Change the resolution and resize the icons on the Windows desktop

Similar Questions

• I change the window of my laptop HP 635 to Windows 7 ultimate and can not find drivers drivers

  I change the window of my laptop HP 635 for window 7 ultimate and impossible to find some drivers. The drivers are listed below with their hardware ID

  Ethernet Controller
  PCI\VEN_10EC & DEV_8136 & SUBSYS_3577103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_3577103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  Network controller
  PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01
  PCI\VEN_168C & DEV_002B & SUBSYS_1461103C
  PCI\VEN_168C & DEV_002B & CC_028000
  PCI\VEN_168C & DEV_002B & CC_0280
  PCI device
  PCI\VEN_10EC & DEV_5209 & SUBSYS_3577103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_3577103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  Hello:

  You will need:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5086719&prodNameId=5086720&swEnvOID=4061&swLang=13&mode=2&taskId=135&swItem=ob-93650-1

  This:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5086719&prodNameId=5086720&swEnvOID=4061&swLang=13&taskId=135&swItem=ob-108903-1&mode=3

  And this:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5086719&prodNameId=5086720&swEnvOID=4061&swLang=13&mode=2&taskId=135&swItem=ob-93202-1

  Paul

• Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode.

  Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode. When I start the browser is not open and it displayed a message
  Mozilla Crash Reporter

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; InfoPath.3)

  Go to the address on: plant and tell us your last accident IDs. Then we can watch data specific to your accident and have a better idea of what is causing the problem.

  Given that everything goes well in safe mode, one of your extensions or themes is at fault. See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems to figure out which one of your modules is the cause of the crash.

  Start here: https://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes#The_problem_does_not_occur_in_Safe_Mode

• Is it possible to keep the same e-mail account but change the Windows Live ID

  Change hotmail (Windows Live ID)

  Hello

  I just wanted to know - is it possible to keep the same e-mail account, but change the Windows Live ID. I know that the password can be changed but how do I change the ID and keep the same account. Thank you

  Hello REMY Senguptta,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• 00000646 error code when you install windows updates and upgrades security for the windows desktop.

  When I try to download windows office updates and security of office windows dates I get an error code 00000646. I don't use windows desktop and I did not sign up for the windows desktop. could this way is not not the administrator of windows on my computer desktop, this is the reason why I can't download these dates?

  Hello

  Here's what I recommend:

  1 disable UAC. Down comes the restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications.
  6. follow step 3.

  Let me know your results.

• "Due to a problem not identified, Windows cannot display Windows Firewall settings" when you try to change the Windows Firewall settings.

  Original title: WINDOWS firewall

  I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?

  IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.

  Documentation AVG Internet Security 2013 States:

  Recommendation:

  Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.

  You can read the AVG documentation by clicking on this link, and see section 6.5:

  http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
  
  So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems.  Choose one or the other, but not both.

  I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.

• Change the Windows startup screen

  When Windows Vista starts there are three icons for my listed users.    How can I change the order in which they are presented?   I want 3 icon to appear in the middle.

  Hi, Peter,.

  There's a third-party utility.  This is a tutorial on moving points around in a login screen

  http://bfarber.com/moving-items-around-in-a-login-screen-t6911.html

  Resource Hacker (freeware)

  http://angusj.com/ResourceHacker/

  How to change the Windows 7 logon screen background

  http://www.Novell.com/communities/node/11748/how-change-Windows-7-logon-screen-background

• U2415, around the gap between the Windows desktop and the edge of the monitor (bezel)

  Hello

  I have a Dell Ultrasharp U2415. I've read all the FAQS and I know I have to perform the SUBMISSION, but before doing so, I just want to know if it is normal to have a gap between the Windows desktop and the edge of the screen. If the Windows desktop is not covering or fill the entire screen. There all around the smaller than a 1/4 "gap between the edge of the windows desktop on the edge of the bezel of the monitor, and this model has almost no bezel. The graphics settings in Windows 10 are set to use the native resolution of 1920 x 1200 monitor. I tried with different computers (all windows 10), and the drivers are up to date. The monitor is connected via HDMI since I don't have portable computers not with DP interfaces. Laptop computers have Intel and ATI video cards. I have check the put option to scale on the video card software and it is set to 100%. So, is this gap normal? Is the edge Office Windows 10 supposed to touch the physical edge of monitors?  If the gap is not normal, I will perform the integrated test.

  TIA!

  Based on the YouTube comments, which seems to be normal. "But you must run the APPLICATION to see if the"smaller than 1/4"gap" appears. If Yes, then we can say that it is normal. If this is not the case, then some settings of the operating system is the culprit.

• Why first changing the Windows 7 display settings?

  Hi all

  I am running Windows 7 on a brand new i7, two monitors and a nvidia Quadro 4000. I have most of the Windows display settings (Aero-stuff) turned off to speed up Windows performance.

