Duplicate SYN dumped by FWSM package

Similar Questions

• DROP PACKAGE

  Hello
  I would like to help.
  I have the following problem:

  Site studies Web has an application that runs on top of JWPlayer plugin (SWF), but the site is by permission of lists all the rules of content filtering with the firewall for full access, and yet this fall packages. The following Packet monitor log.

  Number of packages: 419 *.
  Header values:
  Captured bytes: 131, actual bytes on the wire: 131
  The package info (time: 19/04/2016 10:08:32.624):
  in:-, out: X 0 *, IGNORED, Code Drop: 41, Id of Module: 26, (Ref.Id: _5057_txGsIboemfJqQlu), 2:2)
  Ethernet header
  Ether Type: IP(0x800), CBC is [d0:67:e5:bc:19:43], Dst = [02:17:c5:c1:28:b4]
  IP packet header
  Type of intellectual property: (0 x 6) TCP, Src = [192.168.16.1], Dst = [179.127.4.146]
  TCP packet header
  TCP Flags = [ACK, PSH,], [54994] = Src, Dst is [1935], Checksum = 0xff0d
  The request header
  Knows not
  Value: [0]
  Hex and ASCII dump of the package:
  0217c5c1 28b4d067 08004500 00753549 00007f06 e5bc1943 *... (.. g... C E... u5I... *.
  {7d7fc0a8 1001b37f 0492d6d2 078f6f86 fd8beb1d 33125018 *}... o... 3.P. *.
  0100ff0d 0000957a 390f7828 be450fb2 330019be 83f630f5 *... z9.x (.) E.. 3... 0 *
  2c2b98c0 8f3155f9 90 d 87738 6ca283d8 2d9779c6 ec81717d *, +... {1U... w8l... there... _ q} *.
  d33347d4 4ff9b8d1 13c4f201 26c244a8 f0979015 6bcd66e1 *.3G. O.......&. D...k. f *.
  (2920ec7d ac727756 bef71e *).}. rwV... *.

  As SCR 192.168.16.1 my internal IP and the DST 179.127.4.146 the IP Address of the request.

  in which I already identified the port and the 1935 and published in this control of the App.

  Note: I use Google Translator to be able to create the text, I apologize for the errors. Thank you.

  

  Problem solved, after placing the IP address in the list of IPS, blocking Exclusions occurred for a reason any within the App advanced control

  Thank you

• no reply SYN/ACK received for most of the SYN packets sent to windows7, 2008, 2012, 8

  I have a small program that sends several TCP packets to a server.

  customer - portA-> server-portB
  customer - portA-> server-portC
  customer - portA-> server-port
  customer - portA-> server-door

  Packets are sent through libnet, in a loop.

  customer - portA - SYN-> server-portB (through Code)
  customer - portA - SYN-> server-portC (by Code)
  customer - portA - SYN-> server-port (by Code)
  customer - portA - SYN-> server-door (by Code)
  If I run the program in windows XP, it works fine, I get SYN/ACK for each package.
  After receiving the SYN/ACK, the nucleus (?, I'm not sure what to do, but not my code) sends an RST for each SYN/ACK received.

  customer - portA< ----syn/ack-----="" server-portb="">
  customer - portA - RST-> server-portB (not my Code)
  customer - portA< ----syn/ack-----="" server-portc="">
  customer - portA - RST-> server-portC (not my Code)
  customer - portA< ----syn/ack-----="" server-portd="">
  customer - portA - RST-> server-port (not my Code)
  customer - portA< ----syn/ack-----="" server-porte="">
  customer - portA - RST-> server-door (and not by my Code)

  However, when I run the program in windows7 (or window2012 or 2008 or windows8), SYN/ACK is received only for the first port, portB.
  And no RST is sent from the client side. In addition, the SYN/ACK is received repeatedly.

  customer - portA - SYN-> server-portB (through Code)
  customer - portA - SYN-> server-portC (by Code)
  customer - portA - SYN-> server-port (by Code)
  customer - portA - SYN-> server-door (by Code)
  customer - portA< ----syn/ack-----="" server-portb="">
  customer - portA< ----syn/ack-----="" server-portb="">
  customer - portA< ----syn/ack-----="" server-portb="">
  customer - portA< ----syn/ack-----="" server-portb="">
  customer - portA< ----syn/ack-----="" server-portb="">
  customer - portA< ----syn/ack-----="">

