Drivers SATA for XP (solution on BSOD 0x0000007B)

WARNING:

You use this guide at your own risk. I take no responsibility for any problem.

Important information!

Before anything, please create a set of recovery disks.

Resources:

With the help of HP Backup and Recovery Manager in Vista

Creation of recovery disks or saving a recovery Image on a USB drive (Windows 7)

All pre-installed drivers and software by HP are in the folder in C:\swsetup . If you still have it on the HARD drive and then burn this file on CD/DVD. You may need them one day.

If you don't now any system on your laptop / netbook then go two steps above.

Links to the SATA drivers are included in the files pdf and doc of this guide.

Table of contents:

A how to check what SATA driver you need.

B the drivers SATA Intel.

C the Nvidia SATA drivers.

AMD SATA drivers D .

Ad has.

Install CPU-Z in your current system. You can download this program here.

Screenshot below shows where you will find links to this software on the home page of CPU-Z .

Now launch CPU-Z and select the tab ' motherboard '.

You will find information here two important on your chipset:

  • brand (in the above examples: Intel)

and

  • type (in the above examples: PM965 and HM55).

If your computer laptop chipset is made by:

  • Intel

Go to point B and do everything that is written here.

  • NVIDIA

Go to point C and do everything that is written here.

  • AMD

Go to point D and do all that is written here.

Tags: Notebooks

Similar Questions

  • Drivers SATA for Equium L40

    I've been reading for hours in order to change from Vista to XP, everyone gives the link to the support of the pilots in this site, but trying to find drivers for my Equium L40 PSL49E SATA, I do not see these drivers in the list, am I missing something? they are under a different name? can you help me please?

    Thank you

    J

    The SATA drivers are placed on the European driver Toshiba page.
    You will find the PSL49E Equium and drivers SATA for Win XP.

    The drivers are placed in the Intel Storage Manager package, you will find in the AHCI HDD drivers folder!

  • Dual boot win7 and XP pro on Pavilion dv7-3079wm (need drivers SATA for XP)

    my machine features:

    model: dv7-3079wm

    Product number: VM241UA #ABA

    product name: pavilion dv7

    hardware ID: PCI\VEN_1002 & DEV_4391 & SUBSYS_363A103C & REV_00

    PCI\VEN_1002 & DEV_4391 & SUBSYS_363A103C

    Pocessor AMD Turion II Dual-Core Mobile Ultra M600 2.4 GHz

    S.O.  Win7 64

    the information of the motherboard:

    model: 363 a 33,23

    Chipset: AMD ID9601 rev 0.0

    Southbridge: ATI ID439D

    and I tried to integrate all the drivers THAT SATA proposed in the forum, as
    General XP Downgrade Guide for HP laptops

    but I do not go on the blue screen.

    I need to install xp in order to use a program from my work (simatic PCs 7)

    Thank you

    If you had installed the sata driver provided, model you will need an additional step to work around the error ACPI by pressing F7 seeing (press F6 if you need to install a third-party RAID or SCSI driver displayed).

  • Need drivers SATA for Satallite A215-7425

    Hello.
    I want to install XP. But I can't find SATA drivers for my chipset (AMD M690).
    If anyone knows where they are, please help me.

    This laptop seems to be designed for the American market, and therefore to the United States from Toshiba should be responsible for the crash.

    I recommend checking out the Toshiba driver page we:

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

    Good bye

  • Drivers SATA for Win XP for my Satellite C660D-1GJ

    I am looking for Win XP SATA drivers for my Satellite C660D-1GJ, can someone help me?

    There is no compatibility mode in the BIOS that is why I need these drivers.

    Post edited by: scribler

    Hello

    You will find on the page of the Toshiba EU pilot the AHCI driver packs for Win 7 32 bit / 64 bit and win 8. There is no driver for the chipset AMD in Win XP.

    It seems that AMD does not Win XP AHCI/RAID/SATA drivers for this chipset.

    However, download the version of Win 7.
    Unzip the package. Now, you'll see an exe file. It's a package too.
    Right-click on the exe (TC40115700D) and extract the package.

    Now, go to:
    TC40115700D-packages-> drivers >-> SBDrv->-> AHCI SB7xx
    There you will find the files amd_sata/driver

    But again: not quite sure if Win XP would be able to manage it.

  • Satellite L500D - cannot find drivers SATA for Windows XP

    I have this one: Satellite L500D (PSLT9E) - I is not sure that the last brackets are really important - it's local Russian model.

