During the compression of an entire disk in XP, combine multiple files to single-sector?

Similar Questions

• HP Officejet 7610: Scan of the computer cannot be activated or scan and combine them into a single pdf document.

  I've recently updated to macOS Sierra 10.12 and scanning to HP computer software cannot be located when I open the HP utility.

  I can't find a further recommended HP software for my device other than El captain in operating system online.

  If I try to scan through preferences systems for printers and Scanners I can open the scanner, but I can't create a PDF combining into one document - it cancels the procedure after about 2 pages!

  The scan HP Destinations 'PDF for Adobe Reader' is red 'could not locate the target application that might have removed or uninstalled. File format = "PDF".

  How can I get that back?

  Thank you

  Hi @JOGL,

  Thank you for joining the HP Forums!

  I understand that computer analysis can not be activated as well as the scan and combine them into a single pdf document. With your printer HP Officejet 7610. I am pleased to see that for you!

  At this time for this model. There is no software and drivers for Mac OS X 10.12 again, given that the operating system has just been launched, it could take some time. For the time being, you can try to use HP Easy Scan to see if that can meet your scanning preferences. In otherwise, all we can do is wait for the software and drivers to be released.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Thanks for posting and have a nice day!

• Combine multiple files into a single file adobe adobe - do I need to buy additional products other than the adobe reader software

  I don't seem to be able to combine multiple adobe files into a single adobe document.  Do I need to buy an additional product for this in adobe reader?

  Hi Art Brock,

  You can buy the Adobe PDF package to combine the files using Adobe Reader, if you must use Acrobat Reader DC for this task.

  You can purchase the subscription by using the following link: online PDF converter, convert to web or Acrobat Reader | Adobe PDF Pack

  Kind regards
  Rahul

• My DVD burner has crashed during the creation of media recovery disks.

  HP Pavilion p7 - 1269c using Windows 7 Home premium desktop PC. How to reset the creation process so the Recovery Manager will allow me to start over again?

  As far as I know, you don't reset the creative process. If the HP Recovery Manager thinks that he has created a set of discs, it's done. Please contact HP and ask for a free set of disks. Explain your situation to them.

• LV 2011: How to load drivers during the installation of downloads (not disks)?

  Hello-

  I tried to install LV 2011 and the RT and FPGA modules in the files to download on the Web site of NOR.  At the end of install it the two LV and real-time Module development system, I get the following message:

  

  I don't have a CD of drivers available.  I have the Drivers\Aug11\Products of device OR downloaded from OR or folders, but cannot get the prompt above to recognize anything in this hierarchy as a legitimate target.  What is the right way to proceed here?

  By context, I hope that that this issue will shed light on a problem I had simulating a cRIO chassis, as I've described here:

  http://forums.NI.com/T5/LabVIEW/no-option-to-simulate-cRIO-device-after-installing-LabVIEW-and/m-p/1...

  Thank you guys a lot.

  Simply choose "later." When you start the installation, just choose the option not to install device drivers (there is an option there).

  Then, download and install the drivers concerned. For modules FPGA and RT, which will be the OR-RIO driver you can download.

• ERROR during the generation of Proxy for BWS and Service Web BWSUtil files

  I'm trying to configure web service for BlackBery 10 infrastructure.

  I followed the steps in http://docs.blackberry.com/en/admin/deliverables/49270/dme1348595223038.jsp

  When I run the command as shown in the doc, I got the below error. Let me know, what went wrong. Thank you.

  ERROR:

  WSDLToJava error: org.apache.cxf.wsdl11.WSDLRuntimeException: unable to create the wsdl definition of: https://bes101.blrresearch.com:38443 / business/admin/ws? wsdl
  Caused by: WSDLException: faultCode = PARSER_ERROR: the analysis of problem 'https://bes101.blrresearch.com:38443 / business/admin/ws? wsdl ".: javax.net.ssl.SSLHandshakeE"
  Xception: sun.security.validator.ValidatorException: building way PKIX failed:
  sun.security.provider.certpath.SunCertPathBuilderException: could not find valid
  path to certification for target asked

  Thank you

  It was instead of update of wsdl2java.bat, I've updated wadl2Java.bat.

• Muse BREAK during the postback.

  This is something new, but in an attempt to publish a Web site,.

  When it crashes all the muse gets about 55%.

  I tried to reboot the computer, not help either...

