E1705 Issues with Mic and Vista

Similar Questions

• issue with tables and clusters

  Hello

  Another issue with the tables and clusters. I have three engines thatI move on XYZ and then measure something. I need to draw on the 3D, the result of the measurement. How to draw real XYZ and not the index of the data table positions? (I can't actully how to build the matrices 2D forX, Y and Z). In the figures, I give an example of what I need.

  Concerning

  You have to break the data out of the cluster and to present them to the graph 3d to a separate bays for X, Y, Z and W where 'W' is your values measured at the locations described by X, Y, Z.

  This thread shows how trace readings in space 3. The following image shows the data that the original author wanted to draw.

  

  Have fun

  Ben

• Database update issue with JavaScript and local storage

  Hi all

  I come from a PHP background and a newbie with HTML5 and JavaScript, and local storage

  
  

  Currently I'm building a mobile web application that uses a remote database.

  I have a question about the update database.

  Currently, I set it up so that when the user logs on successfully - Local Storage fields are loaded from the remote database query using a jQuery.Get. This seems to work well.

  When it's time to update the data, I fill the form in local storage, allow the user edit fields, then:

  -a form post to send data to the remote php page that updates the database...

  Here is where I have a question: How can I make sure the edit went through good - what is better to do it now?

  -Can I set up a json response to say whether or not the update was successful

  or

  -Query the database once more and recover the fields to compare the edit results

  or

  -Another technique to do of course change it went through OK

  - then if successful, I can update the local storage

  Q: what is the best way to ensure that the database has been correctly updated (and also not lose time with Access database useless)?

  Is there a recommended for this?

  In addition, if possible this beginner can use a clear example...

  Why not to use jquery get () callback status where if the success is returned then to update local storage?

  best,

  Shocker

• Trying to Setup dual boot with XP and Vista, but Vista is stuck in a boot loop, error 0xc0000225

  Hello

  I have a Windows Vista Home Basic, and I wanted it to dualboot with XP.

  XP does not work very well, but when I want to start vista, its stucks after start the screen with the moving bar.

  When I try to start in safe mode it stucks when the drivers are loaded, and when I want to run the Startup Repair, it is said:

  Cannot start Windows

  0xC0000225 a required device is not connected or is not accessible

  I tried to run CHKDSK, but when I do its very long taking ~ 2 hours ~ but I have strength finsihed it completely yet. How long CHKDSK can take? And this can solve it?

  EDIT: CHKDSK has completed, but vista is still not start

  I have a Compaq Presario CQ60

  Thank you

  Original title: bootloop vista 0xc0000225

  Hello

  Method 1:
  Try to disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse and then start.

  
  Method 2:
  I also suggest that you do the startup repair using the Windows Vista installation disc and check if it works.
  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.
  a. Insert the installation disc.
  b. restart your computer.
  Click the Start button, click the arrow next to the button lock and then click on restart.
  c. If prompted, press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  d. choose your language settings, and then click Next.
  e. click on repair your computer.
  f. Select the operating system you want to repair, and then click Next.
  g. in the System Recovery Options menu, click Startup Repair
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
  
  Method 3:
  You can also follow the steps in the article knowledge base provided and check.
  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529
  Check out the links to learn more:
  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540
  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
  http://support.Microsoft.com/kb/927392

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".

  http://support.Microsoft.com/kb/927391

   

• Satellite A300-1ND - how to make a dual boot with XP and Vista?

  Hello
  I have just pursached a Satellite A300-1ND with Vista Home 32 pre installed.
  I intend to install XP SP2 as a dual operating system.

  Where should I start? What should I be wary and be careful?
  What bios update (XP update last 1.7)?

  Thanks, I appreciate all the help

  Before you try to install Windows XP to create a new partition.
  Then boot from the XP CD and install it. After that, you must restore the bootloader of Windows Vista using EasyBCD, for example.
  All that s!

  I found a solution here that might be useful for you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=155536

• Compatibility issues with CS2 and Windows 2000 XP? This is supposed to be THE OS ON CS2 FONCTIONNE_ it? Can anyone help - I really need my CS2 back! Thank you.

