down load very slow, what is the problem?

Similar Questions

• Down load very slow video ing, the circle of flow right guard will perhaps 1 second video then back streaming

  How can I download and play better

  This happens if you have a slow to the content host connection - even if you have a fast internet connection, you can still have a slow connection to the host.
  Try to find another place to see videos of.

• My projects always run very slow, what would be my problem?

  Hey everybody,

  For weeks, I worked in first and everything is still working very slow: most of the time I have to restore, even when I don't have no complex sequences (and takes forever).

  I'm not well edition 4K or something special (50 fps), but even that shouldn't be a problem with my Macbook Pro.

  
  

  My computer specs:

  -2.8 GHz Intel Core i7

  -16 GB of ram

  -NVIDIA GeForce GT 750M 2 GB

  I've tried the "'Mercury Playback Engine software only", and it does not really help. "

  Settings that I use:

  -RGB curves

  -Stabilizing Warp

  -(HLS) color balance

  Can someone help me?

  Tutorial on Vimeo https://forums.adobe.com/thread/1567965 codec

  Information about the codec & Format, with 2 links inside for you to read http://forums.adobe.com/thread/1270588

  MOV is a wrapper, which is inside YOUR package - exactly what is on the INSIDE of the video you are editing?

  A report with details of codec your file, use the following programs... A screen capture works well for people to SHOW what you do

  https://forums.adobe.com/thread/1070933 for instructions of screenshot

  Free programs to get information on PC/Mac http://mediaarea.net/en/MediaInfo/Download files

• When I start creating adobe photoshop logo appears and never stops loading... What is the problem?

  I can't start any program creative suite from adobe. This image appears and never stops loading. What is the problem?

  Mac https://forums.adobe.com/message/5470608 spinning wheel

  -Similar to Windows https://forums.adobe.com/message/5853430

• I have a 4TB vdisk and it occupies space is 2 TB and the remaining space is free but it is very slow, what could be the possible reasons and give the solution for this.

  I have a 4TB vdisk and it occupies space is 2 TB and the remaining space is free but it is very slow, what could be the possible reasons and give the solution for this

  Assuming that you are talking about disk space from in the guest OS. You are probably using an MBR partition table, which limits the maximum usable disk space to ~ 2 TB. In order to use the entire disk space, you need a GPT partition table.

  André

• my computer runs very slow, what can I do?

  my computer runs very slow, what can I do?

  * original title - performance and security in Internet Explorer *.

  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• What is the problem with kernel_task?

  Hello everyone,

  What is the problem with kernel_task?

  I explan: Macbook Pro early 2011 LION OS up to date.

  I bought 8 GB on China supplier, CRUCIAL...

  Well, I got a lot of kernel Panic. Usually, he is involved material, taken on my RAM, back is the original, so still have in the kernel_task to 300% CPU monitoring followed up to 500%...

  Well, I went back to a clean install, a manufacturing one, with nothing.

  Wish I 'd' diagnosis of the equipment, never went on, test it on safe mode, disable all extensions, then nothing:

  Sometimes the kernel_task crazy sometimes not...

  Good read a lot on the internet but nothing has worked... I went to the Apple store in DIJON, they do not have diag any hardware problem, and all my App are approved Apple.

  Used to play the eve online thought, therefore, the graphic chipset pourrait was damaged, so when it's too 'hot' the mac gets crazy... but I expected crazy restarts and that sort of thing.

  I bought a manual, there is no french support to the opening of Apple, but found nothing about my question.

  So what?

  I bought something conivient on Support and friability so today he's dead?

  What should do?

  If you still get the panic of the core, thanks to post separate 2 or 3 of the most recent as answers on this.

  Reports of kernel panic: "/ Library/Logs/DiagnosticReports".

  http://support.Apple.com/kb/ht2546>

  http://support.Apple.com/en-us/HT200553>

  The panic report should have "panic" in the name of the file.

  Kernel panics tend to come from 2 sources

  • Material:
    • 3rd party RAM is the most common.  Replace or return the original is usually the solution.  Crucial and MacSales.com were 2 of the most reliable sellers for the initial quality and guest without question of replacement.
    • Broken USB cables or USB devices have turned up as the 2nd most likely material number.  Usually remove all USB devices, or replace the keyboard and USB mouse to see if it's one of those existing.
    • There are a few Macs with graphics chips that have failed.  I don't know that they exist, but do not know what model Mac had these chips.
  • Software
    • antivirus protection.  It is the number 1 most panicked related software cause.  More OS X does not need antivirus, because it has its own built-in protections http://www.thesafemac.com/mmg-builtin/>.
    • Other core 3rd party extensions are a distant 2nd.
    • NOTE: not all 3rd party kernel extensions are causing problems, but when there is a kernel panic, it's the first thing to look at.

  If run kernel_task is often caused by core 3rd party extensions.  It can be caused by an application program, but then the Applications-> Utilities-> Activity Monitor show "As" an application that consumes a lot of CPU, disk IO and network IO in collaboration with the kernel_task using lots of CPU.  If there is no application burns the CPU at the same time, so it is almost always a 3rd special part of the kernel that was originally the use excessive CPU kernel_task.

  Start in safe mode is usually a test to see if 3rd party extensions are part of the case.  But in safe mode is not how you run your system, because it also loads less advanced graphics drivers and other components.  Safe mode is very conservative, but it's a great way to see if the 3rd party software is at fault and have started when 3rd party software panic the system at boot.

  The contributors to the forum long strongly warn against getting 3rd party anti-virus, cleaners Mac and additions increasing.  This class of 3rd party additions have shown time and time again to really harm performance, remove things they shouldn't and cause a kernel panic.  Especially right after an OS X update to a new version.

