Edge Animate - hide video when finished

Similar Questions

• Adobe Edge animate event handler when the video starts to play

  Now I use

  document.getElementById('myVideo2').addEventListener (myHandler, 'ended', false);

  If I want to add a new event after a video was played.

  How can I check when a video actually started playing and see you on the screen? I need this because I want to add some additional animations around the video that must be triggered exactly with the first images from the video.

  I found the solution:

  Video.onplaying = function() {}

  Console.log ("video is now loaded and play");

  }

• Adobe Edge animate CC crashes when you use large SVG images

  Hello!

  When I import SVG files to animate edge it freezes and I can't do anything with it.

  I tried to import a single file at a time and it worked fine, but when I save the project and close the program and then open my project dashboard animate everything crashes again.

  Also I tried to import pictures very small (100px x 100px) and adjust their size, I need and him causing app crash too.

  I use Mac OS X 10.9.4

  I found already because of this problem.

  When you import the SVG to animate edge it gives your SVG width and height 10 times more original then size the image and the transformation: scale (0.1). So when you import images SVG 5 500 x 500 Adobe Edge makes 5000 x 5000.

  This is the app cause Frost and bad SVG display in browsers.

  Always change of scale (0.1) to scale (1) and reduce the size of 5000px to 500px for example.

  Best regards

  Alexey Prilovski.

• How can I get video mp4 for playing the edge animate .oam on page Muse?

  Ok.  I'm pulling my hair out here...

  I am just placing a file of .oam edge animate with video on a page of Muse. The .oam contains a simple icon (that grows and shrinks slightly in a loop to draw attention) that, when clicked (event "on click") made a video .mp4 appear and start playing. Then the video disappears at the end, leaving the new icon (no controls - it just plays and goes when it's done).

  The animation/video playback works fine in edge animate and animate preview of edge browser but when I place the .oam file in my page of muse, the video does not play. I tried the same file without the event 'on click' where the video plays essentially on its own after a second aboard animate and edge Preview in the browser and even once, it does not read in Muse.

  It's embarrassing and I don't know how to solve the problem.

  Does anyone have any suggestions? My .oam file contains a .mp4 file a.webm file, although this will be part of a stand-alone Museum Kiosk and therefore does not need compatibility .webm.

  I'd appreciate any suggestions really.

  I thank very you much in advance!

  Mason

  HA!

  Doggone it! Somehow, I knew that it would work very well for someone else. This seems to be how these things go, isn't it? Exciting video, huh?

  In any case, I use Safari. I tried the image displayed in preview in the preview of the Muse and then tried in "Preview in browser" and it did not work for me. I just downloaded Chrome and will try to image previewed in there. Perhaps that will work.

  Holy crap!  I literally just released the entire HTML for the site of the Muse and opened it in Safari from there and it worked like a champ!  A problem with the perhaps "Preview in browser"?

  Well, color me happy! Perplexed but happy!

• Install Application Manager does not recognize edge animate

  I opened my Application Manager on every other day or so to check and make sure I have no shortage of updates. However, I noticed the other day Edge animate had resumed the link install rather than the text.

  The program was still installed on my computer, but I have advanced and clicked on install and let him go to his process. On the Application of the closure and reopening Manager he returned again to install.

  So I opened my applications and did an uninstall of edge animate (removal of prefrences and everything) and then through the process once more.

  Yet the Application Manager STILL won't recognize the program as being installed.

  Why is this, and it will effect edge animate receiving updates when they are released from the Application Manager is not even realizing that there isntalled the program?

  * Other information *.

  I'm running OS X 10.8.3

  Hi, people.

  I think it works correctly now.  Let us know if it is fixed on the side!

  Thank you

  -Elaine

• How to get a zip file when publshing edge animate.

  On the web, I saw a video on how to do an application of your dashboard project animate (http://www.lynda.com/home/Player.aspx?lpk4=127570 & playChapter = Falsein).  I tried to watch this video, but when I publish my project, no .zip file is not created. Any suggestions?

