in Re-establishing sound on this computer. I can assure you that your patience will be judged.

  My hard drive has been cleaned and reformatted about three weeks ago, and I have not all sounds now.

  My OS:

  Windows XP - Pro, Version 2002, service pack 3.

  Is the motherboard: Asus M2N - SLI Deluxe

  Graphics card: Nvidia GeForce 7300 SE 7200

  CPU: AMD Athelon 64 X 2 Dual Core 4200 +.

  IDE controllers: ATA/ATAPI

  Standard dual channel PCI IDE Controller GS

  I bought one online drivers scanner / program, identified the drivers missing, downloaded from nvidia and reinstalled. still no sound.

  Upgraded hardware, Device Manager, I see 3 yellow dots to mark:

  1. audio Device on High definition Audio Bus.

  Details; HUHUDIO\FUNC_01 & VEN_11D4 & DEV_198B & SUBSYS_104381F6 & REV_1002\4

  2. properties of the unknown device on PCI Bus.

  Device ID:

  ACPI\ATK0110\1010110

  3 Dell USB Smart card keyboard.

  "Thank God" Friday, December 31, 2010 11:40

  My knowledge is very limited when it comes to computers, and I don't have a clue when it comes to walk through the bios, etc. Can you help me in Re-establishing sound on this computer. I can assure you that your patience will be judged.

  My hard drive has been cleaned and reformatted about three weeks ago, and I have not all sounds now.

  My OS:

  Windows XP - Pro, Version 2002, service pack 3.

  Is the motherboard: Asus M2N - SLI Deluxe

  Graphics card: Nvidia GeForce 7300 SE 7200

  CPU: AMD Athelon 64 X 2 Dual Core 4200 +.

  IDE controllers: ATA/ATAPI

  Standard dual channel PCI IDE Controller GS

  I bought one online drivers scanner / program, identified the drivers missing, downloaded from nvidia and reinstalled. still no sound.

  Upgraded hardware, Device Manager, I see 3 yellow dots to mark:

  1. audio Device on High definition Audio Bus.

  Details; HUHUDIO\FUNC_01 & VEN_11D4 & DEV_198B & SUBSYS_104381F6 & REV_1002\4

  2. properties of the unknown device on PCI Bus.

  Device ID:

  ACPI\ATK0110\1010110

  3 Dell USB Smart card keyboard.

  Go to this page and download the drivers for your motherboard:

  http://www.ASUS.com/product.aspx?P_ID=szSFtrap7crpBaQE

  --

  Roy Smith
  Windows 7 Professional
  Postbox 2.1.0
  Tuesday, January 4, 2011 22:09:51

• HP Deskjet 1510: Printing can not see the characters in the text box

  my printer cannot print text but it prints the pictures ok

  Hi derrylahan,

  We will first determine if any black ink comes out of your printer.

  This document describes how to check the ink levels and how to print an alignment page.  You should check you have black ink in your cartridge and you should see black on the alignment page printing.

  http://support.HP.com/us-en/product/HP-DeskJet-1510-all-in-one-printer-series/5157551/document/c03803074/

  If you do not see the black ink on the page, you should do a cleaning of the cartridge.

  If you still haven't black ink, you may have to replace the ink cartridge.

  Let me know how the printer performs on these alignment pages.  If black ink prints fine on this page, this indicates a problem with the selection of the driver or settings.

  Jean

• When I download a file it is not in the box download whrn finished loading

  When I download a new file (e.g. a updating the file downloads (I see the bar and the remaining time, but when it finishes downloading the box is empty.))

  Also, I do not see the previously downloaded files

  Tools > Options > privacy > Firefox will be: "Use the custom settings for history": "Remember download history.

• Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

  Hello

  My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
  In our office, the computers are all equipped with Windows XP.

  When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
  I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

  I hope you understand what I mean.

  The man said that he had no this problem with non - OEM Windows Vista versions.
  He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
  He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

  Does anyone have an idea of the cause of this problem?

  > The man said that he had no this problem with non - OEM Windows Vista versions.
  > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

  That's nonsense for me
  The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
  There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

  Check this box:
  http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

  You will find information that a problem has to do with the new Windows Vista network map.
  Windows Vista uses a new Protocol (Link Layer Topology Discovery).
  LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
  But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

  But you can fix the problem by downloading and installing the layer topology discovery responder.
  Install it and your PC Windows XP will appear on the network map.

• Apply for a job that an i marked the days I can work a TI says that I have not checked the boxes

  I am to apply for a job a TI says check the box to indacate what days I am free to work, so I check, a TI goes back to the page saying I did not mark the box, I'am so ask what she could be, how can I fix it, if it can be fixed!

  Thank you

  Bettyjo Applehans

  Hi Bettyjo Applehans,

  1. what happens on the only site?

  If so, you will need to contact site support.

  Step 1:

  You can temporarily disable a security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Step 2:

  If you use Internet Explorer, then you can try to disable temporarily add ons and check if it helps:

  Steps to open Internet with no mode of modules:

  a. click on start

  (b) in the search box, type in Internet explore

  c. Select Internet (no add-on mode)

  For further ifnroation, please see the following article

  How the modules of the browser affect my computer?

  Hope this information is useful.

• Microsoft Visual C ++ Runtime Error - can not see the path of the file.

  When I get the runtime at startup error, I don't see the destination of the file. It is very annoying that I can not see the program that gives me the problem.

