Duplicate option data address for the second plaintiff with a checkbox

Similar Questions

• Changing the settings of data control for the Web Service with the company Manager

  We have different environments for the development, test, acceptance and Production. In the environment, we use different instances of the BSSV server so we have several points of endpoints for Web Services. When we move at the request of the ADF from one environment to another, we do not want to change the source code, but we want to change endpoints using configuration. We have seen that store them in Enterprise Manager, we can change endpoints and that this configuration will be saved in a MDS. But what precisely needs to be configured on the application to get this working? Now, we can change endpoints, but they are not saved.
  
  I found the information in this blog but it doesn´t work: http://blogs.oracle.com/adf/2011/02/changing_endpoint_url_for_a_web_service_data_control.html
  
  Joost

  Hello

  If you want to configure deployment position of connections, it is necessary for your application to be configured with a Repository.As of MDS in writing I'd mentioned in the blog too, for that you need an entry in the adf - config.xml and that your server must have a registered MDS store. Unless you are going to do this, the connection endpoint changes you make will not be saved.
  For example, at the end of the application, adf-config.xml file, you need an entry like this:
  .
  
  
  
  
  
  
  
  
  
  
  .
  When you deploy this application a server with a registered MDS, the deployment repository will bring up a dialog box where you can set(select/create) a partition for this app in the mds repository. Once your deployment is done, now if you change the endpoint using EM, it will save your changes.

  Vishal-

• Download lightroom 6 (for the second time) with the serial number?

  Hello, I bought adobe lightroom 6 last year and used with my iMac.
  Today, I've updated my old macbook to el capitan and now want to use it on the macbook, too. I have the order number and the serial number of my lr Bill.
  is it possible to download with these numbers on my macbook? I don't use lr on it before.
  Thanks for your help, linda

  Hi Lindab17346767,

  With your license Adobe Lightroom 6 you get two activation, therefore, you can use the same serial number to activate 6 Lightroom on this machine as well.

  Click here to download & Install Photoshop Lightroom

  See also, How to download, install and activate Adobe applications

  Let us know if that helps.

• Thunderbird displays only the text in the messages received or sent, even if the options are set for the HTML pages.

  Using Thunderbird 25.6.0, running on W7 - 64-bit.
  Have used the T-bird constantly since it was morph'ed from Netscape Communicator, so feel I understand basis, including the specification HTML or text/HTML options.

  A user Windows, Thunderbird account works perfectly, for the second user of Windows, all Thunderbird email accounts (4-a profile of T-bird) suddenly transformed to send and receive all messages in text only.

  I regularly compose messages in HTML format, using the wide range of fonts, colors, embedded graphics. The compositions remain intact (HTML) until the moment where I send them. The copy in my "sent" folder is in the text; one of the graphics incorporated in my original will be attached, and all the others will be gone. If my recipient respond or forward the message to me, all of my original material is text, as well as all my recipient adds to his response.

  In addition, all original incoming messages of my correspondents are in simple text. Not a sign of HTML anywhere unless I have to compose a message, or a message saved in my drafts folder.

  What is the problem and how can I solve this problem?

  Dean Jones

  NO, I ask a question. I was NOT choosing my question as a solution to my question.

  Usually, when I start new topics, I am taken in part because it's something twice 6 months ago.

  I have no solution. I have a problem. I'll start a new topic

• HP Workspace: What plan options are available for the HP workspace?

  Hey everybody,

  Plan options are available for the HP workspace?

  Thank you

  Bill

  HP workspace is a service of application with the application testing virtualization and delivery provided trained HP Workspace Service Desk officers lighten the load for a client by THIS group. HP workspace is available in two service options - essential and Premium.

  Essential is a great solution for organizations that have the most mobile that need to be in "desktop mode" using Windows or the Web for business applications of less than a few hours a day. Premium provides additional virtualized applications, more cloud computing power and overtime for the users who need to use applications in desktop mode more frequently. With each service, there is an integration of VPN service option (sold separately). The VPN service allows a secure access to data and databases behind the corporate firewall.

