dv9500: base system devicedriver not found

Similar Questions

• operating system is not found in my new T450s

  Hi friends,

  I just bought my new T450s of the United States. It is pre-installed with win7 64 bit, and I upgraded to win10. After that it is upgraded to win 10, I tried to restore factory settings. Unfortunately, he failed with an error. Then I gave up and just restarted the laptop, but it cannot be turned on more with the message "an operating system was not found. I tried several times, it turns out the same result. I tried the F11 key to restoring and has not yet. The recovery disk should be destoried. In this case, what should I do? Can I bring to the Lenovo repair shop to fix it?

  Thank you in advance!

  Hello

  If your recovery partition disappeared, you need a recovery media.

  Try checking this document Lenovo:

  https://support.Lenovo.com/us/en/documents/ht035659

• I just installed Windows 7 on a part of the Dell Vostro 1500, l features notebook.__In control, I have two mistakes "Device Base system has not a driver" __There is no driver installed for the Base system device. _ No fixed

  I just installed Windows 7 on a Dell Vostro 1500 laptop.
  In the pane control, devices of l, I have two errors "device Base system has not a pilot.
  There is no driver installed for the Base system device. Not fixed
  Apply the solution to the complete driver problem
  Install a driver for this device does not work

  Troubleshooting gives me two messages:
  The first is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0592 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0BF0
  Error code: 28
  The second is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0843 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0AF0
  Error code: 28
  I cannot locate a driver through web search - how do I know what are the devices? and where can I find a driver?

  Try to update the drivers using Windows Update.  If this does not work, try the versions of Vista of Intel and Ricoh under Chipset drivers on the website of downloads & drivers for Vostro Notebook 1500 . Make a restore point first.

• I had paid yesterday, but have not received a serial number. and the system had not found my order. [was: Dear Sir:]

  I had paid yesterday, but have not received a serial number. and the system had not found my order.

  Please help, thanks.

  My E - mail; [email protected]

  Details of payment have not been downloaded, the order could not get through. You must place another order with full valid credit card.

  Concerning

  Baudier

• definition of the base class _ not found

  Hello!
  
  While exploring Flex 3 (really good btw) and build my first app, I tried the following:
  
  SerializableAttribute public class X extends EventDispatcher {}
  
  It gives me a compilation error #1017: the definition of the EventDispatcher base class was not found.
  
  To compile I am just use a file .bat, such as those used in the samples. Everything compiles normally without extending an existing class (in this case flash.events.EventDispatcher).
  Try to change the compiler options with
  -library-path += c:\flex\framework\libs
  has resulted in the same error here (and I guess that's already a default setting).
  
  Any help would be greatly appreciated!
  
  Fre
  

  It worked :-). Thank you very much, Deepa!

  So, apparently, you can make import declarations in the declaration of class (or anywhere in the code), but always before you use the imported class. I got confused, as in java, all import instructions are in the same place and import flash.net worked under my class declaration.

• recovery system option - not found any operating system, load drivers

  Hi, Im new here ^^ I am here to ask a question, he made me feel confused. I bought a laptop last year, which is (Acer Aspire 4930 G). Today morning when I turn on my laptop, it showed me all of a sudden

  PXE - 61 - test Media Failed
  No bootable devices - insert the boot CD and press a key

  I made impossible the network startup and test media is fixed. After that, I started using VISTA HOME PREMIUM recover CD and tried to fix my computer, but it seems to do the job.  These are the problems that I met

  1. once I click on "Repair my computer", it pop up a "system recovery option" forms but the operating system has not appeared and he asked me to load the drivers (not sure it takes load 1)

  2. If I continue without the operating system and I clicked on the "Startup Repair", it shows me that "cannot automatically repair withouth', is m felt confused.

  3. If I click on the "System Restore", it doesn't seem to work too.

  May I ask... How can I recover / find my operating system? and how can I solved the problem I've met? Is to make fuzzy m

  Recovey process Acer is normally a complete reinstall back to the factory settings: how you bought.

  http://support.Acer.com/

  For all questions/issues with Acer Recovery Media, contact Acer at the link above.

