Dv6-6189sx: switchable graphics driver installation problems

Similar Questions

• Graphics driver installation problems - Qosmio G20 PQG21

  Try to install the latest graphics driver (available on the website of toshiba in the United Kingdom) produces an error message this file NV4_mini.sy is unreadable, even if it's there. Any ideas?

  I tried several times to download and decompression in various places. Incidentally, do toshiba have no technical support at all, or is it left to their customers to provide free of charge to each other - they don't seem to have any method of contact on their site?

  Have you downloaded the graphics driver on the right for the right OS and you're sure you Qosmio G20's series of PQG21?

  Try to download the driver from this page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  The installation process is very easy. After the decompression of the files, you must start the setup.exe or if missing the setup.exe, you can install the diver from the Device Manager.

• Pavilion G6-2240em (C6C29EA) - switchable graphics driver problem

  Hi all!

  I have some problems with my switchable graphics driver version 8.982.10.1600 which is I guess obsolete (Intel HD 4000 + AMD Radeon 7670 m), since I updated my OS to 8.1.., I noticed that I was unable to open certain programs such as Skype, steam, WMC etc..., I also checked also in the event viewer for the error log, and it shows me what...

  

  

  is it possible to get new driver for 8.1 versions soon?

  Thanks in advance!

  Hello:

  Please read the thread below for another Member of the forum how to have switchable graphics to work on a 4540 Probook s that has the same graphics card than yours.

  Try the steps in Riri91 .

  http://h30434.www3.HP.com/T5/notebook-display-and-video/ProBook-4540s-with-Windows-8-1-64bit-can-t-i...

• HP 15-ay005TX: can not adjust brightness Evenafter the graphic Driver installation

  Recently introduced Hp 15-ay005TX Notepad. Installed with Windows 10. I downloaded and installed the grapics drivers listed on the hp Web site. Installled AMD/Intel Switchable Graphics Driver and Intel graphics driver high definition (HD). I tried several times to reinstall.  When I tried to open the Radeon setting it shows this. I can't find anything else.

  I found the solution. Only, I installed the update of the bios. After the update the problem sloved...

• U330 Switchable Graphics Driver Windows 7?

  Hi all

  Just got my new switchable u330 with switchable ATI Radeon HD 3450 graphics. Made the switch to Windows 7 last night and just published in a bunch of problems, especially the lack of access to the switchable graphics.

  I have checked the Web site of the main breadwinner and found virtually all the other drivers that I need, except the switchable graphics driver. I do not understand that the Thinkpads have switchable graphics drivers on the download site, but there is currently no Ideapads.

  Anyone solve this problem? Should I go back to windows vista in order to use this ability? Pretty crappy, if that's the case. I'll be even able to run again, even if I switch back? I'd really appreciate any input you guys can provide.

  Thank you!

  The closest official response is that the official driver of Windows 7 will be available on or about the public Microsoft October 22.

  In the meantime you can troubleshoot by testing the drivers beta Windows 7.

• switchable graphics driver for windows 8

  HP Pavilion dv6-6166se switchable graphics AMD Radeon HD 6490 M windows 8 x64Bit driver

  Hello

  Try this driver below

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-112999-1

• HP 802. 11b / g wireless network: HP 802. 11b / g wireless network adapter driver installation problems

  After installation of Windows 10 does not work me wi - fi, I can not find a compatible driver. The search I found one, but it gives me driver installation problems

  Hello @fede95,

  Thanks for posting on the Forum of HP and welcome!

  I'd be happy to help you with wireless driver problems you encounter since the upgrade to Windows 10.

  I will need to know your product number. You can follow the steps here - http://ow.ly/XnZL300dhzo - to find.

  I'm looking forward to hear back and work towards the resolution of this problem.

  If these steps solved your problem, please click "Accept as a Solution." You can also click on the "congratulations, Thumbs Up" on the right to say "thank you!"

• switchable graphics driver for DV6-3131tx ATI mobility radeon 5650 for Windows 8

  Hi, I have a laptop HP dv6 3131tx (64-bit). I just recentley upgraded to Windows 8 since my laptop is supposed to be compatible to the HP Web site.

  I can't find drivers for my card (ATI radeon 5650 including) 1 GB switchable graphics.

  Because of this problem, I can not connect my laptop to do anything with my HDMI cable, I can't use software such as AutoCAD (software engineering), I can not play almost any game that required the decent graphics and my laptop runs out real costs quickly becausei can't change my graphics mode.

  I also tried with the driver of windows 7 in compatibility mode, but even that is no problem.

  Really need help. As soon as possible. Thanks in advance.