  Heathrowe and Resdesign:

  Thank you very much!!!

  Zipped and uploaded the file and then it's OK: created the application and

  installed on a phone.  Wasn't working 100% but I think I can work

  outside. (Has to do with the code).  > BTW: is the part of the key of the video file

  required only if you want the application on the market.

  Svein-> torus

  2014-01-29 resdesign [email protected]>

  Re: How to get a zip file when publshing edge animate.

  created by resdesign http://forums.adobe.com/people/resdesign> in * edge

  Animate CC *-see the full discussion onhttp://forums.adobe.com/message/6064342#6064342

• Black screen when I open edge animate

  When I opened edge Animate, opens with a black screen and doesn't let me do any action and I uninstalled it and I reinstalled it, I Don t know what to do, I have the CC version (2015). Please I need to use the program, what should I do? Thank you

  Try resetting preferences.

  https://helpx.Adobe.com/edge-animate/KB/restore-preferences-edge-animate.html

  The game, November 26, 2015 at 10:07, Yesica Viuche [email protected]>

• I downloaded the programs I needed one month when I bought my plan. Today I connect to my adobe account to download edge animate and he only gave me the trial version! How could it be? I have a plan for full access?

  I downloaded the programs I needed one month when I bought my plan. Today I connect to my adobe account to download edge animate and he only gave me the trial version! How could it be? I have a plan for full access?

  Hello

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• Edge animate CC always allows to use video.js

  Edge animate CC still allows you to use video.js instead of the HTML5 video tag.  I need to integrate close captioning?  Thanks in advance

  You must load the video.js library. Simon Widjaja explains how:loading external scripts in edge animate CC (3.0) | EdgeDocks.com

• Difficulty in finding the way to determine when the video is finished

  Here's the url for this project:

  http://www.mespinach.com/picNpic/

  A video starts playing when project is loaded.  A button to stop the video, then up a little video on the first video.  During this second full video, I would like to delete and the first video is taken.  As it is written currently I use two to accomplish this task.  If someone could show me ho to the determin when the video is finished I will not need to use both.

  Here is my code:

  Import fl.controls.ComboBox;
  Fl.video import. *;
  flash.filters import. *;

  connection: NetConnection var = new NetConnection();
  var connection1:NetConnection = new NetConnection();
  var stream: NetStream;
  var stream1:NetStream;
  var md_obj:Object = new Object();
  var md_obj1:Object = new Object();

  var dsObject:DropShadowFilter = new DropShadowFilter();
  var bvlObject:BevelFilter = new BevelFilter();

  var vidContainer:MovieClip = new MovieClip();

  var vid:Video = new Video (320,240);
  var vid1:Video = new Video (200,150);

  var one_btn:One = new One();
  var two_btn:Two = new Two();
  var three_btn:Three = new Three();

  one_btn.addEventListener (MouseEvent.CLICK, onOne);
  two_btn.addEventListener (MouseEvent.CLICK, onTwo);
  three_btn.addEventListener (MouseEvent.CLICK, onThree);

  function onOne(e:MouseEvent):void {}
  VID1.x = vid.x + 100;
  VID1.y = vid.y + 100;
  1. Width = vid.width - 100;
  1. Height = vid.height - 100;
  vidContainer.addChild (1);
  Stream.pause ();
  STREAM1. Play ("BnBshortSnd.flv");
  STREAM1.addEventListener (Video.Complete, onComplete);
  }
  
  function onComplete (): void {}
  trace ("I'm here!");
  STREAM1. Close();
  vidContainer.removeChild (1);
  Stream.Resume ();
  }

  function onTwo(e:MouseEvent):void {}
  STREAM1. Close();
  vidContainer.removeChild (1);
  Stream.Resume ();
  }
  function onThree(e:MouseEvent):void {}
  }
  one_btn.x = stage.stageWidth *. 75;
  one_btn.y = 50;
  two_btn.x = stage.stageWidth *. 75;
  two_btn.y = 75;
  three_btn.x = stage.stageWidth *. 75;
  three_btn.y = 100;

  one_btn.filters = [dsObject, bvlObject];
  two_btn.filters = [dsObject, bvlObject];
  three_btn.filters = [dsObject, bvlObject];

  addChild (one_btn);
  addChild (two_btn);
  addChild (three_btn);