  When I opened the first, first changes the windows settings - something - display. Both monitors flicker black and the Windows taskbar change color and opacity, as if someone had gone in the command menu customize and changed my look colors and display.

  The question is this - because the first is changing my display of the Windows desktop, other programs are still using the previous (correct) display settings. Causing other programs to crash whenever I try to alternate between them. It translates into me being able to run the first to him alone, which significantly slows the multitasking.

  WHY FIRST CHANGE MY SETTINGS IN WINDOWS?

  Better yet, how can I stop this? I can't find any project, General or sequence settings that give any hint.

  If I need to change the settings of Windows customization to match first is to choose himself, it's good, but I still need to know what are these parameters, so that all programs use.

  Thank you

  -Matt

  I use a full Win7 Aero desktop computer on my Quadro 4000.  I had a problem similar to yours; "Aero" turned off when Pr and then open 'Aero' turns after the release of Pr.  If you go to the NVIDIA Control Panel, under Management 3D settings, on the global settings tab, select a color deep for 3D applications and assign the disable.  Then check that Pr uses this setting by looking at the Pr entry on the program settings tab (if the Pr does not list programs you can Add this).

• How can I move all the information of the computer without having to hit F1 or F2 at startup and go directly to the windows desktop in Windows XP

  How can I move all the information of the computer without having to hit F1 or F2 at startup and go directly to the windows desktop in Windows XP

  see if this article applies to your question:

  http://www.computerhope.com/issues/ch000301.htm

  a method to determine if the motherboard (cmos battery) battery should be replaced is to monitor the time in the windows desktop.

  If windows does not have the exact time, then the motherboard battery is low and must be replaced.

• I get 656 error Code when I try to download my updates to the windows desktop.

  I get 656 error Code when I try to download my updates to the windows desktop.

  Do you mean * 646 *?

  See:

  http://support.Microsoft.com/kb/2258121

  Very popular.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How do you put applications on the windows desktop as a shortcut form?

  How do you put applications on the windows desktop as a shortcut form?

  You can not put shortcuts to applications from the store to the desktop. Press the Windows key when it is on the desktop to quickly return to the start page.

• Help - installed VMware and Windows 7 and I can not see my Windows desktop

  Hello

  This could be really basic, but I can't seem to get by:

  I just installed VMware 8 on a new Macbook Pro (OS El Capitan).

  I then installed Windows 7, apparently successfully, all the way up to Windows installation was finished and I went to open the virtual machine for the first time.  The office opened very well, but when I went to maximize this mode full-screen, I essentially disappeared.  She is obviously still ongoing, as he urged on antivirus McFee, that I installed it successfully.

  In the library, the virtual machine appears grey, with a basket and McFee icon.

  

  I tried to uninstall the machine and install again, but the same thing happened...

  Any ideas?

  In fact, here is a better description of what's going on...

  You are in mode of "unity".

  It is a "cache" mode the windows desktop and allows access to applications as they were Mac apps.

  In your menu bar, there is an icon for the merge, and you can launch Windows apps from there.

  Alternatively, you can simply use "Single window" or mode "full screen" for the traditional windows back office.

  The button to switch is in the "View" menu

  Hope that helps!

• Is transparency in menu bars and the address of the browser there a way to make stronger without changing the windows settings?

  Using FF 15.0.1

  Is there a way to make the menu bar and bar addresses more than a solid color without having to change the settings of transparency in windows 7 in the area of color settings. Don't want to change everything to windows just fire fox. So is there a way to do menu bars and address more than a solid color?

  Thank you
  Dave

  Try a character solid with a color that suits you.

  • Personas for Firefox | Gallery: http://www.getpersonas.com/en-US/gallery/Solid

• Is there a setting I need to change the windows Defender because my laptop and an iphone4 work together properly on the internet, and they seem to take turns?

  I contacted my internet provider several times in recent weeks and they haven't a clue what's wrong, so they want to send a technician for £180, but a friend had the same problem and contacted PCWorld and they said that it is to do with the security setting so he then contacted McAffee and they changed the type of security on the router WPA2-Personal wireless to another and apparently it works fine now so do you think that's what I have to do? Sorry if this is real confusing :) kind regards D

  Isn't it clear what your problem is, but if you use McAfee (based on what I read on other forums) you should probably uninstall or disable Windows Defender on your laptop.  Windows Defender and McAfee may not work well together as MSE and McAfee should not be used on the same computer.

  Some older portable computers (such as my Dell Inspiron 5100 with XP Pro 2004) does not connect to a WPA-2 wireless router - mine only works with WEP and WPA.  Maybe it's the cause of your problem, but of course if your laptop is new, it should work fine with WPA-2.

  Given that your problems are not associated with MSE, why not ask your advice in the Microsoft Windows Forum at http://answers.microsoft.com/en-us or on the website of the manufacturer of your router and maybe they can help.

  Good luck...