E330 beeps two times before going to sleep and not sleeping actually

Similar Questions

• I was working on a project for several hours, the next day I was back to square one... I'm really sure I saved the project before going to sleep

  I was working on a project for several hours, the next day I was back to square one... I'm really sure I saved the project before going to sleep. And says that he has changed before that I did all the big job on it. It's really frustrating... Altogether I worked on this project for about a week now. Is it possible to recover my progress in return?

  If the file is missing or has not been saved and you don't have auto-save and increment is enabled in the preferences then you are out of luck. I have auto save set for 10 minutes and 5 versions. I suggest you do something similar.

• When I download firefox and bring it up it flashes 5 or 6 times before going to the home page

  get a file off several times to go to other locations on my desk, for example, my photo file. When I try to put firefox back up it flashes 5, 6, or even 7 times before moving my home page. It is of is there, but it is annoying and should not happen.

  even if I do an output file I had too many things open. a friend fixed it for me. Thanks anyway.

• Can't cut machine. Need to order two times before it turns off.

  I have this seen in the responses about three days ago and now can't find it.  But I can't stop the machine!  The first attempt results in some process to stop.  So I order the closure again.

  Also, if I try to reboot the machine, the same thing happens in which he has to be ranked in twice.  However, when it restarts, it seems to go into hibernation: black screen and will not respond to what it is.

  Also, when I try to highlight something, it takes several attempts because he jumps constantly portions of what I'm trying to highlight.

  When I found it earlier, the issue was published exactly as I entered it here and in one of the responses, there is a recommended sequence to test the system.  I need this sequence.

  The problem is actually due to the addition of a SeagateFreeAgent GoFlex external drive with the Memeo instant backup software that has been identified in the test sequence that I mentioned above.

  I need this test sequence to give Seagate/Memeo to prove that the problem is associated with their software/hardware.

  Hi GLRaehn,

  Follow the steps in the article.

  Advanced Troubleshooting for shutdown problems in Windows XP

• Why can I not play game spark gap of bubble for more than 5 minutes at a time before the cursor freezes and I can play is no longer?

  Have you tried to restart, clean disk, defrag.no help.

  Hi Lew50,

  Welcome to the Microsoft Answers Community Forum site!

  Please provide additional information to resolve your issue.

  1. What is the operating system that you are using?
  2. Was there any recent changes/updates / drivers installed on your computer?
  3. You have installed this game on your computer or you try to play online?

  If it's a game online, offers to optimize the internet Explorer by following the instructions mentioned in the article.

  http://support.Microsoft.com/kb/936213/

  Suggest you temporarily disable all security software and check if it helps you play game.

  There are chances that Bubble Popper is perhaps not compatible with the operating system you are using. Invite you to check if the game you are playing is compatible or not.

  To check the compatibility of Windows Vista, I suggest you visit the below mentioned link.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  To check compatibility in Windows 7, I suggest you visit the below mentioned link.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  If your game is compatible and you are always faced with the question, suggest you to visit the community Bubble Popper and look for the question.

  http://www.igarchive.com/Forum/?GID=9889&game=bubble+Popper

  I hope this helps solve your problem!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Is ' InstallSecurityCentral_787.exe really a file Mozilla or a Trojan or a virus carrier. He jumped two times while using Firefox stating I have viruses, but Comodo not agree!

  A window that is supposed to be a "Firefox security alert" jumped two times what opening of websites (not the same site each time) indicating that I have viruses by performing an analysis indicating there are 98 virus but list only 9 and indicating that I need to download a program called http:// swocmod InstallSecurityCentral_787.exe. it. Mrs.

  I am suspicious that it is a ploy to make me load a horse of Trojan or a virus and she would appreciate advice on the subject.

  I ran a test of the Comodo virus on the file and it came clean but it's a link charger and not the actual program is not surprising.

  A Comodo sweep on Friday, may 6, 2011 did not find the files listed by the alert?

  Cordially astralcc

  Edited to disable the link - Maurane

  It's not Mozilla, it will be malware, do not install it.

  There are many sites that will present you a security alert dummy trying to install the software. The real security alert Firefox you just warn you on a malicious site, it does not perform a scan or you notify that you have installed viruses and will tell you not to download any software.

• How to add two time values in oracle

  Hi, I have two time as parameters: pSTTIME and: pETTIME is defined as a VARCHAR2 column type
  
  I have values for: pSTTIME as 09:00 and: like 15:30 pETTIME
  
  How to add these two times, I tried with TO_TIMESTAMP and TO_CHAR, I tried also with SUM but he failed in all situations
  
  can anyone help

  Hello

  TO_NUMBER allows to convert numbers that you can add these channels.
  Use TO_CHAR convert that number into a string.

  In PL/SQL:

  minutes := ( ( TO_NUMBER (SUBSTR (:psttime, 1, 2))
            + TO_NUMBER (SUBSTR (:pettime, 1, 2))
            )
          * 60
          ) + TO_NUMBER (SUBSTR (:psttime, 4, 2)
            + TO_NUMBER (SUBSTR (:pettime, 4, 2);
  str := TO_CHAR (TRUNC (minutes / 60))
      || ':'
      || TO_CHAR ( MOD (minutes, 60)
                     , 'fm00'
              );
  

  In SQL, calculate the NUMBER minutes in a subquery, so you can use the alias in a Super application.

  This assumes that: psttime and: pettime are always well trained: 2 digits for the hours, a colon, then 2 digits for the minutes. If you are unsure of the number of digits, the same basic app will work, but the SUBSTRs will be a little more complicated.