  I already tried to send RST after SYN/ACK to replicate what happened in XP but still no SYN/ACK is received for ports C to E.
  In addition, after sending the RST for portB, the server continues to send SYN/ACK of portB.

  customer - portA - SYN-> server-portB (through Code)
  customer - portA - SYN-> server-portC (by Code)
  customer - portA - SYN-> server-port (by Code)
  customer - portA - SYN-> server-door (by Code)
  customer - portA< ----syn/ack-----="" server-portb="">
  customer - portA - RST-> server-portB (this time through Code)
  customer - portA< ----syn/ack-----="" server-portb="">
  customer - portA< ----syn/ack-----="" server-portb="">
  customer - portA< ----syn/ack-----="" server-portb="">
  customer - portA< ----syn/ack-----="" server-portb="">
  customer - portA< ----syn/ack-----="">

  Rather than send the RST, I tried also to send ACK, RST/ACK or END/ACK but nothing has worked.

  Can someone help me with this please?
  I need to make my program works for all windows platforms.
  What I want is to receive SYN/ACK for each port (B to E).

  Are there differences in these windows platforms that can affect this TCP behavior?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.msdn.Microsoft.com/Forum
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil

• What is the NT Kernel System? I'm get a popup that says this has changed and want to connect to the internet. Should I be worried?

  The message in the pop up to the following information:

  The executable file has changed since the last time you used C:\Windows\system32\ntoskrnl.exe

  File version: 6.1.7601.17514

  File description: NT kernel & system

  The file path: C:\Windows\system32\ntoskrnl.exe

  Digital signature:

  Process ID: 0 x (hexadecimal) 0 0 (Decimal)

  Origin of the connection: Insider local

  Protocol: UDP

  Local address: 192.168.16.2

  Local port: 138

  Remote name:

  Remote address: 192.168.16.255

  Remote port: 138 (NETBIOS-DGM - NetBIOS over TCP/IP datagram responses navigation)

  Details of Ethernet packets:

  Ethernet II (length of the packet: 223)

  Destination: ff-ff-ff-ff-ff-ff

  Source: 00-23-15-55-9f-c9

  Type: IP (0x0800)

  Internet Protocol

  Version: 4

  The header length: 20 bytes

  Flags:

  .0... = Don't fragment: not defined

  .. 0. = more fragments: not set

  Fragment offset: 0

  Life expectancy: 128

  Protocol: 0 x 11 (UDP - User Datagram Protocol)

  Header checksum: 0xa897 (Correct)

  Source: 192.168.16.2

  Destination: 192.168.16.255

  User Datagram Protocol

  Source port: 35328

  Destination port: 29657600

  Length: 8

  Checksum: 0xd757 (Correct)

  Data (189 bytes)

  Binary dump of the package:

  0000 : FF FF FF FF FF FF 00 23:15 55 9F C9 08 00 45 00 | .......#. U.... E.

  0010: 00 00 22 00 00 80 11 D1: 97 C0 10 02 C0 A8 A8 A8 | ..."............

  0020: 8A 8A 10 FF 00 00 00 COMICS: 57 11 D7 0E A9 F4 C0 A8 | ........ W.......

  0030: 10 02 00 8A 00 00 00 A7: 20 45 4 B 45 45 45 4 4 D | ........ EKEMEME

  0040: 46 45 42 45 44 45 49 43: 4 46 41 45 44 43 41 43 | FEBEDEICNFAEDCAC

  0050: 41 43 41 43 41 43 41 41: 41 00 20 46 48 45 50 46 | ACACACAAA. FHEPF

  0060: 43 45 4 45 48 46 43 45: 50 46 46 46 41 43 41 43 | CELEHFCEPFFFACAC

  0070: 41 43 41 43 41 43 41 43:41 42 4TH FF 00 53 4 42 | ACACACACABN... SMB

  0080: 25 00 00 00 00 00 00 00: 00 00 00 00 00 00 00 00 | %...............

  0090: 00 00 00 00 00 00 00 00: 00 00 00 00 11 00 00 0D | ................

