Eliminate the problem of objects.

Similar Questions

• eliminate the problem of film clip

  I try to load a clip in scene 1 and then with a close button attached to the film to try to remove the MC of scene 1. What I am doing wrong? Load works fine... the unloading is not
  
  attachMovie_btn.onRelease = function() {}
  This._parent.attachMovie ("MCTrio", "trio_mc", 1);
  trio_mc._x = 275;
  trio_mc._y = 200;
  };
  
  and I have a close button on the loaded MC
  
  on (release) {}
  _parent.removeMovieClip ("MCTrio");
  }
  
  Thanks Brian
  

  Try:

  on (release) {}
  _parent.trio_mc.removeMovieClip ();
  }

• Emergency aid the problem of adobe flash cs4 animation

  I am working currently on the amimation project, after that I am referring to:

  
  

  http://www.pixelhivedesign.com/Tutorials/Flash+matrix+-+animated+code+effect/

  
  

  and successfully make an animated background matrix, then the problem, some object or symbol or animation I put on the background will automatically become 'transparent', who can see the word matrix pass through it, I am completely newbie on this software and any help is welcome

  BTW, I use adobe flash cs4
  

  You must manually create an empty movieclip and place it on the stage in the upper left corner on a background layer of the main timeline.  Then, assign it an instance name of "backgroundMC" This movieclip is where the code will place all the matrix elements to be created.

  To create an empty movieclip, in the toolbar at the top of the page, select Insert-> new symbol-> Movieclip... assign a symbol name as "Virgin mc" or something so that you know what it is to return to the main document choose edition--> the main Document, and then drag a copy of the new movieclip to the upper-left corner of the stage.

  When it is still selected, assign it an instance name "backgroundMC" in the properties panel, where it says "" (you can name it what you want, but I'm just using background MC for this example to work.

  If you did this correctly, the matrix will be limited now to be in this context movieclip and you can place another object above it in the other layers.

• Problem with the persistent store & object

  Hello

  I store 2 types of persistentObject in PersistentStore. I find the problem when retrieving the Typeobjet2. The code is:

      private void GetPersonFromPhone() {
          synchronized(store) {
              data = (Vector) store.getContents();
          }
          System.out.println("\\\\\\\\\\\\\\\\\\  Into GetPersonFromPhone Data = " + data.size());
          PersonInfo pi = null;
          Person p = null;
          for ( int i = 0; i < data.size(); i++) {
              System.out.println("Object Got i = " + i + " - " + data.elementAt(i).getClass().getName());
              if (data.elementAt(i).getClass().getName().endsWith("PersonInfo")) {
  

                    .....
                    data.removeElementAt(i);
              }
          }
           p = null;
          pi = null;
          return;
      }
  
      private void SavePersonsToPhone() {
          PersonInfo info;
          System.out.println(" To SAVE Persons = " + personVec.size() + " To Store Data Size = " + data.size());
          for (int i=0; i < personVec.size(); i++) {
              info = new PersonInfo();
              data.addElement(info);
              p = null;
              info = null;
          }
          System.out.println("Now DATA size = " + data.size());
          synchronized(store) {
              store.setContents(data);
              store.commit();
          }
         // Dialog.inform("Success Stored");
  
          info = null;
          return;
      }
  
   Results
  

  Nobody GOT = name = Mr John Micheal, Email =, URL = store/samples/pictures/Quiver_Tree.png, Send = true
  Size PersonVector = 1
  Object obtained I = 3 - src.se.PersonInfo
  Nobody GOT = name = Peter Simon, email = [email protected], URL = store/home/user/iBeloved/photo1, Send = true
  Size PersonVector = 2
  GOT people = 2 size = 3 data store

  Add new record

  Person - McMillan Desilva, [email protected] , SentEmail = false

  To SAVE the people = 3 to the data store size = 3
  Save I have 0 - name = Mr. Micheal John = Email, URL = store/samples/pictures/Quiver_Tree.png, Send = true
  Added Mr. John Micheal, Email = true to vector to the store
  I save 1 - name = Peter Simon, email = [email protected], URL = store/home/user/iBeloved/photo1, Send = true
  Peter [email protected], Email added = true to vector to the store
  Save I have 2 - name = McMillan Desilva, Email = [email protected], URL =, Send = false
  Added McMillan detailed [email protected], email = false to Vector to the store

