DPS Goto

Similar Questions

• 'Back' button of coding

  Is there a way to code a DPS button to go back in a DPS 2015 app? In other words, say that I type in an article and a desire to have an iconic X for a back button that acts in the same way as the return function on the main menu of DPS 2015. It would be nice to avoid that the user to touch the screen for the pop-up menu bar to return back. Make sense?

  Is it possible to get?

  Moved the Forum of Digital Publishing Solution.

  Yes, you can use the same goto: / / URL for it than in the previous version of DPS: goto://FolioNavigation/lastview. Note that right now this is supported only in iOS Viewer, it is not supported on Android or Windows at the moment.

  Neil

• After the CS via goto://ApplicationViewState/nameOFcs the CS overlaps Statusbar iPad

  Hello world

  I use the last DPS build 32.4. When I create a link inside a folio with goto://ApplicationViewState/nameOfMyCS front load and I get out my folio as I want. But then the front overlaps the status bar of iPad (iOS 8.1). I have to reload the app or reload the CS to the library by default in order to have the CS make properly.

  
  

  I can't show you the screenshots here unfiltered since the app is in development but via private message to Adobe employees.

  
  

  
  

  This bug has been reported to Adobe WWDs and I hope it will be addressed at some point.

• Link to goto navigation toolbar does not

  We create a custom library, and I want to be able to link the html code of the library to one of the icons custom navigation toolbar we created.

  I tested the custom icon works but I can't seem to HTML code of the custom library, we have created a link to it.

  I tried to use < a href = "goto://ApplicationViewState/contentviewer" > element content viewer toolbar open < /a > and < a href = "goto://contentviewer" > toolbar of the viewer open point content < /a > or work.

  If I change the link http://www.Yahoo.com it works

  This is the navigation screen point from the manufacturer of the app. (v32)

  

  Goto: / / URL does not work in custom locations. Use instead the goToState API: Adobe DPS - library and store SDK 2.32: adobeDPS-ApplicationState: JsDoc reference.

  Neil

• Pass parameters in a DPS application

  I have an app from the DPS with 2 slots. A slot contains a built-in code that is supposed to show a list of goods. A slot contains code that launches an external site in a frame within the DPS app.

  In accordance with article API Marketing consumer news | Adobe Developer Connection, it is possible to pass parameters to an external application to a DPS application.

  I'm running a problem. In my external site, I try to call the DPS application like so dpsapp://v1/slot/storefront?path=/content/test.pdf via a button.  What I noticed is that when I do that, the soft switches on the side window but urlPath queryingthe or urlQueryString returns a null value.

  It seems that I can't pass a parameter to the DPS app within a single application. If I load the external website in Safari, I'm able to query for the parameters.

  Am I missing a step here or isn't it possible?

  Thank you

  You need manage paths... the first is when the application has failed.  In this case, just use the code in the previous post ('companyName' change 'path').  However, if the application worked, but it is backgrounded, so you must have annexed a listener for the event event.

  That is to say. adobeDPS.configurationService.applicationContextUpdatedSignal.add (this.updateContext, this);

  And then your method "updateContext" navigate the urlQueryString as previously indicated.

  Additionally, make sure that you have included "showcase" in the "name of the Goto link" when you set your custom button.

• Adobe DPS - programming link to a layer and close the popup button

  Hello world

  Two quick questions and hope that you can advise

  (1) how to link a button on a layer to a contextual layer in article - IE: report on the base layer and the material to a pop-up when you click another layer to display.

  (2) exactly how should I ask a button to close a layer and return to the starting point (if it is not an object of State Multi?-say a Photo you want to see in a larger size to appreciate it...) Is it just planning to hide this layer or another way?).

  Thank you: Daz

  You must be a subject of multiple State, MSO, which contains the information of your popup. This will trigger from an action of tap from a button or a hyper link. In my MSO pop-ups, I created the first State with an empty object. The State that contains the pop-up will have a button/hyperlink using one pass to the action of the State pointed to State 1, the object is empty.

  Learn more about WHO to:

  Digital Publishing Suite help | Overview of the interactive overlays

  Digital Publishing Suite help | Best practices for creating overlays

  DPS App advice

  Google

  Google

  If you want to take the user to the page that referred to another page/article add a goto://FolioNavigation/lastview at the end of your close button action. Test this on your iPad, because it does not work in the overview of the Office of the ID.

• Create a button with a goto command?

  Hello

  I was wondering if it is possible to create a button with a goto, similar to the 'back' command - button: goto://FolioNavigation/lastview?

  Tim

  I think he's asking a DPS feature that is similar to the following in a browser. After that you go to a page and then click on the back button in a browser, the next button becomes active. That is not taken in charge in DPS applications. Kafoussias can correct me if I misunderstood the question.

