Document revision without conditional tag

Similar Questions

• How the conditional tags can be viewed without installed RH?

  Hello

  I use RH9 to create chm HTML Help files. I have two tags conditional configuration. Everything works fine to build the chm. I would like to somehow show the content of each conditional tag.  This isn't a problem for someone who has RH9 you can go to the reports to see the topics that are associated with each tag and then display the topic that presents the text associated with a tag.

  However, if a manager needs to review that which accompanies each tag but isn't RH9, how I would give them something that shows them the content that goes with each tag?  Which gives them 2 different chm files to compare it won't because there is just too happy to determine the differences.

  Thank you

  John

  Good, a few thoughts...

  For the tags applied to all subjects, you could create a set of frameworks that would allow the two subjects to be displayed simultaneously. Each side-by-side or up and down. Which could allow an easy comparison.

  And I thought that for content, you could code the text color. But it would probably be a little a lot of work. My thought was that you could create and apply styles that cause the color coding to occur. Only set them in a sheet of unique style that would apply only to generate the file CHM 'review '. Then, you must use the original style sheet required during the generation of the final output.

  See you soon... Rick

• Problem with the conditional tags in printed output

  I write help files for different versions of our software - version 4 and 5 using Robohelp for HTML 5.0.2
  
  There is a large overlap of information between the two, so I use a help file joint with marked topics that are specific to version 4 or version 5.
  
  I went out and then use with 'NOT v4' or "NOT v5" as the conditional tags.
  
  It works fine in the HTML output. However, I encountered problems with the printed output.
  
  Ideally, I want the help file using the option "generate the single document" because it means that the document produced, without the single output field. However, when I do, the tags conditional build fail and I get a piecemeal result.
  
  If I generate the document by using the option 'generate individual documents' tags conditional build work, but I get the only field I want to avoid.
  
  Does anyone know how to get the conditional tags to work when the option "generate the single document" is selected?

  Pierre and HKabaker - thanks for your comments.

  I think I have the answer now.

  In the properties for the SSL Print dialog, the third screen is the dialogue of section layout. I had removed some sections in the right pane (for example, the default title page, glossary, and index) because I did not want them to appear in the final printed output. It seems that without these sections present conditional compilation tags do not work correctly when the document is released by using the option 'generate a single document ".

  I started again with a "blank" printing of SSL version. Conditional constructions using the "generate a single document" appear to work fine when I leave the dialog layout intact section.

  I can even do the conditional tags build an injustice because the option "generate a single document" (after that I made the changes in the dialog layout section) seems to be that some of the chapters in the table of contents and omitting others.

• condition tag applied to insert to insert text not hiding all the Insert

  Hi all

  I am running FM12.0.2.389 on Win7-SP1 (64-bit) laptop with i7 & 16 GB of RAM.

  As Arnis had mentioned on a post on the use of tags condition with tables, applying the condition for the character of point tag insertion conceals the entire table when you hide that tag. It's the way I always saw tags condition applied to the insert text, too much work. However, this is not what I see now, but I don't know if what I'm seeing is "as expected" typical behavior, or a new change since FM9 (jumped FM9 FM12), or if there is a problem with my installation of FM. "."

  Here's the scenario: I have FM files that serve as overlays of text in multiple documents ("insert FMs" for clarity). The entire library of files FM has deployed several condition tags and variable to accommodate more boundaries between nearly identical products, U.S. / International English and more short documents output the same set of source files. For the sake of discussion, I'll use an example which includes 4 labels of condition:

  • 3D (specific products)
  • LI (specific products)
  • Kit (specific output)
  • Installation (specific output)

  Insert FM has 3D and LI tags as appropriate. Container FM has 4 of all labels in the game. The tag is the FM Kit insert insert text for the Insert marker. When I'm running Kit, I can show 3D or LI and achieve the expected results. However, when I hide Kit, text inside of the FM which is tagged with insert regardless of the specific tag always present, even if the rest of the FM in medallion is hidden. I am pleased to provide you with a ZIP of the files needed to use as a sample.

  I don't remember ever having this problem in FM7 or FM8 FM9. (I was a user of FM since the FM5.5 and the use of tags condition since FM6.) Is this normal? Is this a change designed as? Or am I facing a sort of weird corruption of my particular FM installation?

  Thank you

  René

  Hi René,.

  A text overlay behaves in a similar way to a table. It is anchored at the insertion point, and you apply the condition to the anchor to condition it. When you apply the condition to the Insert, all content conditionally marked in the box becomes a combined condition, i.e. the Insert with 3D and conditions of LI now has Kit, Kit & 3D and conditions of Kit & LI.

