Dynamic to basic

Similar Questions

• Convert disk dynamic disk Basic without data loss on Windows 8?

  I have a laptop with a 500 GB hard drive. I have windows 8 is installed. How can I convert this disk to dynamic disk to basic disk? Is this some Partttion managers as EaseUs allow convert dynamic disk to basic disk to the disk on which the operating system is installed?

  Hi harsh,

  The disk must not have any volumes nor contain no data until you can change to a basic disk. If you want to keep your data, back it up or move it to another volume, before converting the disk a basic disk.

  Note: If you convert Dynamic Drive reader Basic with Windows installed Windows does not start.

  For more information, see change back to a basic disk dynamic disk. (Valid also for Windows 8)

  You can also post your query to Microsoft TechNet Forum for more information.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w8itpro

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• Accidentally, I converted all my basic dynamic disks. How to convert in return?

  Hello

  I accidentally converted my basic dynamic disks. Now I am unable to run the system recovery. Please let me how can know I convert this return. I'm not bothered about any loss of data.

  Thank you

  Here are the instructions:

  http://www.SevenForums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html

• What is a dynamic disk

  I installed an extra internal hard drive. I've been asek the question I want to make this dynamic or basic disk. someone tell me what is a dynamic disk.

  Make a basic disk.

  http://www.Petri.co.il/difference_between_basic_and_dynamic_disks_in_windows_xp_2000_2003.htm

  http://support.Microsoft.com/kb/314343

• How to install the dynamic disk volume and base set

  I have 500 GB of HARD drive.

  How can I convert a 1 and 2 in basic and volume 3 in Dynamics.

  Please tell me something that is free of cost, and I don't want to use a software to do this.

  Hi Lynda,

  I'll be happy to help you with the problem you have with the computer.

  To create a dynamic disk volume, you must convert basic dynamic first of all disks. How to convert the basic dynamic disk?

  1. connect you as an administrator or as a member of the Administrators group.

  2. right click on my computer > manage > storage > disk management.

  3. in the lower pane, right-click the basic disk you want to convert, and then click on convert to dynamic disk. You must right-click the gray area that contains the title of the disk on the left side of the details pane.

  Warning: After you convert a disk from a dynamic disk basic, local access to the dynamic disk is limited to editions of Windows Windows 2000 at the latest. In addition, after you convert a disk from basic to dynamic disk, the dynamic volumes cannot be changed to partitions. You must first delete all dynamic volumes on the disk and then convert the dynamic disk to Basic.

  Thank you.

• Windows 7 Home Basic disk partition.

  Yesterday I created a disk partition in my laptop of friends using Windows 7 home basic. Now, I am unable to send it back. When I try to format it by using the default settings the error I get is. "The dynamic disk is not supported by this server." Later, I got to know that dynamic disk is not supported by Home Basic. Now what to do? I am unable to use the 150 GB partition I've done unless I format it. Is it possible that I can use this space?

  Create a separate partion to "ease the burden on partition win" is not actually going to achieve something IE doesn't go to lighten everything, leave them are part of this disk.

  I guess that if you view disk 0 to disk management shows a system reserved about 100 MB, and C the boot partition, and you already have 4 partitions on basic and if you add another partition, it must be configured as dynamic.

  You cannot convert dynamic to basic use in victory built tools.

  When you create the recovery discs, and I hope that you have done this now, if you ever have to recover your system, you will lose all you have created the partitions and all data.

  Bottom line, your goal/plan to create a separate partition is incorrect. Go back and expand C to consume all the free space.

• Cannot convert a computer unalloacted on a new space, dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  Need additional details as
  Is it a laptop or a pc?
  Have you coveted your dynamic disk basic disk?
  What the structure of partition on your computer?

  recover with these details...

• HFM consolidation rules file to dynamically Group entities

  I can't encode the HFM-file rules right to consolidate the entity dimension dynamically.
  Basically, I want to be able to load the data, and without a right click on the grid and selecting 'consolidate', I want that peacebuilding have already occurred (to automate).
  Any ideas?

  HFM consolidation rules must be called intentionally is a person (by using the right-click menu), or a software process. For the latter, you can configure a workflow using the module of automation of task that loads a file and then performs the consolidation. As mentioned in this thread, you can also use FDM to load the file and then call a consolidation, but you must configure FDM for this. Certainly another option is to write your own batch process that would do this.

  In all cases, there is no "out of the box" features (apart from my comments above) within HFM which allows a given user load a data file and also to consolidate the hierarchies associated without intervention of the user.