• Button to the previous article for the publication of DPS

  Don't know if it's better in indesign or dps...

  using indesign cc

  Is it possible to have a button go to the article previously posted?  Not necessarily a specific article, just the one that was seen last?

  Create a button with an action to go to the URL: goto://FolioNavigation/lastview

  This button could imitate the previous button in the navigation toolbar.

• GoTo another thread

  Hi, this is my first post OR so if I get something wrong please don't flame me

  In teststand, I have my mainsequence along another thread (the other thread is used to look for keyboarding)
  If I push escape on my keyboard, I want to use the goto command to take me to the cleaning section in the mainsequence so to end the test and clean running.

  The closest, I managed to get is teststand raise an error that the step that I'm going through is not in the current sequence.

  Here is the code:

  So Locals.TestRunning
  Download labview get keyboard (input)
  If Locals.keyPressed is 62

  GoTo<- i="" want="" this="" to="" say="" goto="" mainsequence="" thread="" to="" whatever="" point="" i="" want="" (cleanup="" in="" this="">

  End

  End

  Any solution or another way to do it will be highly appreciated

  You can pass the context of the sequence to this "watchdog" when starting of execution and call then put an end to execution. This is not really the best solution, but perhaps one that suits without need to rework these sequences and modules of code...

  Norbert

• Tiara script: Goto &amp; continue do not work

  Hi all

  I have trouble using 'Goto' and 'Continue For' lines in the script of DIAdem.  Does anyone know if these are disabled in DIAdem or if I'm doing something wrong.  Take for example these examples below:

  Goto:

  option explicit
  dim a,b
  b=""
  for a=1 to 50
    if a=10 then goto Printer
    b=b&" "&a
  next 'a
  
  Printer:
  msgbox(b)
  

  an error directly after the text "goto".

  Continue:

  option explicit
  dim a,b
  b=""
  for a=1 to 50
    if a=10 then continue for
    b=b&" "&a
  next 'a
  
  Printer:
  msgbox(b)
  

  An error right after the text of "continue".

  Please enlighten us on that.  Thank you!

  Hello GT_Mark,

  VBS is only associated "GoTo" "On Error Resume Next '. In all other cases "GoTo" and "Continue" are not part of the VBS command set. (Please keep in mind that the tiara supports VBS and no VBA or VB.) Your example can be changed as follows:

  Option Explicit
  
  dim a,b
  b=""
  a = 0
  do while (a < 10)
    a = a + 1
    b=b&" "&a
  loop 'a
  
  msgbox(b)
  

  Greetings

  Walter

• GoTo cleanup after N breaks down?

  Instead of goto immediate cleaning sequence fail, suggestions how to customize a process template to implement a goto Cleanup after incidents of N?

  I think I can check the number of fails in a ProcessModelPostStep and flag on certain limits - but but don't know the best way to initiate a "goto cleanup" in the process template?

  Thank you.

  Well, it's another story so... I assumed you where talking about termination and go to cleanup - sorry about that.

  You can try to add a statement to your ProcessModelPostStep that defines the following:

  ThisContext.RunState.Caller. RunState.GotoCleanup = True

  And is preconditioned to your flag and to prevent it from running in the process template:

  ThisContext.RunState.Caller. RunState.StepIndex > 0 & ThisContext.RunState.Caller.RunState.StepGroup! 'Cleaning' = & ThisContext.RunState.Caller.IsProcessModel! = True

  I didn't test it with any use case, but you might be able to get something like this works with your test logic.

  -Jack

• Read configure-&gt; Station Options-&gt; immediately Goto Cleanup on failure Checkbox setting sequence

  TestStand 3.5, how to programmatically read the State of the configuration-> Options of Station immediately-> Goto Cleanup box sequence failure?  How would you program this value?

  Engine.StationOptions.AlwaysGotoCleanupOnFailure

• State of the unknown connection, DPS and missing permissions to Trustedinstaller

  Unknown connection status,
  DPS and
  missing permissions to Trustedinstaller

  Hi, I have a problem that my computer cannot connect to the internet.

  A bit strange, because when I opened the dialog box to connect to the network, I am told that the computer is already connected to full speed.

  But warns the network icon in the status bar "unknown connection status. The dependency service or group was able to start. »

  And when I open the Connection Wizard to the internet there is a message "The wizard cannot continue" and the following details of tecknical (there is a version in French):

  "The component GUID: {7071ECA3-663B-4BC1-A1FA-B97F3B917C55}.
  The component file: [C:\Windows\system32\connect.dll]
  Error: (0x800706BA) .

  Additional info:
  Impossible to detect an Internet connection.

  This frustrating experience came from the past months. I was busy at the time tried several different antivirus programs, one after the other. I uninstalled this antivirus after trying for a month, then continued to install the following, just to see if it was the ultimate antivirus I want really to buy and use. Then, when I installed the following antivirus, I was told that it was not necessary for me to first uninstall the old antivirus. The new installation of the antivirus program could take care of this.  Then I went to install Kaspersky Anti-virus, and after that, I tried Bitdefender, under the presumption that the installer will take care of uninstalling the old antivirus.

  I don't know if this actually produced some kind of conflict, or if it's just my imagination, but it is somewhere at this point that the problem started. Maybe something happened in the registry?

  1. unfortunately I have no point of restoring a useful, probably because I had not booked enough space on my system.

  2. I tried the command
  Ping www.google.com
  cmd.exe as administrator, but no, he had no contact with the internet.

  3. I tried the ipconfig command and got two IP addresses correctly as a response, other media have been disconnected.

  4. I also tried the commands
  netsh winsock reset catalog
  netsh int ipv4 reset reset.log
  netsh int ipv6 reset reset.log
  and told him after that to restart the computer, but it did not help.

  5. of course, the first thing I did to try to get on the internet was trying to diagnose and fix, but it is still to this day always says "Network Diagnostics cannot run because the Diagnostics Policy Service is not running" I then have the option to open the Service Control Manager to manually start the diagnostic policy Service. But when I try to do it gets stuck and the DPS does not start.

  6. in my research on the internet I came across some interesting information in Microsoft Answers referring to
  http://support.Microsoft.com/kb/943996
  It turns out that, in this article, which...
  "For service"Service of political diagnosis', the problem may occur when the Trustedinstaller account is missing permissions for the key below:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS\Parameters

  Is the necessary permission: full control, read. »

  Comparing with my Win7 machine, it turns out that indeed these two permissions are checked in this registry key.

  Open the registry editor in the Vista system confirmed that Trustedinstaller (in French CREATOR OWNER) were missing two permissions. I checked both boxes, but here I ran into a problem: when I clicked 'Apply' controls have disappeared. Can someone please tell me what is the problem here? And this is the solution to the problem of connectivity together?

  Thus, when the Diagnostic Policy Service is running, it will also open access once more to the internet?

  My computer is a Packard Bell EasyNote BU with MS Windows Vista Home Premium 32 bit Service Pack 2.

  Forum about it queries are a couple of years. This means that the problem has been resolved without my noticing?

  Without computer access to the internet, it is difficult to diagnose and repair the computer to solve the problem.
  It's a last-ditch effort, I would be so grateful if someone comes up with the solution.

  Hello

  Perform the Inplace upgrade.  This will replace all the files corrupted on your computer.
  InPlace upgrade does not remove the files or applications.
  http://support.Microsoft.com/kb/2255099

• How to get the element selected listfield and goto next page?

  Assalaamualikum

  I try parsing the XML from a url and show in listfield.

  problem:

  How to get the selected item and passing the variable and than goto next page?

  my code:

  package parsepack;

  import java.io.IOException;
  import java.io.InputStream;
  import java.util.Vector;

  Import javax.microedition.io.Connector;
  Import javax.microedition.io.StreamConnection;

  Import net.rim.device.api.system.Bitmap;
  Import net.rim.device.api.system.Display;
  Import net.rim.device.api.ui.DrawStyle;
  Import net.rim.device.api.ui.Field;
  Import net.rim.device.api.ui.FieldChangeListener;
  Import net.rim.device.api.ui.Graphics;
  Import net.rim.device.api.ui.Manager;
  Import net.rim.device.api.ui.UiApplication;
  Import net.rim.device.api.ui.component.ListField;
  Import net.rim.device.api.ui.component.ListFieldCallback;
  Import net.rim.device.api.ui.container.MainScreen;
  Import net.rim.device.api.ui.container.VerticalFieldManager;
  Import net.rim.device.api.xml.parsers.DocumentBuilder;
  Import net.rim.device.api.xml.parsers.DocumentBuilderFactory;

  to import org.W3C.DOM.document;
  Import org.w3c.dom.Node;
  Import org.w3c.dom.NodeList;

  extends xmlparsing public class UiApplication implements ListFieldCallback, FieldChangeListener
  {

  Public Shared Sub main (String [] args)
  {
  xmlparsing app = new xmlparsing();
  app.enterEventDispatcher ();
  }

  public long mycolor;
  Connection _connectionthread;
  private static ListField _list;
  private static Vector listElements is new Vector();.
  public display display = new MainScreen();
  MainManager VerticalFieldManager;
  VerticalFieldManager subManager;

  public xmlparsing()
  {
  Super();
  pushScreen (screen);

  final Bitmap Imagearriereplan = Bitmap.getBitmapResource ("blackbackground.png");

  mainManager = new VerticalFieldManager(Manager.NO_VERTICAL_SCROLL |) Manager.NO_VERTICAL_SCROLLBAR)
  {

  public void paint (Graphics graphics)
  {
  graphics.drawBitmap (0, 0, Display.getWidth (), Display.getHeight (), Imagearriereplan, 0, 0);