  00 A 0:00 00 00 00 00 00 00 03 00 00 00 00 00 E8 00:00 | ................

  00B 0:00 00 00 00 56 00 03 0D: 00 01 00 01 00 02 00 1E | ..... V..........

  00 C 0: 00 5 C 4 41 49 4 53 4: 54 5 42 52 57 53 4F 4F | .\MAILSLOT\BROWS

  00D 0: 45 00 02 00 4A 4 C 4 45: 41 43 48 50 43 00 2D | E.... JLLEACH-PC.

  Ignore the message as long as you are not facing problems.

  Run SFC scan just in case to repair damaged files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• AO532h e-recovery - backup file not found

  AO532h (Win 7) e-recovery successful (better than ever). One works a program to find the backup files "before recovery?

  This file was new in... C:/backup/public/.../log/channel.ini:

  [PATH OF LOG]
  C:\Users\Public\OEM\Acer VCM\Log
  [UDP ONLY]
  OFF
  [LOG LEVEL]
  DEBUGGING
  [UDP PACKET LOWERBOUND]
  1
  [NORMAL THREAD WAIT TIMES]
  1000
  [EVALUATION PRIOR TO VIDEO VERSION]
  3
  [UDP RECV DISCONNECT DRY]
  30
  [UDP SENDING DISCONNECT DRY]
  20
  [KEEP ALIVE INTERVAL]
  500
  [UDP SYN QUEUE TIME]
  20000
  [PACKAGE SYN]
  50
  [TCP RELAY THRESHOLD]
  1000
  [DYNAMICS OF BANDWIDTH INCOMING INTERVAL]
  20
  [DYNAMICS OF BANDWIDTH OUTGOING INTERVAL]
  50
  [2ND INVITATION TIMEOUT]
  2

  Boots fine. Reconstruction still Windows. May have lost the e-recovery of the backup.  Thanks for the reply. I'll get back to you.

• With the help of the arrow keys (keyboard)

  I want to do my object (character) move up, down, left, right... I wrote the following code, but it seems like its ONLY market not any help please?

  In the Instance name library is: ch1 (this is a clip)

  Class name of scene is: Movment

  Here's the code... What am I doing wrong? Any suggestion or any idea?

  also, I am told compiler error: "duplicate defination function".

  package

  {

  import flash.display.MovieClip;

  import flash.events.KeyboardEvent;

  import flash.events.Event;

  Movement/public class extends MovieClip

  {

  var ch1:Character;

  public void Movement()

  {

  CH1 = new Character();

  }

  Movement

  function onKeyDown(event:KeyboardEvent):void

  {

  If (event.keyCode is keyboard. TO THE LEFT)

  {

  VX = - 5;

  }

  Else if (event.keyCode == keyboard. LAW)

  {

  VX = 5;

  }

  Else if (event.keyCode == keyboard. UPWARD)

  {

  Vy = - 5;

  }

  Else if (event.keyCode == keyboard. DOWN)

  {

  Vy = 5;

  }

  }

  function onKeyDown(event:KeyboardEvent):void

  {

  If (event.keyCode == Keyboard.LEFT |)

  event.keyCode is keyboard. LAW)

  {

  VX = 0;

  }

  Else if (event.keyCode == Keyboard.DOWN |)

  Event.KeyCode is Keyboard.UP)

  {

  Vy = 0;

  }

  }

  Move the character

  function onEnterFrame(event:Event): void

  {

  move the character

  Character.x += vx;

  Character.y += vy;

  }

  }

  }

  }

  You have two functions named onKeyDown.  You must have different names for the functions in the class.

• Import a specific package of the dump file

  Hi all
  
  I am using Oracle database 11 g Release 2. I want to import only a single package from the dump file. Is there a way to do this using utility impdp .
  
  Any help will be much appreciated.
  
  Thanks in advance
  Bilal

  Please read it. Here you answer.
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:2916462485704159:P11_QUESTION_ID:743825617527

• Duplicate first detected package - VPN 3005

  We had a few problems to connect to a remote office associated with our Head Office of neighborhoods using an ADSL link, with only 1 IP address public. Remote Desktop doesn't have any VPN equipment, so we use only customer Cisco VPN on W2K and W98.