  Help! Years - SEVEN to be exact - I BOUGHT Adobe CS2 and widely used. Then, I was in an accident that took five years to recover from. After my recovery, I tried to return to the use of my Adobe products to see that Adobe is discouraging use of CS2 and because I HAVE a LICENSE and that was the LAST version, I used I wanted to start with a version that I know. Several months later, apparently I wasn't the only one who wanted to CONTINUE to USE CS2 and now Adobe has made it possible to download this version for PC and MAC, BUT because of operating system compatibility issues, Adobe continues to discourage the download and use. HERE's THE THING: I have the SAME SYSTEM running the SAME operating system as when I BOUGHT it first. I downloaded the SAME EXACT VERSION of CS2. He moved very well. But I can't OPEN the app and the Troubleshoot utility of the reports that there is "COMPATIBILITY ISSUES". WHY?!?!?!?!?

  I'm on a PC running Windows 2000, XP. I OWN a LICENSE for Adobe CS2 and it allows to launch on this same machine. I had to reformat my system two years ago, so it has much more space, but when I try to OPEN the application, it won't work. When I run the troubleshooter in Windows it indicates system compatibility problems? Can someone tell me what to try now? Thank you.

  Did you download and install the special version of CS2?  It's the only one, you will be able to use.

  Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• Compatibility issues with gwbasic and SBS 2011.

  I currently have SBS 2003 and upgrade to SBS 2011 and a new 64-bit server.  I'm running a gwbasic program and want to know if there will be problems on my workstations.  I don't think I'll be able to run the program locally on the new server.  We had a few speed issues for most in multiuser situations.   The problem seemed to have much worse at a time I made a few changes at the same time.  Multiple e-mail accounts to Exchange, Setup of email accommodation, added a Windows 7 machine, past all the other workstations to XP Pro (4) and did my back based gwbasic program update software.

  Hello

  I suggest you send the question in the TechNet forums and check if it helps:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/

  It will be useful.

• compatibility issues with WRT610N and WMP300N security mode

  Greetings from the experts out there. I have adsl AM300 + WRT610N pulled upward at home my receiving office on WMP300N wireless broadcasting (only 2.4 GHz wireless signal that I have disabled 5.0 GHz for troubleshooting). Get the best connection with the configuration below (WEP without authentication). I tested with WPA, WPA2, WEP with shared authentication. All these 3 combinations security mode does not allow my office to connect to my WRT610N router, which leads me to assume that there might be a problem with a pilot of the aircraft. The only link that almost succeeded was with WPA2 because I managed to get the LAN connected but not being is not able to connect to internet via AM300 so I have concluded that it is another problem too.

  AM300

  Software version: 1.19.04

  ===================================

  WRT610N-SG
  Firmware version: 1.00.00 B17
  ===================================
  Security mode: WEP
  Encryption: 104 / 128-bit (26hex)
  TX key: 1
  Authentication type: Auto

  WMP300N
  Driver version: 4.150.22.0 6/21/2007
  ===================================
  Security type: no authentication (Open)
  Encryption type: WEP
  Key index: 1

  (1) are you able to get a good market condition the Internet connection, using a computer that is connected to the WRT610N?

  (2) are you able to get a good market condition the Internet connection, using a computer which is connected wireless to the WRT610N, when no encryption is used?

  If the answer 1 and 2 is Yes, then:

  First of all, give your network a unique SSID. Do not use "linksys". If you use "linksys", you can try to connect the router to your neighbor. Also set 'SSID Broadcast' to 'active '. This will help your computer to find and lock on the signal from your router.

  In addition, in the computer, go to your wireless software and go to 'Favorite networks' (sometimes called 'Profiles'). There are probably a few listed networks. Remove any network called "linksys". Also remove any network that you don't recognize or that you no longer use.  Delete your current network (this will remove all old settings.)  Restart the computer.  Return to "Preferred networks" and re-enter your current info from the network (SSID, encryption (if any) and key (if any)). Select your current network and make your network by default, then set it to auto login. You may need to go to 'settings' to do this, or you may need to right click on your network and select 'Properties' or 'settings '.  Restart the computer.  The computer should automatically connect to your router (this may take up to 2 minutes).  If you're still having problems, temporarily disable your software firewall computer, then try again.

  Note: For WEP, enter 'key WEP 1' (found in the router) in your computer, not the WEP password or passphrase.

  If the above does not solve your problem, download and install the latest driver for your computer's wireless network adapter.