  Super.Paint (Graphics);
  }

  };

  subManager = new VerticalFieldManager(Manager.VERTICAL_SCROLL |) Manager.VERTICAL_SCROLLBAR)
  {
  protected void sublayout (int maxWidth, maxHeight int)
  {
  int displayWidth = Display.getWidth ();
  int displayHeight = Display.getHeight ();

  Super.sublayout (displayWidth, displayHeight);
  setExtent (displayWidth, displayHeight);
  }
  };

  Screen.Add (mainManager);

  _list = new ListField()

  {

  public void paint (Graphics graphics)

  {
  graphics.setColor ((int) mycolor);
  Super.Paint (Graphics);

  }

  };
  myColor = 0x00FFFFFF;
  _list. Invalidate();
  _list.setEmptyString ("* only supplies not available *", DrawStyle.HCENTER "");
  _list.setRowHeight (50);
  _list.setCallback (this);
  mainManager.add (subManager);
  listElements.removeAllElements ();
  _connectionthread = New Connection();
  _connectionthread. Start();
  }

  protected boolean navigationClick (int status, int time)
  {
  Try
  {
  Here, go to another screen if you need.

  }
  catch (System.Exception e)
  {
  System.out.println ("Exception:-: navigationClick()" + try ());
  }
  Returns true;
  }

  private class login extends thread
  {
  Public connection()
  {
  Super();
  }

  public void run() {}
  Doc document;
  StreamConnection conn = null;
  InputStream is = null;
  try {}

  Conn = Connector.open (StreamConnection) ("http://ec2-54-248-241-248.ap-northeast-1.compute.amazonaws.com/koperasi-akr-trial/cgi-bin/gw-pinjama...

  DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance ();
  docBuilderFactory.setIgnoringElementContentWhitespace (true);
  docBuilderFactory.setCoalescing (true);
  DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder ();
  docBuilder.isValidating ();
  is = conn.openInputStream ();
  doc = docBuilder.parse (is);
  doc.getDocumentElement () .normalize ();
  List of NodeList = doc.getElementsByTagName ("ID");
  for (int i = 0; i)< list.getlength();="" i++)="">
  Node node = list.item (i) .getFirstChild ();
  listElements.addElement (textNode.getNodeValue ());
  }
  } catch (Exception e) {}
  System.out.println (try ());
  } {Finally
  If (is! = null) {}
  try {is.close ();
  } catch (IOException ignored) {}
  } If (conn! = null) {}
  Try {conn.close () ;}
  catch (IOException ignored) {}
  }} UiApplication.getUiApplication () .invokeLater (new Runnable() {}
  public void run() {}
  _list. SetSize (listElements.Size ());
  subManager.add (_list);
  Screen.Invalidate ();
  }
  });
  }

  }

  ' public void drawListRow (list ListField, Graphics g, int index, int y, int w)
  {
  Your string = (String) listElements.elementAt (index);
  int yPos = 0 + y;
  g.drawLine (0, yPos, w, yPos);
  g.drawText (, 5, 15 + y, 0, w);
  }

  public {get {Object (ListField list, int index)
  {
  Return listElements.elementAt (index);
  }
  public int indexOfList (String prefix, ListField list, int, string)
  {
  Return listElements.indexOf (prefix, string);
  }
  public int getPreferredWidth (ListField list)
  {
  Return Display.getWidth ();
  }
  public final void insert (String toInsert, int index) {}
  listElements.addElement (toInsert);
  }

  ' Public Sub fieldChanged (field field, int context) {}

  }
  }

  Thank you.

  I told you that replace the navigationclick() method where initialize you your listfield

  as I think that changing your code and then answer me

  _list = new ListField()
  {
  protected boolean navigationClick(int status, int time)
  {
    Dialog.inform("hi");
    return true;
  }
  
  public void paint(Graphics graphics)
  {
  graphics.setColor((int) mycolor);
  super.paint(graphics);
  }
  };
  

• Import the folios of the DPS for AEM

  The isn´t selector activate for import folios of the DPS for MEA. How do I?

  

  Hi Rita,.

  You will need to create a project in AEMM, and then use the Folio migration tool to migrate the folios (from classic DPS) to this new project.

  All folios migrated will be converted in the articles and ready to be used on AEMM.

  More details here:

  Migrate the content of folios DPS to MEA Mobile

  Thank you

  Andrei