  Connection.Connect (null);
  Connection1.connect (null);
  Stream = new NetStream (connection);
  STREAM1 = new NetStream (connection1);
  vid.attachNetStream (stream);
  VID1.attachNetStream (STREAM1);

  md_obj1.onMetaData = metadata;
  md_obj.onMetaData = metadata;
  Stream.client = md_obj;
  STREAM1.client = md_obj1;

  stream.play ("http://jimslounge.com/publicDomain/plan9FromOuterSpace.flv" "");

  
  vidContainer.x = 25;
  vidContainer.y = 25;
  addChild (vidContainer);
  vidContainer.addChild (vid);

  function metaData(info:Object):void {}

  }

  Yes, I've tried and it doesn't work.

  However, you can use polling to check the current Netstream time against the amount of time you get in the metadata and dispatches an event when it is appropriate. Something like this:

  import flash.display.Sprite;
  import flash.net.NetConnection;
  to import flash.net.NetStream;
  import flash.events.NetStatusEvent;
  import flash.media.Video;
  import flash.utils.setTimeout;

  import flash.events. *;
  import flash.utils.Timer;

  var nc:NetConnection = new NetConnection();
  var ns:NetStream;
  var duration: number = 0;
  var vid:Video = new Video (300,300);
  var obj:Object = new Object();
  var videoURL:String = "test.flv;

  nc.objectEncoding = 0;
  nc.addEventListener (NetStatusEvent.NET_STATUS, onNCStatus);
  NC. Connect (null);
  addChild (vid);

  function onNCStatus(event:NetStatusEvent):void
  {
  Switch (event.info.code)
  {
  case "NetConnection.Connect.Success":
  NS = new NetStream (nc);
  NS. Play (videoURL);
  NS.client = this;
  startPoll();
  vid.attachNetStream (ns);
  break;
  }
  }

  Poll: var timer = null;
  function startPoll()
  {
  if(Poll==null) {survey = new Timer (500) ;}}
  poll.addEventListener (TimerEvent.TIMER, pollHandler);
  Poll.Start ();
  }
  function stopPoll()
  {
  if(Poll==null) {return ;}
  Poll.Stop ();
  }
  function pollHandler(event:TimerEvent)
  {
  trace (ns.time, "of"), duration;
  If (ns.time > = length)
  {
  stopPoll();
  dispatchEvent (new Event (Event.COMPLETE));
  }
  }

  function onMetaData(info:Object):void
  {
  trace ("metadata: duration =" + info.duration + "width =" + info.width + "height =" + info.height + "framerate =" + info.framerate);

  set the duration, so we can check the completion status
  Duration = info. Duration;
  }

• Receive "installation failed - errors encountered during installation (21). When you try to download Photoshop CC, CC with Lightroom and edge animate CC

  Just bought - receive errors of "installation Failed: errors encountered during installation." (21) after each attempt to download on PC - CC of Photoshop, Lightroom CC and edge animate CC.  Advice?

  You can extract or copy the contents of the installation program.

  Please see the link Installation and launch of the errors in the log. CS5, CS5.5, CS6

  Hope this will solve your problem.

  Kind regards

  Hervé Khare

• Muse / Edge Animate: edge actions can occur when manual cleaning is on?

  I try to plan for an experience of animation I want to add to a project of Muse. I have not yet tried to run this concept still...

  The experience that I intend to take advantage of the manual read head, ability to scrub in Muse for the compositions of edge animate (I use Edge CC version and not Edge CC 2014 for this since there seems to be a bug with the latest version impacting concept I am trying to run).

