E5550 - problem post-OSD SCCM

Similar Questions

• Problem posting photos on Facebook Pages.  Help!

  Everyone knows a problem posting photos on Facebook Pages?  I do so on a daily basis for a few years now.  Yesterday, I was unable to post on a Facebook Page (non-personal accounts).

  Now, when I try to create a Collection published to Facebook, I have more to select an existing Album to Facebook Page.

  If something has changed?  Thank you very much in advance for your comments!

  Paul,

  Midlothian, WILL

  Yes, someone fixed something. Facebook?  I can post BACK to the pages that I managed!
  Everyone please see if it works for you!

• memory day problems post 10.11.6?

  In the last days, safari has been giving me the BBOD, and crashing several times a day. Less critical (but hey, it's a holiday weekend) lies in the fact that I can't play the games (minecraft) because the application continues to run out of memory, despite the fact that I have 32 GB of ram. There is a process of kernel running at the level of the root that starts normally, but then the spikes to use all available memory (less than 2 GB to 18 GB - Yes gigabytes is - and all applications must be suspended at this time).

  Does anyone else have problems of memory after this last update? I don't think it's a coincidence that safari, memory and kernel of processes are involved in updates and my problems, but I am not an expert. Anyone have any ideas?

  I'm running an i - mac 2013 with 3.5 GHz intel core i7:

  

  

  AnneMarie

  < re-titled by host >

  Please download and install EtreCheck from http://etrecheck.com/

  Run it and post the report here.

• Wireless problem Post Infection - Windows has encountered a critical error and close in one minute.

  Hello

  I recently had my computer infected by the virus of the Ant-malware Doctor and I believe that it has been completely removed now. However, I think that one of its components attached to a driver of key computer or something and when I removed it I accidentally deleted this essential engine with it. So I can not access the internet for more than a minute. If I turn on the wireless, I connect but immediately the computer says: 'Windows has encountered a critical error and ends in a minute' and 'Service and controller app has stopped working and was closed ". I checked also further in my error reports and think that it may also have something to with THE COUNTER Service? It is difficult to correct the situation when I can't access internet from my computer, but I can use another computer and transfer the files needed to repair the damage. Also I have a product Id, but as Im not using my own computer (to which the Id is attached), I can't access to professional advice. But if someone here can help I would be very grateful. IM thinking of uninstalling Service Packs and reinstall them but I'm not a computer expert. Thank you in advance.

  Updated after you have everything installed Norton Internet Security on my laptop the scans detected some trojan infectios and I'm checking for more information and to remove all the. Also, when I've updated my Norton Internet updates no warning sign came on a mistake criticism or service and controller app. It seems that viruses are to blame for the problem and despite the using various anti-virus software and scan many times before Norton virus remained unchanged. It's possible lack of virus definitions updated authorized to do this as the internet connection difficulties made difficult to download updates lasted. Thank you, and if the problem doesn't go away, I'll re-post say.

• laptop HP envy 15 ts: touchpad by clicking Update problems post windows 10

  Since update to windows 10 my touchpad not working properly. Whenever I have try and click anywhere on the touchpad, it works as if I clicked the middle mouse button. I can't highlight text or right-click on things on the Web pages, it appears the scroll icon. Tapping can still select things as usual. Thanks in advance.

  clockwiseduck

  Thanks for posting the full name of the system

  install the new HP Support Assistantyou of new drivers and bios for install

• Bizzare vShield Edge-NAT/VPN problem Post - 5.1 upgrade

  Hoping someone can shed some light on this issue for us - the TLDR is that NAT rules seem to be causing unexpected behavior on the VPN traffic after a vCloud 1.5 to 5.1 upgrade.

  Background: We work with a hosting provider to manage our vCloud environment. Quite simple - 2 ESXi hosts, a few NFS data stores. They have recently updated us of 1.5 and 5.1. For most of our committees, we have just one network of vSE/Routed that connects a subnet to a network of "WAN" and pulls a public IP address from a pool. Send us (NAT network address) and leave (firewall) ports (for example port 3389 for RDP) to the virtual machines selected. Most of these networks also have a VPN tunnel from site to site with a physical Firewall through the internet. After the upgrade, we went and converted our rules to match the period of initial and active INVESTIGATION "multiple interfaces" - effectively subtracts to compatibility mode. Everything was going well (even for devices of vSE always in compatibility mode)

  Question: We first noticed this, when a customer reported that they are unable to access a virtual machine via RDP using it is internal (protected VSE) IP through a VPN tunnel but could access the virtual machine via RDP using its public hostname/IP address. Allow us all traffic between the VPN (firewall has a whole: a rule for VPN traffic). When we connected to troubleshoot (just thinking that the VPN was down), we found that we could connect to any port on the computer through the VPN tunnel except 3389remote virtual. I can ping from the local subnet to the VM troubled on the VAPP network without problem. I was able to connect to other ports that have been opened on the remote virtual machine without problem. I couldn't connect to 3389 through the VPN.

