DPS - how to add an intro to the app page

Similar Questions

• How to add photo/video to the title page

  EP 7

  My sky I feel overwhlemed.

  I am trying to create a video birthday for my daughter.  I want to use the title for birthday

  If I go to the titles in the Section of the task, and then selected 'Happy Birthday' in the first list drop-down and then "Birthday Party" in the second set.  I want to use the 4 item that is labeled "Title" it's a black spot where you can add a picture I guess, but how can I add the still photo or video in this black spot?

  Thank you

  Nik

  Here is an example of the anniversary of title on a still image. It's the timeline in PE4, but PE7 should be almost identical, depending on how you have your willing panels:

  

  Hope that this helps explain the use and placement of the assets on the VT in the timeline panel.

  Good luck

  Hunt

• I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  To do that you will need to change the varibles PID values and then use the sliders to add numbers to a latch for variables that point.

  This is how I think it works in Version 8.

  In all cases, you should move on to 12 more stable summer.

  In addition, unless that is a very slow process, I generally do not like closed loop PID with DASYLab due to the fact that computers is not reliable with timing.

• How to add more application under the new tab shortcuts when we right click on the desktop.

  How to add more application under the new tab shortcuts when we right click on the desktop.

  Hello

  I suggest you to post your questions in the forums 'Development of the User Interface for Windows Desktop' for better assistance.

  Here is the link: http://social.msdn.microsoft.com/Forums/en-US/windowsuidevelopment/threads

• How to add a shortcut in the taskbar next to the Start Menu?

  I would like to know how to add a shortcut in the taskbar next to the Start Menu (a place with a small shortcut icon).

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  Hello

  Have a look here: http://www.sevenforums.com/tutorials/397-taskbar-pin-unpin-program.html

  When you scroll down on this page, you will find a lot more "pin to taskbar" - tutorials.

  Take a look at this little program free of practical assistance, too: http://winaero.com/comment.php?comment.news.108 of the taskbar Pinner

  I hope this helps.

• How to add multiple lines when the button is clicked

  How to add multiple lines when the click on button now is just add a row .plz give me idea how... waiting for answer

  / public final class screen extends MyScreen
  {
  /**
  * Creates a new object of MyScreen
  */
  ObjectChoiceField obj1 obj2, obj3, obj4.
  Table of String() = {'101 ', ' 102'};
  String of shadow [] = {"Shade1", "Shade2"};
  Rolls of string [] = {'101 ', ' 102'};
  String cutting [] = {"100-150", "150-200"};
  Chain of selectedindex1, selectedindex2, selectedindex3, selectedindex4;
  LabelField lbl1 lbl2, lbl3, lbl4;
      
  GFM LinedGridFieldManager;
  HFM HorizontalFieldManager, hfm1, hfm2 hfm3;
  VerticalFieldManager vfmMain;
      
  public MyScreen()
  {
      
  Set the displayed title of the screen
  hfm1 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm2 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm3 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  HFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_RIGHT);
  vfmMain = new VerticalFieldManager (Manager.NO_VERTICAL_SCROLL |) Manager.NO_HORIZONTAL_SCROLLBAR);
          
  obj1 = new ObjectChoiceField ("", graph, 0, FIELD_LEFT);
  obj2 = new ObjectChoiceField ("", blind, 0, FIELD_LEFT);
  Obj3 = new ObjectChoiceField ("", rolls, 0, FIELD_LEFT);
  Obj4 = new ObjectChoiceField ("", cuts, 0, FIELD_LEFT);
          
  LBL1 = new LabelField("");
  LBL2 = new LabelField("");
  lbl3 = new LabelField("");
  lbl4 = new LabelField("");
          
  ButtonField btnAdd = new ButtonField ("ADD", FIELD_RIGHT);
          
  GFM = new LinedGridFieldManager (4, LinedGridFieldManager.VERTICAL_SCROLL);
          
  hfm1.setMargin (20, 0, 10, 0);
  hfm1. Add (new LabelField ("Chart"));
  hfm1. Add (obj1);
  hfm1. Add (new LabelField ("Shade"));
  hfm1. Add (obj2);
          
  hfm2. Add (new LabelField ("Rolls"));
  hfm2. Add (Obj3);
  hfm2. Add (new LabelField ("Cuts"));
  hfm2. Add (Obj4);
  HFM. Add (btnAdd);
          
  GFM. Add (new LabelField ("Chart"));
  GFM. Add (new LabelField ("Shade"));
  GFM. Add (new LabelField ("Rolls"));
  GFM. Add (new LabelField ("Cuts"));
          
  vfmMain.add (hfm1);
  vfmMain.add (hfm2);
  vfmMain.add (hfm3);
  vfmMain.add (hfm);
  vfmMain.add (new SeparatorField());
  vfmMain.add (gfm);
  Add (vfmMain);
          
  btnAdd.setChangeListener (new FieldChangeListener()
  {
  ' Public Sub fieldChanged (field field, int context) {}
  TODO self-generating method stub
  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];
                  
  While (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }
  }
  });
  }
  }

  Hi Piya,

  I run your code, and according to your logic that it works correctly.

  It's adding that line only once because according to your logic that one line can be added to MDT, if you do not want to add line on each click on the button, follow these steps:

  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];

  Lbl1 LabelField = new LabelField("");
  Lbl2 LabelField = new LabelField("");
  LabelField lbl3 = new LabelField("");
  LabelField lbl4 = new LabelField("");
  If (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }

• How to add an icon on the homepage of BB

  Hello

  I want to add an icon on the home page (similar to the missed call icon) to see whether or not my application is running in the background.

  Any suggestion on how to achieve this.

  TIA

  Shiv

  see the ApplicationIndicator class. available since 4.6

• How to add 2 points on the Noel e? I don't have a 2nd series of digits to the right of the keyboard.

  How to add 2 points on the letter e in the Noel case?  I don't have the 2nd series of digits to the right of the keyboard. Windows 8

  Wednesday, April 23, 2014 23:25:53 + 0000, RobertNortonWZ wrote:

  How to add 2 points on the letter e in the Noel case?  I don't have the 2nd series of digits to the right of the keyboard. Windows 8

  You mean you want the e character? These two points are called a
  umlaut. You do not add points; the e with points is another
  a simple e character. There are several ways to get this
  character, but a simple is to hold the ALT key and type 137.

  As a point of information if you are interested, the subject of a
  umlaut is to indicate that the second of the two successive vowels is
  pronounced separately. So the word 'book' is pronounced buk, but the
  Book name is pronounced BO - ock.

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• How to add a tail to the end of a text in photoshop?

  How to add a tail to the end of a text in photoshop?

  I tested the police (from dafont.com) in the real Photoshop on a Windows 7/32 bit computer.

  It is all ok.

  Fenja

  

• How to add an outline to the text?

  How to add an outline to the text?

  Add a line in the character of the text layer settings.

• How to add two controls on the same form datagrid? I get the error message...

  Hello

  I have to add two controls on the same page datagrid. When I try to drag an another DataGrid in the components window, it says "an element with that name already exists in the library."

  How can I add multiple controls on the same page datagrid?

  Kind regards.

  _data2 = new XML (event.target.data2);

  should be

  _data2 = new XML (event.target.data);

  (actually, it's better if it was

  _data2 = XML (event.target.data);

• How to add a space between the currency symbol and price?

  Hello

  Can you please guide me how to add a space between the currency symbol and price?

  Support told me this question in the forums because it is done with JavaScript and it is not covered in the official documentation.

  Any who have done this? I would like to turn 20 at 13.20 RON RON13 or 32, 90 to 32,90 USD.

  Thank you!

  Hello.

  I test and it works.

  If any who need it, this is how I did it.

  I changed the models of Modules-> page layouts of the shop online-> overall layout.

  I added at the end of the HTML code, the code following JS:

  The result can be seen here: http://magazindepiese.worldsecuresystems.com/accesorii/chimice?Page=1&Items=12

  Instead of PRICE: RON22, 62, now it's READY: 22,62 RON that is correct for the Romania.

  Thank you Mario!

• How to add a link to the page complete multi-page PDF.

  Is it possible to add a link to the full page in multi-page PDF. So anywhere, I click on the page, it will take me to a specific hyperlink.

  I know there is a link to feature, but I can not create an action on its behalf and therefore cannot automate to easily update all the pages and many docs with it. I also looked in invisible buttons, then right clicking on it and the replication of all pages. This will be my last resort if there is no other options but its still not easy to do what I have to re-create the link for each document layer and must reproduce all individually on a page-by-page. Even if not for several files, it would always be very happy to be able to clone an element to link to all pages in a document.

  Else I've tried creating a layer in InDesign with a link and then using the Action to import layers, but that also doesn't seem to work.

  Any ideas?

  Thank you!

  You can use the Javascript method addLink the doc object.

• How can I remove updates in the App Store I want?

  How can I remove updates in the App Store I want? that is no longer use app, but I'm getting updates listed.

  Delete all copies of the application from the main HARD drive and all external drives or mounted partitions which can have the app.

  By the end of 2012 mini Mac, OS X El Capitan 10.11.4. Apple Watch, 38 mm silver AL, Watch OS 2.2; iPad 2 Air & iPhone 6 + iOS 9.3