  A few questions for the community with my thanks:

  1.) if I have stock on any of (main or nested elements) time these actions are going to be trigged during washing of the manual read head?

  2.) I can add elements nested in the main timeline which could "autoplay" and would be managed independently any where in is the game in the timeline panel (think of a pulsating ellipse running in a loop)? If this is not possible, I suppose I could create the loop in an SVG animation using style sheet embedded with the animation sequence that I turn to correct?

  Thank you.

  s

  Yes, you can revert to the previous version, BUT you can not open files saved in 2014... I guess if you're starting from scratch it doesn't matter so much.

• Edge corrupts the files when I add text

  I recently got Adobe Edge animate CC and I'm really excited to use to add better items on my site, but I can't yet go far because after I finished working with my project and save it, when I go to re - open he said there is a java error. Preview of the file in chrome leaves empty.

  By trial and error I've drawn to when I add some text in the file. Every time I added text, recorded and tried to re - open, the file is corrupted. I tried to remove my preferences and re - install but it still happens. I would absolutely use this program, but I'm seriously at my wit's end. Is this a problem in the new update or something (June 2015) or is one of these problems, where he lies to me and I can't find a solution ANYWHERE. I checked the debug file that was created automatically, and it was empty as well. Can someone help me please?

  Don't know what to say, I started to learn about 3 months back with Lynda.com tutorials. Like say EA is a bit crumbly, but Lynda tutorials are usually pretty air tight (some older videos are not so great, I think that EA changed a lot with 2014 - I stand to be corrected, but many of JQuery, I think is no longer part of the EA implemented standard * really need someone who knows to put me directly on this *).

  The only thing I can say is that if you move to labelled frames, try to have slightly shifted the label key-images of animation, then the transition begins 1 tenth of a second to the bottom of the timeline (although that transitions should not be a problem), I tend to follow this practice, (give me all the time to run maybe code!) and I put never any action of the time time of the zero line - I had also a case of a function is called twice while he was on the same chassis as a label (game - from).
  The other time I saw jump/skipping content like this is with memory problems, but usually not in a display of preview in the local browser.

  Test a range of browsers, if you're not already (make a different default browser or drag and drop the html file in the browser window).

  OK, having totally dissed EA, I would say 99% percent of all the my fails was something stupid I had done (or not done). I've not seen a transition from opacity works do not, especially when you can see it working on the line of time - so probably a pretty useless answer really! It has a link to the customer support in the "unstable animate" thread if you do not find a solution.

  Hope that this help somehow =]

• Download animate onboard video problem

  I'm trying to add a video to my project of edge animate, but every time I have to complete the process, it does not appear in the library.  Here's the process I followed:

  1. in the library panel, I click on the + sign next to the tab video

  2. the Browse dialog and I find the video and double click it to add it to the ship's library animate

  3. Animate edge paused for a second, then seems to be ready to continue, but the video never shows up in the library

  The film was created in Premiere Pro. I exported it as a high definition H.264 movie. The file is 760 MB.  The title of the film is Yellowstone.mp4.

  I am able to download other movies that are the same H.264 codec with the .mp4 extension.

  Is there a limit to the size of the video files to animate dashboard?

  When you add any video to the animated project, the video gets copied from the selected location in the folder of composition of edge.

  Your video is very large, it takes a while to copy. And if the copy fails internally, then it will not appear in the library.

  Workaround solution:

  First save the publication somewhere.

  And then manually, copy all these videos of large size in the media of the publication folder.

  Then it will automatically show under Vidoe Library.

  HTH,

  Vivekuma

• can I open an old animated file from adobe with adobe edge animate 2015

  I'm trying to follow a course on lynda.com.  But their course files has been made on adobe animate 2014.  When I try to open the file with adobe animate 2015 it does not?  But the file will not open with the older version of adobe edge animate 2014 either.  Is there a reason or solution for this?

  Animate animate Adobe and Adobe Edge are two different applications, you cannot open the other.