  Plan options HP workspace at a glance:

  	Essential	Premium	The Service module
  Monthly usage (per user)	40 hours	80 hours	integration of VPN 1 year
  Cloud (per user), the processing power	VCPU dedicated	VCPU dedicated	Licensure is through gateway VPN - no per user
  RAM to the virtual machine (per user)	4 GB OF RAM	8 GB RAM
  Virtualized applications	≤10	Unlimited
  The application analytics	—	Detailed usage reports
  Support	Incident and Monday to Friday deployment support[1]	Mon - Fri deployment and incident support.7

• Office Jet 8610: Device appearing is not in the device tab connected hp after entering the claim code (for the second time)

  I got the claim code to register my hp device connected for the second time and on both occasions, it doesn't have to be displayed in the devices tab.

  I tried a disconnection and logging into my account, but this has not solved the problem.

  I tried the two Chrome Version 39.0.2171.95 (64-bit) and Firefox 31.0 on a MacBook Pro running Mac OS 10.9

  Printer is an Office Jet 8610

  Web services are enabled and the printer is connected to the network.  I created the computer print jobs and they have successfully completed.

  * beep *?

  The problem disappeared after I checked my email address

• I sent 2 SMS to the iPhone even from the same location 1 hour out. Why I was charged for the second message, but not the first?

  I sent 2 SMS on the phone even in the same place 1 hour apart. I was charged for the second message, but not the first. Why charge me? I was under the impression that the messages sent between iPhones are free?

  I was under the impression that the messages sent between iPhones are free?

  It's a little more complicated than that.

  If the message is sent as an iMessage (blue) uses the data that could be part of your cellular data allowance or WiFi depending on what you are connected to. If it is sent as SMS (green) it takes however your carrier charges you for SMS.

  For a message to be sent in an iMessage, both parties need to have a device capable of iMessage (e.g., iPhone, iPad, Mac), iMessages allowed to have (settings > Messages > iMessage > on) and be connected to the data (Wifi or cellular).

• HP dv5 first recovery disc loaded, but never asked for the second

  HP Pavilion dv5t-1000, p/n KQ574AV Windows Vista 32-bit, I have a set of recovery disks that I made before I started using the machine.

  Yesterday, my laptop froze during the download of reader photos.  System rebooted to a black screen with cursor flashing at the top left.  Removed the battery & power cord; power button down for 15 seconds; restarted the computer to another black screen.  Repeated several times.

  A disk failure hard while slot guaranteed 2 years, including fixed hp.  On the keyboard Panel, the three before white lights: power light, lightening bolt not away and hard drive/array turned on & strong flashing.

  The recovering of the disks and rebooted the computer.  "Windows is loading files...". ' First disc ends, but computer never asks for the second recovery disk.  Screen changes from black to blue.

  New message: PC it is not supported by the system recovery discs.

  You will not be able to continue to recover this system with disks.

  Can someone help me please!

  Hello

  Ok.

  If you get a disc error, then it would seem more likely to be a hard drive failure.

  View the results you get on the test drive.  If your drive is failed then try to restore or recover simply will not work. A replacement hard drive will be necessary.

  You may be able to recover your data on the disk by putting it in an external enclosure and connect to another Windows PC.

• Help with static IP address for the WRT54GL by EZXS55W

  Hi all!

  I'm having some trouble network at the office and cannot keep close internet for all the world just try a new mode of connection of the cables.

  We recently received a notice on five new static ip addresses for the office, we did turn on DHCP those for a year now.

  We have a basic network requiring no credentials of the modem or connection.

  At this moment we have a network cable straight from the network on the router (WRT54GL) failure. Then, the router is defined in gateway mode and uses one of our static Ip addresses.

  I wanted to connect my server to the same fault, but using the static IP address, so I thought why not do it through a switch.

  So the network failure, I ran the right network cable into the uplink on the switch (EZXS55W) connector and then put the router in port 1 and my server port2. Both connected with the right cables.

  The Internet light on the router does not light and the switch just flicker light now and then.

  Maybe someone here can help me how I should put up to get to the top and running, what do I have to configure something special on the router or maybe somewhere use twisted cables.

  Please I need your help!