  Everything works for the first customer, it connects and works very well. The problem is that other equipment use the same IP to the Internet, so I think the VPN 3005 answers the request of session to the computer that it is already connected and the second PC expects a response until it delays.

  Any ideas? Is it necessary to get a VPN on the other side equipment and LAN to LAN VPN?

  Thanks in advance,

  Juan Diego

  The VPN client and the hub have a feature in them called NAT - T, where they detect that they're going through a NAT device and automatically encapsulate everything for UDP port 4500 packages, which should then be PAT would have correctly.

  Check this is enabled in the properties of customers, and on the hub under Config transparency - system - Tunnelling profits - IPSec - Nat, you must be good after that.

• Need to duplicate the package through the code

  I'm about to upgrade the package body. I don't have a direct access to the database. However, there will be a dba that will run the scripts for us. I can't be sure that the script into Production is the same as the script that I sent you. To the idea of disaster recovery, I would like to replicate the script and rename it "script_name_BAK".
  
  I know I can do this by copying the script and renaming. Because I only have access, can I send on a script that will do I need?
  Also, when I ask the script, it cut so many characters to the right (perhaps 80). I hope that a copy of the script is not the same gap. It will be?
  
  
  Thank you.
  
  
  Daniel

  2yzzy says:
  I'm about to upgrade the package body. I don't have a direct access to the database. However, there will be a dba that will run the scripts for us. I can't be sure that the script into Production is the same as the script that I sent you. To the idea of disaster recovery, I would like to replicate the script and rename it "script_name_BAK".

  I know I can do this by copying the script and renaming. Because I only have access, can I send on a script that will do I need?
  Also, when I ask the script, it cut so many characters to the right (perhaps 80). I hope that a copy of the script is not the same gap. It will be?

  Thank you.

  Daniel

  Why not inform the ADMINISTRATOR who must be part of this process and ensure that it has a valid "backup" this package until he applies the change that you send. Sounds like something I don't want to be aware of if I was in his place.

  In general resembles your store needs serious work on it's versions of the code and procedures management strategies.

• is there a better way to remove exact duplicates in my iTunes library, clicking on maintain organized the iTunes media folder is not working is not on for me

  is there a better way to remove exact duplicates in my iTunes library, clicking on maintain organized the iTunes media folder is not working is not on for me

  Do not automatically methods automated in the treatment of duplicates. There are several types of duplicates and how they should be solved is different.

  How to find and delete items duplicated in your iTunes library - http://support.apple.com/kb/HT2905

  More posts by turingtest2 on different types of duplicates and techniques - https://discussions.apple.com/thread/3555601 and https://discussions.apple.com/message/16042406#16042406 (Note: DeDuper script is for Windows).

  http://dougscripts.com/iTunes/scripts/SS.php?SP=scanfordoubleentries

  http://dougscripts.com/iTunes/iTInfo/Dupin.php (commercial) There are other similar tools, including a version much sooner this package called "duplicates iTunes Corral", which I'm sure that would reveal a general web search.

  For example, Corral iTunes duplicates a mod. Eric Pugh - http://opensourceconnections.com/blog/2006/11/11/better-itunes-song-deduping/

  May 2014 post on iCloud duplicates - https://discussions.apple.com/message/25867873#25867873

  See the exact replica (Mac and Windows) - https://discussions.apple.com/message/16951281#16951281

• How to take a column of duplicate names and fill a different column with the same names, excluding duplicates?

  How to take a column of duplicate names and fill a different column with the same names, excluding duplicates?

  I find easier to use this copy separate Automator Service (download Dropbox).

  To install in your numbers > Services, double-click menu just the package downloaded .workflow and if necessary give permissions in system preferences > security & privacy.

  To use, just:

  1. Select the cells in the column with duplicate names.
  2. Choose separate copy in numbers > Services menu.
  3. Click once in the upper cell where you want the deduplicated values appear.
  4. Command-v to paste.

  SG

• The flaw in LabVIEW Tools Network: VI Package Manager

  Initially, I was impressed by the network of LabVIEW tools (see here).  Sound seemed like a 'plus' for everyone:

  -Producers who did not want to reinvent the wheel, could easily find and download code with the help of the Package of VI Manager.

