DON'T LEER IN ALTA VOZ NO WORKS

Similar Questions

• the touchpad on my toshiba laptop with windows vista is disable and I don't know who to make it work again

  the touchpad on my toshiba laptop with windows vista is disable, and I don't know who to make it work again.

  Hello

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
  and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
  So usually loaded at the top of the screen.

  There is also usually a TouchPad control utility that loads in the Notification area next to the clock
  at the bottom right.

  Toshiba support - click Communcate for links to the Forums and Contact Toshiba.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba forums - good source of info from others who have the same system or similar
  http://laptopforums.Toshiba.com/

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Also check the control - Mouse - touchpad settings panel.

  You can also try this:

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
  The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
  (drivers), now right CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
  RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
  of work.

  Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
  device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the website of the manufacturer of system (Toshiba downloads - access your model - listed above)
  and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• AutoComplete does not work on Mozilla, I see the shadow of the box. I've done all the troubleshooting recommendations and nothing works. Upgraded to latest version, Mozilla checked the parameters of confidentiality/history, cache cleared, Java Update.

  AutoComplete worked this weekend, and now it doesn't. I made no changes to my computer right now. For example, I can't fill the bar below to say "it happened...". "cannot see the drop down menus... just a little flicker. problem is on mozilla and every program I opened w / Mozilla.
  Before contacting you I searched the forum, done all the things suggested above and nothing has fixed or even partially improved.

  I also have IE on my computer and it works fine.
  

  my contact: [email protected]

  Do a clean reinstall.
  If there are problems with the implementation at day then best is to download the full version and uninstall the currently installed version and remove the Firefox program folder to remove all remaining files.

  • Download a new copy of Firefox and save the file to the desktop.
  • Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
  • Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

  It is perhaps not necessary to create a new profile, so first try if it works with your current profile, and if not then create a new profile.

  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• I don't have its all online. Work all the interiors of audio playback (iTunes, computer sounds, etc...) No audio playback from the internet.

  During an explores, no site to play audio (Pandora, YouTube, etc...). Any internal programs work very well (iTunes, even tests from Realtek). When my daughter logs in as a user it also works very well. I have made sure nothing is mute and volume th is in place all the means. There is nothing I can find in all parameters with the volume to explore.

  Thanks for any help.

  Joe

  Hey Joe,

  Thanks for posting in the Microsoft Community.

  Since you are facing a problem with the audio system, it would be useful that you could answer these questions to help you further.

  1. what web browser do you use?

  2 have you ever done any recent software or changes to the hardware to the system?

  Method 1:

  If you face the issue with Internet Explorer, then try these steps and check if it helps:

  Check if the sounds in Web pages under multimedia option in Internet Explorer is turned on.

  a. open Internet Explorer. Click on Tools and click on the Advancedtab.

  b. scroll until you get the multimediaoption.

  c. under multimedia, check if the sounds in pages Web is selected.

  Method 2:

  You can also refer to the article and see if it helps:

  No sound in Windows

  If you need assistance, please answer and we will be happy to help you.

• I don't see the 'design' button while working with fluid layout, why?

  While working with the fluid RWD layout in dreamweaver:
  

  (1) I don't see the 'design' button, I can only see buttons ' Code, Split and living ", in Dremweaver CC, how can I get the preview of this design button?

  (2) and "Visual AIDS" is disabled, I mean I can't see the 'container' visually when you work in direct mode. So am not in a position to determine when and where to place the div

  Re: Is it possible to display the design view in the fluid grid pages?

• Once Firefox, all my PDF files now have the Firefox icon. I don't like this. Mozilla is working on a fix for this?

  As stated, I used the reset function in Firefox and everything immediately after the icon on all my PDF files changed the Firefox icon. I hope that Mozilla is working on a fix for this?

  It works when you enter in the Acrobat > edit > Preferences > General & the application by default option choose down? to reselect it adobe application and confirm this selection...

• Satellite L30 Vista screen don't be turned on; extrnal monitor works only in Mode safe

  Hello

  I have LS30-10s.
  first the laptop screen not lit up even if I saw a pale ghost of the icons etc.;

  I tried the fact to unplug and now the switch down (battery is dead long) successfully intermittent and random;

  I borrowed an external LCD (Lenovo $) and went well, and by pressing Fn + F5 would actually sometimes make the laptop screen live too.

  I changed the screen inverter and that seemed to restore the laptop screen, but the next time I restarted + or + screen would work unless I chose safe mode.

  Currently I can only use the screen external and only in safe mode.

  Everyone knows this?

  Hello

  Just a few questions:
  The external monitor works properly before disassembling the laptop and replaced the LCD inverter Board?
  What exactly happens if you start the computer in normal mode?

  Have you tried to start Notepad using a Live CD (PE Win or Linux live CD)?
  I would also recommend to check if new OS install is possible.

  Safe mode is just a test environment and the system does not access all recourses of material by using safe mode.
  So, theoretically the issue could be related to a faulty hardware or system problems.

• HP Pavilion PC 500-281: If a reovery disc done on a pavilion of 500-281 work on the same unit?

  Our Church bought 4 identical Pavilion 500-281 desktop PC from HP 15/08/2014.  Yesterday (30/08/2015) a hard hard drives in a defective systems. I called HP support and they want $399 to replace. I think to install a different hard disk, it nuking, and then by installing a recovery on the new hard drive.

  PROBLEM: I did the system restore which has no value.  If I do a recovery of the value of one of the other identical systems it'll work on one that has failed or is - sensitve serial number, in which case I have to order the set of HP?

  Thank you

  Bob Davis

  Thank you, Tom.  I'll give it a try.

  Lucette

• How the tags are stored and then backed up?  Don't want to do all this work if a system failure and the need to start over with saved photos will be all the work of marking saved.  Or IIR/when Lightroom is so more suitable or an option as the next photo p

  Backblaze in particular, but it would be for any backup or future software I guess.

  Tags are stored in the file in your catalog. If you want to have them available after a disk crash, you should make regular, automated backups of your catalog on a different physical disk files. You can enable this in Lightroom via settings-> General-> Backup catalog. Note: you should always take backups of your photos, this feature in Lightroom doesn't have backups of your photos.

  If at some point you consider moving away from Lightroom, you can also write tags to the photos themselves (or in the case of RAW for the XMP sidecar files). This can be done by selecting all the photos and metadata-> saves the metadata of files (Note: this will take a lot of time if you have selected a large number of photos). You can also turn on the option to automatically catalog settings-->--> write metadata changes automatically to XMP. Any tags written via this method is readable by any other photo app that I know.

• Don't know why it does not work

  Hi all
  

  Version details :
  ----------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  "CORE     11.2.0.2.0     Production"
  TNS for Solaris: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production

  Select * From Dual
  Where 'A' In (Decode( 'A','A','''A'''
    ||','
    ||'''B''','C','C'));
  
  Result :
     no rows

  Select * From Dual
  Where 'C' In (Decode( 'C','A','''A'''
    ||','
    ||'''B''','C','C'));
  
  Result :
   Dummy
  ------------
     X

  Please let me know why it does not work like that...
  
  Problem:
  
  When the input is 'A' then the State must be 'A' in (' a ',' B ')
  When the entry is 'C', should be 'C' ('c')
  
  
  
  Thank you
  Prakash P
  
  Published by: prakash on 4 February 2013 22:41

  Prakash wrote:
  Thanks knani.

  Is there an other way around to achieve this.

  Thank you
  Prakash P

  Use may be able to use the CASE.

  For more help, you need to explain your problem in detail...

• Why don't the button install clarification or work when I try to change my policy. It is a windows font

  Try to change a font Windows to Gabriola instructions say to click with the right button on the icon and then click on install but there is just no installation in the choice, it is an icon install at the top of the page but it will not lighten or react in some way

  Hello

  1. what operating system is installed on your computer?
  2. from which site did you download pack police Gabriola?
  3 have you connected to the administrator account?

  I suggest that you follow these steps and check to see if they help.

  Step 1:

  Connect to the administrator account, and then try installing the fonts pack.

  How can I connect as an administrator?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-log-on-as-an-administrator

  Step 2:

  If you use Windows 7, temporarily disable any security software, then try to install.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• How can I get my webcam built into my computer at work when he was working before I brought my computer to a professional to get fixed, don't know why it does not work?

  I try to webcam with friends or family on MSN and it says it is already in use. Ive searched the computer better I can and can't seem to find a problem. Help.

  Hello

  Make sure you have the latest vista drivers and software for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  and look for a manual while you're there on how to use your machine

• I have just subscribing to Adobe to convert the file "Adobe" for Word or Excel.  I don't know how to start to work.  Please advise?

  I am new to it.  Any subscriber to Adobe to convert the file "Adobe" to the word.  Please let me know what I need to do to convert a file from Adobe to Word format. Thank you

  Hello

  Could you please specify what exact product did you buy?

  Is - this service Acrobat or export to PDF?

  If there is an Acrobat you might check out the following link to convert a PDF to word format.

  Export of PDF files in Microsoft Office formats. Adobe Acrobat DC tutorials

  This link could tell about how to convert PDF in different MS Office, including word and other formats.

  Concerning

  Sukrit diallo

• Satellite M305D: No sound through the headphones but the speakers don't work

  Hey,.

  I have a M305D I reformatted and installed Vista Ultimate. I installed all necessary drivers.

  However, when I plug the headphones in the headphone jack I have no sound in headphones and the loudspeakers continue to play.

  I don't know if the socket has worked before I refomrated.

  So I can't tell if it's a pre-existing condition.

  Assistance on the issue of the helmet would be greatly appreciated.

  Hello

  Have you tested with another helmet?

  Maybe the little switch that is part of the headphone jack works not properly and doesn t switch between speakers and headphones.
  In this case the question would be related to hardware

  I m not very well if this problem could be related to a malfunction of the software, but it would be really interesting to know if the problem persists after installing the OS from the recovery DVD.

• still, mail. Identity.default.suppress_signature_separator set to True does not work, is their a new patch?

  I still have the '-' applied above the signature even after applying the fix to mail.identity.default.suppress_signature_separator that is set to true. Have tried running Thunderbird in safe mode, always have the same question. Have restart the computer several times, always have the same question. Reading a lot of messages on it, but don't say that it does not work even after you apply the hotfix does not. All of the suggestions. Pure install any extensions or add-in.
  User Agent Mozilla/5.0 (Windows NT 6.1; rv:24.0) Gecko/20100101 Thunderbird/24.6.0

  The fixed. completely removed Thunderbird, user and folder programming created by thunderbird profiles. Deleted file folder in windows. Rebooted PC. Installed Thunderbird. Add an account. Went to change only the settings in the config to remove the signature separator. He then worked.