  Hello

  It would look like HP do not go to your laptop for Windows 8 support - you can check if you enter your XV784PA NR the Site to upgrade Windows 8

  My best advice would be to use 3rd party personalized graphics drivers switchable such as those found on the following link - these were a success with people using switchable graphics who want the latest drivers.

  http://leshcatlabs.NET/

  I suggest strongly to read the Manual about installing these drivers and to understand why driver signature enforcement must be disabled to load these custom drivers.

  Best regards

  DP - K

• Problems of ThinkPad T410s switchable Graphics Driver to Version 8.16.11.8955 models / 1.0.15.0

  Hello

  I have a Windows 7 64 bit Pro its own. installation on my t410s 2904 FYG (no driver no additional software-> windows only). The pilot 8.16.11.8955 / 1.0.15.0 (NVIDIA Display Driver for Windows 7 (64 bit) - ThinkPad T410s (switchable graphic models)) does not work on a new install of Windows 7 64-bit.

  If you update the old version with it, it works... Unfortunately you can not download the old driver on lenovo support page

  Maybe there is a problem with this change?

  NView Desktop Manager application collected in this package. Refer to the
  Remarks section for more information.

  Any ideas?

  
  

• Intel HD graphics driver installation error: "computer does not meet the minimum requirements.

  Hello

  I tried to update the Intel graphics driver in my notebook using sp55098.exe , but the system returned the following error:

  "This computer does not have the minimum requirements for installing the software.

  I have the following: dv6-6b05tx laptop computer running windows 7 pro 64

  It's the device I am trying to update:

  Intel HD Graphics Family
  Current driver date: May 7, 2011
  Current version of the driver: 8.830.6.3000

  I tried the drivers on the Intel site, but they do not work either.

  Help, please.

  Thank you very much.

  PS

  I managed to update the drivers of AMD Radeon HD 6700M using this link of guru3d.com.

  But I can't find a similar solution for the Intel card.

  Hello:

  Please read the notes on the AMD driver file...

  Description:

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  The Intel driver is only for the models with only the Intel UMA graphics adapter.

  You must live with what version of the video, Intel is in the AMD driver package.

  Paul

• Envy 17 3010eg: upgrade to Windows 8 and update Bios: no switchable graphics and other problems

  Hello

  I'm of the Germany, but I'll do my best to write this in English.

  The product name and number: HP Envy 17 3010eg {information}

  Operating system: Windows 8 Pro 64-bit

  Drivers: everything up to date

   

  Long story short,

  I just wanted to upgrade the pre-installed Windows 7 Home Premium 64 - bit to the new Windows 8 Pro 64-bit.

  So I waited until the driver for Windows 8 support has been completed by HP.

  This month, I noticed that HP has released a graphic driver for Windows 8.

  Happy as I was I installed Windows 8 immediately via upgrade function.

  I installed all the missing drivers.

  * Update Bios to F.08*

  I noticed that I had to upgrade my Bios to version F.08 to install new graphics drivers. I did the upgrade and installation of the driver.

  BUT after the update to the version of the Bios the laptop only F.08 recognized the AMD graphics card. The integrated Intel HD 3000 graphics card had disappeared!

  Even after installing the new graphics driver, the Intel card is still missing in the 'Device Manager' of Windows 8.

  The battery life is now about 1 1/2 to 2 hours maximum because the laptop always uses the card AMD.

  So I looked in the 'new' Bios, but I have not found a way to change the graphics card. So I think that there is only a 'software' switch to do so.

  I have installed "AIDA64"and look under "Graphics".» The graphics card Intel HD 3000 has been mentioned as 'disabled'.

  Nice, but I have no idea how to turn it on again.

  So I re-installed Windows 8. This time, I did a completely clean install. With the same results.

  So, I switched to Windows 7, and there you go. Two graphics cards are displayed in "Device Manager" and the switchable graphics feature works perfectly (! even with the new version of the Bios F.08!).

  * Tested in Bios Version F.09*

  Yesterday, I noticed another Bios Update. This time in version F.09.

  So, I updated the Bios with Windows 7 installed.

  Everything went well (I thought!).

  Once, I've done a completely new installation of Windows 8 to take a peek, if Intel HD 3000 card will be recognized this time.

  BUT without success...

  So, I thought that the problem could only be Windows 8, because Windows 7 works perfectly.