  The NEXT TIME that I RAN the APPLICATION

  Nobody GOT = name = Peter Simon, email = [email protected], URL = store/samples/pictures/Cascade.png, Send = true
  Size PersonVector = 1
  Object obtained I = 3 - src.se.PersonInfo
  Nobody GOT = name = Peter Simon, email = [email protected], URL = store/home/user/iBeloved/photo1, Send = true
  Size PersonVector = 2
  GOT people = 2 size = 4 data store

  To SAVE the people = 2 to the size of the data store = 4
  Save I 0 - name = Peter Simon, email = [email protected], URL = store/samples/pictures/Cascade.png, Send = true
  Peter [email protected], Email added = true to vector to the store
  I save 1 - name = Peter Simon, email = [email protected], URL = store/home/user/iBeloved/photo1, Send = true
  Peter [email protected], Email added = true to vector to the store
  DATA size now = 6

  You CAN SEE FROM THE results, how the data changes and incompatibilities. Sometimes he gives good resutls sometimes incompatibilities. Someone can say, where I'm going wrong or what makes the results of the get code.

  Thank you

  Not looked at seriously, but there seems to be a coding bug in this piece of code:

  for (int i = 0; i)< data.size();="" i++)="">
  System.out.println ("object got I I =" + i + "-" + data.elementAt (i) .getClass () .getName ());
  If (data.elementAt (i) .getClass () .getName () .endsWith ("PersonInfo")) {}
  ....
  data.removeElementAt (i);
  }
  }

  Say that the vector has 3 elements inside.  You spend the first at the beginning of the second loop, I = 1, and the for loop see data.size () 3.  Then you deal with the second and delete.  Then when you go back to the loop for I = 2, and data.size () = 2, so you never treat a third.

  Of course, logic could just as easily result in code by jumping the elements of the vector.

  Maybe that's your problem?

• My first object of the entity and with the problems of the compilation.

  Dear gurus!

  I want to make an extension of the entity 'ExtBankAccountsEO' object issued by oracle, in order to use the create method to set the default values.

  I followed the "Oracle Application Framework Developer's Guide".

  I downloaded the complete content in/apps/abdellah/schema/Server oracle to my pc and use JDeveloper

  to make the extension 'ExtBankAccountsEOExImpl.java' and 'ExtBankAccountsEOEx.xml '.

  And now, the problems begin. I was not able to compile ExtBankAccountsEOExImpl.java in JDeveloper, because it lacks a lot of classes/packages.

  When I copy ExtBankAccountsEOExImpl.java into/apps/abdellah/schema/Server oracle (on the server), I have also some compilation errors, but they are all in the form

  cannot find symbol

  symbol: class number

  location: oracle.apps.iby.schema.server.ExtBankAccountsEOImpl of the class

  public number getProgramApplicationId()

  Ditto for the string and date of the exception. They all begin with a lowercase letter (string instead of the string, the number instead of number and so on).

  so I guess there must be a class somewhere where all these are defined. Delivered classes like ExtBankAccountsEOImpl are full of 'string' and 'number '.

  Please guide me!

  Thank you - thank you - thank you!

  I installed the decompiler that you suggested, and it showed appropriate types:

  

  And now the extension compiles without a problem on the server! I made the mistake of putting the decompiled version of ExtBankAccountsEOImpl (with tiny string, the date and number) in the same directory as ExtBankAccountsEOImpl.class, and therefore the compiler gave errors.

  How can I now replace the old EO with the extension?

  JDeveloper is a .jpx file:

  
  

  <>
  Name = "EOProj1".
  SeparateXMLFiles = 'true '.
  PackageName ="" >
    
       
       
       
       
       
       
       
    
     <>
  Name = "server."
  FullName = "oracle.apps.iby.schema.server.server"
  ObjectType = "JboPackage" >
       
          
       
    
    
       
    
  

  I can't find anyting with jpx on the server:

  -bash - $3.2 locate jpx

  -bash - $3.2

  Can it be done using the customization on the web page link?

  Best regards

  Christian

• Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Techincal Suport...  (INVALID_QUERY: XMLList object)?

  After a number of years of service, my Adobe Premiere CS4 gives me the following error message:

  Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Technical Support...  (INVALID_QUERY: XMLList object).

  I use this software on an old Dell desktop computer to two year with many members and drive.  It is a stand-alone application, not connected to a server.

  Anyone have any ideas on how to solve this problem?

  I think it has to do with the central resource is no longer supported.  Everything works OK if you ignore the message?