• Network printer with XP and Vista

  I initially installed my printer (Canon i850) on the XP computer, then I disconnected the USB cable and plugged into the Vista computer.  Vista has found a driver and it worked.  Then I put in network computers via ethernet and a router.  Now, I try to add the printer as a network printer on the XP computer, but he can't find a driver.  Computer that needs a new driver and what type?
  Is not the XP computer generate a print file using a XP compatible driver, send the file to the Vista machine, and it sends the file to the printer?  If that's true, he should be able to use the driver that is already on the XP machine.

  Extremely misleading terminology

  When you use the Add Printer Wizard you must select: "Local printer attached to this computer" even if the printer is connected to another computer.
  Only after that I tried this option has noticed the "(i) ' who says: to configure a network printer that is not attached to a print server, use the»»
  local printer option.  Indeed, he tells you to do two things in the face.

  I think that the Assistant must have been modified to only three choices: (1) Local printer, network (2) printer connected to another computer, (3) network printer attached to a print server.
  The underlying confusion is due to the double meaning of the term "network printer".

  My problem is now solved, but not through Microsoft or you guys.

• Issue with radiator and fan when the upgrade of processor CPU

  I have an eMachines EL1200-07w. Current processor is AMD Athlon 2650e. I will go to AMD Athlon X 2 4850e, or AMD Athlon X 2 5050e. And I wondered if it came with a heater or fan, could I use my current or should I get a new radiator and fan?

  Upgrading processor CPU. I wondered about the radiator and fan.

  I consider getting a larger fan and heatsink because of the magnitude of
  making level, and before that I decided that it to be I would make sure the current
  is not "glued" to the CPU - if that makes your choice very easy; you do
  need a new. :-)
   
  "- RyanK -" wrote in message
  News: * e-mail address is removed from the privacy... *
  I have an eMachines EL1200-07w. Current processor is AMD Athlon 2650e. I am
  will upgrade to AMD Athlon X 2 4850e, or AMD Athlon X 2 5050e. And I was
  I wondered if it came with a heater or fan, could I use my current
  or should I get a new radiator and fan?
   
   

• Issue with withdrawal and filling (Photoshop)

  Hello everyone, I have a question to which I have not found a solution on the web.

  So I basically would like to have the points removed and filled the nightsky on the image. I want only the fog/clouds with the nightsky (without areas of the market).

  Is there any tool I can use? Can any show or explain how I can do? Thank you in advance to anyone who takes his time to help me.

  

  

  Fooled the layer where you want to make a few final alterations.

  Use the Lasso tool to make a selection of the areas to remove

  Edit > fill > Content Aware

  Use the patch tool to equalize the average blue zone

• Issues with paragraph and CSS styles and models module Styles

  I am having difficulties with a text style in my templates module in British Colombia (especially the blog). The drop-down list in the Editor's paragraph style does not reflect the H1, H2, etc. that has been downloaded to the site at its inception in Muse. And I don't have the ability to use CSS styles.  What gives?

  How can I change the paragraph styles to match the downloaded versions that CSS is not available?

  http://sweetsandtreatsboutique.2121customcontact.com/index.html

  It may be somewhere in the Site Global stylesheet. My boss, who created it in Muse, labeled H1, etc. like the following...

  . H1-GaramondB-40-151

  {

  color: #543426;

  Police-family: Garamond, Hoefler Text, Palatino Linotype, Palatino, serif;

  font size: 35px;.

  make-weight: bold;

  line-height: 1;

  left margin: 0px;

  margin-right: 0px;

  padding-bottom: 0px;

  padding-top: 0px;

  }

  As a result, BC is not recognize this policy because of the name? I tried to delete the text after the .h1 and the paragraph style has not changed.

  -Chuck

  Hi Chuck,

  Your CSS code target the elements with the class ".h1-GaramondB-40-151", but this blog page your elments of a H2 does not have this category against them, that's why you need to replace the class name with the h2, as this element:

  H2 {}

  color: #543426;

  Police-family: Garamond, Hoefler Text, Palatino Linotype, Palatino, serif;

  font size: 35px;.

  make-weight: bold;

  line-height: 1;

  left margin: 0px;

  margin-right: 0px;

  padding-bottom: 0px;

  padding-top: 0px;

  }

  I hope that makes sense. If you are looking for something like 'target the elements on the page with CSS' you will see what I mean.

  See you soon,.