• Brushes to appear in my library tab but say "this brush format is not supported in Photoshop." What is the problem? I use PS CC 2014.

  My Adobe Capture brushes appear in the Library tab in Photoshop with this message: "this brush format is not supported in Photoshop."  I use PS CC 2014.  What is the problem?

  Enare,

  None of the Adobe tools use the same rendering template, each has its own format of brush and the brush characteristic, so not every brush works in all applications.

  In other words, you cannot use brush in Illustrator into Photoshop or sketch, or a drawing brush in Photoshop or Illustrator. Rendering template in Photoshop just can't handle what may the sketch, it works in a very different way. That's why when you create a brush in the Capture, you must choose which tool you will target. If you are ultimate goal is to use the brushes in Ps, then you need to limit yourself to the targeted Ps brushes when you get to the Style section (look for the Ps icon at the top left of the section, after the Sketch in Photoshop brushes).

  When you save a brush, you are redirected to a screen where it can be edited/named). This is also where you can see which brush to work with each application. The first three are sketches of Photoshop. If you scroll down you will see the brushes for Ps and AI. When you save, except for the application in which you will use it. Let me know if that clears things up for you.

  Try this with one of your brushes:

  Go to your library and choose a brush

  Tap the change (square with a pen). This will open a Visual list of brushes

  If you want to use a brush in Photoshop, choose one of these brushes (tap the circle to check), name it and save it. It will save in your library as a brush in Photoshop and as soon as it syncs you should be able to open is there from the library panel.

  Let me know if that clears things up for you.

  Sue.

• Please help: classes load very slow and takes almost 100% CPU and 1.08 GB memory

  The total number of pages is 129. We used the Captivate 5.5. We have several Web page widgets and a few videos. I tried out the web widgets and videos, however, the course still loads very slow.

  I would appreciate if someone can give somve suggestion.

  Thank you very much.

  What is the file size of the swf file?

  What is the percentage that you use for the preloader?  Edit > Preferences > project > start and end

  Slow loading happens on other computers?

• What is the problem with my trigger :(

  Hi friends
  
  What is the problem with this trigger please
  

  SQL> select object_type from user_objects where object_name='CE_STMT_INT_TMP';
  
  OBJECT_TYPE
  -------------------
  TABLE
  
  SQL> create or replace trigger ce_stmt_int_tmp_trg1
    2  after insert on ce_stmt_int_tmp
    3  for each row
    4  begin
    5      :new.column7 := 'checkno_test';
    6  end;
    7  /
  create or replace trigger ce_stmt_int_tmp_trg1
                            *
  ERROR at line 1:
  ORA-04084: cannot change NEW values for this trigger type

  Thank you very much

  I guess you mean that SQL * Loader is insertion of the value of the column, not not to date. You can override the value SQL * Loader is the insertion in a level line BEFORE INSERT trigger.

  Justin

• Small color wheel keeps going in a lot of time and activity stops.  What is the problem and you have to?

  Chromatic wheel keeps going of and activity stops.  What is the problem and the solution?

  You meet the SBBOD (the spinning beachball of death).

  This means your MBP is trying to make his way through some task or tasks that he doesn't have sufficient resources to effectively or if you have a software problem that interferes with the efficient completion of the task (s). Common causes on this discussion:

  1. "antivirus" software from third-party manufacturers
  2. different types of cleaners 'misguided' and other dreck (for example, CleanMyMac, MacKeeper)
  3. trying to run too many processes for the hardware you have.
  4. Insufficient RAM for the processes that you try to run
  5. Hard drive that is too full
  6. CPU or hard drive that is too slow for the software you are trying to run.
  7. hard drive that is running out.

  Download and run Etrecheck http://www.etresoft.com/etrecheck and send the output to an answer here, and we can take a look and see what the problem is.

• What is the problem using Throwable in production code

  Hello

  I read everywhere that you use Throwable to print the call stack when debugging. Now, my question is what is the problem if I use throwable in my production code as well? What is a drawback with Throwable?

  I like it! It gives me an error message and the name of class. It will be a nightmare for me to catch possible exceptions in my method.

  Another question, if Throwable is not good for production code, how do I change my code of Throwable individual exceptions when passing code debugging in production?

  Any advice will be highly appreciated.

  Thank you very much

  Nitin

  no problem in usage, but the expected exceptions should be taken by the defined catches.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

  Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

  I would be out of system repair and safe boot mode:

  Start your PC, just before the system loads the Windows operating system; Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• Every time I try to open my project Premiere Pro at the hearing, it crashes. What is the problem?

  Every time when I want to open my first Audition pro project to work on audio, Premiere Pro crashes.

  What is the problem?

  Thank you

  Maruf

  You should ask Audition CS5.5, CS6 & CC and/or http://forums.adobe.com/community/premiere/content

  If you ask in the Premiere Pro forum, you must add a LOT more information (don't give any more information here, this is the wrong forum)

  -Premiere Pro video Editing information FAQ http://forums.adobe.com/message/4200840

  Exactly what is on the INSIDE of the video you are editing?

  Information about the codec & Format, with 2 links inside for you to read http://forums.adobe.com/thread/1270588

  A report with details of codec your file, use the following programs... A screen capture works well for people to SHOW what you do

  http://forums.adobe.com/thread/592070?tstart=30 for instructions of screenshot

  Free programs to get information on PC/Mac http://mediaarea.net/en/MediaInfo/Download files

  The forum of cloud is not on the use of individual programs

  The forum of cloud is on the cloud as a delivery & installation process

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it says all communities) to open the drop-down list and scroll