"Press upgrade" iOS 10 broken

Similar Questions

• The ROMMON upgrade is necessary when upgrading ios in ASR1K

  Hi everyone can answer this question for me? Thanks in advance

  The ROMMON upgrade is necessary when upgrading ios in ASR1K

  The ROMMON upgrade is necessary when upgrading ios in ASR1K

  I'd do it.

  My logic is very simple: the IOS update requires a reboot, Yes?  The ROMmon update requires a restart.  So why not upgrade the IOS and ROMmon in a remake?

  I see really no operational reason DO NOT upgrade the ROMmon.  It must, in all cases I've seen, 20 seconds to upgrade the ROMmon.

• iCloud account in Outlook no longer works after upgrade iOS 10

  After the upgrade to iOS 10, my iCloud account does not connect to "unable to connect" error message when you set up the account in Outlook. This through all my iOS devices and only started when iOS10. Thoughts as to why this is happening all of a sudden. I have not changed my account credentials.

  Try restarting the device to see if it solves - restart your iPhone, iPad or iPod touch - Apple Support

• No sound on the hands-free car on incoming calls after upgrade iOS 10

  I recently updated my iPhone to iOS 10 6s. With one of the versions iOS 9 it makes my hands-free connection in my Toyota 'agitated', but this time I could call people without problem, so I thought everything was ok. That was, until I got a call and didn't hear a thing after accepting it.

  Seems iOS 10 has broken my audio on incoming calls. I can't hear the caller, and the caller does not hear me. I tried to reset network and matching settings once again, but unfortunately which didn't help either (this resolved the problem of stuttering last time).

  Anyone got tips on how to solve this problem?

  DelGurth salvation!

  I see that your car radio on your iPhone Bluetooth connection no longer works correctly.  I know it's important to have this job just so I'm happy to offer assistance.  Please follow the instructions in this article, and it may be necessary to contact Toyota to see if there is an update of the firmware available for your car stereo.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Thank you for using communities of Apple Support.

  See you soon!

• Replacement of text disappeared after upgrade ios 10.0.1

  I have an ipad 9.7 pro and an iphone 5s

  I've updated the IOS 10 software and the iPad don't would not recognize the charge lead, the apple store has replaced the ipad. After receiving the new ipad, I went to restore from my latest icloud save.

  Since the update iOS 10.0.1 two devices I've lost replacing text on both devices.

  all my shortcuts for work disappeared.

  I tried to disconnect to icloud and re-start of the ipad so far no change.

  I don't have a mac computer.

  Hi rluschtinetz,

  If I understand your message that after upgrade to iOS 10.0.1 on your 5s iPhone and iPad 9.7 Pro, you're missing the replacement of text on both devices. With the help of text replacements are very practical and I will be happy to provide information on this.

  Restore from a backup of iCloud can take a long time depending on the amount of data included in the backup, you can check if the restore process completed by going to settings > iCloud > storage. Also, I want to make sure that you are connected to iCloud on both devices. Then check if you can see your replacements of text on one of your devices. If you have a recent backup of iTunes for one of the devices, you can also do a restore of the unit in question as well.

  Nice day.

• iPhone 6 + no screen no longer wakes up to see the alerts after Upgrade iOS 10

  With everyone I upgraded my 6 + iOS 10 yesterday. Now my phones screen wakes up is no longer to view alerts. The alerts are coming through if I take my phone and click on the button there are present on the lock screen. For alerts work wakes up the screen is no longer? To be clear, I understand that this phone will not supported are raised to turn the feature back on.  My work daily flow there just my phone on my desk. When an alert is delivered in the screen used to come awake for I can quickly look and see if I need to take further measures. Now this is no longer the case (post updated to iOS 10).

  I contacted Apple Support via Chat, but has been disconnected mi cat and could not reconnect. I reset all the settings and re-setup of all parameters. Same behavior, alerts come through its just that no more wake on receipt of these alerts (from any application) of the screen. DND is not lit.

  Any thoughts? My next step will be to become a complete set of backup and wipe and restore. Don't know how else to proceed.

  Hello...

  I have the same problem too, but I'm not able to view it's to show that I am not allowed to post.

  But would like to stress this issue because it is a major problem.

  I updated my iphone 5 (unlocked) but since after MY iphone 5 s is not to wake up when there is a call... the phone rings but the screen remains black. You can't even see who called and cannot take the call at all.  Please urgently update and attach it to the emergency.

  Thank you

  concerning

  applefanboy

• Mail application does not load after upgrade ios 9.3.2

  After the upgrade to 9.3.2 my mail app won't load. It will open briefly, and then close by itself. How can I solve this?

  Hello

  There are 2 cases for your problem; It is a software bug or that you have received an email that cannot be 'understood' by iOS, bringing to the app logon failure (this had already happened with messages about iOS 8). I suggest you reboot your device and see if your problem is resolved. If this isn't the case, then I fear of having to wait for an update and connect you to your email on safari...

  I really hope that your problem is solved!

  iPad 2 Air, iOS 9.3.2

• No. 3 service after upgrade iOS 9.3

  I just end installed iOS 9.3 upgrade on my iPad 2. I have now lost my 3G access with a service not showing status. Any ideas?

  Just removed my SIM card and put in. Fixed a problem!

• upgrade iOS 9.2 problems - devices randomly freeze completely-no touchscreen or buttons respond.

  I upgraded my iPhone 6 + and my iPad to iOS 9.2 2 Air.  Since then, the two devices to randomly freeze completely-no touchscreen or buttons respond.  Sometimes when this happens, the screen will turn black and the Apple Logo appears just as if it has been restarted.  My wife has the same products and performed her 2 days before upgrade I did and she had no problem at all.  Anyone else experienced this?

  Post edited by: Cap ' n Grog

  I have exact same features and same upgrades in the last days. My devices do not produce keyboards when trying to answer or data entry. Also, I got a brand new 6 iPhone + a month ago to replace the iPhone 6 + I bought a year ago because the screen is dead to my contact, answer spaces would get a gray band, you cannot type on, iSight replacement was necessary. Not only that, iPhone of my husband 6 + (purchased at the same time as mine) is now known the SAME PROBLEMS, screen death, etc.. It seems to me that the IPHONE of APPLE 6 + IS a PIECE OF SHIT.

• Comment when upgrading IOS IPS & IME VERSION?

  the last ios for ips is 7.0 (2)

  and the last ime is 7.0.2

  If I have already installed the ime with 7.0.1 but the image of the ips now is 2.0000, should move the ime to 7.0.2?

  If necessary... How to do... I checked the soft EMI, but I can't find the upgrade options, they is any soft for upgrade .pkg

  THX...

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Another question.

  How to check the version of idm is built within the iamge ios ips?

  The IME 7.0.2 Basic function has not changed since IME 7.0.1 you need not update if you do not want.

  IME 7.0.2 supports more sensors now (increase of support from 5 to 10 sensors).

  To upgrade 7.0.2 IME you can just run the Setup file on top of the existing version. I just make sure you close the IME before the upgrade.

  Here is the read me on IME 7.0.2:

  http://www.Cisco.com/Web/software/282829584/28797/IME-7.0-2.Readme.txt

  Hope that answers your questions.

• How to upgrade IOS for Aironet 1252 G

  I'm trying to update the IOS for Aironet 1252 G wirless access point, I look at all the instruction and they do not make sense! And there is just no instuctions on how to upgrade the IOS in the WEB BROWSER interface. I just did an install of Windows Server 2008R2 and real simple compared to only raise AP and running, but there still Microsoft and their staff try to keep things simple for people where CISCO makes more complex theings.

  Hello

  If you try to update the IOS on a Cisco AP upgrade recomeneded uses the cli via a telnet session or console.

  **************************************************************************** RECOMMENDED UPGRADE TROUGH CLI: The following are the proper steps to do an IOS upgrade in a CLI/Telnet session (This is the recommended upgrade): 1st: Use a TFTP server in the computer that you are going to use for the upgrades. If you don't have one, get the free TFTP server in the following link: http://tftpd32.jounin.net Note: Make sure that the computer and the APs are in the same subnet. For example and AP in default settings will have IP: 10.0.0.1, so you need to have the computer as IP 10.0.0.2, subnet mask: 255.255.255.0. 2nd: Download the IOS image from the Cisco.com Web site. Note: Do not "unzip" the image. 3rd: Open the TFTP server (make sure that the TAR file's name of the IOS image is shown as in the web site, because sometimes it gets renamed to "Download .tar" and if that happens you need to rename it).  Browse the TAR file and select it, then click ok. 4th: Telnet the unit, go to enable mode and enter the following command: ap#archive download-sw /overwrite /force-reload tftp://IPAddress of_the_tftp_server/name_of_the_IOS_image_you_downloaded In this link, you must specify the extension, as an example: ap#archive download-sw /overwrite /force-reload tftp://10.0.0.2/c1200-k9w7-tar.122-13.JA.tar Note: The IOS image name is case sensitive, and it should be complete.
  
  ******************************************************************************
  
  This is the same procedure for any AP in IOS mode, the difference would be the image used for each specifc model. 

• ASR1004 - error of IPSec after ROMMON & Upgrade IOS - XE

  Hi all

  After updating the router ASR1004 S ROMMON 15.2 (1r) and IOS - XE 03.06.02.S, I get the following error messages:

  % IOSXE-3-PLATFORM: F0: cpp_cp: QFP:0.0 wire: 101% TS:00000059590688361391 IPSEC-3-HMAC_ERROR: IPSec Security Association receives an error HMAC, DP manage 5449

  Does anyone know, what is the problem with this error?

  Thanks in advance,

  Norbert

  Norbert,

  This means package was recived that has no verification of HMAC.

  If you upgrade to a version that contains this hotfix:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtw69096

  you will get more information on packages like this.

  Marcin

• Impossible to stop iPhone 6s after upgrade iOS 10

  The update to iOS 10 Sonce I couldn't turn off my iPhone. Everything else works fine. Any suggestions?

  Hello

  The following steps may help:

  • That your iPhone does not respond as expected, I suggest that you first save it:
    • The backup of your iPhone, iPad and iPod touch - Apple Support
  • Then, make sure that you follow the proper procedure to turn off your iPhone:
    • Restart your iPhone, iPad or iPod touch - Apple Support
  • If your iPhone does not meet the normal restart procedure, then force try restarting holding down the sleep/wake button and the Home button for at least 10 seconds, until you see the Apple logo:
    • Restart your iPhone, iPad or iPod touch - Apple Support

• Loser Bluetooth after upgrade IOS 10

  Since the update of my 6 more for IOS 10, I keep losing connectivity bluetooth on all my bluetooth devices. Have T-Mobile as carrier. Does anyone else have this problem?

  Tap Settings > Bluetooth, then turn Bluetooth off then turn on again.

  If this does not help, tap Settings > general > reset > reset network settings.

• How do you access contacts on the Apple Watch after upgrade iOS 10?

  Previously, a press the button below to access contacts. Now, what?

  Hello

  Under watch OS 3, the friends feature (which was available in previous versions) comes over and there is no direct replacement for it.

  When making calls or sending of new messages, contacts instead can be selected via the phone and Messages applications or using Siri:

  • Messages: https://help.apple.com/watch/#/apd92a90f882
  • Calls: https://help.apple.com/watch/#/apdc38d7a95e