  * Problems with Bios Version F.09*

  BUT then, I noticed a strange behaviour of my laptop:

  -proximity sensor no longer works

  -the keyboard backlight cannot be (DIS-) activated

  -the brightness of the backlight is half as usual

  -internal fans are going crazy-> they accelerate without reason (laptop is idle) and won't slow down until I do a re-boot

  * Version of the Bios downgraded to F.05*

  So, I spent to the version of the Bios to the older Version available: F05

  And I was a little shocked by the result.

  Windows 8 acknowledged the Intel HD 3000 graphics card again!

  The problem is the Bios!

  Then, I upgraded the version of Bios version to see which version of the cause of the problem:

  Œuvres F05

  Œuvres F.06

  F.08 does not work

  F.09 does not work

   

  So I decided to stay with the version F.06

  BUT to install the new Windows graphic 8 driver you need the version of Bios F.08 (min.).

  I installed the driver anyway...

  I found myself with a black screen... I had to reinstall Windows completely.

  Yet more long story short,

  I ended up using Windows 8 Pro 64 - bit with the graphics card AMD only.

  I also updated the Bios (back) to the version F.08 dispelled the problems with the version of the Bios F.09 I mentioned.

  So for the moment I am absolutely no idea what the problem might be.

  The support has not yet heard of these problems and I have not found any website which explains the same problem.

  Every posting, I found explains that the AMD card is not recognized by Windows 8 but Intel HD card.

  Someone else got the same problems?

  What do you think? Is it really a problem with the Bios?

  What can I do to solve the problem?

  for me the best driver are:

  http://leshcatlabs.NET/

  Works Perfekt (cards during execution of the F06 BIOS and a map when F08/09) and are updated often.

• Switchable Graphics driver does not [WIN7]

  Hello

  first of all, thank you in advance for all the help I can get.

  My profile: Lenovo T400 2765 TDG WIN7 32-bit

  Problem: I downloaded the switchable for WIN7 graphics driver after that I formatted my laptop completely. I started the progress of the installation and everything went very well. The driver previously installed the Intel graphics chip and then he continued with the ATI for ATI Radeon driver.

  When I right click on the desktop, I can choose to open the Catalyst Control Center, unfortunately it does not work on a click. And I can't find the function to change the graphics. This means that I am using the Intel graphics chip all the time.

  Before I installed WIN7 I had WIN VISTA and I could right-click on the energy bar and he gave me the ability to switch between graphics cards.

  Now, my question is, if I installed it incorrectly or if the driver does not work correctly.

  Everyone else encountered these problems with this driver?

  Please help me by sharing your opinion and I hope that we will get this fixed a problem.

  Thanks again for any help I can get.

  Sincerely yours.

  thyrox

  Edit: typos

  Edit2: My Device Manager does not display the ATI Radeon in the list.

  So and again once the prooves of the world to me, that the error is always the user.

  The problem is resolved.

  After I lie down the BIOS, switchable graphics was not enabled more. I activated, re-installed the driver, and that's it.

  Thanks for your help and apologies for the inconvenience.

  Sincerely yours.

  thyrox

  PS: This thread can be closed!

• Qosmio F60 - Intel graphics driver installation error

  Hello

  Some time ago I managed to destroy my Nvidia 330 M graphics card.
  I don't know what exactly happened, perhaps overheated, I just BSOD and then my system reported ERROR 43.

  I reinstalled entire windows by default with toshiba drivers but without success, the card did not work.
  I uninstalled my laptop Nvidia drivers, so my graphics card is "Standard VGA graphics card".

  I tried to find a way around, and I realized that I can use the graphics processor instead.
  I have Intel i5 - M430, so I tried to install the graphics driver intel HD only to get an error "does not meet the minimum requirements of the system.

  Can someone help me with this problem please?

  Hello

  Processor Intel Core i5 - 430 M (3 m Cache, 2.26 GHz) takes in charge the first-generation Intel HD graphics unit.
  The driver could be downloaded from the Intel driver page and you will need to choose the right
  https://Downloadcenter.Intel.com/

  Graphics-graphics drivers for laptop-Intel Core processors with Intel HD graphics card > >
  Now you should get a list of the different drivers for different system.

  Choose and download the latest driver for the system you are using.
  Note: choose the ZIP package.

  Then uncompress the package somewhere on the HARD drive (I prefer the office). Then go to Device Manager and choose the graphics card (Standard VGA graphic card)
  Now choose the driver installation and use the Advanced installation. This allows you to point to the driver package that you have unzipped on the desktop.

  This installation procedure should work very well because he worked also in my case.

• 15 - AC110TX: cannot install the AMD/Intel switchable graphics driver

  I recently bought a HP 15-110TX.

  Installed Windows 7 Professional 64

  Now, I tried to install AMD/Intel driver switchable from HP support web site, but it does not work.

  Tried to install sp72646 and sp72066, with no result.

  Driver for graphic card intel HD is not recognized and ATI Radeon is presented as does not not with code 43.

  In Device Manager, it shows up always also Standard VGA Graphics adapt.

  Tried to reinstall windows and upgrading the BIOS as well.

  Curent version of BIOS: Insyde F.11.

  Also tried to install generic as well as HP intel HD Graphics Driver and get the message that "this system does not meet the minimum requirements.

  Tried the catalyst of AMD so driver with no luck.

  Help, please. Thanks in advance.

  Name of the operating system Microsoft Windows 7 Professional
  Version 6.1.7601 Service Pack 1 Build 7601
  Manufacturer of operating system Microsoft Corporation
  Name of PRANAV_V-PC system
  The HP system manufacturer
  HP laptop model system
  System Type x 64-based PC
  Processor Intel Core i7-5500U CPU @ 2.40 GHz, 2 Lossnay, 2401 Mhz, 4 logical processors
  BIOS Version/Date Insyde F.11, 23/07/2015
  SMBIOS Version 2.8

  [Display]

  Value of the element
  Name AMD Radeon R5 M330
  Device ID PNP PCI\VEN_1002 & DEV_6660 & SUBSYS_80C2103C & REV_83\4 & 150A58D7 & 0 & 00E4
  Compatible adapter Type not available, Advanced Micro Devices, Inc.
  Adapter Description AMD Radeon R5 M330
  RAM card is not available
  Installed drivers aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, atidxx64.dll, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll
  Version 6.1.7600.16385 driver
  File INF oem14.inf (section ati2mtag_R503)
  Color of the aircraft not available
  Color not available Table entries
  No available resolution
  Bits/Pixel is not available
  Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6463, 649.00 KB (664 576 bytes), 16/07/2015 12:26)
  
  Name Standard VGA Graphics adapt
  ID device PNP PCI VEN_8086 & DEV_1616 & SUBSYS_80C2103C & REV_09\3 & 11583659 & 0 & 10
  Type available, compatible adapter (Standard display types)
  Description Standard VGA Graphics Adapter adapt
  RAM card is not available
  Drivers installed is not available
  15.200.1055.0 driver version
  INF display.inf (section vga) file
  Color of the aircraft not available
  Color not available Table entries
  No available resolution
  Bits/Pixel is not available
  0xD2000000-0xD2FFFFFF memory address
  0xC0000000-0xCFFFFFFF memory address
  IO port 0 x 00007000-0x0000703F
  Port of e/s-0x000003B0-0x000003BB
  Port of e/s-0x000003C0-0x000003DF
  Address 0xA0000-0xBFFFF
  Pilot c:\windows\system32\drivers\vgapnp.sys (6.1.7600.16385, 28,50 KB (29 184 bytes), 14/07/2009 05:08)

  Installing generic drivers of Intel and AMD has solved the problem. The drivers on the HP site do not work. It is a shame that HP is unable to specify the correct drivers for its own products on their site.

• HD4600 graphics driver update problems

  Hello - I had problems with my new pc from HP ENVY 700-515xt CTO. Somehow, the file system has become corrupted I made a recovery through the recovery Partition procedure. Who went well as far as I know.

  All updates have been applied, and a new HD4600 Graphics Driver has been installe-10.18.14.4029-18/11/2014. Now, the driver stops and restarts frequently. The site of HP Software and Driver said the most recent driver is 10.18.10.3995 Rev.A-

  June 9, 2015, but la.4029 settles. There is no way to roll back the driver Rev.A.3995.

  Please advise on this problem and help me. If you need more information, newspapers, etc., please let me know.

  Thank you!

  Tim

  Great spirits have always encountered violent opposition from mediocre minds

  On the Forum:

  After a bit of study and research, we were able to resolve this issue on our own. HP Diagnostics indicated a

  Low memory. After the execution of memory diagnostic Windows and MemTest86 +, which indicated the wasy memory very well.

  We explored elsewhere. Pilots in relevant areas have been all updated and all is well now. We can

  certainly say that there was a problem on the site HP Driver and software - someday that he downloaded the pilote.4029,.

  which is the direct Intel driver not OEM, and 2 days later, the site offers the version.3995. That, along with a

  Chipset driver update solved the problem.

  Be advised-don't take any advice also determining all things you here on the internet in one of these forums. Yes, listen to

  what people have to offer, but check their reviews with at least 2 other sources and use your good sense. Too much of

  application expertise out there and they will get you into trouble.

  Thank you for any input on my original request.

  Kind eyes-

  Tim