  We thought he could be isolated, but found the question on each VSE we have: If there were a the DNAT rule to translate the inbound for a particular port, this port would be insensitive when traffic through the VPN tunnel that is meant to be the target of the DNAT rule.

  Someone has an idea what could be the cause?

  Looks like it is a problem experienced during the upgrade. These hidden firewall rules will not disappear until the firewall configuration is updated in some way. So go as - upgrade

  (1) upgrade VCD

  (2) update VSM

  (3) to redeploy the entry door to upgrade the edge of the gateway to version 5.1

  (4) convert the firewall rules to the new format (where firewall rules have no management interface or traffic)

  (5) to change the properties of the bridge and the multiple interface mode

  (6) change the specification of the firewall somehow, that is to add a dummy firewall and remove it, turn off, then turn on the firewall, etc..

  Which should cause the deny rule go away

• I can't post comments on YouTube with Firefox more, but can be downloaded on IE. Problem intermittent, some videos that I can post to.

  The comment box is gray on videos a lot, but not all. The problem is only on FireFox; I go to the same videos on IE and don't have no problem posting comments. I have Windows 7 Edition home premium service pack 1 64-bit. The problem is new, working fine until a few days ago. I refreshed Firefox to default settings, been through the menus help Youtube and help Firefox.

  Thank you, clear your cookies for YouTube did the job.

• All my posts have disappeared from the Inbox.

  I realized there is a similar problem posted, but proposed solutions don't work here and the details here are different.

  All messages have disappeared from the Inbox. The sent box is fine, but deleted from the Inbox messages do not appear in the Recycle Bin.

  A search of the Inbox for messages of size > 0 allows me to see the messages and respond to them.
  If I move a message to another folder the moved message is invisible but believes it is search.

  Deleted messages are in the trash folder, but is not visible. A search in the trash finds them.

  Messages in the search boxes reuse (response, delete), but try to delete a selected message in the search box list has no effect.

  I found a solution. I can't take credit, but I tell you that I was almost embarrassed the simplicity of the solution and the problem.
  AT & T ConnectTech technician admitted that when I could left click and select the message in a tab, it was probable that nothing was clicked in the "select to display columns" in the top right of the CT. He clicks on a selection of articles and automatically that my messages appeared.

• MSN video problem after updating iOS 9.3.1

  4th GEN IPad plays only sound with videos in MSN after upgrade to iOS 9.2.1. No problem with videos from other sources. I have seen this problem posted on other tech sites, but nothing comes up on any other site of Apple. In addition, no solution is displayed in this very recent problem 2016. Any help would be grateful. No other changes have been made to the parameters of the ipad.

  Try another browser - there seems to be extensions or other problem between MSN and Safari

• Problem Pairing device: Bluetooth virtual keyboard (VKB) detection of service failed

  Hi, I could use help to determine the cause and the solution to a problem I have. I want to associate this with my Toshiba Tecra M4-S435 keyboard. The laptop has an internal module installed, "Cambridge Silicon Radio, LMP (V: S) 02:0490." I installed the last 5.10.01 (T) BT stack. I have several other paired devices, but this one is the original questions.

  The unit is in the discovery as a keyboard VKB (it supports HID and SPP); I want to use the HID profile. In the authentication dialog, the VKB beeps, who is his warning that a PIN can be typed into the unit, but to hit the enter key, a dialog box informs me that "Detection of Service Failed". I've seen similar problems posted on the manufacturer's website, but I have not seen any resolution.

  Any help is greatly appreciated.

  Hello

  I m not an expert from BT, but if you have several other devices with your laptop coupled, then everything is ok with your Tecra M4 BT stack and the machine.
  It seems that there is a compatibility problem with your external virtual Bluetooth keyboard.

  Either the Toshiba BT stack does not support this VBK and service or the firmware of this device allows a few worries
  However, in case I would recommend contacting manufacturing virtual Bluetooth keyboard for more details.
  Guys should more known on own products as simple Toshiba here users in the forum.

  Good luck

• Satellite P300-h-13 - DVD burning problem

  Hello foks,.

  First of all, I'm from Holland and my English is not so good, sorry about that.

  I had my problem posted on http://laptopforums.toshiba.com/t5/General-Technology/bd-p/brd_gen and they lead me to him. So I hope that someone here has a solution to train me.
  The form of answers it will not work.

  The form of DVD playback going perfect, but burning no longer works after the first time I burned a DVD with success.

  Hmm seems strange
  Have you tried to delete upper and lower filters in the registry?
  If this is not the case, to do this:
  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the computer and check if you can write to DVD

• Vista update problem

  Salvation responses/Microsoft technical support.

