Do not work indicator in the taskbar notification

Similar Questions

• My touchpad lock does not work, even if the orange light is on, indicating locked buffer. Probook4420s.

  My touchpad lock does not work, even if the orange light is on, indicating locked buffer. Probook4420s.  Windows 7 32 bit.

  Hello

  If the amber light is on the TouchPad itself, try double tapping

  If that is not activate, try uninstalling the device driver course Synaptics pointing, then restart the computer and download and install the driver from the link below.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4145435&prodNameId=4145436&swEnvOID=4052&swLang=13&mode=2&taskId=135&swItem=ob-86824-1

  Kind regards

  DP - K

• I got a notification of update for adobe CC but it does not work and now the Office does not

  I got a notification of update for adobe CC but it does not work and now the Office does not

  I actually just finished with support on a cat and it was corrected. Thank you.

• The Microsoft Security Alert shield is red in the section of the taskbar notifications. Help, please!

  The Microsoft Security Alert shield is red in the section of the taskbar notifications. I opened it and it says virus protection is turned off and "Microsoft Security Essentials reports that it is turned off. Checked with Microsoft Security Essentials and it says computer is protected. What should I do? Thanks for help!

  The Microsoft Security Alert shield is red in the section of the taskbar notifications. I opened it and it says virus protection is turned off and "Microsoft Security Essentials reports that it is turned off. Checked with Microsoft Security Essentials and it says computer is protected. What should I do? Thanks for help!

  I'm guessing that you're referring to a problem involving the Security Center that happens sometimes after update silent through updates of Windows to the new version of MSE... but it is also sometimes occurring after the updates of Windows 'monthly '.  Usually, but not always the problem occurs on computers running XP.

  If the MSE icon is green then you should be protected and cannot ignore this Security Center warning. The problem resolves after a few days.   I do not pretend you disable the protection in real time on MSE, disable Security Center, restart the computer and then turn everything back on and restart once more... some users report this sequence fixed the problem.

  BUT

  You may want to consider the following threads:

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/Ive-Windows-essential-and-is-showing-me-my-PC/c76fc125-c21f-46a9-8B9F-c9b1311171b1

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_updating/Security-Center-message/558e1220-9f21-4e6c-Be92-ddcc65d36c0c

• I have a quick notification window pop up frequently, and it is just an unreadable flash on the taskbar notification area.

  I am running Windows Ultimate 32 bit. I have a quick notification window pop up frequently, and it is just an unreadable flash on the taskbar notification area.

  This is lightening fast and as I said, it cannot be read because it's so fast. I ran Windows Defender, SUPERAntiSpyware, Malwarebytes Anti-malware full scan with Norton Internet Security and Microsoft Security Scan and nothing came. Cannot know what is happening. Any ideas?

  Hello Chris,

  Thanks for posting your query in Microsoft Community.

  I understand that you have any questions, an error on the taskbar.

  I would like to know some information about this problem to help you better.

  (1) you remember changes recently in the computer?

  (2) have you noticed if the pop-up appears only when access to a particular application?

  In the meantime, you can try to follow the following suggestions to solve the problem.

  Step 1: See the link to start in safe mode to start Windows with a minimal set of drivers and services to check if the popup appears in safe mode.

  Startup options (including safe mode).

  Step 2: If you are able to use the computer without pop ups in safe mode, I suggest you perform the clean boot because your system in a clean boot state can identify if all parties third party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot. See the link to perform the clean boot.

  How do I perform a boot in Windows

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair .

  In addition, open the link and follow the instructions to get the event logs, so that we can see which application is defective.

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• Since the upgrade to ios 9.3 on my iphone 6, links in the email and SMS are not working and freeze the apps.

  Since the upgrade to ios 9.3 on my iphone 6, links in the email and SMS are not working and freeze the apps. If anyone has had this problem and if yes, how do solve you this problem?

  There has been a number of similar reports. See also http://osxdaily.com/2016/03/25/troubleshooting-ios-9-3-update-problems/

• In the United States, I can use selector locale quick to get U.S. locale of Russia but in Russia, it does not work to go the other way or any other premises than elsewhere. After selecting a new language and restarting firefox, it remains on the Russian

  In the United States, I can use selector locale quick to get us to the locale of Russia (ru - RU), but in Russia, it does not work to go the other way or any other premises than elsewhere. After you have selected the local new and restart firefox, it remains on the Russian locale. Y at - it a fix for this problem?

  This has happened

  Each time Firefox opened

  == Looks like it started with a newer version of firefox, but this may have been coicidental

  You have other language packs languages installed?
  Tools > Modules > languages

  There is no module language en-US, to achieve that you must install the version of Firefox en-US and install other languages in the version.
  http://releases.Mozilla.org/pub/mozilla.org/Firefox/releases/3.6.6/Win32/XPI/

  See also http://kb.mozillazine.org/Language_packs

• Satellite 5100: Driver CD does not work to recover the operating system

  My laptop Satellite 5100 did not work today. The whole system broke down, and I can not open any program. I want to recover my system but my CD driver does not work, I can not use the recovery CD to run the system.

  What should I do? Can I replace a new CD by myself? Is there another way to recover the system without the CD driver?

  Thank you very much and I look forward to hear from you.

  Hello Bingping :D (Lazy nickname)

  Well, first of all you are sure that the drive is dead or it of just not possible to boot from the recovery CD?
  Press the C key immediately after booting laptop (by pressing the power button) to boot from the CD drive.

  If it doesn t work so try to boot from the original Windows CD. Perhaps the Toshiba Recovery CD is damage. But if it is not possible to boot from a CD so I would say that the reader has a malfunction.

  Of course you can replace the car yourself. It of not very difficult, but you must be careful. Not every drive is compatible. The caught player support, you can order the Toshiba ASP in your country.

• Tecra M7: Tablet does not work after closing the lid

  Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

  Does not happen on hibernate or sleep.
  I have the set cover to do nothing on close.

  Hello

  What do you with Tablet does not work after closing the lid?
  Is - what the laptop freezes or what? What happens exactly?

  Closing the parameters adjustable lid to Hibernate or standby mode or no action.
  These settings can be defined in configuration power saver actions.

  If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

  Best regards

• I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  If you have any documents open in Keynote 5 then you will not be able to drag it to your Dock. IF a right-(control) - click the Keynote icon 5 shows Quit in the drop - down and then select Exit. Now you should be able to slide your dock.

  It is often necessary to drag it from the dock, drag the icon quite some distance from the dock (to what the REMOVAL appears on the icon).

  You can also right-(control) - click the icon select Options, and then, in select Options remove the dock.

• My toshiba notebook webcam does not work; It shows the hearts.

  My toshiba notebook webcam does not work; It shows the hearts on the video screen

  Hi KurtKawohl,

  1. what operating system is installed on the computer?
  2. have you made changes on the computer recently?
  3. What is the Toshiba laptop model number?
  4. do you get an error message?
  
  Method 1
  If you use Windows 7 , and then run the hardware and peripheral troubleshooting tool.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  
  Method 2
  I suggest you to download and install the drivers from the Web from Toshiba website for your webcam by selecting the model number of your laptop from the following link:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Sound does not work. Under the properties of sounds and Audio, peripheral devices by default "sound" is grayed out.

  Original title: audio device problem
  just reinstalled windows xp.  Sound does not work.  Under the properties of sounds and Audio, peripheral devices by default "sound" is grayed out.  Microsoft Fix it, but the best I get is "do not set as default audio device.  The lack of sound recording does show a device.  Ideas?  BTW, I sometimes get static noises out of the speakers.

  Hello

  I suggest you to follow the steps from the link and check if it helps.

  No sound in Windows

  I hope this helps.

• Windows Update service will not work after upgrading the hard drive

  I'm running Windows Vista 64 bit, Home Premium SP2 with 8 GB of ram. I recently cloned my hard drive OEM of 500 GB, 5400 RPM Toshiba MK5055GSX via a standalone, dual drive bay dock for upgrade to a 750 GB, 7200 RPM, Western Digital WD7500BPKT. Since the clone/upgrade, Service Windows Update does not work and gives the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "And Yes, I checked and everything related to Windows Update seems to be 'turned on' or well defined, but the service will not work. Notes; Windows Update still works with the player "OEM", it is only the new WD drive that has the problem. Thanks in advance for any help or suggestion on getting this problem is resolved.

  This fixes my laptop http://www.realworldrobotics.com/troubleshooting-help/windows-7-64bit/windows-update-service-not-running-after-upgrading-drive

• Update of Vista 32 bit does not work after replacing the hard drive

  A month ago the hard drive of my computer (ACER Aspire 6920) had to be replaced. The disk image hard precedent (which includes the c: with Windows Vista Home Premium 32 bit, SP 2 build 6002) has been mirrored to the new hard drive. Everything seemed to work fine until I noticed that I don't have more updates from Microsoft. I tried a manual update and got the message that the update service was not working and I have to restart the computer. However, the Task Manager showed that the update service has been executed. Of course, I rebooted the computer, but nothing has changed.

  I found a whole bunch of recommendations for this issue in this forum, but nothing seems to work:

  • The Microsoft FixIT tool indicates a problem with the update of components, and then said that the problem had been solved successfully. However, the problem is still there and rerun the FixIt tool Gets the same message on a problem (yet) found and fixed.
  • I also stopped the update service, delete all content in Windows/C:\Windows\SoftwareDistribution and restarted the service. without success.
  • I've temporarily disabled my security suite (Eset Smart Security 6) and tried the update. I also have fittings the folder C:\Windows\SoftwareDistribution to the scope of the antivirus, without success. On the old hard drive, I used a different security suite so I thought that maybe the ESET (that I installed everything recently) could be the cause of the problem, but that doesn't seem to be the case.
  • I also followed the instructions provided by Microsoft at http://support.microsoft.com/kb/971058, but again, no change at all. However, it should be noted that registering some DLLs that Microsoft listed does not work (message that the DLL is not found or some server entry point (my translation, I'm using the German UI and don't know English good term; sorry) could not be found.)

  Http://support.microsoft.com/kb/947821 , I found another tool that supposedly can solve some problems of updating; I downloaded the version for Vista 32-bit, but it cannot install it on my computer (error code = 0xc8000247 during installation).

  So I'm really lost now what else to do. I would appreciate any suggestions. Please note that I am not technically very warned :)

  ARG, apologies.

  Was not aware that they had dropped support for Vista... (I myself have 'graduated' Vista earlier)

  The fact that you have not already installed TSRI is exactly your problem.

  Recent hard drives using 'Sectors 4 K', also known as 'Advanced Format Technology'.

  If the installed hard disk driver currently is not compatible with this specification,

  It will result in oddities like the status of the service Windows Update is not recognized correctly.

  Installation TSRI will fix this in most cases.

  Alternatively, if you are using Vista SP1 or later version (or 7 SP1), you can use the real driver.

  Since you are already updated to SP2, we will see if it is a viable solution.

  Go to: start-> Control Panel-> programs-> programs and features

  In the list of installed programs, locate and remove if found.

  -Intel Matrix Storage Manager

  -Intel Turbo Memory

  This should force your computer to go back to the real driver provided by Vista.