doubt in extensions

Similar Questions

• By the tabs upwards there is a search function that I don't know if this is supposed to be there

  I can't add a picture, but if I could I would could be more useful. He has an i next to him, and when you click on it says update search bar.

  Is there a 4 icon colors whirl/reel? No doubt the extension of the default tab. You can disable/remove it here:

  the orange button Firefox (or tools men) > addons > Extensions category

  Is anything else?

• The following extensions are always safe to use with Firefox? Yahoo toolbar, McAfee WebAdvisor & Skype click on call

  I had these extensions installed since February 2015, when I bought my new computer. They always worked very well, but this morning I noticed that each say, «McAfee WebAdvisor/Skype Click-to-Call/Yahoo Toolbar could not be verified for use in Firefox.» Proceed with caution. All of these extensions have been download from their respective Web sites. Should I worry about this?

  In the future, Firefox refuses to run unsigned extensions. However, the first step being taken in Firefox 40 is to warn you that you have a little so you can check the updates and/or inform the Publisher of this impending problem.

  I'm sure that these three companies are aware of this change. What they need to do, is to submit their Add-ons for Mozilla for review and signature sometime before Firefox 41 is available and no doubt they will be.

  If they are not, please complain to them!

• How to remove extensions.delta from about: config?

  Hi there, my computer recently virus research Delta. I deleted all Delta programs on my computer and reset my internet options so that everything works fine now. I also have Webroot SecureAnywhere installed on my computer and a recent analysis said that I had no threats. However, when I go on the subject: config page, there are still several extensions.delta entries. I tried right click and hit reset, then by restarting Firefox and it didn't work. I also tried to delete in the prefs.js file and it did not work either. How can I get rid of these entries? Thank you!

  These preferences are to control the behavior of scrolling with the mouse and have nothing to see with the delta-search or other malware, so leave them alone.

  • https://wiki.Mozilla.org/Gecko:Mouse_Wheel_Scrolling

  You should be careful whit change prefs and make sure you understand what is their purpose.
  
  When in doubt leave them alone and ask for advice.

• Extension of Weather Channel 1-Click

  What happened to my 1-Click Weather Channel extension? His is no longer in my toolbar of Safari? I don't the is not in the Apple extension so was I got it from. Anyone know if they took out a reason any possibly malware or a virus. If anyone knows how I can get again please help me. I will not answer the tommorw if someone who can help much appreciated.

  Thanks to you all

  franick01 wrote:

  What happened to my 1-Click Weather Channel extension? His is no longer in my toolbar of Safari? I don't the is not in the Apple extension so was I got it from. Anyone know if they took out a reason any possibly malware or a virus. If anyone knows how I can get again please help me. I will not answer the tommorw if someone who can help much appreciated.

  Thanks to you all

  I have ever had on my computer because I use the weather app Live for this stuff, but a check of the Gallery of Safari Extensions does not, so that it could not exist more.  I doubt it had anything to do with malware or adware (it has no virus for OS X).

• Sign for 24 bit String extension

  Hey gurus of LabVIEW,.

  I'm trying to sign extend a string of 24 bits for an I32. For example, F0F0F0 (111100001111000011110000) would need one extra byte 1 appended to the left to produce FFF0F0F0 (11111111111100001111000011110000) and 333333 (001100110011001100110011) would become (00000000001100110011001100110011). I'm surprised there is no more examples of extension of sign in this forum, but maybe that's because it's too simple!

  I think I found a good example relevant here, but I can't understand how recreating the constant gray - I don't know what it means the constant/cable grey. I use LabVIEW 2012, so I'm not able to deposit in my block diagram. Although I doubt that it will be useful, I have attached a .vi with my various attempts, of which most are based on the code, I found on the forum. Thank you in advance for your time and the management! It is much appreciated.

  Thank you

  Leif

  Close to there. If you start with the data contained in the low bits, first multiply by 2 ^ 8 (to represent the high 24 bits data), then by 2 ^-8.

• New Firmware Canon (1.1.3) on Canon 5 d Mk III leads to problems with the USB Active extension cable

  At first I thought it was new version of Capture One Pro 7 or and the last update of OS X 10.8.3, but the camera is no longer connects to Windows 7 with a Capture One Pro 6.4.4 or 7.1.1. And this is always related to Windows 7. When I used a regular usb cable without the Extender everything has worked on computers and two software platforms.

  Please fix asap Canon and don't blame someone else cause this is without a doubt you do!

  You are right. After trying new camera on pc and mac, we tried a friends 5 d mkiii with the extension and it works. So, after spending several hours on it, I think it's the camera itself.

• support for files with extension .max-cannot open files

  I got a HP with Windows 98 computer.  When I got a newer computer, I downloaded the scanned files of visoiaire scanner on the new computer with windows XP.  Files are associated with the program file extension. MAX.  I'm unable to open files with windows XP.  I'm technically incompentent.  Y at - it a to change extension of files or open with Windows XP?  detailed instructions will be appreciated.

  That's what Filext.com about MAX:

  MAX file type is primarily associated with "PaperPort" of ScanSoft Inc. file: PPPAGEVW. EXE. Also captured by Visioneer Page view. If you have been sent a photo of a person in this format, try using the Viewer. If this does not work for you ask them to send the image in a format, you can display.

  This means that the Visionaire scanner connected to your old Win98 computer has been configured to save the files analyzed in this proprietary format.  The Viewer for this format - pppagevw.exe - no doubt has been installed on the Win98 computer, when the scanner was installed.

  Unfortunately, your new computer is that Viewer, you need to get here (go to the bottom of the page): http://support.visioneer.com/products/Tools/Utilities_2000_XP.asp

• How to change the extensions on several files with Windows 7?

  * Original title: Extentions

  How to change the extensions on several files with Windows 7?

  You hear no doubt, is that your movie software will only recognize certain types of image file formats.  If this is the case, you will need to reformat format files to any format PNG is recognizable by the software.

  Rather than we guess, please identify your «film» software

  Download and install IrfanView, which is a free utility for images.  http://www.IrfanView.com/

  IrfanView has the ability to read a great many formats of image files.  It can also convert image files formats.  And even better - for you - it can do all these things on a batch of files.

  As test, after I installed IrfanView, open one of your PNG files.  Now click on file > save as, and select the 'Save as Type' to be little matter the file type of your movie software will accept.  Save the file.  Make sure your movie software can accept the new file.

  Once you are convinced that you can modify files that you have in a format that you can use, use IrfanView

  File > Batch Conversion/Rename command.  If necessary, see IrfanView help on this topic.

• Adding extensions in bulk

  I'm pulling some really old files which were originally on an old Mac running Mac OS 8.6.
  They are text files, but do not have the extensions because HFS & HFS + has a file type that ID metadata it as TEXT (no doubt with the creator ttxt).

  Is there a quick and easy way to add a .txt extension to 67 all files in the directory?
  I tried ren *. *.txt but I got the error "the syntax of the command is incorrect."

  I'm pulling some really old files which were originally on an old Mac running Mac OS 8.6.
  They are text files, but do not have the extensions because HFS & HFS + has a file type that ID metadata it as TEXT (no doubt with the creator ttxt).

  Is there a quick and easy way to add a .txt extension to 67 all files in the directory?
  I tried ren *. *.txt but I got the error "the syntax of the command is incorrect."

  ====================================
  The following freeware can do the job.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Bulk Rename Utility
  http://www.bulkrenameutility.co.UK/download.php
  (Windows XP, Vista, 7, 8)

  Bulk Rename Utility tutorial
  http://www.bulkrenameutility.co.UK/tutorial.php

  Download and install the utility... (you can uncheck not...
  'Install the Extension of Windows Explorer' and 'install
  Samples)

  Once installed... Open the program and in the upper left
  pane, drill down to the folder your files are saved in.

  When you select the folder, the file names should
  appear in the upper right. (You will notice... There is a)
  "Name" column and a "New name" column... so you
  can see the changes that will apply.

  First... to... Actions / select all... (you will not see
  changes and you can't rename files unless
  are selected / highlighted)

  In the 'Extensions (11)' section of the screen... Open
  the window menu and choose 'fixed'... now type your
  new extension in the field empty.

  When the column new name seems correct... left click
  the button "Rename"... then... OK / OK.

  The name change occurs instantly.

  FWIW, you can experiment with a few samples
  (copies) first just to get oriented with the user interface.

• How to create and update the thumbnail of each layer on the extension Panel on all actions of the user on the artboard

  I am in the process of creating an extension where I need to display thumbnails of all layers and work plans.

  But in addition I want to update the thumbnails on each user of the action occurs on the artboard. (just the way that in the standard Layers dialog box).

  From now on, I use imagecapture() API to get the images of work plans and diapers. Please suggest if there is somewhat faster and easier to achieve.

  Any help is very appreciated.

  No doubt, DOCUMENT_CHANGED event raised when activeDocument under tension.

  However, I found below in the script of ai_hostadapter assistance.