  Because it started just happening today, I have not determined if this is the site I'm trying to publish or

  a problem of software with Muse

  Does anyone else have this problem?

  For those who encounter an error "Cannot find CSSSheet for the page." When you try to publish to Adobe Business Catalyst, the solution is to disable the feature in the browser in the advanced Panel of the properties of the Site. This error will be corrected in a 2015.1.1 update.

  For those crashing then publish or download, or encounter an other error during the download/publish, please provide more details about exactly what you're having and that you try to do when the error/incident occurs.

  You post on BC or using FTP Upload? If both fail, it is very useful for us to know if the file > Export HTML is done properly or crashes also or it generates an error.

  What kind of 'crash' is underway? Is there an error of Muse? If so, please provide a screenshot. If not, is there an error in the operating system? If so, please provide a screenshot. If it is an Apple's report of Crash dialog, please click 'Détails' or 'Report' and copy and paste the first 3 or 4 pages of the report in an answer here. If there is no error messages, crashes just Muse appearing to do nothing, a screenshot of the progress dialog box is useful for us to know where things are being export/upload.

  If you do include screenshots, so please let us know Mac or Windows?

  If publish/download fails, but the file > export to HTML works, please take a look at the size of the files in the 'active' exported file, if one is created. Customer FTP in Muse is not designed to download large files. If one or more files in the current folder are significantly more than 20 MB, it may cause the Muse to hang or crash during the download process. If you need to have large files on your site, we recommend that they be downloaded using an external FTP server of the program, and then linking to their site using normal hyperlinks within the Muse.

• Records of files does not display during the recording of the converted web page in Internet Explorer

  I have recently installed Windows 10.  I use Acrobat Pro 10.  Now, when you convert a web page in an Acrobat document, when I click on "Save as", most of the shirts in my OneDrive folder do not appear.  This only happens during the conversion of a web page to a pdf Acrobat file.  If I save the web page converted into my office and open it from there, I can see and access all the OneDrive file records.

  Any idea what's going on here?  I tried uninstalling and reinstalling Acrobat but that did not help.  Thank you.

  Acrobat X (10) is not compatible with Windows 10.

• Encrypting the entire disk - Satellite A200 - 1 G

  Hello!

  I have a big problem and the search for any solution. Firstly sth on my configuration components, and the portable computer hardware.
  It's Toshiba A200 - 1 gb (European product code), which is the Santa Rosa with Intel Core 2 Duo T7300 platform on Intel P965 chipset. It comes with a SATA drive and I think with AHCI enabled (?) (I have no possibility of control via the bios). In the end it is ATI HD2600 Mobility.

  Problems:
  Vista HP - installed via Recovery disk from Toshiba, after installing, everything is ok, after encryption (no matter if "while working" or"boot"), I often receive BSoD like a fist in my face almost every 10 minutes: /.

  XP PRO SP2 - installed as any new install, after encryption I get BSoD occasionally and bugs as "Socket buffer overflow" or more often "could not write to disc - something with disc buffer.

  I'm looking for solutions, there's a pretty big chance that these errors are not connected with Compusec (although all reported cases after WDE), perhaps it's because third-party drivers or smth.

  If at the end of my question:
  1. are there any known issues with CompuSec or general with Encrypting the entire disk to my Toshy?
  2. What is that AHCI - enabled or disabled?

  PS: I'm losing hope... in fact my drive is 200 GB, such encryption takes so long to buy tiles there encryption only with one

  Hey,.
  So, is not an easy task because barely anyone here working with it. Have you already talked to the application programmer? I checked the site and does not guarantee that the drive encryption works under all the configuration of the computer.

  So, maybe you can try encryption TPM that is built into Vista and can encrypt your drive too. It s secure and it costs nothing. It s do the same job as your compusec and you have officially supported by microsoft.

  First, update the bios and check your bios settings. I can't really help you because I have never worked with this compusec, but you should visit the site Web of EC Infosystems and ask in their forum for bugs with tohshiba books/Santa Rosa platforms/etc...

  I hope that you have little chance, if not I suggest you try the TPM.

  Cheeers

• Error: "there was a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres" during the installation of Dungeon Siege.

  When I try to install it it comes up with an error about 16% in the installation, saying that there is a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres

  Any ideas?

  Hi MouseToe,

  What version of Dungeon Siege you trying to install?