  -Developers who want to sell their code, could easily package it and sell it through market Tools Network (similar to the iPhone App Store).

  But then I found the flaw: the Package of VI Manager

  (Essentially), developers must use the VI package manager if they want to sell their code... and it costs $999.  And you will need to add on the cost of a LabVIEW license ($2 k +), of course.  It will surely elimate many coders to participate.  Actually, this will probably double also artificially increase the price of all the SW sold on the network of tools.

  And by the way: why is OR relying on a tool SW third delivery for their market at all?  Especially one that costs developers $1 k to package their add-on?  Why NOT just build their own packs of VI and dump JKI tools Manager all together?  In this case, their own package of construction manager would be wise to NEITHER.  Cut ot intermediaries.  And after all, does not NOR do this Endevo when they built their own tool LVOOP (thus 'dumping' toolkit GOOP of Endevo into oblivion?).

  Oh... and I've got someone at - it remember that Apple only charges $99 developers distribute iPhone apps?  And their development environment is given completely free.

  
  

• Remove duplicates of a 2D matrix

  Hello

  the output of a test is stored in a 2D array. It's actually a hyperterminal session text dump that is converted to a 2D array.

  I have attached a vi with some sample data and the expected results of these data.

  I can't make it work and I am fighting to familiarize themselves with what do I do to make it work.

  The actual raw data looks like this:

  Checking flash chip... PAST!
  Checking status of processor... PAST!
  -Software: 0 x 0065
  -Hardware version: 0 x 0104
  Chip ID checking... PAST!
  -counter ID: 0x3400001594AA2801
  Verification of the ADC and accelerometers. PAST!
  -Auto test result... 0x003F
  Verification of real-time clock... PAST!
  Move the magnet in place and press ...
  Checking of the reed contact... PAST!
  Are all segments of the LCD and all the lights off? (Y/N)... PAST!
  Are the three LEDs on? (Y/N).................... PAST!
  Present LCD segments? (Y/N)................. PAST!
  Enter the file number: 5002

  For each tested unit I retrieve the version of the software file number, meter ID, hardware version, and gites test result.

  But if a device is tested a number of times, the same meter ID will be saved, but only the last instance of the test I need

  I need to remove the previous data instances and duplicates are not necessarily adjacent in the table.

  LabVIEW 8.6

  Hi sebster,

  Try this:

  

• Error! : duplicate definition for 'org.kxml2.io.KXmlParser '.

  Hi all

  Below I have attached my code using KSoap2.

  The following error message get up when I run the project.

  ".. \lib\kxml2-min-2.3.0.jar(org/kxml2/IO/KXmlParser.class): error! ': duplicate definition for 'org.kxml2.io.KXmlParser', in: org.kxml2.io.KXmlParser.

  I looked in the forums of BB, but I can't solve this problem...

  Please tell me hoe to solve this problem

  package mypackage;
  
  import java.io.InputStream;
  import java.io.OutputStream;
  
  import javax.microedition.io.Connector;
  import javax.microedition.io.HttpConnection;
  
  import org.ksoap2.SoapEnvelope;
  import org.ksoap2.serialization.SoapObject;
  import org.ksoap2.serialization.SoapSerializationEnvelope;
  import org.kxml2.io.KXmlParser;
  import org.xmlpull.v1.XmlPullParser;
  
  import net.rim.device.api.compress.GZIPOutputStream;
  import net.rim.device.api.system.CoverageInfo;
  import net.rim.device.api.system.WLANInfo;
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.FieldChangeListener;
  import net.rim.device.api.ui.component.ButtonField;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.container.MainScreen;
  
  /**
   * A class extending the MainScreen class, which provides default standard
   * behavior for BlackBerry GUI applications.
   */
  public final class MyScreen extends MainScreen
  {
      /**
       * Creates a new MyScreen object
       */
      public MyScreen()
      {
          // Set the displayed title of the screen
          setTitle("MyTitle");
          ButtonField bf = new ButtonField();
          add(bf);
          BenoListener benoListener = new BenoListener();
          bf.setChangeListener(benoListener);
      }
  
      public class BenoListener implements FieldChangeListener {
          public void fieldChanged(Field field, int context) {
              try {
                  String serviceNamespace = "http://www.google.com/Services/google/";
                  String soapAction = "http://www.google.com/Services/google/Login";
                  String methodName= "Login";
                  String result = "";
                  String begin = ""
                          + "http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\" xmlns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\">"
                          + "";
                  String end = "" + "";
                  String soapBody =begin;
                  soapBody += "http://www.google.com/Services/google\">";
                  soapBody += "";
                  soapBody += "[email protected]";
                  soapBody += "";
                  soapBody += "";
                  soapBody += "12345678";
                  soapBody += "";
                  soapBody += "";
                  soapBody += end;
                  SoapObject rpc = new SoapObject(serviceNamespace, methodName);
                  SoapSerializationEnvelope envelope = new SoapSerializationEnvelope(SoapEnvelope.VER11);
                  envelope.encodingStyle = SoapSerializationEnvelope.ENC;
                  HttpConnection connection = (HttpConnection) Connector.open("https://services.google.com:8443/axis2/services/api/V1.0/GoogleServices"+ getConnectionParameter(),Connector.READ_WRITE);
                  connection.setRequestProperty("SOAPAction", soapAction);
                  connection.setRequestProperty("Content-Type", "application/x-gzip");
                  connection.setRequestProperty("Content-Encoding", "gzip");
                  connection.setRequestProperty("Accept-Encoding", "gzip");
                  connection.setRequestProperty("Content-Length","" + soapBody.getBytes().length);
                  connection.setRequestProperty("User-Agent", "kSOAP/2.0");
                  connection.setRequestMethod(HttpConnection.POST);
                  OutputStream os = connection.openOutputStream();
  
                  zipRequest(os, soapBody);
  //              os.write(soapBody.getBytes(), 0, soapBody.getBytes().length);
  //              os.close();
                  soapBody = null;
                  InputStream is = connection.openInputStream();
                  XmlPullParser xp = new KXmlParser();
                  xp.setFeature(XmlPullParser.FEATURE_PROCESS_NAMESPACES, true);
                  xp.setInput (is, null);
                  envelope.parse(xp);
                  result = (envelope.getResponse()).toString();
                  Dialog.alert("Result---"+result);
              } catch (Exception ex) {
              }
  
          }
  
          private String getConnectionParameter() {
              String connectionParameter = "";
              if (WLANInfo.getWLANState() == WLANInfo.WLAN_STATE_CONNECTED) {
                  connectionParameter = ";interface=wifi";
              } else {
                  int coverageStatus = CoverageInfo.getCoverageStatus();
                  if ((coverageStatus & CoverageInfo.COVERAGE_MDS) == CoverageInfo.COVERAGE_MDS) {
                      connectionParameter = ";deviceside=false";
                  } else if ((coverageStatus & CoverageInfo.COVERAGE_DIRECT) == CoverageInfo.COVERAGE_DIRECT) {
                      connectionParameter = ";deviceside=true";
                  }
              }
              return connectionParameter;
          }
  
              public void zipRequest(OutputStream io, String data) throws Exception{
                  try{
                      GZIPOutputStream gz = new GZIPOutputStream(io);
                      byte[] bytes = data.getBytes("UTF-8");
                      gz.write(bytes, 0, bytes.length);
                      gz.close();
                  }
                  catch(Exception ex){
                  }
          }
  
  }
  }
  

  I solved this problem of "Preverify" jar

• Duplicate definition

  Hello. I get the following message appears when I try to compile and run my project on the BB Simulator.

  Packaging Project ProjectName failed

  Error! : duplicate definition for 'org.kxml2.io.KXmlParser', in: org.kxml2.io.KXmlParser

  Now, it makes sense because I have references to kxml2 - ksoap2-j2me-core-prev - 2.1.2.jar and 2.3.9.jar, which contain the org.kxml2.io.

  My question is simple. How can I get rid of one?

  The two pots contain required files I am looking to just remove the org.kxml2.io of one or the other.

  Thanks in advance.

  Problem solved. Just find the .jar to your hard drive file and rename it so that the extension is .zip. Then from there, you can go and delete all you want.

  Be sure to rename it to .jar.