• What is the problem with the conversion of objects with gradients to the gradient mesh?

  What is the problem with the conversion of objects with gradients to the gradient mesh?

  Radial gradients are special, and it could become difficult edit the gradient mesh resulting.

  Take the layer apnel and inspect your objects. You will find a clipping mask the cracks inside.

• the upgrade to windows 7 will eliminate current problems

  My wife's cell phone is currently running Vista. One day the phone let out this blood, and that the said laptop curdeling scream has been infected. I contacted IYOGY, and apparently the laptop had several viruses. They cleaned remotely and installed their anti virus, THE SHIELD. He has never been the same. It takes like 15 minutes or more to start, and that it runs slower than you can imagine. I thought maybe I could upgrade to windows 7. Who would solve the problem?

  My wife's cell phone is currently running Vista. One day the phone let out this blood, and that the said laptop curdeling scream has been infected. I contacted IYOGY, and apparently the laptop had several viruses. They cleaned remotely and installed their anti virus, THE SHIELD. He has never been the same. It takes like 15 minutes or more to start, and that it runs slower than you can imagine. I thought maybe I could upgrade to windows 7. Who would solve the problem?

  In place upgrade likely would do nothing to solve your problem.  If your system is still host malware, that may very well be the source of your problems, the upgrade would not wipe out unless you do a clean install.  Your best option is to either a destructive restore to reinstall Vista on the recovery partition (if your computer has a restore partition - check your owner's manual) or by using the installation diskettes that may have come with your system and opting to allow the reader to be wiped.

• How can I eliminate the auto advance with advanced actions?

  In the menu slide of course, I have several interactive objects click boxes, etc..  They are all to do not pause the project as well so that the slide will automatically in advance.  My problem is that I want to auto-advance. I want the learner to select one of the four options menu (click on the box), but I also advanced actions on this page to indicate when something is finished.  (See screen capture below properties)  I can't modify or eliminate the advanced action, so this isn't an option.

  How can I set this slide so that I can keep the existing, fast action and demand that they select a menu option before moving on to the next slide (click box)?

  

  I understand something else, that your question is not on 'no progress' for all slides (for which you may use the TLCMediaDesign approach) but you talk about a slide in Menu. You already have several interactive objects on this slide, right? What is their purpose? Is there a reason why you do not use their ability to pause the slide? Maybe post a screenshot of the slide with the timeline when you explain the purpose of these interactive objects.

  Lilybiri

• How to eliminate the split after the restoration of browser screen?

  FF 29.0.1 running on OS x 10.8. From time to time, from FF (after killing him) and the restoration of all sessions, results in each window with tabs displayed in a split screen. The upper part is about 4 "high, followed by a seam, then the site itself. Resizing can completely eliminate the useful portion--unable to shrink beyond the joint.

  Open a new tab results in a screen divided; Open a new window appears normally.

  The problem occurs only after the restoration of the tabs - never when FF is normally closed.

  Suggestions?
  Thank you.

  Hi nxtr, your test Mode without fail gives strongly suggests that one of your extensions is to create the gap.

  If you have not checked recently updates to the extension, you can do it from the page modules. Either:

  • Command + shift + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, above the list, click on the "gear" button Check for Updates.

  If they are already up-to-date, you can try to disable selectively non essential. I hope that the problem is caused by one of.

• Piano roll Editor: is it possible to eliminate the spaces between the many notes at once?

  Using the step input method, I entered a number of 1/2 notes in the piano roll Editor.

  

  Then I selected all my notes and decided to shorten all 1/4 notes after realizing that the pace was too slow.

  

  The problem is that I now have many empty spaces between the notes of 1/4:

  Is it possible to eliminate all the spaces between the notes at once with all selected notes notes?

  Or I have to manually move each 1/4 at the end of the previous note footnote 1/4.

  I think there must be a quicker way to do this.

  Select all under the Edition of the piano roll Editor menu or command button has

  Then enter the end of a single note and all selected notes will also expand.

• I tried to solve the problems to the existing solution in this forum. I still get error 50405

  Dear,

  I use USB-6009 for controlling pumps, valves, and two Mass Flow Control. Each two cycle I get error 50405. I tried to solve the problems in the existing solution in this forum, but the error always showing each cycle 2 of the operation. I enclose my VI filled for the expertise, I was wondering if its design issue? Home shot of the error screen. Thank you.

  You have certainly a few design issues.