  The cause of this problem could be the corrupted resource (.dsres) file or disk error. Here are some things you can do to solve the problem.

  Method 1: Run the disk check.

   

  Check the integrity of your hard disk for lost clusters and errors.

  To do this, follow the steps in this article: check a drive for errors

  Method 2: Defragment the hard disk.

  This improves the performance of your hard drive.

  Reference: improve performance by defragmenting your hard drive

  Method 3: Run the game as administrator.

  Here's how:

  (a) right click on the game configuration file.

  (b) choose 'Run as administrator'.

  Method 4: Try to install the game in a different folder or to a different drive

   

  Try to install the game in a different folder. If the computer has another hard disk, try to install the game on the other hard drive.

  Follow these steps.

  a. Insert the game disc in the drive.

  Note: Do not click on Quick Installation during installation.

  b. follow the setting menus until you see the change button.

  c. click change.

  d. in the path box, delete the existing path, and then type the following text:

  drive: \Program Files\Microsoftgame name Games\

  In this example,drive is the letter of the hard disk drive and the name of the game is the name of the game you are trying to install.

  e. click OK when finished.

  f. follow the instructions that appear on the screen to install the game.

  This should be it.

  For more information, please visit:

  http://support.Microsoft.com/dungeonsiegeiifaq

  For additional assistance, please post your concerns at the forum below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• Power output during the disk check currently not able to boot to the desktop

  Power output during the disk check.  Now, does nothing.

  I started my system, he said to check the disc. The disk check began, he had run for a while. Then my power is out for a few seconds. Once the power was back on that I tried to reboot and nothing. The monitor shows no info yet. Just black says no signal and turns off. I have no option to boot or anything else besides. What I can do. Thank you

  Hello

  You did it of any material changes or software on the computer before this problem?

  You can connect the monitor to a different display port or connect another monitor if possible and check if it works very well.

  If the monitor is right, it implies that there is a problem with the graphics card or motherboard. In this scenario, I recommend you contact the manufacturer of your computer for help.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Insufficient disk space" error message during the upgrade to windows vista business to windows 7 Enterprise.

  Hey, I'm trying to upgrade my Vista Business OS to Windows 7 Enterprise. During the 5th stage of the upgrade, i.e. While "transfer files, settings and programs", the process stops at 72% and a message error that "not enough disk space. I have more than 20 GB on my C: drive. I tried to go through different solutions of circumvention, but noon seem to work. Any help will be appreciated.

  For lack of other options, I finally decided to do a clean install. Result: great! Looks like my laptop is brand new, and I have total control over the programs I want to install and the junk that I finally got away with. in any case, thanks for the answers!

• Can I hard restart during the disk check?

  I had a few friends and customers who had annoyed long check discs, which some have not read the menu and cancel the check before he started. I was wondering if do a hard reboot (holding the power button down) would cause any irreparable harm for disks being checked.

  If chkdsk is run with options to fix file system errors or to investigate and fix bad sectors, and the program has found such and is be in the method of determining when the hard reset is complete, the files will be damaged. However, there is no physical damage to the disk. How that the effects of the system depends on what file (s) is/is damaged.

  If chkdsk is run without parameters, the difficulty value system errors or scan file and difficulty of the sectors, audit only the disc bed and do not write on the disc. No error not desirable by putting an end to arbitrary test.

  If the system goes in chkdsk on startup, which means that during the last use of the machine, before the last stop, one or more file i/o errors were detected and therefore the "dirty"indicator disc has been defined and chkdsk scheduled for the next boot. He should be able to complete, errors fixed. If it recurs, the cause must be sought.

  As part of this, download the software for reader to check on the website of the manufacturer of the disk. Download the version that is burned to a CD or DVD. Do this. Boot from the CD/DVD and run the tests.

  Tom Ferguson

• I have improved my 5 LR to LR CC 2015. I realized that the LR Catalog backup file (which accumulates during the exit process) fell 2.8 GB (LR 5) to 270 MB, probably due to compression. Can I be sure that the shrunk backup file contains everything what he

  I have improved my 5 LR to LR CC 2015. I realized that the LR Catalog backup file (which accumulates during the exit process) fell 2.8 GB (LR 5) to 270 MB, probably due to compression. Can I be confident that the shrunken backup file contains everything it should?

  Lightroom CC 2015 to zip the backup catalog file, it should be much smaller. So, based on what you said, I see no evidence that something has gone wrong.