  Thanks for the help and you where once there was something wrong along the way.
  I tested my switch before trying this, but apparently it is now broken.
  I borrowed another switch of a friend and everything was up and running in a few seconds.
  So now I just need to buy a new switch and everything will be fine.
  Once agan, thank you...

• Continually having error 1002. Lease IP address for the NIC refused by the DKCP server.

  * Original title: error 1002

  Continually having error 1002. Lease IP address for the NIC refused by the DKCP server. Have Realtek PCle GBE Family Controller, which is

  does not, but the drivers are up to date. I have Telstra 4 g modem netgear using network Local Area Connection 2 Sierra Wireless WWAN

  Adapter. If I run the commands ipconfig / release or renew all I get is media disconnected. I am able to use Realtek with Telstra.

  Hi Yvonne,

  Thank you for your response.

  I appreciate your time.

  I hope you can get your problem on the TechNet forum as soon as possible.

  Thank you

• What developer support options are available for the development of Java for the BlackBerry Smartphone?

  What developer support options are available for the development of Java for the BlackBerry Smartphone?

  What plans are available?

  Who can I contact with to register a support plan?

  One of the evangelists 'Developer' RIM working outside South Africa, I think, so there should be someone local you can talk too.  If you message Mark Sohm (the RIM name you will see a lot on the forum - MSohm), with your e-mail address and it ask to put you in contact with the Developer Evangelist in SA, which should help.  You can tell Mark to ask me if he needs clarification.  Do not promise anything either but I hope that something will happen.

• srchdata in subforms does not not for the second occurrence

  Hi all

  Probably a very simple answer, but hoping someone can help us

  We have xml in the format below:

  < saList >

  <>adjustment

  < adjList >

  < totAmt > - 50.00 < / totAmt >

  < / adjList >

  < / setting >

  < / saList >

  < saList >

  <>adjustment

  < adjList >

  < totAmt > - 12.00 < / totAmt >

  < / adjList >

  < / setting >

  < / saList >

  I have a subform that is triggered on the adjustment of <>and in the sections which subform that trigger on < adjList >. So, we get two parts with the above XML code.

  In this section, I have a DAL which is changing the value of < totAmt > above, remove the '-' if exists and substituting a "CR" at the end (e.g. 50.00 CR / 12.00 CR).

  The SRCHDATA for this is in the format:

  TPAAMT = SrchData ("!") ("/ xxxxxxxx, saList, adjustment, adjList [* @GETIMAGE *] / totAmt", 1.19)

  The DAL works for the first triggered section, but returns EMPTY for the second triggered section. Any other information is removed from the second incident, but the DAL does not work. Can anyone help?

  Thank you

  Patrick

  As you currently described the data you get two data items by using the xpath expression that you mentioned earlier. However, you will not get a third.

  Assuming that the repetition of node at the top level is not relevant for your situation of subform, you dumb down to the xpath expression to be less precise.

  TPAAMT = SrchData ("!") ("adjList [* @GETIMAGE *] / totAmt", 1.19)

  By doing so, you say you want to find any occurrence descendant of adjList, regardless of his filiation. If you include the line above the relevant node, then it is considered important for research.

• Hello - I have used CC for about 1.5 years, I work on my Mac fixed in my office and also on my Mac Powerbook. For the second time, I can't work on the Powerbook - I can´t reach my documents - nothing happens if I have the latest version on both

  Hello - I have used CC for about 1.5 years, I work on my Mac fixed in my office and also on my Mac Powerbook. For the second time, I can't work on the Powerbook - I can´t reach my documents - nothing happens if I have the latest version on both computers. What's not?

  Hello

  Please help us to better understand.

  What message did you while accessing your documents?

  Do you have a white screen on the creative cloud App:

  You can refer -:new Creative Cloud application unusable: it is empty!

  and also try:-screen black at sign - in | Creative Office Cloud app

  Wheel rotation under apps:

  Please check the help below document:

  Does not open App | Wheels of progress turn continuously

  You can also view the nets below where this issue has been addressed:

  Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

  Creative Cloud Desktop App taped blue spinning wheel after update.

  For messages from the server:

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Creative cloud will not - can not get on the servers, perhaps because the firewall blocks

  Hope this helps!