  The structure of stacked sequence tends to create more problems than it solves. I the have not used in new programs since version 1.2 of LabVIEW (in 1989). A state machine is a much better choice of architecture.

  Local variables can cause race conditions, copies of additional data, poor performance and it is difficult to debug code. There are special cases when they should be used, but these conditions are not in your code. Just wire directly on the terminals of control at the scene, the data will be used.

  My guess on the likely cause of your error is the use of several DAQ Assistant to perform the same task (with different data values) in each image in the sequence structure. With the arcitecture state machine that I suggested above, you would need one. The DAQ Assistant trying to be clever on the configuration and tasks of closing, but different instances do not speak with each other, so they don't know when to release the resources.  You might be able to do work if you used the DAQmx screw standard you have done with the task of digital output.  You do not connect the error lines of the DAQ Assistant for you can be missing errors.

  Indicators and controls without legend may be a troubleshooting nightmare. Please give each control and seeing a unique label. If you don't want the visible label on the front, you can use the properties of the control to hide. If you want multiple controls to have the same visible text for the operator, use the legend.

  Learn how to use subVIs. Most of the code in the 6 images of the structure of internal sequence is identical. By converting only a Subvi, you would reduce considerably the size of the diagram and if you ever need to modify the code, it should only be changed in one place - the Subvi.

  The while loop in frame 0 of structure of outer sequence is a "gourmet" loop He's going to run as fast as possible and seize all available CPU resources until the user presses a button. Put a wait function (ms) in the loop with expectation of ~ 100 ms. best, learn how to use the Structure of the event for user input.

  The second loop inside of the structure cases inside does nothing and can be removed.

  Many of these objects suggest that you have a programming background using the text-based programming language.  LabVIEW uses a paradigm of data flow that avoids largely for things such as the structure of the sequence and the local variables. I recommend that you work through the tutorials online on the Getting Started with LabVIEW.

  Lynn

• [Q] can Vision track multiple objects in the same area - objects that might cross?

  Hello

  Sorry for this long title, but this is my question.

  Can Vision track multiple objects in the same area - objects that could cross?

  Because I'm able to do, extraction of XY, but it seems that "IMAQ County objects ' don't follow framework after but framework opposed, but extract the coordinates XY always in the same way, as for example from top and whenever he sees an object, it retrieves the XY, but if the objects pass through (then it will extract XY without worrying that the objects was the earlier but just based on"scan from top to bottom").

  That's why I open this topic in the forum of Vision no part: http://forums.ni.com/t5/LabVIEW/Sort-XY-by-closest/td-p/2440428

  Thank you

  Sébastien

  Thank you for your response.

  My problem is that we work with very small insects and the shape/color is the same for all.

  Then the solution is: Let's wait for "IMAQ County objects 3 ' then .

  Thank you

  Sébastien

• How to create the SyncManager CSharp object

  Greetings!

  I am tryint to send a means to a sequence of testStand from a DLL of Chernobyl... it seems that I have to use the SyncManager, but I can't understand where the syncmanager object is defined:

  XXX foo = seqContext.Engine.GetSyncManager ("myNotification");

  The problem is that I can't determine what should be the type "xxx".  I would have thought it would be a "SyncManager", but this doesn't seem to be a valid type.

  I'm referencing: NationalInstruments.TestStand.Interop.API and NationalInstruments.TestStand.Interop.UI

  What is the correct type?

  Thank you

  Tom M.

  Hi Tom,

  you add the TSSyncLib.dll as a COM object to your c# project

  Then it should work

  Jürgen

• A few questions about the quality of the displayed video, object to scale, and a funny question intervenes in my VI

  Hello

  I am doing a project for pattern recognition and lead to a VI (Please find attached). There is something that I don't know and would like to ask:

  1 VI works, but in a funny way: most of the time I have to pass the "Create Template/model search" button twice in order to get thin VI work (there were only a few times I just need to click once on the button). What is the problem here and how to fix it?

  2. I understand that IMAQ game model works with RGB images. So is there anyway that I can always get pass images RGB by IMAQ learn boss, IMAQ Match, while the resulting 2 'Template' and 'Image' are always displayed in color mode.

  3. are there in any case I can still detect the object if the scale becomes a problem (I need to go far from approaching the object)? To resolve this problem, I need to use IMAQ matches geometric pattern, which I learn from somewhere in the forum it took much more time to match my result comparing IMAQ Match jacquard?

  Thank you very much.