  Mario

• Security issues with Win7 and CS4

  In CS4, when I try to save a file to which I made a change, I get the message:

  «Cannot save N...» (title) because the file is locked. "Use the Properties command in Windows Explorer to open the file"

  Really? I have a few tens of thousands of files that, if I want to add a layer and save it, I must return to the bridge, look in Solution Explorer, click Properties, and change "All Users" for total control.

  It's obscene!

  When I'm here, "Everyone" is put in evidence and the fact that the permissions read and read/execute, on the Security tab. The file is not locked so I know the area 'Read' is empty. I can change the permissions, but it's good for only that one file and when you look at the security settings in the world, "Everyone" is not listed.

  I need to find a global way around that, and I'm not. I am logged on as administrator, and I know that there is another layer of admin. Can only be invoked in the world and how? Is this the right way or is there another? Is it a Photoshop problem or a problem with the OS?

  Thank you!

  The owner must be administrators and your username must be a member of this group if you want to change the files. The Everyone group has very limited rights.

  And you must look under the safety not only of Security/Advanced/owner.

• Critical issue with CF8 and PDF creation!

  I have an application which most simply described, makes a loop on a table and generates reports as a pdf for each record.
  It works perfectly CF7.
  
  Call model contains:
  
  < cfloop index 'i' = from = "1" = "3" >
  < cfset fname = ' candidates/a_' #i # & '.pdf' >
  < cfinclude template = "rpt_pdf_core.cfm" >
  < / cfloop >
  
  
  The model called whenever the loop is "rpt_pdf_core.cfm" and contains the following (reduced to it's easier to duplicate the eror) when it is called the 2nd time:
  
  < cfdocument filename = "" #fname # "overwrite ="Yes"format ="pdf"margintop = marginbottom".5"=".25"marginleft marginright =".5"=".25">"
  < cfdocumentitem type = "header" >
  header stuff
  < / cfdocumentitem >
  < cfdocumentsection >
  stuff body
  < / cfdocumentsection >
  < / cfdocument >
  
  Now, when you run the page evel albums with the loop in CF8, it produces the error:
  
  Routines cannot be declared more than once.
  The _cffunccfdocumentitem_cfrpt_pdf_core2ecfm7061229361 routine has been declared twice in different models.
  
  ColdFusion cannot determine the model line that caused this error. This is often due to an error in the exception handling subsystem.
  
  I understand that functions cannot be called more than once in a code block, but these are tags, not functions.
  
  It is absolutely essential for the application continues to work!
  
  Please, everyone, is this a bug? Is - fixable?

  It looks like the problem reported by sp4mm4gn3t on 07/12/2007 in the Labs forum. According to Rupesh Kumar, in his reply, this has been one, but in the last beta public version had to be fixed before the final release... but he has bitten us hard here as well (on the full).

  If you find a fix or a workaround, please report it here.

• Performance issues with mmr_play() and mmr_stop()

  Hello

  I am currently working on a game for the platform BB10 and implementing audio. I use the multimedia rendering engine to play a piece of background music in the game, which works fine. My problem is when you try to switch to a music different track run game - which produces a short (but noticeable) stall.

  A little more information - my approach is currently single-threaded (I realize that a possible solution is to implement the audio on a separate thread), and when I start a new track I'll simply call mmr_input_attach(), then mmr_play(), which are so expensive that they stall the game.

  As I say, I know that a solution would be to switch the audio to another thread, but I was wondering if anyone knew another solution at all? I tried to play the tracks in a playlist and use mmr_seek to move between them, but I still get the same stall. Unfortunately, I was not able to find a lot of information about the inner workings of mmr_play() or mmr_input_attach() or find several forum posts about them, it was difficult to work on what would be my options.

  Thanks in advance for any help!

  For what it's worth, I managed to get a solution threaded work easily enough, roughly as follows:

  void* playMusicOnThread(void* args)
  {
      if(mmr_input_attach(musicContext, musicURL(), "autolist")==0)
      {
          // Successful attach, play file
          mmr_play(musicContext());
      }
      else
      {
          // Handle error
      }
      return 0;
  }
  
  void MyClass::playMusic(void)
  {
      pthread_t pt;
      pthread_attr_t attr;
      pthread_attr_init(&attr);
      pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED);
      pthread_create(&pt, &attr, &playMusicOnThread, NULL);
      return;
  }
  

  I was still interested if anyone knows how to run single-threaded, but this solution is sufficient for my needs anyway.