  All it says, this is:

  Runtime error!

  Program: C:\Program F...

  How can I extend the above so I can see the path of the actual file?

  Also going to go for a 2 for 1 here...

  Immediately after the closure of the runtime error box, I get the message that search settings stopped working.  I close who and everything is fine until I reboot (by making the error happen) but I'd rather not have the problem in the first place.  I run Windows 7 Ultimate.

  Error information:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: SearchSettings.exe
  Application version: 4.5.0.2
  Application timestamp: 4e04ab86
  Fault Module name: MSVCR90.dll
  Fault Module Version: 9.0.30729.4940
  Timestamp of Module error: 4ca2ef57
  Exception code: 40000015
  Exception offset: 0005beae
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Information additional 1:9956
  More information 2: 995611374799875ff43c42d4b1b84d70
  3 more information: 3d4b
  Additional information 4: 3d4b4db0455ea2295d172b959897673c

  Maybe just download a new MSVCR90.dll but I would like to hear what you have to say.

  Hello

  ·         Did you the latest changes on the computer?

  We must first identify to identify the program that is causing startup problems.

  Step 1:

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode.

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  Step 2:

   

   

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• If I Zoom in an image appears a large black squares and I do not see the image, I use a CC 2015 Photoshop in a Mac, can anyone help me please?

  If I Zoom in an image appears a large black squares and I do not see the image, I use a CC 2015 Photoshop in a Mac, can anyone help me please?

  There are three things to try. If this image has been opened through Adobe Camera Raw 9.0, unchecking the GPU in ACR preferences. 9.1 is up-to-date and should have corrected it.

  

  Second: Photoshop Preferences > Performance > GPU settings advanced, tamp him drawing to this Basic Mode.

  

  If it does not, uncheck the box "Use Graphics Processor" in Photoshop preferences until there is a fix.

  I don't think that OSX allowed for graphics drivers updated by author GPU like Windows does.

• When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image

  When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image. I uninstalled and reinstalled but same result. How can I get this reset to display the selected image and handles of the crop?

  Go to your Lightroom preferences, the performance tab and uncheck the box "use GPU processor."

• When I m showing police area I do not see the type fonts? Why? or why I can do to fix this?

  When I m showing police area I do not see the type fonts? Why? or why I can do to fix this?

  Mijail,

  I think that it can fix:

  Open system preferences and go to accessibility. Then select display in the source on the left side list, then check the box transparency reduced.

  It was introduced in this #15 post by TheUlser:

  https://forums.Adobe.com/message/6854594#6854594

  It has been described on this page from Adobe:

  http://capitalmacservice.com/font-preview-working-Illustrator-CS-5-Yosemite-fix/

  It may also depend on the monitor, as shown in the message #29 by Loncar in the same thread.

  Of course, this also affects other things so there can be a downside to it, of course, the influences of transparency reduced the appearance of other things, but so far nobody complained disadvantages.

• can not see the default host application

  I do not see the "host application" in the context menu under "open with".  It does not appear when you choose files on drive C, or when choosing files in a shared folder. I enabled sharing and checked the box to enable VMware open applications on the Mac.    I tried to uninstall and then install VMware tools several times.

  VMware 2.0.4

  MacPro 2x3ghz dual-core Xeon

  Mac OS 10.5.7

  In Windows XP if you right click on a file that resides in a shared folder of VMware and select the open with menu and don't see 'The Application host by default', it is normal if you have never opened such a file before to this virtual machine and you would need select open with > choose program... > default from the host Application and it will open the file in the default application on the host for that type of file and from that point forward for this file type then "default host Application" should then show directly in the open with menu.

• In the new window of the tab, I get a full screen of a site, and I do not see the gear of NEW CONTROLS TAB

  In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
  I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
  I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
  I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciated

  What do you see on the page, just nothing?

  Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit

  If you open a new tab, which solve this problem?

  Edit: sorry for typo's fault: browser.newtab.url

• Version 38.0.1 does not see the passwords stored in previous versions

  Version 38.0.1 does not see the previously saved passwords, and urged it to re - enter and save the password. After revert you to the version saved 31.7.0 pass back too. We have more than hundreds of copies of the program and all cached passwords, users do not even know what their password. This failure is a serious problem.

  Problem solved. Probably the file has been corrupted signons3.txt. I deleted the file, and the new passwords are kept. After this version of the software update and new version I've seen passwords, create a logins.json file and now everything is fine. On all other computers in the company such a problem does not arise.

• Can not see the Forum Signature

  The whole issue is that I do not see the image I created for one of my signatures. I find this strange but because it's only MY signature in this particular forum (the official Sims 3 ones) that I can't see. I see everyone, and I don't have this problem on another forum or website. However, I can see the signature when I look at the forum using my phone or another browser on my computer. There is this: the signature will appear suddenly after that I have post a photo in a real post, but as soon as I refresh the page or go to another, a large white space will be where my image is supposed to be. I asked others, and they all say that they can see it properly. I tried to reset Firefox, but it changed nothing.

  There have been problems reported in Firefox with images stored on Photobucket.
  
  Would be easier to host images with another image, hosting company.

  This issue seems to be caused by the default value of text/html Firefox sending accept header instead of an image request and this causes Photobucket redirect to a HTML page with the image and not the image that is requested.

  • [981195/questions/981195]