  I hope that answers your question.
  If this isn't the case, after a complete test script that people can run to recreate the problem and test their ideas. Include the VARIABLE, CREATE TABLE, INSERT, or any statement is necessary to provide some examples of data and also after the output you want from this sample data.

• How to change the time before my computer goes to sleep when I type?

  Help

  Hello

  See the guide below on setting the time "Sleep".

  http://thecustomizewindows.com/2011/01/change-the-time-before-your-PC-goes-to-standby-in-Windows-7/

  You may also need to adjust the time before the screen saver of the cuts - if you do, see the following topics.

  Open windows control panel, open personalization, click on the link of the screensaver on the bottom right and in the next window, adjust the time of "Wait" to a more acceptable figure – also, if you don't want to log-in after the screensaver, Remove the tick from the box "in»the logon screen curriculum vitae  Click on apply, then Ok to save the settings.

  Kind regards

  DP - K

• IM see: empty in my address bar for a second or two before going to a web page, it does not occur every time so I don't know what to think about this, is this a virus?

  Subject: Blank appear sometimes for a few seconds in the address bar, scanned computer with Zone Alarm Anti Virus - Spy Bot - Super Anti Spyware all found nothing. Sometimes the browser hesitates for 5-10 seconds before going to a page, I wonder if its related to the About: Blank

  It's probably nothing to worry about. Is that a name firefox uses blank pages.

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• HP pavilion slimline s3110.uk, no vga input signal, monitor going to sleep, beeps

  Please help I don't know anything about the operation of computers, I went yesterday and the tower is a beeep then a beeeeeeeeeeeep on several occasions and anoyingly, there is also no screen on the monitor only a short display telling me there is no signal input vga monitor goes to sleep I tested the monitor with the turn of my brothers and it works very well, so now, I have no idea what if what to do next, as I can't reach the same splash screen I can't do some tests of material, there is only 24 hours and it kills me! I need internet back im lost without, plllllllllllllllleeeeease anyone have any ideas before go me crazy!

  Hi, what you want to do first is remove the (memory) ram sticks and put back them in. Re-allocation of places your RAM sticks can solve your problem. If you also have a video pci-express agp/pci/or card so you can re seat which as well.

  The RAM sticks are borads green circuit that chips on them in sizes of 3-inch 1 in. (approximately). They are kept in that they place in the motherboard by white tabs on both sides.

  Try these steps below after reading and see the diagram with the photos on page 7 to 9 from the link below.

  http://h10032.www1.HP.com/CTG/manual/c00877796.PDF

  (1) unplug the power cable from the back of the pc, unscrew the screws at the back of the large pc Tower and then remove the side panel (the side of the pc stands out).

  (2) then put the pc on the side, with the open side facing upwards so you can look down in and locate the locations of memory. Don't forget to look for the white tabs holding them places.

  (3) once find you them, they are usually 1, 2, or 4 sticks them to total, to make the next step to each stick, one at a time.

  First, push the white paws holding a stick of ram and the ram stick will pop out and you can pull it up towards you. Then everything just put back, push down (not too hard, careful not to damage it or the Board of Directors) and then the white tabs will click in each side. Make sure that you put the lever of ram you out in the same way, don't flit it that it will in a sense.

  (4) after that for all the RAM sticks, check inside the computer to make sure the cables are not loose and connected as they should be and then replace the side panel and the screw and turn on the pc and see what happens.

  Here is a guide on how to locate the RAM sticks. I hope this helps.

• What can I do if the TV turns on and goes into sleep mode? Standby blinks 9 times

  Model KDL-46xbr2 power button press that TV is available on any photo goes into sleep mode which flashes 9 times stops and continues to blink 9 times

  Where is the help people?

• My computer goes to sleep/hibernate in 3 min. when not used, how can I change the interval of time until this mode?

  How to set the time it takes for my computer access mode standby, when I do not use it? Thank you.

  Hi ILUVHAWAII,

  Welcome to Microsoft Answers Forums.

  By default, your computer goes to sleep after a short period of inactivity to save power. To keep the computer awake longer, increase the sleep after setting.

  To keep your computer awake longer

  1. open power Options by clicking the Start button, click Control Panel, clicking System and Maintenance, and then clicking power Options .
  2. in the left pane, click change when the computer sleeps.
  3. in the change for the plan of the parameters in the page computer standby list, click the amount of time slot on battery or AC (or both) and then click Save changes.

  Turn off a computer: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions

  Solve power problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Every time when my comp. goes to sleep, wake up I have to sign in. How can I remove the extra sign in?

  Every time when my comp. goes to sleep, wake up I have to sign in.  How can I remove the extra sign in?

  David,

  See my reply in the thread How to unlock a user on my computer?

• Every time I close my laptop and he goes to sleep, when I reopen it the lid it restarts and I get the following error.

  Hello

  Every time I close my laptop and he goes to sleep, when I reopen it the lid it restarts and I get the following error. Can you please help? Thank you!!!

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 9f
  BCP1: 0000000000000003
  BCP2: FFFFFA8004AC8A10
  BCP3: FFFFF80004053518
  BCP4: FFFFFA8009274DC0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\WINDOWS\Minidump\092812-30045-01.dmp
  C:\Users\Kevins\AppData\Local\Temp\WER-78078-0.SysData.XML

  The minidump files showed a DRIVER_POWER_STATE_FAILURE (9f) persistent stop error that seems to be caused by the Netwsw00.sys:

  BUCKET_ID: X64_0x9F_3_Netwsw00_IMAGE_pci.sys

  The Netwsw00.sys, which is dated March 12, 2012 is a driver for Intel wireless network adapter.

  Even if it's a fairly recent version of the driver I would suggest trying the following update utility from Intel and of whether there is a newer version available and, if so, install the:

  http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu