Electric battery query 3750 / 3850

Similar Questions

• Qosmio Q50-10 - need info on brightness on power electric battery

  I'm looking for someone who has the QOSMIO Q50-10 to check the information on the low light that appears when
  the computer is running on battery and after that we're going to restart windows without mains.

  I use FN + F7 I looked in power options, but I don't have a difference when working on current alternative
  The broblem is when I restart the QOSMIO G50 - 10I whithout alternating current.
  I find a settlement in the BIOS on (settings personal battery) I put it to full brightness but nothing

  Maybe it's a function of energy saving?

  Looks like its limiting brightness on battery power in order to preserve the battery.

  Or maybe it has AC power for the big bright screen.

• Power battery X 3750 with 5 switches

  Hi, I know the documentation that it is only possible to connect a maximum of four switches in a power battery configuration. I need to have five switches in a stack of data, it is possible to configure three power switches of a battery and the other two switches in one separate power battery or I have to have four switches with the power of the battery and the fifth stand alone? Hope it makes sense.

  Thank you

  Graham

  With the help of two piles of food is a way to go in this scenario. Your five switches can still generate a data stack. This scenario is also shown in the Q & A.

  Otherwise, you could use a XPS to provide backup power for all five switches.

• laptop battery query

  When I turn on my laptop I message geta indicating the power level is low and I need to replace the battery?

  I found and downloaded thank you

• 1000M, 2000M vs. 10W in a GPU makes a big difference in the life of consumption and electric battery?

  It is a question similar to one that has been asked before, but I want to just make sure.

  I'm about to pull the trigger on a Thinkpad W520 getting and I was wondering whether to get the system with an NVIDIA Quadro 1000 M graphics card or the 2000 M. the latest is a $250 upgrade, double the CUDA cores, uses 55W rather than 45W, and from what I've heard is that they are essentially the same chip, but the 2000 M is 50% more powerful than the 1000 M.

  I tried searching on these two, but I'll still have trouble deciding. It is worth the upgrade? Is energy use much more of a difference? (I don't know a lot about vs 45W 55W). It will make my system run much hotter? I probably wouldn't make a difference now, but I thought the 2000M would be more future-proof, since it is twice as powerful.

  Thank you!

  
  

• Error message, unbalanced power supplies, battery switch, cisco 3750 x

  Hello

  A new Member switch has been added. There seems to be a power supply problem as alerted in the newspapers of the switch, as shown.

  Journal:

  % PLATFORM_STACKPOWER-4-UNBALANCED_PS: electric battery switch 3A unbalanced power supplies

  When I watched this show, research has pointed out this bug; CSCtg20513. The bug suggested orders, below;

  You can enable or disable ports (stop/no closed) battery on the unit which incorrectly reports this error.
  config t
  battery-switch
  Standalone
  no autonomous

  However, these commands have been ineffective.

  See the Version

  Version 12.2 (55) SE3,.

  Any other suggestions to help, is very much appreciated!

  Thank you

  JoBee

  That fix is an earlier version, SE2, SE3 is not down like 1 of the service version that is why he can not work

  12.2 (55) SE3 is almost to the State deferred as well as I would upgrade to a more recent image which now has 4 years of

  Have you tried to manually reposition the power stacks

• Battery on the L50T-A196 Satellite problem

  Hello

  I bought the Satellite L50T-A196 a year ago and rarely used on battery.
  Now, when disconnecting the electricity, battery fall quickly (about 30-40 min) up to 9% and the weird thing it remains 9% more than 2 1/2 hours before draining completely.

  I googled this problem and found many ways to calibrate the battery, but none worked.
  Any help would be appreciated.
  Thank you

  To be honest I don't never heard such behavior of the battery. Rest at 9% for more than 2 1/2 hours?
  It's very strange.
  Make it completely empty and load all night again. What happens when you do this? The same thing again?

• Satellite L300D-13s - disk drive will eject when booting on battery

  When to start my Satellite L300D-13 s on power electric battery drive ejects when starting upwards and then he won t keep any kind of CD, DVD or CD-rom discs however it works fine when starting on the grid.

  The battery is fully charged and there is no other reason why it shouldn't t work.
  Can anyone help?

  Windows Vista 32-bit.

  Hello

  > When starting my Satellite L300D-13 on power electric battery of the disk drive ejects when starting upwards and then he won t keep any kind of disc
  It's really strange, sometimes it is hard to believe that this would be possible

  I m not quote that if the reader of CD/DVD may be affected and cause this problem but nothing is impossible and that's why I think you should talk to the ASP in your country and have to explain the whole story I think guys won't believe something may be possible, but in my opinion the CD/DVD drive must be verified.

  Good luck buddy

• Satellite U300 - battery or not?

  Hi all

  I just bought a satellite Satellite U300 and I hope you will excuse my ignorance, but I'm new in the world of laptops!

  First of all, I would like to know whether it is better to use the laptop with or without the battery inside (I don't move my office). Some people tell me that it's better to let inside, some say it's better to use the laptop without the battery so the battery life will be extended and he'll always be ready for use.

  Second, what happens when I leave the House for a few months or more? Should I leave the battery on the inside then or not, and what happens to my data if the laptop is turned off for so long?

  Thank you all for your help and sorry again to ask stupid questions!

  Bebecigim

  These questions are not stupid, and it's really interesting different opinions how you can find about it. Perhaps most people will not agree with me, but my opinion is that you should not remove the battery. Portable manyfacturers use the latest technology and batteries used today are much better from a few years.

  What you can do is to occasionally run on power electric battery. I do it once a week. Just remove the power running and continue to work on battery power.

  If you want to leave your laptop for months only thing you should do is to stop the laptop regularly using START > shut down option. Remove adapter from the electricity on the wall.
  What happens to your data? Nothing. After a few months connect you your laptop to the power running, start your laptop and you will have access to all your data.
  Just for example: I have the drive external HARD with all my important data recorded thereon. I don't use it so often, but all saved data are here.

• AAA RADIUS 3750 x

  Hello!

  I'm troubleshooting an installation of battery new 3750 x - everything is wonderful save two issues, being the RADIUS. I have reflected the config a another pile of identical work but I am having no love with my DEPARTMENT. Debug RADIUS auth showed this - any ideas?

  I tried a few things including specifying my management interface VLAN as source for RADIUS, but it had no effect.

  I am running 15.0 (2) SE-IPBASEK9-m

  10:22:43: RADIUS: AAA Attr not supported: interface [221] 4

  10:22:43: RADIUS: 74 74 [tt]

  Thanks for your help

  HI John,.

  Take a look at this.

  AAA group Group1 radius server

  Server 10.10.220.130 auth-port 182 acct-port 1813

  The RADIUS authehtication listen on port 1812. Try this reconfiguration as below.

  AAA group Group1 radius server

  ACCT-port of the server 10.10.220.130 auth-port 1812 1813

  Concerning

  Najaf

  Please rate when there is place or useful!

• Portege Z30T - A - 10 X unstable connection Wireless

  Hello Forum users!

  I would need a Council to deal with my wireless adapter. It connects OK when the laptop is after the restart, but if I take the it of sleep mode, it has problems to connect to any wireless network. Usually, it connects after 10 minutes to turn off/on repetitive adapter. Sometimes, the adapter also removes the connection to Skype call center. This behavior is independent of the network, including the adapter. What could I do?

  Thank you!
  Jakub

  Hello

  Did you notice a difference if you use laptops with power running or using it on power electric battery?

• Problems with Atheros WLAN on Satellite L750D

  Hello

  I got the L750D SATELLITE with Atheros AR9002WB-1NG Wireless Network Adapter (with the latest driver), but this card has serious problems in the detection of signals transmitted by the router. With previous and other laptops that I never had problems with the connection to the internet, however my new laptop is forcing me to sit in an area of 4 meters around the router. How can I fix?

  -check the latest driver updates
  -re-installed the driver
  -checked on the forums how to solve this problem
  -tour of my bluetooth

  Looking forward to a response.
  Greetings from the Netherlands.

  Is - this general problem with this laptop, or just when you use it on power electric battery?
  Check the power settings for WLAN and place it on the option high performance.

• Universal BIOS update series satellite A500

  Hi all

  There is an update release of v1.50 date 01/07/2010, universal Satellite A500 BIOS.

  Now, it seems that my event handler I have a little problem with my current version of BIOS because I get the message:

  Log name: System
  Source: Microsoft-Windows-HAL
  Date: 2010-11-02 01:15:34?
  Event ID: 12
  Task category: no
  Level: error
  Key words: (1).
  User: n/a
  Computer: Tosh
  * Description: *.
  * The firmware of the platform has corrupted the memory through the transition from the previous system power. Please check for updated for your system firmware *.

  I read some horror stories about Toshiba users who have tried a BIOS update, although Windows like Toshiba recommends, and their computers got fried. It seems that it was a problem experienced by Toshiba (I mean that they knew the question users face tried updating the BIOS thei), which they tried to resolve with this latest version of the BIOS.

  Has anyone tried this update and I share his opinion? Is it a go come or not?

  Thank you guys.

  EBM

  Post edited by: F_Bullitt

  To be honest I ve read also several horror stories in this forum on the BIOS update, but the question is do this people do BIOS update following the instructions of Toshiba.
  Can you imagine that some people make recovery installation or update of the BIOS on power electric battery? And when the cell phone cut because of the empty battery then it is Toshiba's fault of course.

  I did several times on different laptops upgrade BIOS and everything goes well.
  The fact is, all available BIOS updates are tested.

  Can you please send us the exact laptop model name or model number? I want to check the BIOS update is available for your model of laptop.

• Can satellite A100-847 - I replace my current HARD drive with a SATA2 HARD drive?

  Hello

  I am currently using a Satellite A100-847 with a 100 GB SATA 5400 RPM HARD drive. I plan to change with a Western Digital WD2500BEKT 250 GB SATA2 16 MB 2.5 inch laptop hard drive 7200 TRM. Is it possible to replace my current HARD drive which is SATA with a one SATA2?

  And if not what is my best option upgrade of the mine to a HARD fast (7200 RPM) disc?

  Hello!

  Yes, you can replace the current drive with a SATA2 HARD disk. You already have a SATA interface, and this means that you can use each HDD with SATA interface.

  I don't know Mr. but as far as I know the Satellite A100 cannot use the speed of SATA1. This means that the new HARD drive maybe won't work with SATA1 speed but there is no significant difference in performance.

  A HARD drive with 7200 RPM is really fast, but don t forget it produces more heat and needs more electric battery. A HARD disk at 5400 RPM is perhaps fast enough for you?

  Good bye

• How to turn off Auto brightness? using windows 8

  Hello

  This problem of auto brightness is been bothring for a long time now and I can't find any fix for this at all the

  the display will:

  -Bright when seen on screen a white web page, document, photo

  - and it dims down when seen on the screen a dark web page / documents or photo

  I have tried everything I can find in the forums to stop it but no success at all the :'(

  Note 1:

  I changed the settings and turn off auto brightness in windows 8 advaced power plan settings

  

  Note 2:

  I tried to disable the Vari-Bright AMD but the windows 8 AMD Catalyst Control Center, but there is no option to turn off :/

  

  Note 3:

  I turn off the sensor monitoring Service in services.msc menu... but yet did the thing :/

  

  Note 4:

  I disabled Intel Display Power saving technology intel graphics and media panel and... with all this, however, the problem of brithtness auto is not resolved :/

  

  now... really, I have no idea what to do with all this attepemts and can't get rid of it, I start to lose hope I can use my laptop without the screen change BRIGHTNESS on its own, watching a film and surfing the web with the screen flickers to fits in the background, it's a terrible situation, I see not just why HP or other manufacturesee gpu this as a solution to what anyone It is just a continuous headache that I can't get rid of

  Please, I need your help guys, if anyone has found a solution to this... Tell me (and others who might have the same problem) how to fix

  Thank you very much

  Found a solution that worked for me crazy (because it was also me).

  I'm on a HP ENVY 17 Notebook PC with Intel HD graphics card (4600):

  Right click on desktop

  Select "Graphics properties" (to adjust the Intel graphics settings)

  Select "Power".

  Click on 'on battery '.

  Turn off "display energy saving technology.

  I did this, so that an electric battery and it solved the problem immediately. Spent in AC, and it was still stable.

  I hope this helps!