  Therefore, you have to build the Boolean expression to show or hide so combined cases. In order to hide the KIT and 3D interior and conditions LI of the Insert, the Boolean expression would be:

  not ("Kit" or (("Kit" et "3D") or ('Kit' and 'LI')))

  Simply hide only Kit will not hide a combined condition (e.g. Kit & 3D).

• Topics marked with the conditional tags still appear in the documentation

  Hi all

  I have a big problem with RoboHelp 7.

  I defined a new conditional tag (I have 2 together) and I mark the topics in the table of contents with relate to this tag conditional, right?

  When I generate the chm file, everything is OK. The headings marked with the conditional tag do not appear in the table of contents that I specified to exculde subjects marked with this conditional tag.

  When I generate documentation however, everything is still in the document even if I was clear that I don't want these subjects to appear.

  Can you please tell me what I'm doing wrong, or how can I properly so that I get my results?

  I am using Windows XP Pro and RoboHelp is updated with all service packs.

  Thank you

  Bogdan sailor

  Right-click a topic in the table of contents and select apply the tag build conditional. Check out the new / Multiple option.

  This screen displays.

  

  You can clearly see if the tag is applied to the table of contents or the subject. If it is applied on the subject, so it will be not when generating table of contents entry will be automatically deleted. If it is applied to the table of contents only, he is always in the build.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• FM 9: Cannot apply conditional tags

  I was able to create conditional text tags, apply it and see good conditional indicators in several documents using 9 FM. Recently, in a new book, I am unable to apply conditional tags. I think I got the new user interface, since conditional marking has worked before. I can create tags and configure them fine, but when I apply the text, table, graphic, etc, that nothing is happening. the text remains unconditional.

  You don't describe your steps. So, make sure that on the pod of conditional text, you select the condition, and then select the option button, then click on apply. If you forget to program before you click on apply, the condition is not applied.

• Build Conditional Tags - problems when generating content

  Hello

  Just wanted to print 4 pages of a long aid project so I added the compilation conditional tags called "ad-hoc" and created a print Doc SSL where ad hoc was conditional create value.

  When I generate the document I am making everything always. Am I particularly thick today?

  I tried marking all 'online', and then adding the ad hoc tag to pages construction the condition as 'online' AND 'ad hoc', but then nothing.

  Help appreciated as never.

  Nick.

  @Tompsk on Twitter.

  I don't think that the tag a wide impression is necessary. If you apply credits for all the subjects, then remove some before generating applied online with NO of GENERIC help, you will get only the items which you have removed the tag. No need to apply another.

  If you want to print, then forget about tags, just a print layout where you select only the items you want in.

  Printing works in the opposite way to online. Impression, that you include, online, you will need to exclude.

  See www.grainge.org for creating tips and RoboHelp

  Follow me @petergrainge

• The deleted output tables finished when the conditional tags using build

  Hi and thanks for any help you can offer on this...
  
  I use the WebHelp/print Documentation HR 6 single-sourcing method, and I created two build conditional tags - "OLH" (online help) and "printed". Essentially, the conditional tags are awesome... except when my content includes HTML tables. If a table exists within a set of conditional tag material, material that exists AFTER the table (and outside the conditional tag) is omitted from the finished output (i.e., regardless of the unique method out of the Source used for the production of finished products - WebHelp or printed Documentation). In some cases, only certain documents after the table is omitted.
  
  For example, in a comprehensive document which includes a specific paragraph and a data table I want to exist only in my printed docs. I apply the tag "Print" in this paragraph and the table. Once I have generate the schema of WebHelp (or even preview and apply the term appropriate on the conditional tag build), labeled "Print" content is left out, but is so everything that followed it. even if I don't apply a tag of conditional compilation to the material in question.
  
  I have a workaround, but it sucks... If I delete the tables (and re - format the text content), everything is fine, and the build tags work properly. The thing is, I want to use the tables in my content.
  
  I wish a WYSIWYG solution, but if I have to change the code, I'll live... I just need to know what and where to change (I played with the ' < p > < style = "" x-condition: printed; ' > ' tag and additional locking "< /p >" and "< / style >" tags, but that has not worked ").
  
  Thank you for taking the time to review that and for any help you can give.
  
  

  Hi Vernholio,

  This looks like a problem that is covered in the forums before. Basically, it happens when the Board as a whole has been select. If you click and drag to select all of the cells in the table, then apply the conditional tag, there should not be problems with the rest of the content.