    So I want to install Win XP and there's a rumor that XP do not have SATA driver for it. I want to integrate the drivers of XP installation CD, but I don't have any idea where I should find the drivers. I couldn't find them on this site (or worm rus of the site)...

    PS / / please, help me to solve my problem. Thank you!

    Hey Buddy,

    The SATA driver belongs to a display driver. Therefore, download the display driver and extract the files. The driver files that you need you can find in the SBDrv\SATA directory

    You can use these files to create your own installation with these drivers disc using nLite, but make sure the XP disc contains at least SP2 or SP3 better.

  • Cannot find drivers SATA for Win XP on Satellite L300-1 has 3

    Hello

    I bought a new laptop Toshiba Satellite L300 1 to 3, but I have a problem...
    I can't find the drivers for SATA.

    My system it works now on the compatibility mode and the system load slow (XP sp2).
    The Toshiba driver does not work, it says that the system is not having the minimum requirments or something like that...

    so, please if you can help me

    THX

    Please take a look here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39465

    And please read the threads that are already posted in the forum!
    It of really NOT necessary to view 1000 questions on the same topic!

  • Drivers SATA for DV6119US

    I have a DV6119US Windows XP Media Center Edition with the processor AMD Turion 1.6. I need to reinstall windows xp and when I have problems with the recovery discs I intend to use an installation disc valid with slipstreamed with nLite SATA drivers. I went to the support page and the only entry I see for my model that can contain drivers is "nVidia nForce chipset and network controller". This is the file that contains the drivers for XP SATA? If this isn't the case, should which file I use? Thank you.

    Hello

    You don't need to integrate the Sata drivers for your model. You have a Nvidia chipset and models with it not need this kind of driver.

    Just make sure that you use at least version of WinXP SP2 . If you have not got the version SP2 here you can download this service pack and here you have a guide to how to integrate this file with XP.

    In nLite, you can even burn your new XP CD with these changes.

  • Need drivers SATA for Satellite A100 (PSAA3E)

    I'm hoping that someone ca help me.

    I'm doing a new installation of vista 32-bit, but the computer does not display my hardrive. I've been to the site of intel and tried to install a good pilot "storage manager", which relates to the chip, which I think is an express 945gm... the computer is not recognizing any drivers. I went to the download area of toshiba it seems to have all the drivers except those who will help me to install my drives hard sata.

    I'm really frustrated, but do not want to give up. I want to just vista recognize the drive hard when I do a new installation.

    Please help any help will be highly appreciated

    Man, it's really weird. Windows Vista doesn´t need the SATA drivers since they are already integrated into the installation disc.

    I mean are you really sure, you´re using a Windows Vista installation disc? Moreover, since the doesn´t of disc Vista need all sata, Toshiba doesn´t drivers offer all SATA drivers on their driver download page.

    Double check everything and make sure that you have you´re through a genuine Vista installation disc.
    May I ask what operating system shipped with your machine? XP or Vista?

    Greetings and good weekend

  • Drivers XP for HP Pavilion dv6215ea

    Hi all!

    I need drivers for HP Pavilion dv6215ea xp.

    On the page (http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=it&dlc=it&cc=it&product=3366705&lang=it) xp driver is not something useful.

    On vista (http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=it&dlc=it&cc=it&product=3366705&lang=it) drivers page I can find all sorts of drivers instead.

    Can someone help me find drivers for xp? There is another hp laptop similar to the dv6215ea which has driver xp can I install it on my dv6215ea?

    Thank you

    Hello

    First you have to integrate your drivers Sata (ICH7M) with nLite.

    Here is the guide to how do and here are the drivers Sata for you and here are the Sata drivers from your.  Just unRAR it drivers with winrar.

    Remember, also, that you use the Windows XP SP2 version. If you do not go version SP2 here you can download this service pack

    and here you guide how to integrate this file with your new system of nLite.

    In this program, you can even burn your new XP cd with this driver.

    Drivers for your model:

    Chipset here (first install it and reboot)

    Intel Matrix Storage Manager here

    Nvidia 7400 graphics here

    Wireless Intel 3945 ABG here

    MS - UAA (required a reboot prior to Conexant Audio() here

    Conexant SmartAudio 221 here

    How to install:

    Relax in a folder.run installation program.

    If it errors use Device Manager.
    In Device Manager, right click "Audio Device on HD", choose Update driver,
    Not to connect, install from a list or specific location,

    Select don't search, I will choose the driver to install.
    For the hardware Type select 'show all devices '.
    Remove control "Show compatible hardware" and click on 'disk '.
    Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
    Ignore XP when it complains.
    Reset.

    Conexant HDAUDIO Soft Data Fax Modem with SmartCP Driver here

    .NET framework (required before HP Quick Launch Buttons) here

    HP Quick Launch buttons here

    Ricoh 5-in-1 card reader here

    Bluetooth here

    Synaptics Touchpad here

    Message edited by Daniel_Potyrala on 04/27/2009 18:03
  • BIOS and drivers required for CQ45-106AU for OS Windows XP or Free DOS

    Hello, I bought laptop Compaq CQ45-106AU which has Windows Vista Home Basic OS and I am unable to find the BIOS of motherboard, Chipset drivers and all drivers for this perticular computer laptop, I want this downgrade to Windows XP Pro or I want to to Free DOS so if anyone has the solution to this then please send me information as soon as possible. Thanks in advance to all who pass by this message.

    I recommend you stay with VISTA.

    This chip Audio IDT using model and ENE CIR receiver driver XP were hard to find.

    ENE CIR is essential if you have purchased the remote for this model.

    Some of the user CQ45 found they will lose control of BRIGHTNESS setting (Fn + F7 and F8) due to the incompatibility of the QLB software.

    However, if XP is essential for your applications please perform steps below.

    ____

    Your model must sata driver AMD sliptreamed on XP installation CD.

    If you did it right, you'll BSOD error.

    Use Nlite to slipstream sata driver AMD.
    A good guide for driver sata sliptream, here

    Note: Do NOT use this guide sata driver, your sata driver is given below.

    AMD SATA AHCI Controller Pilot, here

    or

    If you want an AMD SATA driver from HP site, here

    extract sp39719 to a folder and use the files in the RAID7xx folder

    Note:

    Select ONLY x 86 AMD SATA AHCI driver

    Download nLite , here

    Make your Vista recovery cd/DVDs if you have not yet discovered it here

    _____

    Try the following drivers,

    Drivers XP for CQ45-106AU

    Install .net Framework before the others, here

    Suite software Catalyst (for your Chipset ATI, HD 3200 Graphics/video and LAN drivers here

    Audio installation is the most difficult part, since the BIOS incompatibility.

    Install MS-SAU first, here

    IDT High-Definition Audio CODEC Pilot,

    a version update of Microsoft Update Catalog here

    or

    or if you want to install HP IDT driver (VISTA), here , some user indicated that it also works with XP

    or try the new version here

    Note:

    Some users CQ40 CQ45 must update their BIOS to fix Audio that disappeared after rebort.

    If you have found your BIOS is lower than F33A, update your BIOS to the latest version here

    High-Definition Audio (HDA) Modem Install drivers, here

    Broadcom Wireless, here

    Realtek RTL8102E Family PCI - E Fast Ethernet NIC, here

    JMB38X card reader Host controller driver, here

    ENE CIR Receiver (your Vista driver), here

    or if it doesn't work try Vista driver checked Intel, here

    HDMI Audio, here

    ALPS Touchpad Pilot, here

    HP Quick Launch buttons, here

    If you have Bluetooth, here

    If you had for 7 unknown devices (buttons drivers), here

    Installation-> right click machine.inf, choose install.

    Good luck

    Message edited by Mariza on 04/01/2009 12:11 AM

  • HP PAVILION G6 - 1326SA Slipstream drivers SATA

    Hello

    I have a laptop HP PAVILION G6-1326SA and I am trying to install Windows XP on it. I really have to!

    I used this guide:

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and/SATA-drivers-for-XP-solution-on-0x000000...

    From what I can see in the Device Manager windows 7 I have an AMD sata controller.

    After you have created a boot with nlite image, I can confirm that the following files have been added to the image:

    \I386\NLDRV\001\AHCIX86.CA_

    \I386\NLDRV\001\AHCIX86. IN2

    \I386\NLDRV\001\AHCIX86. SY_

    However, if I press F6 at the beginning of installation xp, I can't beyond this message:

    'Installation cannot find a drive on your computer to load oem drivers.

    If I continue without loading the drivers I get only a blue screen.

    At the end of this guide, he said:

    "When AMD SATA drivers that are presented in the guide not working for then start you ' new message ' on our forum to ask for other Sata drivers."

    So can you please help me? I'm doing something wrong or do I need other drivers?

    Thank you!

    There must be an answer.

    I got one for you.

    You have to try different drivers.

    I prefer the method F6 to install using a USB FDD when I install the Intel AHCI drivers and put drivers on a floppy disk.