  I may have the same question - I am running Windows Vista Ultimate 32 Bit and have never had a problem with since the launch in 2007.

  Execution of Windows updates last night my PC will not boot Windows, it goes beyond the BIOS, but then when the "Loading Windows" little status bar appears after 2-3 seconds, he made a break then it 'blue screens' very quickly that I can't read what whether it was and then going to restart my PC.

  It does and now reboot - loop continuously, so I can't get Vista started. I inserted my Windows Vista DVD to start and I can "Repair Windows" - this can get my going again (which is what I did twice now & nhow I typing this).

  But these same 9 new Windows updates are causing the problem on & on new - please help me fix this.

  Updates of Windows (which came out yesterday, 02/10/2010) that cause this problem for me are:

  A security update cumulative for the stop bits ActiveX for Windows Vista (KB978262)
  Update security for Windows Vista (KB971468)
  Update security for Windows Vista (KB974145)
  Update security for Windows Vista (KB975560)
  Update security for Windows Vista (KB977165)
  Update security for Windows Vista (KB978251)
  Update for Windows Mail Junk e-mail filter [February 2010] (KB905866)
  Windows Malicious Software Removal Tool - February 2010 (KB890830)
  Update for the junk e-mail in Outlook 2007 (KB977719) filter

  Please tell us a solution, because I want to keep my PC & Windows up-to-date and at the present time, I too scared to run Windows updates (I disabled the auto updates) because its causing Windows to not start & continuously restart the PC.

  Greetings-

  Michael H

  Michael H.,.
  First of all, you should check that your system is not infected with any type of virus\malware.  This thread has some good information on the programs and use if you don't currently have one. Get rid of malware  If you do not have an anti-virus, you have and is up to date?
  You must install the updates one at a time and restart after each one to determine what is a problem.  Once you have determined the update that has a problem, post with this information.  Also let us know which service pack level that you are running.
  Make sure all your equipment is updated with drivers.    Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with services of automatic startup after Windows Update problem

  These are probably related to many things I tried trying to solve the problem of Windows Update - until I found the answer to Fix It.  That fixed my Windows Update, but now I have these problems.

  I tried to run the bat file that Sohail suggested in this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/41f1d01e-e787-479b-83de-c66f40a23a37/
  He ran with errors, so I suspect he undid some things and then they don't get put back.

  Those that I know I need is:
  Windows Audio
  DHCP client

  These two begin very well once the system is in place, but I have to do it manually.  They still claim to be automatic when I view in the Services management tool.

  I also noticed that the following services are set to automatic but have not started either.  Is this a problem?
  Task Scheduler
  TCP/IP Net BIOS Helper
  Windows event log
  TPM Base Services

  So, how do you restart automatically?

  Problem posted in another thread to improved Performance.  Long story short - a repair settled with Vista DVD.   He fixed the problem of services, but the problem of Windows Update is back.

• Problems reinstalling XP Media Edition any help would be GREATLY appreciated

  I'm trying to restore my operating system, Windows XP Media Edition 2004/2005 in replacement of the operating system now it is just too much for me (OS UBUNTU) but I can't get the CD to play. I can insert them, it appears on the screen that it tries to install but this is as far as we get it PLEASE HELP! I need my Windows XP back! This never happens to a point that I would get on my knees and pray for your mercy, if I thought that it would be useful... If I had the money to pay for technical assistance, I would then be in a heartbeat, but my funds are very limited, my level of satisfaction would be out of this world!

  Thanks, Bruce

  In 1985, I was in a motorcycle accident and is is broken two bones in my body, my C4 and C5 vertebrates. The accident left me paralyzed from the midchest area but fairly complete wisdom from the same region upward. I learned quickly that you will have more life if you pour as much as you have in it and never say I can't do it, or you can find yourself leading a very negative life. Smile because there is always someone who has a lot less well off do you life! http://brucewalz.com/ http://windstarsc.com/

  Insert your CD, cancel all the pages that open and restart, press F12, this will take you to the Boot Menu, select your CD-ROM drive using the arrows and press ENTER. Follow the instructions! You must delete the data from the hard drive and reformat it to NTFS. No problem, Post back!

• Playlists to the poster?

  I tried to use this tutorial to update the playlists on my opinion, but it does not work. On the one hand, I don't have WMP 10, I have 11 and for two people, the photos are not available, so I don't see how I'm supposed to create for my playlist.

  So, I ask you what kind of method you use guys make playlists on your point of view? This is something that I need and use music to go Playlist is not sectioned. I use WMP 11 and the Format Factory to get music and videos on my opinion, if that makes a difference.

  http://forums.SanDisk.com/Sansa/board/message?board.ID=announcements&thread.ID=115

  I use Media Monkey.  Who works and has a free version.  This is the solution for the problems posted here.