  -Chris

• Dynamically create (and reference) dialog groups

  I am installing a dialog window that can be easily added to via a CSV file.  The only problem I encountered is; I'm not sure how to create groups dynamically.  Basically, script upward configurations a bunch of texture features and then gives the possibility to save or delete this feature.  Here's the basic idea of what I'm trying to do, but the groups are not able to be created in the way that they are presented:

  featArray = [];
  featArray[0] = new Array("Feature Display Name","feature sub-group",'texture',"feature action",'feature type');
  featArray[1] = new Array("Feature2 Display Name","feature2 sub-group",'texture',"feature2 action",'feature2 type'); //etc.
  
  for(var z in featArray) {
      if(featArray[z][2] == 'texture') {
          w.p1.sp1.add('statictext',undefined,featArray[z][0]);
          w.p1.sp1.g[z] = w.p1.sp1.add('group');
          w.p1.sp1.g[z].orientation = 'row';
          w.p1.sp1.g[z].add('checkbox',undefined,'Save');
          w.p1.sp1.g[z].add('checkbox',undefined,'Strip');
          w.p1.sp1.g[z].children[0].id = featArray[z][0].toLowerCase() + "-save";
          w.p1.sp1.g[z].children[1].id = featArray[z][0].toLowerCase() + "-strip";
      }
  }
  

  If you change the [z] g in g1, it will create each field correctly (visually), but has no way to good reference check boxes to see which are checked.  Any ideas how, or even if, it is possible to dynamically create a different group for each line of the featArray?  And if so, how then referencing the boxes in these groups later?  Thanks in advance for any help!

  You must store the locations in a table IE: -.

  featArray = [];
  featArray[0] = new Array("Feature Display Name","feature sub-group",'texture','feature group','feature type');
  featArray[1] = new Array("Feature Display Name2","feature sub-group2",'texture','feature group2','feature type2'); //etc.
  var w = new Window('dialog','test');
  w.p1= w.add("panel", undefined, undefined, {borderStyle:"black"});
  var x = new Array();
  var count =0;
  for(var z in featArray) {
      if(featArray[z][2] == 'texture') {
          w.p1.add('statictext',undefined,featArray[z][0]);
  w.p1.g = w.p1.add('group');
  w.p1.g.orientation = 'row';
  x[count] = w.p1.g.add('checkbox',undefined,'Save');
  count++;
  x[count] = w.p1.g.add('checkbox',undefined,'Strip');
  count++
      }
  }
  w.test = w.add('button',undefined,'Press to Test');
  w.add('button',undefined,'Cancel');
  w.test.onClick=function(){
  for(var w =0;w 
             
   
  		     
  How to outsource the JNDI name (dynamically set the JNDI name)
   
  			 Hello
  
  
  In the adapters such as ftp, database, must specify the jndi name. This binds the adapter to a particular jndi name. It's certainly better that connect the adapter directly to the physical resource, I was wondering if it is possible to have still more flexibililty-setting the jndi name dynamically.
  
  
  Basically my requirement is to develop a web service that reads a file from a FTP location. I know that I can outsource the file name and directory, but I wonder how to dynamically set the ftp location.
  
  
  http://Darwin-it.blogspot.com/2008/03/configuration-of-FTP-synchronous-get.html gives the answer if I want to set the host name, portname, user id and password.
  
  
  But I want to configure the adapter got FTP and then use this JNDI name in my service. Is this possible... I am using SOA 10.1.3.3
  
  
  Kind regards
  Amit			 
  I've sent.
  -Rigault.
  		   
   
              
             
   
  		     
  Recovery (Factory Reset)
   
  			 
  Hello
  I have a HP Probook 4730 s,
  I want to completely restore my laptop to factory settings and I have everything that I want to keep on backup.
  The only problem is the restoration.
  I have the recovery partition that has not been affected at all. The only thing that I have contacts in the partion section creates a new volume of the C: drive for music and then delete it later. It's her!
  I looked at some tutorials autour and found not all successful. When I go to press F11 I get an error in the Boot Manager. Error code (0xc0000225), many people said access to your recovery partition using the Recovery Manager program, but I don't seem to have that. Then they say you can press repeatively or hold F11 to get to the Recovery Manager, and then use the instructions on the screen to take me to the factory State.
  I do not have the Instalation CD and I have no more! (My bad)
  Any help would be great appriacted
  Chem
  			 
  When you created the extra partition, the hard disk may have been converted from basic to dynamic causing Recovery boot to fail. Check using disk management to see if your hard drive partitions are dynamic.
  You can start from a utility cd and use it to convert back to base. Download Partition WizardISO and ImgBurn to burn the iso image to cd with him. A guide on the use of ImgBurn to write an ISO on a disc is here.
  You can > Contact HP by telephone to order recovery Media.Choose your country, on the lookout for screen next to call HP and select the number under machines '' Business. ''
  Edit: Changed the link to an older version of PW which has still free dynamic to basic function.
  		   