    Try to extract this file, wake them drivers and see if you have any success.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5098225&prodNameId=5098226&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-95647-1

    You need match the hardware ID on controller AMD SATA to your laptop to a driver file which includes the same hardware ID.

    I would also add that HP has no obligation whatsoever to support any other operating system on one consumer PC other than what he has delivered with.

    Accordingly, those who wish to deviate from the operating system supported, are legitimately on their own to do, but cannot and should not expect any support from the manufacturer.

    If it was so important for you to have XP on your PC, then you should have bought a professional HP laptop where it is has supported for older operating systems.

    Don't you think that any other PC manufacturer offers support for XP on their consumption of current model of PC?

    If you do, think again.

  • The laptop recovery Toshiba Satellite L505-S5997 problem error: Windows cannot verify the digital signature for the drivers required for this device

    I have a Toshiba Satellite L505-S5997 computer laptop and my hardrive recently crushed, impossible to restart.  I installed a SEAGATE 500 GB/sata/GO 16 MB of Cache, 7200 RPM hard drive. I ordered recovery for the computer disks and many of the drivers will not update or install without error that tells me that "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) "error.  Also, when I try to update Windows 7 I get the ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "When I try to download the service pack from the Web site it is usually interrupted with another error.  I tried to go to the Toshiba website and download the drivers needed and utitilities but nothing seems to work.  I am at a loss to try to seek and find a solution.

    Are you sure that the original problem was caused by a failure of the HD, did you test that the hd with the utility bootable disk from audit?

    As if you reinstalled to a new HD using that the required all defined recovery Tosh disk drivers would have been installed in this process.

    Assuming that Tosh then rebooted successfully after recovery, windows update would have run some important updates automatically. If that failed then it would seem that something is happening with your system.

  • Pavilion 15-K5C19PA #ABG: cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-p102tu

    Cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-p102tu

    [my laptop is not install my window 8.1 nvidia driver 64 bit my new purchase Moose please help me hp] team?

    Hi @mnshahid,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15-p102tu and problems with NVIDIA drivers. Your system uses only the Intel driver high definition (HD). Here is the download if you needsp68117.exe. I uninstall Nvidia and reboot the laptop.

    Please let me know how it goes.

    You can say thanks for trying to help by clicking on the Thumbs Up below! .

    Thank you.

  • Driver XP SATA for Satellite Pro L300 PSLB9E

    Hi all I have a Toshiba Satellite Pro L300 PSLB9E and I am trying to downgrade from Vista to XP. I have the sata AHCI controller mode, I looked for this drivers on the toshiba site and the site of intel, but none of these work when installing xp and pressing f6 when you use a usb floppy drive. Any ideas?

    Hello

    If you have set the compatible SATA mode in the BIOS, then you n t need to install all the drivers SATA!
    Compatibility mode allows you to run the HARD drive without SATA drivers.

    But if you want to use the HDD in SATA mode, then you will set back to AHCI.
    In this case the SATA drivers must be installed in order to use the HDD in SATA mode.

    The laptop seems to be equipped with the AMD CPU and so you need a SATA chipset AMD driver. That are in the package of graphics (record SBDrv/SATA") driver

    Welcome them

Maybe you are looking for

  • 7.13 Skype crashes when I open it!

    Please, help me. My Skype crashes when I open it. It falls a GUI where it says, that my Skype has stopped working. I tried to reinstall my Skype, restart the computer, even reinstalling my drivers, still does not properly. And it's true, I tried to u

  • slope of the mobile medium multipass filter

    Hey guys,. Here is a picture of the frequency response of a moving average filter multipass. The number of steps tells you how often the data is passed through the filter. As I am interested in the behaviour of different slope of the different stages

  • nc6000 black screen

    Hi all I have a compaq nc6000 which has a black screen, it works perfectly using an external monitor that pointed me to the screen inverter, so I changed it and hey presto it worked perfectly for 10 minutes together and now back to the black screen,

  • LaserJet 4240n will not print landscape or 14 or 16.67 CPI

    I have 2 printers LaserJet on a RHEL 6.1 System.   One is a LaserJet 2430n and it prints in landscape and 14 or 16.67 CPI... The LaserJet 4240n printer does not print in landscape or 14 or 16.67 CPI.  He seems to forget how do the following. The syst

  • How to dynamically update the Position of the cursor?

    I have this Slider element: Sometimes I need to change the value for the user when they enter its screen. The way I do it is as follows: document.getElementById("slider").value = sliderValue; However, the cursor remains on the value 250. Although if