  /**

  * Sent when a change occurs in the selected art objects or a modification of the work as to move a point on a path occurs. You cannot distinguish a change in selection of a change in editing work. There is no that means that one or the other. Receive this does not necessarily mean that returned all of the selected objects, as AIMatchingArtSuite::GetSelectedArt(), is different.

  */

  AIEvent.ART_SELECTION_CHANGED = "Selection Art changed notifier";

  I think you can catch the event using kAIArtSelectionChangedNotifier when the content of the document has changed.

• Unable to load the extension for Rotator easy - no CC2015 program in the extension manager?

  I try to install Easy Rotator (dwuser.com) in Dreamweaver CC 2015. I run the program on a nearly identical machine with great success, but can not get the zxp file to be allowed to be charged on this machine. I use windows 7 pro and don't see any CC 2015 programs listed in the extension manager. I heard that Ext Manager cannot be used with CC 2015 but can't get anything to work... Help, please... Thank you!

  Unless EZ Rotator is available on the page Adobe modules, you can not install it in 2015 CC because Adobe has stopped the extensions Manager.

  https://creative.Adobe.com/addons

  You can - maybe but not guaranteed - install it with a 3rd party DMX Zone EM, but I doubt little.

  FREE DMX Zone extensions Manager

  http://www.DMXzone.com/go/22670/DMXzone-extension-manager-for-Dreamweaver

  
  

  Nancy O.

• After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but not joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing work

  After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but still no joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing works. WHAT?

  Print to Adobe PDF? Why the * & ^ * & ^ V_ $ didn't pay a lot more money to Adobe for an Adobe program that does not work with another Adobe program? Oh, right--they want to move me up (buy) the new Adobe graphics programs. I'll keep sweating this point and will no doubt wind up forking over a thousand$ $$ or so for 'new' stuff I don't need.

• Shape Extension client or supplier.

  Hello
  
  I need to customize the form customers / suppliers, but I am fresh in the OPS. I created and developed/deployed new forms OAF.
  but I do not know the steps of the extension of the OFA. If anyone knows, kindly share. enjoy the steps, how can I open xlm oracle forms in jdeve to measure and deploy in oracle.
  
  Thanks in advance.
  
  Published by: Arshad Hashmi on December 7, 2012 20:54

  Hi Arshad,

  I think that the ID is fake, the other way to find the ID of the button is, go to the page of the OFA, and right-click on the browser
  check out the source option, it will give the definition of the (html) page, now search with the name of the button. It will have the ID attached.

  Try and tell me if its does not work / if you have any doubts.

  Had

• Doubt Siebel 8.2 installation Solaris 11

  We have implemented a new Siebel environment on 64-bit Solaris 11 based on these 3 possibilities:
  Public sector, Siebel , * eService * and application of event management with the CTI (Cisco).
  
  Exact version of Siebel is still being investigated. But as the operating system Solaris 11, Siebel will be either 8.1.1.8 (for 8.1.x) Gold 8.2.2.1(for 8.2.x) that can be confirmed from the NHRP.
  
  Please read the questions below and see if you can help us with your thoughts:
  
  For 8.1.1.8
  (1) if we opt for the 8.1.1.8, requirements of Web server (iPlanet), tell the SRSP8.1 of the document below.
  
  Oracle iPlanet Web Server 7.0
  (At base of SPARC), Service Pack 4 or higher version Oracle Solaris 10 GA with SP6 or greater
  (32 bit)
  
  So do you mean that iPlanet will support Solaris 11 too, or only more Solaris 10.x release? Had evil in our previous project with the same language for JRE version where the doubt.
  
  For 8.2.2.1
  (2) if we opt for 8.2.2.1, I would download the below delivery pack (correct me if I'm wrong).
  
  Business applications Siebel for sector Public Media Pack for Oracle Solaris on SPARC (64-bit)
  
  but it would contain event also? I have not found it in the Read me section.
  
  
  Would be helpful if you can clarify these doubts.
  
  Thank you
  Sam

  Sam,

  1 iPlanet statement is valid for iPlanet version 7.0 service packs on Solaris 10, it is not valid for Solaris 11. I could not find information about iPlanet 7.0 on Solaris 11 as a platform certified for the version of the Extension of the Siebel Web 8.1.1.x server. You will need to request an official confirmation of Support Oracle about this certification because we don't know.

  2. I checked a 8.2.2 Public sector facility and includes Siebel Marketing, which has the object Events Manager. So the media pack that you mentioned has the event management:

  http://docs.Oracle.com/CD/E16348_01/books/EventsMgmt/EventsMgmtInstall2.html#wp1004804

  Thank you

  Wilson