   
              
             
   
  		     
  Pavilion g6-2165sx: * URGENT Please HELP * short hard drive DST has no error RU773W-68R81S-MFPX1G-60W803
   
  			 
  Hello my problem occurred as a result of the creation or modification of partitions to install ubuntu (for reasons of college) however I stupidly didn't check my disk was dynamic or basic and unfortunately it was dynamic, if after failing to install ubuntu windows 10 had an error in INACCESSEBLE_BOOT_DRIVE when I oppened the cmd troubleshooting and checked on diskpart did not exist but with a status unknown after dvd player I made the diagnosis and that he got a short DST has not... Is there a chance to correct the reader because im out of warranty and im in no condition to buy a new hard drive... Thanks in advance
  			 
  @Alin742
  Go to this site and create a bootable CD.
  http://hddguru.com/software/2005.10.02-MHDD/
  Boot from the CD.
  If she asks do you want SCSI, click No or just press ENTER. (countdown to 30 seconds)
  The port selection select your HARD drive. (Usually 1, 3 or 6).
  If you do not see your HARD drive, you will need to restart and go into the BIOS and SATA ATA value.
  After choosing your type of HARD drive, ERASE and press to enter. (This will erase all data).
  Leave it to erase the entire disc. (Depending on the size, it may take 2 to 5 hours.)
  Once done erase all disk F4 2 hit shots and will start the test.
  Many people simply replace the HARD drive and all that is wrong is there is simply soft errors. (Errors caused by software not hardware errors.)
  If you need help running the program let me know.
  REO
  		   
   
              
             
   
  		     
  Recovery Manager is telling abled
   
  			 
  I tried to restore my HP Pavilion to original factory but when you open the Recovery Manager; the system recovery box is disabled?
  The only thing I have ever done on the drive is partition into 2 parts to keep my staff separate files in OS system files. When you look at the Recovery Manager disks Windows drive is healthy and intact. If my additional partition is initially removing problem would make the system recovery? Also, is there a way to copy the file to a flash drive recovery? I noticed another small partition labled HP tools, do not know how to access.
  			 
  You need to remove the extra partition and convert to Basic.Converting back to the base can be done in two ways - either inside Windows, or by booting from a disk. The free version of Partition Wizard 4.2 to do this. Is not a later version because they have disabled the free verson function.
  http://www.SevenForums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
  		   
   
              
             
   
  		     
  Impossible to put the recovery disk and Boot/BCD error
   
  			 
  Hello
  I have several problems, I hope someone can help me.
  While on vacation 7/12, I bought a HP 2000 - 368WM NotebookWindows 7Home Prem 64.eu at the time of the purchase, I did a recovery disk.
  1. After returning, I partitioned the drive, forget the hidden partitions. The disc changed to Dynamic.I, then removed the new partition. OK no problem, start Windows and I have used laptop with no problems.
  2. this weekend I tried to go back to the factory install and meeting boot\bcd error: 0xc000225 when I F11. The other F1 and F9 options work.
  3.I tried to make recovery disks and there no 3 x 1 disk check. HP Recovery Manager - system recovery, restore your computer to the original factory State is disabled.
  What are my options now?
  I can start and use Windows normally.
  Under computer management, when I right click on the drive of Reactivare recovery disk is gray.
  Thanks in advance for your help.
  Miss N
  			 
  Hello cloud
  I still couldn't see your link, but I searched and found this, http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
  I used one, no option 3, and it worked like a charm. My drive is now in Basic system recovery option is returned in the HP Recovery Manager and I can boot into F11. So Bravo to you for motivating me to look for. Thank you. I did my recovery discs and all is well int universe. :-)
  Thank you
  Miss N
  P.S. No lost files, it took 2 minutes to do. I am very happy.
  		   
   
              
             
   
  		     
  Impossible to install secondary os
   
  			 
  I installed windows 7, I want to install windows 8 on the same drive, another drive, I have 30 GB unallocated space, I am unable to create this partition that requires the installation of secondary operating system. Please help me to create the primary partition of type required, dynamic, simple, basic etc. I tried to create the front partition, but after creating a volume simple secondary os can be installed on an empty dynamic score.
  			 
  Looks like that you converted your 'Base' for 'Dynamic' drive after installing Windows.  Your disk unallocated space must be contiguous if you want to even give it a try, quit frankly Windows installation on dynamic disks is a huge pain and you are going to have a hard time doing this on your converted drive, you can end up losing the entire dynamic disk and all your data if you try this on your current drive.  I suggest you to install a second hard drive in the computer if you have an available drive Bay and just install it on a basic MBR disk.
  John