• IP address for the IP number.

  Dear Sirs, yesterday I ask questions and some people confuse. Today, I hope that person do not confuse. We have table in the Oracle software with many of the IP address. We also hold data like the number of IP (is easeier to sort data and such. So, we'd like to get the code to convert the IP address to the IP (www.xxx.yyy.zzz to the integer) number. If anyone has such a code, can they please give me kind gentlemen.

  Rajiv Singh says:
  Dear Sirs, yesterday I ask questions and some people confuse. Today
  I hope do not confuse anyone. We have table in the Oracle software with
  many of the IP address. We hold data such as the number of IP (is also
  easeier to sort data and such. If we get the
  code to convert the IP address for the IP number (www.xxx.yyy.zzz to)
  the integer). If anyone has such a code, can they please give me kind gentlemen.

  Hi again Rajiv,

  As for yesterday, we did a job on this
  and I think for the same reasons as you - that is
  Reverse lookup of country from IP address
  appearing in weblogs.

  This code does more than you may want to
  too ;) (@ end of post)!

  Generates the code generation of a guided table
  addreeses random IP by 1000. Then the four
  components are separated (pos1... (4) then
  in IP_NUMS, the actual number is calculated.

  We have then to sort and convert back to IP address
  (we have been testing the performance of sorting)
  and similar)

  HTH,

  Paul...

  /*
  
  CREATE TABLE IP_TEST AS
  SELECT TRUNC(DBMS_RANDOM.VALUE(0,255)) ||'.'||
  TRUNC(DBMS_RANDOM.VALUE(0,255)) ||'.'||
  TRUNC(DBMS_RANDOM.VALUE(0,255)) ||'.'||
  TRUNC(DBMS_RANDOM.VALUE(0,255)) AS IPADDR
  FROM DUAL
  CONNECT BY LEVEL <= 1000;
  
  */
  
  WITH IP_ADDYS AS
  
  (
  
  --  SELECT '75.158.2.101' AS IPADDR FROM DUAL
  
  --  UNION ALL
  
  --  SELECT '100.101.102.103' FROM DUAL
  
  --  UNION ALL
  
  --  SELECT '255.255.255.255' FROM DUAL
  
    SELECT IPADDR FROM IP_TEST
  
  ),
  
  IP_POS AS
  
  (
  
  SELECT TO_NUMBER(SUBSTR(IPADDR, 0, 
  
                   INSTR( IPADDR, '.', 1, 1) -1)) as pos1,
  
  TO_NUMBER(SUBSTR(IPADDR, INSTR(IPADDR, '.', 1, 1) + 1, 
  
            INSTR(IPADDR,'.',1,2)-INSTR(IPADDR,'.',1,1)-1)) as pos2,
  
  TO_NUMBER(SUBSTR(IPADDR,INSTR(IPADDR,'.',1,2)+1,
  
            INSTR(IPADDR,'.',1,3)-INSTR(IPADDR,'.',1,2)-1)) as pos3,
  
  TO_NUMBER(SUBSTR(IPADDR,INSTR(IPADDR,'.',1,3)+1)) as pos4 from IP_ADDYS
  
  ),
  
  IP_NUMS AS
  
  (
  
  select 16777216 * pos1 + 65536 * pos2 + 256 * pos3 + pos4 IP_Number from ip_pos
  
  order by IP_Number
  
  )
  
  select to_char(trunc(IP_Number/16777216)) || '.' || 
  
  to_char(trunc(mod(IP_Number/65536, 256))) || '.' ||
  
  to_char(trunc(mod(IP_Number/256, 256)))   || '.' ||
  
  to_char(trunc(mod(IP_Number, 256)))      
  
  IP_Address from IP_NUMS;
  

• For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left. Tried to 'fix this folder' and lost ALL

  For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left.

  Tried to 'fix this folder' and ALL - lost ALL the Inbox.

  The file is still there and works well...

  How can I stop it and what are the causes?

  Thank you all, Gabe

  If you have the file somewhere on your hard drive, export and import tools it will be important back to Thunderbird.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  Instructions http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html