  It's Recovery process Acer, not Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• Base system device not installed

  After a new installation of Windows 7 Professional 32 bit on an HP Probook 6560 b I have the following problems with these devices:

  Base system device - PCI Slot 2 (bus PCI 35, device 0, function 1)

  Hardware ID

  PCI\VEN_197B & DEV_2392 & SUBSYS_1619103C & REV_30

  PCI\VEN_197B & DEV_2392 & SUBSYS_1619103C

  PCI\VEN_197B & DEV_2392 & CC_088000

  PCI\VEN_197B & DEV_2392 & CC_0880

  Unknown device - Port_ #0001.Hub_ #0003

  Hardware ID

  USB\VID_138A & PID_003C & REV_0086

  USB\VID_138A & PID_003C

  I installed all the updates and drivers of the best that I can say...

  Thanks for the help in advance!

  Mark

  Hi, Mark:

  Please visit the page of the driver and support for your laptop and download and install the driver from JMicron under storage and card reader driver sensor of fingerprint of validity, under keyboard, etc.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5045607&prodTypeId=321957&prodSeriesId=5045605&swLang=13&TaskID=135&swEnvOID=4053

  Paul

• Help! The definition of base class AlternatingCellRenderer not found.

  I just upgraded to version 4.5 Flex Final (used Burrito) previously. And installed the SDK.

  I'm greeted by this error when I try to run the application.

  In addition, there are checkmarks besize import qnx instructions. Looks like it's impossible to find the libraries.

  How can I fix it? I tried to clean up and rebuild, but that did not help.

  SOLVED!

  "Had to check ' library paths specific platform add to the paths of the compiler" in the compiler options.

• ProBook 450 G2, core-i5: operating system not found

  Hello

  I expanded the partition of my C drive with force to upgrade to windows 10 since an iso file... then after restarting, I am facing the problem "an operating system is not found. Please remove storage external use... »

  I tried to boot from the start menu by pressing F9 while restarting, but no solution met! I also tried to boot from EFI file, but does not because no options that are there found.

  The disc is also OK, checked the BIOS settings option.
  
  Now what to do?

  Spoiler (Highlight to read)

  Asif_Ahmed_Joy

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the operating system not found since the Win10 Upgrade failed and tried to help.
  
  One of the things that happened during the upgrade:

  (1) it mostly completed but failed in the writing of the new boot loader files

  (2) it failed early in the upgrade, screw up your PC as well

  Allows to process 1) first - by recreating the bootloader files.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  Once you have that, please download and create the Win10 installation media from this link: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT. If you do, the media that results will be different and will force you to enter a NEW product code.
  
  Boot from the media that you have created and follow the instructions in this link: http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-windows-10-a.html
  
  You will need to go to the Advanced Options screen and click on startup repair.  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If this does not work, then we are on option 2) - which is not good news.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.

  What will work restores your computer to its original factory state using HP recovery media.
  
  It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Equium A210 - error - operating system not found

  Hi guys

  I'm new on this Yes, you can be sweet. I have an Equium A210, 2 years old.
  Everything was fine until today when it goes off.

  I thought that it might overheat because he felt hot so cool.
  When I turned it back I get the error "Operating system"... not found This is accompanied by a constant clicking noise coming from under the laptop!

  Any ideas anyone?

  Thank you very much

  This error is known to me.
  I had too!

  It appeared after the death of my HARD drive.

  I think the BIOS does not recognize the HARD drive and therefore the operating system is not found.

  To me, it seems that you need to replace the HARD drive and then you could install the OS on the Toshiba recovery disc.

  Good bye

• Satellite Pro A200 - system does not boot

  Hello

  wondering if someone could help?
  My Satellite Pro A200 with windows XP does not start. It starts with the Toshiba screen.
  Then goes to a screen black with text where it says "PXEE61 media test failure - check cable" (I have no cable) then said out of PXErom; moves to the next screen, which lists the options: safe mode; safe mode with networking; safe mode with prompt local; Last Configeration well-known; Start windows normally.

  Which have been tried and results in loading from page turns on for about 20 seconds, then just to abandon and trying all the whole process again (before flashing a blue screen) Windows.

  Nothing seems to work - tried to take the battery on a... number oftimes and the power cable, but nothing helps.
  It's already happened, but after a few false starts gets going - but this time he just don't come out it. I could not take others where locally, but I would prefer not to because I live in Spain and need the laptop as soon as possible and do not know, I want to leave it in some otherwise are hands to the risk of wipe them the hard drive.

  So, I would be very grateful for any help as soon as possible and I fear tech short hand maybe having to explain.

  Thanks a lot, a lot.

  Hello

  I think the problem is that the operating system is not found on the HARD drive.

  The test failure PXEE61 media - check the cable appears especially if the laptop tries to boot from LAN.

  Why the laptop is trying to boot from the local network?

  Well,.

  -option may be the LAN was chosen first in the boot order in the BIOS
  -Maybe the drive is defective and so the laptop is trying to boot from LAN
  -the MBR (master boot record) is may be defective

  I think you should take the Toshiba Recovery CD and need to format the HARD drive and needs to be reinstalled the operating system.
  This should help.

  If not, then the HARD drive could malfunction and should be replaced!

• HP ProBook s 4330: working in window 10 missing/no Base system device drivers

  Hello

  I installed window 10 and since then, I have had different problems.

  Lately, I noticed that the device driver Base system is not working and also something else not identified.

  Please find below Haedware IDs for those who do not work the drivers

  PCI\VEN_197B & DEV_2393 & SUBSYS_167E103C & REV_30

  USB\VID_138A & PID_003C & REV_0086

  ACPI\VEN_HPQ & DEV_0004

  Can help you in there to fix it please?

  Thank you

  G

  Hello:

  You need these drivers for devices...

  The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp60501-61000/sp60769.exe

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  FTP://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66915.exe

  This package provides HP 3D DriveGuard to the notebook models and operating systems. HP 3D DriveGuard receives notifications of the built-in accelerometer and protects the hard drive (HDD) by automatically "the heads of parking" to reduce the risk of damage if the laptop is accidentally moved or deleted.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• an operating system is not on my compaq presario cq56

  I tried to reset my computer & reset all my drivers. Now when I turn it on, it indicates an operating system is not found. Please, press ctrl, alt, delete to restart. When I did, the message continues to appear & the computer is a compaq presario cq56. Could someone tell me what can I do to fix this?

  Mrsbailey,

  I'm sorry for what happened, I don't think you did anything just a crazy accident.

  You'll need to order the factory created to disk for this computer. If you reside in the United States or to the Canada, you can contact HP technical support to the 1-800-474-6836 or if you reside in another country, you can click on this link and then click on your country and the number is provided.

  If you have access to another computer, you can order them online.

  1. click on this link

  2. click on drivers and software

  3. Insert the product number or model number

  4. choose your current operating system

  5 scroll down to "order recovery Media.

  Because you have Windows 8 disk must be there unless the computer is so new that they were not placed on the site yet.

  Please answer as soon as possible.

  Thank you

• MovieMaker.EXE Entry Point not found

  On several computers, during the upgrade to Windows Live 2010 to 2011, I get an error after the upgrade when you try to use Windows Live Movie Maker 2011.

  The error is:

  MovieMaker.exe - Entry Point not found

  The procedure entry point? Initialize@base@YGXXZ is not found in the library of dynamic links WLXPhotoBase.dll.

  Under Win7 Service Pack 0 or 1, tried to uninstall all windows live and reinstall results in failure of the installation for just the Director.

  Any ideas?

  Hi KThurston,

  When you use Windows Live Movie Maker and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://www.windowsmoviemakers.NET/forums/

• Not found base system device driver

  Recently, at startup, I get an error message 'Base system device driver' not found. Windows cannot find the driver appropriate to solve the problem. I use a laptop Presario F756NR with Windows Vista (32-bit) OS.

  I checked the 'properties' of device and find the bus 2 PCI, device 5, function 2.

  Under status: this device is not configured correctly. (Code 1)

  There is no driver selected for the item or a set of device information.

  To reinstall the drivers for this device, click on reinstall.

  Click on reinstall just made sure another Windows search found nothing.

  I tried to download sp38689.exe with NO result.

  Help please!

  Hi, Bob:

  It's all part of this card reader controller stuff.

  I suggest that you do a right click on any card reader devices and select uninstall.

  If there is a check box to uninstall the driver, these boxes too.

  Restart the PC and if the drivers do not correctly install, download and reinstall the card reader driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-58981-1&CC=US&DLC=en&LC=en&os=2093&Product=3646836&sw_lang=

  Paul