  See excerpt on Peter Grainge's site #69

• How to compare the content of two Wordpad / documents notebook without reading them line by line?

  How to compare the content of two Wordpad / documents notebook without reading them line by line?

  Hello

  Without this feature is included in the operating system.

  However, you can use your favorite search engine to look for software that needs to perform these tasks.

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps.

• Conditional tag indicators are visible in the generated output.

  W7, FM 13.0.1.385

  Hi, as above really: when I print to pdf, indicators of conditional tag print the pdf file.

  Any ideas?

  You must disable them before printing. IIRC, uncheck the option 'Show Condition indicators' in the conditional window. I think you can do it at the level of the pound on all files at the same time.

• Remove a conditional tag my content

  Using robohelp 10 on win 7

  I have 5 conditional tags in my HR project. In some cases, the text can be tagged with multiple conditional tags.

  I want to delete a batch tag content so that all content no longer uses this tag.

  Simply remove the tag from the pod of conditional compilation?

  If this is not the case, how can I do?

  Simply press the DELETE key and HR will tell you that it will remove the content tag. From my experience, it does. Test it in a fictional project in case of doubt.

  Also something like this, if not sure, back first.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Conditional tags - how to exclude files from the output

  Hi all

  I am trying to exclude certain topics (books) of the generation by applying the conditional tags. It works very well and these books are excluded from the table of contents; However, section files are not excluded that the output size is exactly the same. The items I must exclude are huge video tutorials. It seems that HR changes only the TOC when applying conditional build tags.

  Any ideas how to ensure that the files of excluded topics are not in the output?

  Thank you

  Hello

  If the subjects are actually excluded or not depends on exactly where you added the conditional tags. If you haven't been tag elements of the table of contents, all that is remove entries from the table of contents.

  My suggestion is to wipe the table of Contents formatting per tag and add the tags to the subjects themselves. Then, they should be excluded. And when they are excluded, they will disappear also the table of contents.

  See you soon... Rick

• CS6 ePub "document Split: from paragraph tags Style Export.

  I tried to find how to set the Option Export ePub "document Split: from paragraph tags Style Export" using javascript. It doesn't seem to be part of the epubExportPreferences, as

  myDocument.epubExportPreferences.breakDocument = true;

  Sets the stop on [standard paragraph] document. I can change it for another single paragraph quite easily, but not what I need.

  I'm probably looking in the wrong place, but if someone could point me in the right direction, I would be very grateful.

  My code is here (that works, but does not define this option): https://github.com/makeBetterEBooks/eprdctn/BLOB/master/DBW_ePubExport.jsx

  Thank you!

  I found the answer earlier, but thought I'd post here for those seeking on the other.

  You must set the name of style paragraph to an empty string:

  myDocument.epubExportPreferences.breakDocument = true;

  myDocument.epubExportPreferences.paragraphStyleName = "";

  Then it will break on the plates for export.

• With the help of several conditional tags with multiple outputs of WebHelp

  I have a project that I created for a web application. Within the web application, there are 3 types of customers (business Accts, Accts National and level 1 clients).

  I added each help topic associated with the help topics that I created.

  Then, I created 3 outputs of webhelp and 3 Table of contents for each type of client.

  My goal is to publish the project, where each type of client has their own output generated. Do it this way, which is listed in the help topics of table of contents for each type of customer that is not correctly displayed.

  Example: National accounts TOC

  What is generated:

  I have tagged in the table of contents to the conditional tag appropriate help topics. Help, please. Any advice? I can also be reached at [email protected]

  None of your screenshots came through - the icon of camera in the web interface allows you to attach images

• Conditional tags in RH9

  Can we add conditional tags to Image Maps? I right click on the image plane but I get no option related to the conditional tags. Thank you!

  Hello again

  Last night I tested and it does not seem you can apply tags to each of the regions. But not really using the RoboHelp interface. What I did to apply a tag to a word just above the image. Then I switched to HTML code mode. I then copied the tag code that RoboHelp inserts just before the marked information and I pasted just before the definition of the map region area. Once you have done that, the tag code end vouscopiezetcollezle than just after the definition of region map.

  I then tested by generating the project and see if the field has been deleted. It has been!

  One thing that I do not have much testing was to see how the designer of RoboHelp view will hold up to. Sometimes it rather snarkily removes any changes that we make in HTML view.

  But it could give a try!

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks